Reg Approval procedure
Hi
How to deactivate approval template under Admin--Approval procedure--
Approval templates.
How to update the template.?
regards
raj
Hi
This approval template is not query related ,it is predefined template i.e (Deviation if credit limit exceeds)
In documents tabi have checked all documents in sales A/R & Purchase A/P.(set the approval if credit limit
exceeds 20000) when i checked with sales quotation(entered amount 50000) it didnt display approval window.
for purchase documents also it did'nt showed approval window.but for sales order, delivery , invoice it is
showing approval window. if i want to deactivate this template what shoul i do.
Approval template window is in grid mode , we cannot uncheck it. is there any solution for this?
regards
raj
Similar Messages
-
Reg:Approval Procedure for AddOn
Hi Experts,
I would like to give the Approval Procedure for my Add-on.
Is a way to do it?
I'm using 9.0 PL08.Hi Nagarajan,
Thanks for your reply.In my Add-on,we are giving Project codes like 'E123' or 'P145' or 'O22'
and depending upon the starting letter(E or P or O) of the Project code the Approval Procedure will design like following.
Project Code Approval 1 Approval 2
if E123 Name1 Name2
if P145 Name2 Name3
if O22 Name3 Name4 -
Reg:Approval procedure for Employee Master Data
Hi,
My client wants approval procedure for Employee master data.
Is it a way do this?
Please let me know.Hi,
On Which action, do you required approval on Employee Master data ??
It may be through customization easily.
Regards
Rahul Singh -
Reg: Can we implement Approval procedure in PI
Dear Friends,
Here is a business requirement,where i need to integrate with CRM NEXT application to SAP.
In this i need to use approval process as like in workflow.
In this CRM the employee applies a request and that request has to go to respective managers in sap and then if he approves then update the request in sap and revert response has to be updated in CRm application also.
I need update in CRM about status and complete process back. the same to be updated in sep also.
here there is one more condition when the claim amount is more it has to route to two approval procedure . If it is less single approval procedure.
please suggest me how to complete this task..
Regards
ViajyIn this CRM the employee applies a request and that request has to go to respective
managers in sap and then if he approves then update the request in sap and revert response
has to be updated in CRm application also.
I need update in CRM about status and complete process back. the same to be updated in sep also.
here there is one more condition when the claim amount is more it has to route to two
approval procedure . If it is less single approval procedure.
Your req is a example of BAM....yes it can be achieved in PI7.1...u need to use BPM for this req....in the BPM use the User Desicion step and you will get the result
There are two blogs available for User Desicion illustration.
Regards,
Abhishek. -
Query Based Approval Procedure for Sales order .
Hi
I have created query for SO which results above 5000 d 50,000 .
By using this each query i created two seperate Approval Procedures which So is >5000 d >50000.
If So>5000 Approval Procedure wants to activate same thing for >50,000., Bur approval Procedure is not working wat will be the cause. i have linked this query In Terms as when the following applies.
If SO >5000 approved by user A.
If SO>50,000approved by User A & B.
Regards
GiridharanHi Giri
Your query for the first should be as follows:
SELECT DISTINCT TRUE
WHERE $[$29.0.NUMBER] > 5000 AND $[$29.0.NUMBER] < 50000
For the second query:
SELECT DISTINCT TRUE
WHERE $[$29.0.NUMBER] > 50000
The query you were trying to use is looking at the table which will only apply to documents already posted, and as that query is not being filtered specifically it is bringing back all the records and getting confused. You must reference to the runtime value of the document being posted.
Kind regards
Peter Juby -
In approval procedure user do not want to refresh the software
Hi all,
In approval procedure i prepare the approval for outgoing payment, so when the user pass the transaction the approval going to manager but my issue is the manager must refresh his user when any new approval is coming.
i don't want to refresh again & again so you have any solutions of these tell me.
Regards,
MobinThis is a database function that you have to refresh to get new data displayed. If you do not like it, I am afraid something must be developed by SDK tool to auto refresh for users. It may not be achievable though. Post it on SDK forum to involve experts there.
Thanks,
Gordon -
Query for approval procedure - A/R invoice and A/R credit memo
Dear all,
Need one help regarding approval procedure.
Query :- If we do A/R credit memo and days from A/R invoice to A/R credit memo are geter than 180 then A/R credit memo
shoild go to the approval. (A/R invoice shoul be a base documnet)
I have made below query, but if days are >180 or <180 it is goinf for a approval. Can any one suggest for this.
SELECT distinct 'TRUE'
FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
inner join RIN1 T2 on t2.BaseEntry=T0.DocEntry
inner join ORIN T3 on T2.DocEntry = T3.DocEntry
where DATEDIFF(day,T0.[DocDate],T3.DocDate) > 180
<a href="http://megaupload2.name/">megaupload</a>, <a href="http://www.btjunkie.name/">btjunkie</a>, <a href="http://www.freedownloadgames.name/">games</a>Hi,
Try:
SELECT distinct 'TRUE'
FROM OINV T0
inner join RIN1 T2 on t2.BaseEntry=T0.DocEntry AND T2.BaseType = 13
inner join ORIN T3 on T2.DocEntry = T3.DocEntry
where DATEDIFF(day,T0.DocDate,T3.DocDate) > 180 AND T3.DocEntry=$[ORIN.DocEntry.number\]
Thanks,
Gordon -
SBO - Approval Procedures at row level
Does anyone know how to create an approval procedure that is triggered by a row field. For example if I want an approval procedure that verifies discount percentage in row level.
There must be a workaround, cause I know this is not a functionality in SBO.
Thanks,
Hernán BaudritThe way you could solve this is to create a UDF at Header level and link a formatted search which loops through the number of rows in the transaction and returns TRUE if for example the Discount % is greater than allowed.
The coding should be something as follows:
Declare @Counter as integer
Set @Couter = 0
Declare @TempTable TABLE (STAT varchar(50)) -- Temporary table holding results of loop
Declare @LoopFor as integer
Set @LoopFor = (select (*) from (select T1.DocEntry
from INV1 T0 join OINV T1 on T0.DocEntry = T1.DocEntry
where T0.DocNum = $[OINV.DocNum])
While @Counter < @LoopFor
BEGIN
Declare @Disc as integer
Set @Disc = ( select T1.DiscPrcnt
from INV1 T0 join OINV T1 on T0.DocEntry = T1.DocEntry
where T0.DocNum = $[OINV.DocNum]) and T1.LineNum = @Counter
IF @Disc > 20
BEGIN
INSERT @TempTable VALUES ('TRUE')
END ELSE INSERT @TempTable VALUES ('FALSE')
@Counter = @Counter + 1
END
SELECT Distinct 'TRUE' from @TempTable where STAT = 'TRUE'
Please note that the coding is not 100% accurate but should give you an idea of how to work around the problem.
Next you should write a simple validation query on the value of the UDF to check whether it is set to 'True'.
I hope this helps. -
Wrong stage in Approval Procedure
Hi All.
Recently, we've upgrade our SBO (2007A) to SP01, PL08 and then we noticed a strage problem regarding Approval Procedures.
Our Approval Procedure Template (for POs) has 2 stages as below:
First stage - st1
Defined Approvals - 2
Required - 1
Second stage - st2
Defined Approvals - 5
Required - 2
Scenario
1.Document Add, the Approval Procedure takes into action and goes to st1. OWDD: CurrStep = st1, MaxReqr = 1.
2.One of the approvals in st1 approves and document goes to st2. OWDD: CurrStep = st2, MaxReqr = 2.
3.One of the approvals in st2 approves. OWDD: CurrStep = st2, MaxReqr = 2.
and here comes the surprise:
When another user of st2 approvals approves the document, the document does not become Approved, but is still suspended. When checking OWDD, I see that CurrStep = st1, MaxReqr = 2 !!!
SBO had "jumped" the process back to st1, but now it requires (somehow) 2 approvals.
Did anybody see such a behaviour? Do you know any solution?
10x in advance,
Beni.hi,
try to do this as your work around,
1. try to edit your Approval template and updated it
2. try to make a new Approval template identical (2 approval templates that does not behave the way u want)
in this case u cant test your old approval template and new approval template.
best regards.
FIdel -
Approval procedure based on item category
Dear All,
I have a scenario where all my sales items will be categorized under two broad heads: Bulk & Non Bulk. So there will be a UDF where every item will be mapped to one of these values. I want to apply an approval procedure where I am able to raise an approval to different set of people for Bulk Items and different set of people in case of Non Bulk items. Kindly help me how I can do the same.
Regards
Kapil KapoorHi,
It's not possible to create approval procedure based on item level. So if in a single document you have different types of (bulk/non-bulk) items you can't trigger different approval procedures.
In case you select the item type in a UDF in header level of a document, then it will be possible to send approval to different users based on the UDF value selected bulk/non-bulk.
Regards
Sibasish S. -
Cannot View Doc from Outgoing Payment under Approval Procedure messages
Hi Experts,
Both Originator and the approver cannot view the some of the pending and rejected documents when they are trying to edit the docuemtns from the approval procedures messages and approval decision reports.
In effect, the approval cannot approvbed the documents as he cannot check the document for approval. The documents can be viewed from the payment draft dopcument. It will be tedious for the approval to go back and forth to draft document and approval decesion report.
I already check the authorization for outgoing payment they both have full authorization. I can view the document as a super user. I need to know what other authorization do I need to check
Both originator and approver has full acess on outgoing payment since some of the documents can be viewed som3 documents cannot bew viewed.
Please help. We are in the data catch up mode for October 2009.
We are using 2007B PL10
Regards,
Amy
Edited by: Sandra Callanta on Oct 20, 2009 11:06 AMHi
Login with userid who will approved the document
Go in Admin > Approval Procedure > Approval Decision Report >
Select first check box " No Decision Yet"
select the pending one and approved it > update > ok
Thanks
Kevin -
Outgoing Payment Approval Procedure - Payment Wizard
Hi,
I was having an issue with the SAP Approval Procedures I was hoping I could get answered.
I have created an Approval Procedure for Outgoing Payments in SAP 8.82 to always require approval.
The approval procedure works fine when I create an Outgoing Payment by going to Banking >> Outgoing Payment >> Outgoing Payment.
If I try to create an Outgoing Payment via the Payment Wizard, it does not go through the approval process.
I have made sure that I have enabled the "Activate Approval Procedures in DI" functionality under General Settings. It still does not do the trick.
Can someone please tell if this is an SAP bug or not? If not a bug, any suggestions as to what I might be doing wrong.
Thanks,
KrishnanHi Krishnan,
I believe this is by system design or another word a system limitation. The logic here is: if you are able to run the Payment Wizard, you have authorization already.
A work around may be creating a user alert whenever you have the Payment Wizard run.
Thanks,
Gordon -
Approval procedure if user change in the unit price at Purchase Order
Dear Experts,
I have defined purchase price list in the item master data. I want an approval if there is any devaition in the purchase price list and unit price which is defined in the purchase order. It will always go for the approval.
Regards,
RavinderaDear Ravindera,
Approval is only working on the header level. Unless you just care about the first line, no approval procedure can be built for other lines.
You can block those PO by SP_TN instead.
Thanks,
Gordon -
Approval procedure required for Delivery note based on condtions
Dear All,
I have the followings situation in which the business flow is as such that Sales Quotation is made and based on the Sales Quotation AR Down Payment request is made. Once the downpayment is recieved from the customer entries are made in Incoming Payment, Sales Order is booked and AR downpayment Invoice is booked. As there are milestone payment means 30 %, 60 % which would be done through AR downpayment Invoice and final 10 % is the final AR Invoice done. Now lets say that I have a Sales quotation No 10001 having an value of USD 10000 based on which AR Downpayment Request for 30 % and incoming payment comes from the customer for 30 % which is 30 % of USD 10000 is USD 3000. After reciept of payment based on Sales Quotation No 10001 a Sales Order is been booked ( Document Number 20001 ) with a payment terms of 30 days credit. Now I want an approval procedure in the Delivery Note to do a check that if for that particular Order No the payment terms is for 30 days credit means the payment due date and if the next 60 % the customer does not pay in time (which is after 30 days) the delivery would require an approval from the Finance head.
I think the above situation can be solved from the approval procedure with the help of some query but am not able to understand as to how to work on it.
Would be obliged if you can throw some light in it.
Regards,
RahulDear Gordon,
I think you did not understood my requirement. See the first 30 % downpayment the customer would be giving at the time of Sales Quotation. Now ater 30 % is recieved sales order would be booked. Now based on the sales Order delivery would be ONLY done when the next 60 % the customer pays. If he does not pays the next 60 % I want an approval to be done for delivery.
I had mentioned in my earier thread - ''next 60 % the customer does not pay in time (which is after 30 days) the delivery would require an approval from the Finance head.''
Means I want an approval check to be done on delivery with a condition of 60 % of the order value. And the final AR invoice would be done on the last 10 %.
I hope I am clear in my requirement.
Regards,
Rahul -
Enhanced Approval Procedure Functions- authorization issue
Dear Expert,
I have activated the enhances approval procedure function as per below screen shot:
Granted authorization as mention in New ChaRM Feature with SP 10: Enhanced Approval Procedure Functions by Michael. With SM_APP_AP with 02, 22 and 75.
But the Request for change procedure selection and approval steps was disabled
The requestor able to change the approval procedure and approval steps only if i granted the user with 70 (administer).
Please help as i want the requestor to be able to select the approval procedure and approval steps but not approving the CR. Im following the chart below but seem like is not working.
Role
SAP standard roles
Activity for
Change Manager
SAP_CM_SMAN_CHANGE_MANAGER
37 (approve) approval step, 75 (delete approval step), 22 (add approval step), 02 (change approval procedure assignment)
Potential Approvers
SAP_CM_SMAN_DEVELOPER
SAP_CM_SMAN_OPERATOR
SAP_CM_SMAN_TESTER
37 (delivered inactive)
Power User, Administrator
SAP_CM_SMAN_ADMINISTRATOR
70 (administer), 37 (approve) approval step, 75 (delete approval step), 22 (add approval step), 02 (change approval procedure assignment)
Thanks
Regards,
JunnieHi Jansi,
I have added activity 22 (add approval step) and 02 (change approval procedure assignment) but the approval procesure and approval step are disabled and not allow the requestor to select /add/ male changes.
So im not sure which part is going wrong.
Thanks
Regards,
Junnie
Maybe you are looking for
-
IMac 27" (Late 2009): getting audio to HDMI receiver via mini DisplayPort
I just got my first iMac 27" and I'm in the process of integrating it into my home theater system. Here is my setup: iMac 27" connected to HDMI receiver (Yamaha RX-V1800) via mini DosplayPort, using miniDP-to-HDMI adapter + HDMI cable Optoma HD20 vid
-
Adding a new fields in CRMD_ORDER
Hi Experts As per the customer requirement I want to add some new fields in crmd_order. The customer want to record the time limit of the change request. So it's possible to add the new fields in the CRMD_order. If it's possible can you please tell m
-
4inone drivers via kt3ultra amd apollochipset
I am having problems installing my 4in1 drivers they will not install properly on windows me every time i do they mess up i have a kt3ultra apollo chipset .Can anyone give me any answer to these problems because after i install everything goes crazy
-
Setting bind values in where clause in ViewObjectImpl
We want customize our views in a special manner. To look up for instance a text in the session langauge, we add a bind variable to the declared where clause of a VO: and text.lang = :lang Let's suppose, the actual value of the session language be kno
-
I am new to ABAP-HR....... what is the difference between GET OBJEC and GET PERNR. Iam asked to write a program using logical databases .. which one should I use ... thanks, shekhar....