Runtime error LOAD_PROGRAM_NOT_FOUND for ARE document.
Hi All,
when I am creating or posting ARE document thru tcode J1IA101 & J1IA301 ,I am clicking on Printing check box & when I am going to save it .It is giving me error printing parameter is not set &
after pressing enter it is giving runtime error, which is as follows:
Runtime Errors LOAD_PROGRAM_NOT_FOUND
Exception CX_SY_PROGRAM_NOT_FOUND
What happened?
There are several possibilities:
Error in the ABAP Application Program
The current ABAP program "SAPLJ1IEX" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
or
Error in the SAP kernel.
The current ABAP "SAPLJ1IEX" program had to be terminated because the
ABAP processor detected an internal system error.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_PROGRAM_NOT_FOUND', was not
caught in
procedure "J_1IEX_PRINT_ARE" "(FUNCTION)", nor was it propagated by a RAISIN
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
SUBMIT or, when defining a new transaction, a new
dialog module or a new function module.
b) Transport error
Thanks,
C Singh,
hi all,
please change the access sequence from J1ID to J1IB and include program for printing ARE-3 in program 2 of access sequence J1IB.
regards,
C Singh.
Similar Messages
-
PBA7 runtime error LOAD_PROGRAM_NOT_FOUND
i am trying transfer applicant to employee by using PBA7 but when transfer infotype 0021 family there's error load program not found and with dump :
ABAP runtime errors LOAD_PROGRAM_NOT_FOUND
Occurred on 21.04.2014 at 11:52:27
Program "MP031800 " not found.
What happened?
There are various possibilities:
program library.
The current ABAP/4 program "????????????????????????????????????????" had to be
terminated because
one of the statements could not be executed.
This is probably due to an error in the ABAP/4 program.
or
Error in the SAP Basis system
ABAP/4 processor detected an internal system error.
The current ABAP program "????????????????????????????????????????" had to be
terminated because the ABAP
processor discovered an invalid system state.
MP031800 is SAP standard program for indonesian family infotype, should i create MP031800 module pool ?
what should i do ?Dear Dio Dic
I suspect that the error might be from the Basis system as it shows in the dump too
Error in the SAP Basis system
Kindly check this Note & links: 993499
LOAD_PROGRAM_NOT_FOUND
load program not found
Hope this serves u in some sort of solution.
Cheers
Pradyp -
Runtime Error: Load_Program_not_found
Hi,
I am getting this dump when i am trying to run an interface program
Runtime Error: Load_Program_not_found
except : CX_SY_Program_not_found
How am i supposed to terminate this dump...???Hi,
Go to sm37 and check for the function module which it is saying as 'loadprogram not found'.
This error comes if the function module is not activated also.
Rgds,
Suman -
Excise Invoice List-Pending for ARE document creation
Dear All,
Is there any standard Tcode for getting the list of excise invoice which are pending for ARE documents creation or with the status of ARE documents.
Thanks & Regards,
AntimaHi,
No there is no standard report available for this requirement. You may need to develop a Z report.
J1ARE_AGE gives u the status after creation of ARE1.
Thanks
Krishna. -
Runtime error while posting a document (FB70/FBS1)
Hi
I am getting a runtime error while posting a document through FB70 or FBS1 .
The erro description tells The type "CL_BCS_OBJHEAD" is unknown.
And the program dumps in Function module SO_KPRO_DECIDE.
Has any one faced this problem?Hi,
Please check the psoting date and also the reversal date in FBS1. Please check when you have posted the document and when you want ot reverse the same.
Thank you,
Shilpa. -
Portal runtime error below Tool Area
I am getitng portal runtime error below Tool Area from past 2 days only to some users.Please help me to solve the issue
#1.50
com.portal.prt.runtime#sap.com/irj#com.sap.com.portal.prt.runtime#
[exception]
#1#java.lang.outofmemoryerror
#1#com.sapaportals.portal.prt.component.portalcomponentexception : Error in service call of portal component
component:pcd:portal_content/abcdesk/frameworkpages/frameworkpage/com.sap.portal.toolareaiview
component class : com.sap..portal.prt.component.portalcachablecomponent
User : abc
at com.sapportals.prt.core.portalrequestmanager.handleportalcomponentexception(portalrequestmanager.java(973)
at com.sapportals.prt.core.portalrequestmanager.callportalcomponent(portalrequestmanager.java:343)
at com.sapportals.prt.core.portalrequestmanager.dispatchrequest(portalrequestmanager.java:136)
at com.sapportals.prt.core.asynch.asynchincluderunnable{1{DoDispatchrequest.Run:AsynchIncludeRunnable.java :375
at java.security.accesscontroller.doprevaliged { Native Method }
at com.sapportals.prt.core.asynch.asynchincluderunnable.rnu(AsynchIncludeRunnable.java:388)
at com.sapportals.prt.core.asynch.Threadcontextrunnable.run(Threadcontextrunnable.java:164)
at EDU.swego.cs.d1.util.concurrent.pooledexecutor$worker.run(pooledexecutor.java:729)
at java.lang.thread.run(Thread.java:534)
caused by java.lang.outofmemoryerror
Please find the Log File -
Runtime error - question for experts
hello experts,
I was trying to debug a program for unicode compatibility, and when I finally thought I had finished it.
This runtime error shows up
"Error analysis |
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
not caught in
procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
There was an attempt to read program "ZPM04_UPDATE_INFOREC_FROM_PO" from the
database.
The READ REPORT statement allows you to copy a program text into an
internal table. The occupied line length in the program text must not
exceed the width of the internal table.
The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
characters wide. The program line is
| 78 characters wide."
because the error occured in standard SAP programs, I am at loss..
Please give your suggestions.
Goldie.You need to Change the setting in the program ZPM04_UPDATE_INFOREC_FROM_PO, not in the program SAPLSBKH.
SAPLSBKH read the Report ZPM04_UPDATE_INFOREC_FROM_PO and it gets error because some lines in the ZPM04_UPDATE_INFOREC_FROM_PO are longer than 72 characters.
As suggested by other SDN members you have to follow this steps:
Go to SE38.
Enter ZPM04_UPDATE_INFOREC_FROM_PO and change.
Utilities > Setting
In the Editor Tab, set the checkbox "Downword Compatilbe line Length (72)". You can find out this checkbox in the last section of the Editor tab.
Press Enter.
In the Pop-Up, Say "YES" for the line breaks.
Regards,
Naimesh Patel -
Getting runtime Error 'UC_OBJECTS_NOT_CHARLIKE' for ALV grid
Hi,
When I call method SET_TABLE_FOR_FIRST_DISPLAY of ALV I get runtime error 'UC_OBJECTS_NOT_CHARLIKE'.
Actually i have set in the fieldcatalog the field 'CHK' of internal table as checkbox.
wa_fcat-fieldname = 'CHK' .
wa_fcat-coltext = 'Clear' .
wa_fcat-seltext = 'Clear' .
wa_fcat-checkbox = 'X' .
wa_fcat-edit = 'X' .
APPEND wa_fcat to p_lt_fieldcatalog .
Field CHK is of type c.
when i dont set the field as checkbox, I stop getting the error.
Please find a solution.
regards,
auroRelevant parts of code are:
Data Declaration:
types: begin of tt_revenue_det,
chk type c,
budat like zefit0006-zefibudat,
racct_txt like skat-txt50,
amount like zefit0006-zefihsl,
pbar_txt like tgsbt-gtext,
sgtxt like zefit0006-zefisgtxt,
costcentertxt like cskt-ktext,
bar_txt like skat-txt50,
doctype like zefit0006-zefiblart,
ch_flag type c,
end of tt_revenue_det,
data: gt_revenue_det type table of tt_revenue_det.
FIELD CATALOG
*& Form set_fieldcatalog_rev_det
text
-->P_LT_FIELDCATALOG text
form set_fieldcatalog_rev_det using p_lt_fieldcatalog type lvc_t_fcat.
data:wa_fcat type lvc_s_fcat.
wa_fcat-fieldname = 'P_GT_REVENUE_DET-CHK' .
wa_fcat-coltext = 'Clear' .
wa_fcat-seltext = 'Clear' .
wa_fcat-checkbox = 'X' .
wa_fcat-edit = 'X' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'BUDAT' .
wa_fcat-coltext = 'Posting Date' .
wa_fcat-seltext = 'Posting Date' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'RACCT_TXT' .
wa_fcat-coltext = 'Account Item Text' .
wa_fcat-seltext = 'Account Item Text' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'AMOUNT' .
wa_fcat-coltext = 'Amount' .
wa_fcat-seltext = 'Amount' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'PBAR_TXT' .
wa_fcat-coltext = 'Partner Business Area' .
wa_fcat-seltext = 'Partner Business Area' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'SGTXT' .
wa_fcat-coltext = 'Item Text' .
wa_fcat-seltext = 'Item Text' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'COSTCENTERTXT' .
wa_fcat-coltext = 'Cost Center' .
wa_fcat-seltext = 'Cost Center' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'BAR_TXT' .
wa_fcat-coltext = 'Business Area' .
wa_fcat-seltext = 'Business Area' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'DOCTYPE' .
wa_fcat-coltext = 'Type' .
wa_fcat-seltext = 'Type' .
APPEND wa_fcat to p_lt_fieldcatalog .
wa_fcat-fieldname = 'CH_FLAG' .
wa_fcat-coltext = 'Split' .
wa_fcat-seltext = 'Split' .
APPEND wa_fcat to p_lt_fieldcatalog .
endform. " set_fieldcatalog_rev_det
CREATE ALV
*& Form create_alv_revenue_det
text
-->P_GT_REVENUE_DET text
form create_alv_revenue_det using p_gt_revenue_det.
ALV related data declaration
DATA: lf_layout TYPE lvc_s_layo, "alv layout
lt_fieldcatalog type table of lvc_s_fcat, "field catalog internal table
wa_fieldcatalog type lvc_s_fcat. "work area for field catalog
create alv only if container is initial
IF G_CUSTOM_CONTAINER_REV_DET IS INITIAL.
lf_layout-no_toolbar = 'X'. " no toolbar
lf_layout-sel_mode = 'B'.
populate field catalog
perform set_fieldcatalog_rev_det using lt_fieldcatalog.
create instance of container class
CREATE OBJECT G_CUSTOM_CONTAINER_REV_DET
EXPORTING CONTAINER_NAME = G_CONTAINER_REV2.
create instance of alv grid class
CREATE OBJECT GR_ALVGRID_REV_DET
EXPORTING I_PARENT = G_CUSTOM_CONTAINER_REV_DET.
call method to display table in alv grid by passing layout and fieldcatalog
CALL METHOD GR_ALVGRID_REV_DET->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
is_layout = lf_layout
CHANGING
IT_OUTTAB = p_gt_revenue_det
IT_FIELDCATALOG = lt_fieldcatalog.
ENDIF.
endform. " create_alv_revenue_det -
Runtime Error in comment area??
My situation is not obvious to me but I can't figure it out.
I'm getting a runtime error in line 2 for syntax BUT in line 2 is just a comment block.
The runtime error pops up in eclipse but not in netbeans.
Any clues anyone?
[SOLVED] JavaScript was the issue.
Edited by: sarah.x on Feb 29, 2008 8:39 AMWe need system info and crash details:
Working with your Operating System’s Tools
Mylenium -
Runtime Error # DBIF_RSQL_INVALID_RSQL for large size BOMs
Hi All,
I am facing problem running a custom report for Routing summary. When Executing the report gives the above runtime error.
ShrtText: Error in RSQL module of database interface.
Error analysis :
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was neither caught nor passed along using a RAISING clause, in the procedure
"CP_SC_MTK_LOAD_COMPLEX_BY_TSK" "(FUNCTION)"
Since the caller of the procedure could not have expected this to occur, the running program was terminated.
The reason for the exception is: The SQL statement generated from the SAP Open SQL Statement violates restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
How to correct the error
The SAP Open SQL statement must be divided into several smaller units.
If the problem occurred due to the use of an excessively large in an IN itab construct, you can use the addition FOR ALL ENTRIES
instead. When you use this addition, the statement is split into smaller according to the restrictions of the database system used.
You may able to find an interim solution to the problem in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC
"SAPLCPSC" or "LCPSCU03"
"CP_SC_MTK_LOAD_COMPLEX_BY_TSK"
This report uses SAP standard Function module "CP_SC_MTK_LOAD_COMPLEX_BY_TSK" in the select statement.
When Analysed, We found that since the BOM size for routing is large(More than 2000 components), this dump is coming. for rest of the routings, the report works fine.
I could not found any SAP note relevant for this.
This is definitely related to large BOM size, if anybody of you came across such problem and how to correct it now.Hi,
We did solve this problem. This problem usually comes when there is very large records in internal table (More than 2000 Approx).
We need to split that select statement and make multiple statements so that the memory overflow doesn't happen. refer SAP note: 13607.
We modified the coding as follows by splitting the SELECT statementu2026
SELECT DISTINCT MANDT PLNTY PLNNR PLNAL MATNR WERKS VBELN POSNR
INTO CORRESPONDING FIELDS OF TABLE E_MTK_IDENT
FROM MAPL FOR ALL ENTRIES IN I_TSK_IDENT
WHERE PLNTY = I_TSK_IDENT-PLNTY AND
PLNNR = I_TSK_IDENT-PLNNR AND
PLNAL = I_TSK_IDENT-PLNAL AND
MATNR IN I_CPSC_MTK_SEL-MATNR AND
WERKS IN I_CPSC_MTK_SEL-WERKS AND
VBELN IN I_CPSC_MTK_SEL-VBELN AND
POSNR IN I_CPSC_MTK_SEL-POSNR AND
(FREE_WHERE-WHERE_TAB).
SELECT MANDT PLNTY PLNNR PLNAL MATNR WERKS VBELN POSNR
INTO CORRESPONDING FIELDS OF TABLE E_MTK_IDENT
FROM MAPL FOR ALL ENTRIES IN I_TSK_IDENT
WHERE PLNTY = I_TSK_IDENT-PLNTY AND
PLNNR = I_TSK_IDENT-PLNNR AND
PLNAL = I_TSK_IDENT-PLNAL AND
(FREE_WHERE-WHERE_TAB).
Delete E_MTK_IDENT where matnr NOT in I_CPSC_MTK_SEL-MATNR.
Delete E_MTK_IDENT where werks NOT in I_CPSC_MTK_SEL-WERKS.
Delete E_MTK_IDENT where VBELN NOT in I_CPSC_MTK_SEL-VBELN.
Delete E_MTK_IDENT where POSNR NOT in I_CPSC_MTK_SEL-POSNR.
Hope this helps you.
Regards, Madhu -
Runtime error 1114 for visual c++/ win 7 professional
After a restore in my pc, during the staring of windows I took a message 'run time error for visual C++' and just after that
'Runtime error
Program:C:\program files\iTunesHelpex.exe
R6034
An application has made an attempt to load the run time library incorrectrly.'
I tried to open the iTunes but it seemed not working.
I uninstalled and tried to reinstall iTunes.
During the installation I took a message 'service "Apple Mobile Device" failed to start. Verify tat you have sufficed privileges to start system services.'
I continued giving 'ignore' but the result was not that I wished.
I applied to Microsoft and they consulted me to apply to you.
Could you please help me to solve the problem?
Thanks in advance
vasps
([email protected])See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Ageing Analysis for ARE Documents - Clarification
HI,
1.What is the Purpose if ageing analysis for ARE ? and when it will be helpful ?
2. When i click on the Document system is showing is ARE Status numbers, each one have its own purpose can any one guide me
3. how it is helful to the Enduser ?
because i am new to CIN so please guide me
Reagrds,
AnuYou can use Tcode J_1I_ARE1_AGEING_ANALYSIS for SAP Report on Excise Bonding's Ageing analysis related to ARE1 document.
Excise Bond is a document that effectively licenses a manufacturing plant to remove goods from its premises without paying basic excise duty, on condition that the goods are then exported. These bond covers a fixed amount of excise duty. The excise duty of the goods exported under bond cannot exceed the bond value.
In the system, the term "excise bond" also covers letters of undertaking, and all of the excise bond functions apply equally to letters of undertaking, unless stated otherwise.
When you obtain a bond from the excise department, enter it in the system. The system numbers each bond automatically.
When you assign an ARE-1 to a bond, the system automatically warns you of any reservations that have already been made against the bond.
The system keeps track of the bond balance for you. When you post an ARE-1, the bond balance decreases automatically. In the case of running bonds, the balance increases again when you close the ARE-1.
Once an excise bond is no longer of any use to you, for example, if it expires or if you have exhausted a fixed bond, you can close it. This prevents any users from using it afterwards.
So, these kind of report will assist a user in day-to day ARE1 related activities.
Further, in Statement Regarding Export of Excisable Goods will show selection screen. Where you specify which parts of the statement you want to prepare as follows:
I
All stock removals without payment of duty
II
All removals from previous quarters for which you have not yet received a confirmation of receipt from the customs office
III
All stock removals that will exceed the export period by the end of the month
IV
All removals that you have reversed
V
A list of your bonds with their balances
Hope this assist you in understanding.
Thanks & Regards
JP -
Hi there,
Below are the steps that I followed to upload the business doc.
S1: Uploading the business process related document file (.DOC) to the business process step under Gen. Documentation tab.
S2: Providing the title, docuemtnatation type and released status for uploading the new document.
S3: Selecting the .DOC file to be uploaded. As soon as I try to upload the document I am getting the run time error as shown in the attachment. It is showing the short description that function Module "IW_C_PH_CLASS_VSP_GET" not found. I followed the steps to resolve this issue mentioned in the description. But still I am getting the same dump again and again. Any help will be highly apperitiated.
Thanks and Regards,
Rutvik UpadhyayHi Rutvik,
Please check and implement notes:
1823986 - SYB: Improved Data Load ("ins_by_bulk")
1605169 - SYB: SAP BW7.02 Correction Collection
Thanks
Vikram -
Runtime Errors - LOAD_PROGRAM_NOT_FOUND
Hi ,
we have scheduled delta job for the DO once in a day. After deleted this job, everyday getting dump 'LOAD_PROGRAM_NOT_FOUND' in st22 ,Short Text:
getting dump LOAD_PROGRAM_NOT_FOUND in st22.
Information on where terminated
Termination occurred in the ABAP program "RSBTCRTE" - in "START-OF-SELECTION".
The main program was "RSBTCRTE ".
In the source code you have the termination point in line 492
of the (Include) program "RSBTCRTE".
The program "RSBTCRTE" was started as a background job.
Job Name....... "Sliding Window-Date"
Job Initiator.. "PRODR4"
Job Number..... "0000542F".
What could be reason?
Regards,
Kanagaraj.Hi Kanagaraj,
Basically, when you are deleting the job, you should delete the job in tcode SM37 with the status 'Released'. The job with status Released is responsible for spawning new job based on the frequency. Unless this is deleted, new will be created based on the defined frequency.
I guess in your case, this job is not deleted in SM37 and thats the reason new job is getting creted everyday and trying to execute a report which is also deleted.
If you are using sdoe_bg_job_monitor tcode to schedule/delete a job, you should not have this issue.
Regards,
Vinodh -
PI 7.1 runtime error: 2 messages are merged into one
Hi,
We have recently upgraded to 71. We are having a crtical issue with one of the interface. below are the details:
Background:Interface is using ABAP mapping to convert an Idoc into file.
File name is fed into u2018dynamic configurationu2019 in mapping program.
File adapter uses dynamic file name and saves the file using NFS.
Interface receives idocs in batch, so several Idocs are received by XI almost at the same time.
Interface has been working without any problem in version 3.00 for last 3 years.
Problem in 71.:On occasions (random, not always), 2 idocs are merged into one file. It means, only one file is created, which includes the data from 2 idocs.
In message pipeline, same file name is shown both message (in dynamic config after mapping)
We have tried u2018use temporary filenameu2019 option on file adapter, but problem is not resolved.
Any sugegstion pelase!Hi,
In your Graphical mapping create an UDF with code Thread.sleep(1000) and map this udf to any node (may be root node).
Note: The delay is in mili sec.
This udf will delay the mapping for specific time. I am not sure if it is going to solve your problem but you can try.
Regards,
Sarvesh
Maybe you are looking for
-
Report generation while converting from 8.6 to 8.2
dear friends, i have developed the code for report generation in LabVIEW 8.6. I converted the same code from LabVIEW 8.6 to 8.2.After conversion it is giving the message like some of the VI's are not found in 8.2.All the VI's which are available in
-
Hi all, how to view the print preview of a smart form and how to debug the smart form Thank You
-
Dear all, I need a script to take cold backup of oracle database 10.2.0.3.0 .. such that if todays date is 28-oct-08.. then a folder with the name 28oct08 to be created in the backup location.then using the script user should login to the database sh
-
Hi all, We have a BI 7.0 system, and Iam able to insert a data provider (query) in my Report Designer and able to change the report as per requirement and save it too. The problem is once i have made the necessary changes, i want to view th
-
I am trying to redownload a previous purchase from audiobooks to this computer. I purchased it while on windows 7, but now have Windows 8.1. How do I do this?