Reg: AUTO Exend for tablespaces

Hi,
I want to have a discussion with the AUTO EXTEND option for Tablespaces in oracle 9.2.0.4.0.
Actually i am having one INDEX or USERS tablespace and for eg if index is having 15 datafiles till now and 15th datafile in that INDEX is running with AUTO EXTEND option.
I created with a SIZE of 3000mb and next extent as 500 mb.When the space is filled with 3000 mb, i believe it will be using the NEXT EXTENT 500 mb.
So here what i want if that NEXT Extentis also filled and upto how much space and to how much extend this AUTO EXTEND OPTION will be useful.
What is the MAX size for this AUTO EXTEND and where it will grow if those spaces are filled ?
When can I add another datafile for that without causing any problem ?
I am having another doubt on these datafiles already filled i.e 14 datafiles which
are stored in database ? How long those datafiles in tha INDEX tablespace will be useful for future ...as we are going on adding the datafiles at some extent space problem will come .So how to analyse that and what are the precautions we have to take?
Sorry if am asking any basic or silly question over here....
Please Clarify my above confusion....
Thanks in Advance...
suresh.

Suresh
Extend will allocate max space of your hard disk

Similar Messages

Auto TO for movement type 531 - Receipt By Product

Hi All,
I have assigned a sloc to WM to make it WM managed sloc , now after doing a MB1A for an Internal order for movement type 531 , i am getting the Transfer requirement created in background for the material doc , but not the TO. Infact the automatic transfer order creation is activated for the movement type , but the automatic TO is getting created automatically for other existing sloc's .Any idea am i missing any configuration ?
Reg
Benny

Hi,
This topic has been dicussed many times on this forum. Please find information on SAP online help:
Auto TO for TR
http://help.sap.com/erp2005_ehp_04/helpdata/EN/97/91cfd2571211d4b3210050045571f7/frameset.htmA
Auto TR for OD
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f8406c4afa11d182b90000e829fbfe/frameset.htm
Immediate TO
Please check OSS note 566090
Maybe you are looking for immediate TO...
Regards,
Csaba

Notification for Tablespace Full

This is 10g Grid Control.
I want to be notified by email when a tablespace space usage reaches warning threshold, but couldn't make it work. Here is what I did.
1). Notcifation method has been set and tested.
2). In Preferences -- Notification -- Rules, I created a new one called Tablespace Usage. In which I added a Metris of Tablespace Free Space and checked Three states (Critical, Warning, Clear) for which I want to receive notifications.
But I don't get any notification for Tablespace Space usage even I know for sure some of tablespaces have reached > 90%.
What is wrong here?
Thanks for your reply.

YOu can set on the debugging as well. The script thats being called is sysman/admin/scripts/problemTbsp.pl. In the emd.properties file, you can change the PERL_???? to turn on DEBUG.
stop/start the emctl.
To fire the trigger again - edit the metrics, set it high (must have both warning and critical set due to some bugs) 99 and 100. Set the page refresh to every minute. The metric should clear. Then go set the metric really low say 10 and 20. Again set the refresh to minute - leave it on the screen. It should fire - showing an entry in the bottom half of the screen - regardless of notifications or rules or whatever. This is the first step in diagnosiing this problem.
Note this script problemTBSP.pl has been very buggy - be sure you have the latest version of the script.
$ more problemTbsp.pl
# $Header: problemTbsp.pl 01-jul-2005.11:11:17 rreilly Exp $
It has special circumstances in there for dictionary vs locally managed, auto extend vs non auto etc etc.
The sql its running is in the script - its not rocket science.
my $sql = "select a.tablespace_name,a.meg, a.maxmeg,a.file_name,a.file_id,a.ts#,
a.blocksize,a.flag, "
. " b.freebytes, b.maxfreebytes,nvl(c.ts#,-99) "
. " from "
. " (select f.tablespace_name, (f.bytes)/1048576 meg, "
. " (f.maxbytes)/1048576 maxmeg, f.file_name, f.file_id, "
. " ts.ts#, ts.blocksize, "
. " DECODE(BITAND(ts.flags,3),1,ts.dflminlen,0) flag "
. " from sys.ts\$ ts, sys.dba_data_files f "
. " where ts.contents\$ = 0 and ts.online\$ = 1 "
. " AND ( ts.bitmapped = 0 OR (ts.bitmapped != 0 AND bitand(ts.flags,3
) = 0)) "
. " AND bitand(flags,2048) != 2048 "
. " and f.tablespace_name = ts.name) a, "
. " (select tablespace_name,NVL(sum(bytes)/1048576, 0) freebytes , "
. " NVL(max(bytes/1024), 0) maxfreebytes "
. " from sys.dba_free_space group by tablespace_name) b, "
. " (select distinct s.ts# from sys.seg\$ s where s.maxexts < 2100000000 an
d s.maxexts - extents < 2 "
. " and exists (select 1 from sys.sys_objects so where so.header_block = s
.block# and "
. " s.file# = so.header_file and s.ts# = so.ts_number)) c"
. " where a.tablespace_name = b.tablespace_name and a.ts# = c.ts#(+) order
by a.tablespace_name, a.file_name";

How do I set up a port on a SPA8000 to auto answer for a 2 way intercom/paging?

I have a customer with an analog pbx system now that I am changing over to a sip system. They have a few lines that need to still have analog connectivity so I am installing a Cisco/Linksys SPA8000. One of my issues is with a 2-way PA system between their main office and shop. They have a Viking Model HF-3W paging system presently that allows them to communicate both ways without having to pick up a phone at the shop. I need to set the SPA8000 to have one port auto answer for this paging system but I am not sure how.

See attached LV86 example. Open the properties dialog of the knob for more info about its configuration.
Attachments:
Log knob LV86.vi ‏7 KB

HT4098 How do I turn off auto-renew for the Guardian?

Trying to turn off auto-renew for The Guardian. From PC.
I did the following:
1. Launch iTunes on your computer
2. Choose Store>Sign In from the iTunes menu.
3. Enter your Apple ID and password when prompted.
4. Choose Store>View My Account. You may be asked to re-enter your Apple ID password. Click
View Account. (I chose "iTunes Store", in the side bar, since the word "Store" in the menu bar didn't list "My Account". Then I chose "Account" in Quick Links, on the right-hand side of the screen. I got the "Account Information" ok.)
5. From the Account Information screen, scroll to the bottomof the page to the Settings section.
Then it said to: 6. Click "Manage" to the right of "Subscriptions".
The word "Subscriptions" does not appear in the Settings section. Nothing in the Settings section takes me to a page on which to manage my subscriptions.

Hi
Read this Subscribe to iTunes Match - Apple Support
This includes a section about turning off auto renew.
Jim

Auto-complete for the email addresses in the mail app is not working

Hi, could somebody kindly help, please?
I have just got a new iphone 5s after my old 5 got broken. When I got the new 5s one I had to restore everything from the back-up copy I had on my ipad or in my icloud, whatever.
The problem is that in the standard mail app which you have at the bottom of the screen auto-complete for the email addresses is not working on this new iphone. However, it still works on the ipad.
Can I turn it on somewhere or is it a bug? I remember When my old iohone was new as well as the ipad and ipod, I did not have to turn on anything. The recent email addresses list (appears when one starts to type an address in the address bar when writing a new email message) appeared automatically. And on this phone it doesn't appear at all. It doesn't suggest me any recent or whichever email addresses and I am really lazy to type an address each time.
Could this be solved?
Many thanks in advance for the eventual help.
Olia

I am also getting same problem...................anybody please help.

Auto approval for self registration request in OIM 11G R2

Hi all,
We have a requirement where we want end users to be able to self-register without needing any sort of approval. We are using OIM 11G R2 with the latest patchset.
The way to do it in 11G R1 is explained in the following document:
[http://docs.oracle.com/cd/E21764_01/doc.1111/e14316/unauth_selfservice.htm#BABFEIBF]
But now that R2 does not have any request templates, we are not sure how to do this. Any help will be greatly appreciated. Thanks for your time.
-sandeepc

refer this.
Configuring Auto-Approval for Self-Registration - Fails due to Organisation

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
thanks

for windows you should have an exe and a 7z file. put both in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Reg:Single Check for Multiple Vendors

Hi Experts,
I want to Issue a Single check for all vendor open items...
For this is I created one Group Key and assigned in the vendor master record, but while doing the payment separate check issuing for each vendor,
any idea

Hi,
Can you check the below thread of urs.
[Reg:Single Check for Multiple Vendors]
In addition to the above, please make sure that in OBVU, the check box separate payment for each ref is deselected for your questioned comapny code.
You would have continued your earlier thread instead, rather than a new thread.
Thanks,
Srinu

Auto Confirmation for combined order with quantity distribution

Dear All,
we need your help that we have using the auto-confirmation for normal production order , but got the problem in combined order confirmation for final operation , in final operation we are not getting quantity distribution with respect to child order.
please suggest any BAPI is there?

Not possible in standard system.

Is there a way to turn on auto complete for text that has to be entered repeatedly? I don't want to use a pop up list.

Is there a way to turn on auto complete for text that is repeated? I don't want to use a pop up list.

No, not in Number for iOS.

Auto feed for 4x6 photos moves to back but HP photo paper does not pick-up . What can I do to fix.

Auto feed for 4x6 photos moves to back but HP photo paper does not pick-up . What can I do to fix. Photosmart C6180, MS Vista
Have tried one sheet, multiple sheets, new pack of photo paper etc.

Hi there,
This article should help as it covers cleaning your pickup rollers. Check out the video and give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

ORA-01536: space quota exceeded for tablespace 'SYSTEM'

Hi All,
Please help me to understand the below issue. I am trying to create a table as below. Connected as APPS user.
SQL>create table test_ts(id number) tablespace APPS_TS_TX_DATA
ORA-00604: error occurred at recursive SQL level 1
ORA-01536: space quota exceeded for tablespace 'SYSTEM'
ORA-06512: at line 2
Below are the details of the user
SQL>select * from user_ts_quotas
        where tablespace_name = 'APPS_TS_TX_DATA'
TABLESPACE_NAME     BYTES     MAX_BYTES     BLOCKS     MAX_BLOCKS
APPS_TS_TX_DATA     929038336     -1     113408     -1
SQL>select * from user_ts_quotas
        where tablespace_name = 'SYSTEM'
No Rows Returned.

Hi,
Thanks for the response. There is no QUOTA defined for SYSTEM user, so it is UNLIMITED, No?
Below are the details of "SYSTEM" tablespace. Is there any issue with this?
TABLESPACE_NAME           BLOCK_SIZE INITIAL_EXTENT       NEXT_EXTENT           MIN_EXTENTS            MAX_EXTENTS
SYSTEM                  8192               16384         16384                1                     505

How can I set up auto respond for email

How can I set up auto respond for email?

Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Any thoughts on auto sourcing for a non catalogue request?

Any thoughts of auto sourcing for a non catalogue request?
If i have a Contract Purchase Agreement set for a certain Category and if i use the same category in the non catalogue request purchase requisition will the workflow automatically generate the PO?
Following set to Y
CONTRACT_REQUIRED_FLAG
INCLUDE_NON_CATALOG_REQ_FLAG
USE_CONTRACT_FLAG
How the price will be determined in the PO in such cases?

Hi,
You need to define the sourcing rule, ASL and default assignment sets and map the CPA in the ASL setup.
This will drive the autocreation of PO.
Thanks,
PS.

Reg: AUTO Exend for tablespaces

Similar Messages

Maybe you are looking for