Reg Blocked Export Documents Runtime Error

Hi..
I am using the transaction '/SAPSLL/BL_DOC_SD_R3' to see blocked export documents.......
Now when i run it for a plant and about 40 thousand sales orders... it is going for a runtime error.....
I need to know for how many records can i run this transaction at one time.. ......
Regards.

Gautham..
The selection screen stuff did not help....
This is the error which i am getting...
Runtime errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.

Similar Messages

Reg: 4.7 SR1 Runtime error

Hi All,
We have installed 4.7SR1 on SunSolaries, the installation was finished successfully. When I execute the transaction SICK it thrown an error saying that
OS release SunOS 5.10 Generic_137111-01 sun4v is not supported with this kernel (620)
Please update that, how we can resolve the error.
Regards,
Venu

Hi
That is because Kernel 620 is not supported on Solaris10.
Kernel 620 was already end of support.
You can find this information from PAM and SAP note.
http://service.sap.com/pam
http://service.sap.com/sap/support/notes/803429.
Instead of Kernel 620
Kernel 640 is can be applied on R/3 4.7 SR1,
which is supported until 31.03.2013.
Please download latest kernel 640 from SMP and apply.
http://service.sap.com/patches
The messeage on SICK will be removed.
This is the way SAP want to do.

Runtime Error in comment area??

My situation is not obvious to me but I can't figure it out.
I'm getting a runtime error in line 2 for syntax BUT in line 2 is just a comment block.
The runtime error pops up in eclipse but not in netbeans.
Any clues anyone?
[SOLVED] JavaScript was the issue.
Edited by: sarah.x on Feb 29, 2008 8:39 AM

We need system info and crash details:
Working with your Operating System’s Tools
Mylenium

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.

Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards.

Runtime error while posting a document (FB70/FBS1)

Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?

Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa.

Getting a runtime error in block alv that field symbol has been assigned

hi to all experts ,
im getting a runtime error that field symbol has not been assigned in functionmodule reuse_alv_block_list_display
i tried a lot to rectify the error ,im unable to do it thats i have posted here
*& Report ZHAI_ALV_BLOCK_LIST
REPORT ZHAI_ALV_BLOCK_LIST.
type-pools:slis.
tables:mara.
DATA:BEGIN OF IT_MARA OCCURS 0,
        MATNR LIKE MARA-MATNR,
        MBRSH LIKE MARA-MBRSH,
        MATKL LIKE MARA-MATKL,
        END OF IT_MARA.
data: begin of IT_DESC OCCURS 0,
         MATNR like MAKT-MATNR,
         MAKTX like MAKT-MAKTX,
     end of IT_DESC.
data: begin of IT_MARD occurs 0,
        MATNR like mard-matnr,
        WERKS like mard-werks,
        LGORT like mard-lgort,
        LABST like mard-labst,
      end of IT_MARD.
data: IT_FCAT TYPE SLIS_T_FIELDCAT_ALV ,
      WA_FCAT LIKE LINE OF IT_FCAT,
      IT_FCAT1 type slis_t_fieldcat_alv,
      WA_FCAT1 LIKE LINE OF IT_FCAT1,
      IT_FCAT2 TYPE SLIS_T_FIELDCAT_ALV,
      WA_FCAT2 LIKE LINE OF IT_FCAT2,
      wa_layout type SLIS_LAYOUT_ALV,
      it_event type SLIS_T_EVENT,
      wa_event like line of it_event,
     wa_layout like line of it_layout,
      V_REPID LIKE SY-REPID.
select-options:so_matnr for mara-matnr.
start-of-selection.
perform f_select_data.
DEFINE ADD_CATALOGUE1.
WA_FCAT-COL_POS = &1.
WA_FCAT-fieldname = &2.
WA_fcat-tabname = &3.
wa_fcat-emphasize = &4.
wa_fcat-ref_tabname = &5.
APPEND WA_FCAT TO IT_FCAT.
END-OF-DEFINITION.
DEFINE ADD_CATALOGUE2.
WA_FCAT1-COL_POS = &1.
WA_FCAT1-fieldname = &2.
WA_fcat1-tabname = &3.
wa_fcat1-emphasize = &4.
wa_fcat1-ref_tabname = &5.
APPEND WA_FCAT1 TO IT_FCAT1.
END-OF-DEFINITION.
DEFINE ADD_CATALOGUE3.
WA_FCAT2-COL_POS = &1.
WA_FCAT2-fieldname = &2.
WA_fcat2-tabname = &3.
wa_fcat2-emphasize = &4.
wa_fcat2-ref_tabname = &5.
APPEND WA_FCAT2 TO IT_FCAT2.
END-OF-DEFINITION.
perform f_build_fcat.
*perform f_build_fcat1.
perform f_build_fcat2.
PERFORM F_BUILD_LAYOUT.
PERFORM F_BUILD_EVENTS.
PERFORM F_BLOC_DISPLAY.
*&      Form f_select_data
FORM f_select_data .
select matnr
       mbrsh
       matkl
     from mara into table it_mara where matnr
in so_matnr.
if it_mara[] is not initial.
select matnr
       maktx
       from makt
       into   table it_desc
       for all entries in it_mara
       where matnr eq it_mara-matnr.
endif.
if it_desc[] is not initial.
select matnr
       werks
       lgort
       labst
       from mard
       into table it_mard
       for all entries in it_desc
       where matnr eq it_desc-matnr.
endif.
ENDFORM.                    " f_select_data
*&      Form f_build_fcat
FORM f_build_fcat .
ADD_CATALOGUE2:
'1' 'MATNR' 'IT_MARA' 'C500' 'MARA',
'2' 'MBRSH' 'IT_MARA' 'C600' 'MARA',
'3' 'MATKL' 'IT_MARA' 'C300' 'MARA'.
ENDFORM.                    " f_build_fcat
**&      Form f_build_fcat1
FORM f_build_fcat1 .
ADD_CATALOGUE1:
'1' 'MATNR' 'IT_DESC' 'C500' 'MAKT',
'2' 'MAKTX' 'IT_DESC' 'C600' 'MAKT'.
ENDFORM.                    " f_build_fcat1
*&      Form f_build_fcat2
FORM f_build_fcat2.
ADD_CATALOGUE3:
'1' 'MATNR' 'IT_MARD' 'C500' 'MARD',
'2' 'WERKS' 'IT_MARD' 'C600' 'MARD',
'3' 'LGORT' 'IT_MARD' 'C200' 'MARD',
'4' 'LABST' 'IT_MARD' 'C300' 'MARD'.
ENDFORM.                    " f_build_fcat2
*&      Form F_BLOC_DISPLAY
      text
--> p1        text
<-- p2        text
FORM F_BLOC_DISPLAY .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    I_CALLBACK_PROGRAM             = SY-REPID.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = wa_layout
    IT_FIELDCAT                      = it_fcat
    I_TABNAME                        = 'IT_MARA'
    IT_EVENTS                        = it_event
IT_SORT                          =
I_TEXT                           = ' '
TABLES
    T_OUTTAB                         = IT_MARA
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = wa_layout
    IT_FIELDCAT                      = it_fcat1
    I_TABNAME                        = 'IT_DESC'
    IT_EVENTS                        = IT_EVENT
IT_SORT                          =
I_TEXT                           = ' '
TABLES
    T_OUTTAB                         = IT_DESC
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    IS_LAYOUT                        = wa_LAYOUT
    IT_FIELDCAT                      = IT_FCAT2
    I_TABNAME                        = 'IT_MARD'
    IT_EVENTS                        = IT_EVENT
IT_SORT                          =
I_TEXT                           = ' '
TABLES
    T_OUTTAB                         = IT_MARD
EXCEPTIONS
PROGRAM_ERROR                    = 1
MAXIMUM_OF_APPENDS_REACHED       = 2
OTHERS                           = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " F_BLOC_DISPLAY
*&      Form F_BUILD_LAYOUT
      text
--> p1        text
<-- p2        text
FORM F_BUILD_LAYOUT .
wa_layout-edit = 'X'.
wa_layout-window_titlebar = 'MOHAMMED ABDUL HAI'.
wa_layout-zebra = 'X'.
ENDFORM.                    " F_BUILD_LAYOUT
*&      Form F_BUILD_EVENTS
      text
--> p1        text
<-- p2        text
FORM F_BUILD_EVENTS .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
   I_LIST_TYPE           = 0
IMPORTING
   ET_EVENTS             = IT_EVENT
EXCEPTIONS
   LIST_TYPE_WRONG       = 1
   OTHERS                = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT IT_EVENT BY NAME.
READ TABLE it_event INTO wa_event WITH KEY NAME = 'TOP_OF_PAGE' bINARY
SEArch.
if sy-subrc eq 0.
wa_event-form = 'F_TOP_OF_PAGE'.
ENDIF.
MODIFY IT_EVENT FROM WA_EVENT INDEX SY-TABIX TRANSPORTING FORM.
READ TABLE IT_EVENT INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND' BINARY SEARCH.
WA_EVENT-FORM = 'F_USER_COMMAND'.
MODIFY IT_EVENT FROM wa_event INDEX SY-TABIX TRANSPORTING FORM.
ENDFORM.                    " F_BUILD_EVENTS

Hi,
When does this runtime error occur? When displaying output (calling FM) or.....
I copied your coding and made a few minor changes and It's working fine for my now:
REPORT ZHAI_ALV_BLOCK_LIST.
TYPE-POOLS:slis.
TABLES:mara.
DATA:BEGIN OF it_mara OCCURS 0,
matnr LIKE mara-matnr,
mbrsh LIKE mara-mbrsh,
matkl LIKE mara-matkl,
END OF it_mara.
DATA: BEGIN OF it_desc OCCURS 0,
matnr LIKE makt-matnr,
maktx LIKE makt-maktx,
END OF it_desc.
DATA: BEGIN OF it_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
labst LIKE mard-labst,
END OF it_mard.
DATA: it_fcat TYPE slis_t_fieldcat_alv ,
      wa_fcat LIKE LINE OF it_fcat,
      it_fcat1 TYPE slis_t_fieldcat_alv,
      wa_fcat1 LIKE LINE OF it_fcat1,
      it_fcat2 TYPE slis_t_fieldcat_alv,
      wa_fcat2 LIKE LINE OF it_fcat2,
      wa_layout TYPE slis_layout_alv,
      it_event TYPE slis_t_event,
      wa_event LIKE LINE OF it_event,
*      wa_layout like line of it_layout,
v_repid LIKE sy-repid.
SELECT-OPTIONS:so_matnr FOR mara-matnr.
START-OF-SELECTION.
PERFORM f_select_data.
DEFINE add_catalogue1.
    wa_fcat-col_pos = &1.
    wa_fcat-fieldname = &2.
    wa_fcat-tabname = &3.
    wa_fcat-emphasize = &4.
    wa_fcat-ref_tabname = &5.
    append wa_fcat to it_fcat.
END-OF-DEFINITION.
DEFINE add_catalogue2.
    wa_fcat1-col_pos = &1.
    wa_fcat1-fieldname = &2.
    wa_fcat1-tabname = &3.
    wa_fcat1-emphasize = &4.
    wa_fcat1-ref_tabname = &5.
    append wa_fcat1 to it_fcat1.
END-OF-DEFINITION.
DEFINE add_catalogue3.
    wa_fcat2-col_pos = &1.
    wa_fcat2-fieldname = &2.
    wa_fcat2-tabname = &3.
    wa_fcat2-emphasize = &4.
    wa_fcat2-ref_tabname = &5.
    append wa_fcat2 to it_fcat2.
END-OF-DEFINITION.
PERFORM f_build_fcat.
PERFORM f_build_fcat1.
PERFORM f_build_fcat2.
PERFORM f_build_layout.
PERFORM f_build_events.
PERFORM f_bloc_display.
*& Form f_select_data
FORM f_select_data .
SELECT matnr
mbrsh
matkl
FROM mara INTO TABLE it_mara WHERE matnr
IN so_matnr.
IF it_mara[] IS NOT INITIAL.
    SELECT matnr
    maktx
    FROM makt
    INTO TABLE it_desc
    FOR ALL ENTRIES IN it_mara
    WHERE matnr EQ it_mara-matnr.
ENDIF.
IF it_desc[] IS NOT INITIAL.
    SELECT matnr
    werks
    lgort
    labst
    FROM mard
    INTO TABLE it_mard
    FOR ALL ENTRIES IN it_desc
    WHERE matnr EQ it_desc-matnr.
ENDIF.
ENDFORM. " f_select_data
*& Form f_build_fcat
FORM f_build_fcat .
add_catalogue2:
'1' 'MATNR' 'IT_MARA' 'C500' 'MARA',
'2' 'MBRSH' 'IT_MARA' 'C600' 'MARA',
'3' 'MATKL' 'IT_MARA' 'C300' 'MARA'.
ENDFORM. " f_build_fcat
**& Form f_build_fcat1
FORM f_build_fcat1 .
add_catalogue1:
'1' 'MATNR' 'IT_DESC' 'C500' 'MAKT',
'2' 'MAKTX' 'IT_DESC' 'C600' 'MAKT'.
ENDFORM. " f_build_fcat1
*& Form f_build_fcat2
FORM f_build_fcat2.
add_catalogue3:
'1' 'MATNR' 'IT_MARD' 'C500' 'MARD',
'2' 'WERKS' 'IT_MARD' 'C600' 'MARD',
'3' 'LGORT' 'IT_MARD' 'C200' 'MARD',
'4' 'LABST' 'IT_MARD' 'C300' 'MARD'.
ENDFORM. " f_build_fcat2
*& Form F_BLOC_DISPLAY
* text
FORM f_bloc_display .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = wa_layout
it_fieldcat = it_fcat1
i_tabname = 'IT_MARA'
it_events = it_event
*IT_SORT =
*I_TEXT =
TABLES
t_outtab = it_mara
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = wa_layout
it_fieldcat = it_fcat1
i_tabname = 'IT_DESC'
it_events = it_event
*IT_SORT =
*I_TEXT =
TABLES
t_outtab = it_desc
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = wa_layout
it_fieldcat = it_fcat2
i_tabname = 'IT_MARD'
it_events = it_event
*IT_SORT =
*I_TEXT = ' '
TABLES
t_outtab = it_mard
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " F_BLOC_DISPLAY
*& Form F_BUILD_LAYOUT
FORM f_build_layout .
wa_layout-edit = 'X'.
wa_layout-window_titlebar = 'MOHAMMED ABDUL HAI'.
wa_layout-zebra = 'X'.
ENDFORM. " F_BUILD_LAYOUT
*& Form F_BUILD_EVENTS
FORM f_build_events .
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 0
    IMPORTING
      et_events       = it_event
    EXCEPTIONS
      list_type_wrong = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
SORT it_event BY name.
READ TABLE it_event INTO wa_event WITH KEY name = 'TOP_OF_PAGE' BINARY
SEARCH.
IF sy-subrc EQ 0.
    wa_event-form = 'F_TOP_OF_PAGE'.
ENDIF.
MODIFY it_event FROM wa_event INDEX sy-tabix TRANSPORTING form.
READ TABLE it_event INTO wa_event WITH KEY name = 'USER_COMMAND' BINARY
SEARCH.
wa_event-form = 'F_USER_COMMAND'.
MODIFY it_event FROM wa_event INDEX sy-tabix TRANSPORTING form.
ENDFORM. " F_BUILD_EVENTS

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

Error:Adobe document services error: SOAP Runtime Exception: CSoapException

Dear All,
While executing an adobe form I am facing the following error:
Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport :
Can you please suggest how the error can be rectified?
Thanks and regards,
Atanu
Edited by: Atanu Dey on Feb 18, 2008 5:31 PM

Hi, For solving this do one thing:
The problem is In ECC the service AdobeDocumentServicesSec was set up in SM59 but nothing was configured for SSL. So you have to change this to:
AdobeDocumentServicesSec.
Thanks
please reward points

ABAP runtime error in FBV2 Change parked document using workflow

Hi,
When selecting screen template variant in tcode FBV2 change parked document, I get abap runtime error DYNPRO_NOT_FOUND
Tcode- FBV2
Program- SAPLF040
Screen- SAPLF040 0310
Main Program - SAPMF05V
Information on were terminated.
Program SAPLF040 - in " %_CTL_END "
In the source code you have the termination point in line 50 of the (Include) program " <SYSINI> "
How can we solve this error. We are on ECC6 with release 600.
Thanks,
Mark

Hi Mark,
We have this same issue in transaction F-65
I believe that when a new screen template is configured, a new screen is generated within function group F040. A later action (applying a hotpack??) has removed this screen, but the config (in table T021D) still points the processing to the screen even though it has been removed.
Did you find a solution? We want to get the screen back as it is still valid to use this screen template in the business
Thanks
Ben

Runtime error while logging in/uploading documents

We have a FD services activated intranet SharePoint 2010 site and our external users have been facing problems logging in to the site from their end. They face a runtime error when they want to login:
Runtime Error
Description:
An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely
(for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable
on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set
to "Off".

<configuration>
    <system.web>
        <customErrors mode="Off"/>
    </system.web>
</configuration>
Notes:
The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.

<configuration>
    <system.web>
        <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
    </system.web>
</configuration>
We as internal users don't face this issue. What could be a possible reason?

Just an update:
External users are able to log in but get intermittent runtime error messages while trying to upload documents. All users from the same external network are facing this issue.

ABAP Runtime Error at the time of saving of Document Through CV01N tcode

Dear Experts
We have install seprate DMS Server for storing various documents of different module.
While saving of Document through Transaction CV01N one small screen gets pop up.Which is as follows
Check in Document:KPro
Storage Category   Description
ZCITY123               DMS
I am selecting above line from Kpro, then when i click on save system gives ABAP Runtime Error.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          21.10.2008 18:35:26
Short text
     Function module "PROJECT SYSTEM" not found.
What happened?
     The function module "PROJECT SYSTEM" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLSDCE" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
I am not understanding why this dump is coming.
How i can come up from this issue.Pls guide me.If any customizing is required pls give the steps
Thanks in Advance.
Regards,
Sandeep Theurkar

There is a programming error somewhere.To get a solution quickly, do as follows:
1. Turn off all badi's, user exits and whatever you have changed in standard SAP.
2. Rerun - if it still fails - search in SAP notes for relevant notes
3. If it doesnt fail - you have an error in your own programming
4. If you are on relevant Support packages etc, send a message to SAP.
Regards,
Espen Leknes

Runtime error LOAD_PROGRAM_NOT_FOUND for ARE document.

Hi All,
when I am creating or posting ARE document thru tcode J1IA101 & J1IA301 ,I am clicking on Printing check box & when I am going to save it .It is giving me error printing parameter is not set &
after pressing enter it is giving runtime error, which is as follows:
Runtime Errors         LOAD_PROGRAM_NOT_FOUND
Exception              CX_SY_PROGRAM_NOT_FOUND
What happened?
    There are several possibilities:
    Error in the ABAP Application Program
    The current ABAP program "SAPLJ1IEX" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    or
    Error in the SAP kernel.
    The current ABAP "SAPLJ1IEX" program had to be terminated because the
    ABAP processor detected an internal system error.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
     caught in
    procedure "J_1IEX_PRINT_ARE" "(FUNCTION)", nor was it propagated by a RAISIN
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    On account of a branch in the program
    (CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
    or a transaction call, another ABAP/4 program
    is to be loaded, namely " ".
    However, program " " does not exist in the library.
    Possible reasons:
    a) Wrong program name specified in an external PERFORM or
       SUBMIT or, when defining a new transaction, a new
       dialog module or a new function module.
    b) Transport error
Thanks,
C Singh,

hi all,
please change the access sequence from J1ID to J1IB and include program for printing ARE-3 in program 2 of access sequence J1IB.
regards,
C Singh.

InDesign CS5.5 Problem - Crash during PDF export (Runtime Error)

Hello,
I'm working with Adobe CS5.5 and have a problem with the PDF-export of some of my projects.
The problematic projects are rather big (44-124 pages) with lots of pictures.
The error I get during export is:
[Headline:] Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\...
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information
The program is not specified in the error.
Export works fine for these files on my collegues computer with the same settings (hardware and software are almost a match).
Microsoft Runtime Library was completely reinstalled without solving the problem.
Any suggestions how to solve this problem?
Thank you very much
T.S.

Adobe Community: File Crashing on Output - printing/PDF/other

Adobe document service error: SOAP Runtime Exception

Hello,
I am trying to test an Adobe Form created using the ABAP workbench SFP transaction, and getting the following error.
<b>Adobe document services error: SOAP Runtime Exception: CSoapExceptionTransport : (100101)</b>
These are the steps I am using.
1. Call SFP transaction and select an ADOBE Form.
2. Function key F8 to test
3. Select the Output device and do "Print Preview"
Our configuration is : WAS 6.40 SP11 and corresponding ADS level. We used the standard SAP ADS configuration guide to setup.
Thanks in advance for any reply.
Regards,
PK

Hi PK
it looks like you have a problem with either your Adobe document services or your RFC configuration. In the current ADS Configuration Guide in the SAP Service Marketplace, you find a configuration quick test in chapter 3.4. The results should tell you if this is the issue.
There are 2 tests you can run:
A. Checking the User and Password
This is a small test where you can check that your entries for user, security role, and passwords are correct.
Procedure:
1. Enter the following URL in your web browser:
http://<server>:<port>/AdobeDocumentServices/Config
where <server> is the name of the J2EE engine where the Adobe document services are installed and <port> is the port of the J2EE engine.
Note that the entries in the URL are case-sensitive.
2. The web page of the web service AdobeDocumentServices is displayed. Choose Test.
3. Choose rpdata(test.) .
4. Choose the Send button without entering any parameters.
5. Enter the same user name and password as given in the configuration steps earlier.
6. Choose Submit.
If the configuration is correct, you get the information about the Version number in the response area.
If the configuration settings are not correct, the page does not change and Submit still appears.
B. Checking the ABAP Connection
This is a small test for checking the RFC destination you have created.
Procedure
1. Log on to your SAP system.
2. Call transaction SE38
3. Enter the name of the test report: FP_PDF_TEST_OO.
4. Choose Execute (F8)
If the configuration is correct, you get the Version Information.
If the configuration is not correct, you get a dialog box with fields for user and password. Check your configuration settings and also the entries you made when creating the ABAP connection.
Hope this helps.
Kind regards,
Markus Meisl
SAP NetWeaver Product Management

Whenever I try to print a pdf document I get a message saying there a runtime error, I have adobe r

Whenever I try to print a PDF document, I get a message indicating there is a runtime error, and for me to contact you. My system is Adobe reader 9.3

A runtime error is a computer error that appears in the form of a message box consisting of a particular code along with its corresponding definitions. Usually, a user will notice that the computer becomes noticeably slow before a runtime error appears.
After the runtime error message has been displayed and closed, the software that shows this error would normally close or freeze. In some cases, the operating system will reboot.
A wide variety of errors cause these problems. These include:
conflicts between the TSR (Terminate and Stay Resident Program)
currently running applications
software issues
memory problems
and harmful applications such as computer viruses
With this, the procedures necessary to correct this type of error differs from one case to another. If the runtime error you are experiencing were caused by a TSR then you can simply use the "end task" function of the Task Manager.
If you consequently encounter a runtime error that is persistent, the software that displays the error message has certain issues and problems. You can resolve this problem by visiting the website of the software's developer and downloading and installing all the updates and patches needed for the smooth running of the software. However, if you have already installed all updates and patches and the runtime error message still appears, you can opt to uninstall and reinstall the program.
Another type of runtime error is usually caused by memory issues. In this case, it is a good idea to first contact the developer of the application that caused the error message. More often than not, they can provide you with a possible set of solutions. But if their given solutions cannot resolve the issues, you need to contact the manufacturer of your computer or motherboard and ask for a technician or someone from the company who can assess your hardware.
A different type of runtime error is caused by harmful programs such as viruses and other malicious processes. These harmful programs are capable of altering the computer's settings. With this, they are very much capable of generating runtime errors. In order to prevent runtime errors that are caused by such malicious programs, you need to frequently update your antivirus software. If your PC does not have a good software security program, you need to install one and scan your computer for possible threats to the stability of your system and the security of your private data.
What all that means is: There is something in the Adobe Reader that is not functioning properly once it is opened.
The best way to resolve this is to:
1. Uninstall Reader (using the Control Panel).
2. Download and install the Windows Installer Cleanup Utility (msicuu2.exe)
3. Run the Windows Installer Cleanup Utility to remove the installer for Reader 9 (and previous versions if they are still installed).
4. Download and install a new copy of Reader, and update it (if required) to 9.3.1.

Reg Blocked Export Documents Runtime Error

Similar Messages

Maybe you are looking for