Reg : Creation of domain with 8130 characters

Hi Experts,
I want to create Domain with 8130 characters...
Can anybody suggest..
Thanks & Regards,
Mahendar.

I don't think string can contain 8130 characters
mahendar, can you please tell us what option you used

Similar Messages

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
 at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
 at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
 at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
 at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
 at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
 at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
 at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
 at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
 at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
 at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:597)
 at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
 at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
 at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
 at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

LoadUserProfile() creates a profile with Chinese characters on a remote system

Hi,
I'm working on an application where LoadUserProfile() is being used to remotely load a user profile on a machine. The token being passed to LoadUserProfile() is obtained from LogonUser().
When doing this only with a Domain Admin user which is added in Active Directory, it creates a profile with Chinese characters in the C:\Users\ folder of the remote machine. Note that this happens only when logging in for the first time with
this Domain Admin account remotely on that machine.
// code:
PROFILEINFO pi;
memset((void *) &pi, 0, sizeof(PROFILEINFO));
pi.dwSize = sizeof(PROFILEINFO);
pi.dwFlags = PI_NOUI;
pi.lpUserName = (TCHAR *)strUser; //strUser is the User name, and it shows correctly here when debugging
if (LoadUserProfile(hToken, &pi))
//It is actually successful, and comes here when debugging.
Although the name shows up correctly when debugging (remotely), why is it creating a profile with Chinese characters on the remote machine?
TIA,
Jy

CreateProfile won't load the profile. You need to use LoadUserProfile to load the profile, and you need to query for a roaming profile path to put in the lpProfileInfo parameter if you want to include that as well. You need a token for a
user to call LoadUserProfile, but not a profile handle. LoadUserProfile will populate that for you before it returns if it was successful. See this excerpt from
https://msdn.microsoft.com/en-us/library/windows/desktop/bb762281%28v=vs.85%29.aspx:
Upon successful return, the hProfile member
of PROFILEINFO is
a registry key handle opened to the root of the user's hive. It has been opened with full access (KEY_ALL_ACCESS). If a service that is impersonating a user needs to read or write to the user's registry file, use this handle instead of HKEY_CURRENT_USER.
Do not close thehProfile handle.
Instead, pass it to the UnloadUserProfile function.
This function closes the handle. You should ensure that all handles to keys in the user's registry hive are closed. If you do not close all open registry handles, the user's profile fails to unload. For more information, see Registry
Key Security and Access Rights and Registry
Hives.
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

Reg: Creation of PFILE

Hi
I'm a fresh DBA.I'm new to this field and learning Things.Unknowingly i deleted the pfile and made a shutdown to my database..... When i'm trying to start the Database i'm unable to start it. is there any way to create a new pfile..........Please find me the way...
Advance Thanks
S.Ram

Hi,
What is your Oracle version ? Have you create a spfile before delete pfile ? If the response is no, you need to recreate a pfile manually.
=> It a good way to have a backup of all database files, including pfile (or spfile).
Nicolas.
Duplicate case with thread in other forum :
Re: Reg: Creation of PFILE after DB Shutdown
Message was edited by:
N. Gasparotto

Reg: Creation of PFILE after DB Shutdown

Hi
Actually i deleted the pfile accidentally and shutdown my database..... is there any way to create a new pfile..........Please find me the way...

Duplicate case with thread in other forum :
Reg: Creation of PFILE
Choose a forum and fix it.
What is your Oracle version ? Have you create a spfile before delete pfile ? If the response is no, you need to recreate a pfile manually.
=> It a good way to have a backup of all database files, including pfile (or spfile).
Nicolas.

Problems with Special Characters on Exchange Email

Hello:
People I have a issue with our Corporate Email on my Iphone. We use Exchange 2003 and we have users with special characters on his emails address.
I receive fine the email, just appear a errors on the display name. The issue is when I try to reply thie email. A error message popup said:
Invalid Address
"email with special characters" does not appear to be a valid email address. Do you want to send it anyway?
If I press Yes, Iphone try to send the message But I receive another error message:
Cannot send Mail
An error ocurred while delivering this message.
Any Help or Idea?
Here My Email Configuration
Email = Email
Server = Server IP
Domain = Work Domain Name
Username = my user id
Password = my password
Description = Work
Use SSL = ON
S/Mime = Off

When I Said "we have users with special characters on his emails address" its mean users with ñ,ó, ú, Ñ on his emails address.
When I said "just appear a errors on the display name" I mean characters like ÂÃ±¡
Thanks

BIA Index creation error due to invalid characters

Hi All,
While creating BIA index on an Infocube the index creation process fails with the following message.
Index for table '/BIC/SSPSEGTXT' is being processed
A character set conversion is not possible.
Parallel indexing process terminated (Task: '4')
Turns out this field is a text field and has characters such as * and + in the description,which is causing this problem.
How do I proceed with the index creation.
Options I have are:
a) Get rid of this field.. Impossible since there are a few queries that require this information.
b) Run the Database scan tool RSI18N_Search to eliminate foreign characters ....but this does not work for me.
Can anyone suggest some other option or a resolution to this problem. Or If anyone has prior experience of working with the program RSI18N_Search please let me know.
Regards
VK

Venkat, Andres,
You can try several things here;
1) This is pretty ugly but in case you need a quick way around. Create another cube w/o that char, load all the data to that cube from the first cube, and start sending daily deltas to both cubes. Of course put the second cube to BWA
2) Delete the master data! When you try deleting the master data (a particular record or records that you identified), mostly you will find out that it's used in a transactional data(in ODS or Cube) therefore it will not allow you to delete those records, unless you delete the records from the cubes first, then try it again. OR you might be lucky that it's not stored in anycube and it will delete it right away!
The right way is the second option, however when you delete data from cubes, ods, it will lock the cube + invalidate aggregates if you have + BWA indexes etc. You need to recreate them again. So try doing it in non-business hours or in your maintenance window.
Cheers
Tansu

Creating Weblogic domain with Admin Server and managed servers on different

I am trying to create Weblogic domain where Admin Server and managed servers on different machines. However I am unable to find any steps which would allow me to do so. The config.sh script always creates an Admin Server. Please help.

Whilst the method that Lawrence gives can result in a domain that is perfectly functional, it is a method that can result in errors as you are having to enter the same information twice. Also you will create two admin servers, as the second domain creation will have the console added to it on the renamed admin server and this will give issues.
The best method to create a domain spamming multiple physical machines, is to create the domain with all the components on the first machine. This means planning the domain and making sure all components are added once; so having the information about the domain written out is wise. Ensure that the WLS software is installed in the same path on each machine before starting.
Then copy the domain that you have created from one machine to the other, keeping the same paths. You can simply copy (I've used this method multiple times without issue) but the supported way would be to use the WLST PACK and UNPACK methods. These create and extract domains from templates. Some more information on these is given here -> http://docs.oracle.com/cd/E13179_01/common/docs100/pack/intro.html#wp1069056

Need suggestion in creation of domain

Hi,
can we use same domain for common characteristics field or separate domain? (ex: fields with domain value range - Yes or No
Which will be the better approcah?
Regards,
Sri

Hi,
You can use the same domain than creating new domain for the current requirement.
The basic purpose of domain is to define the Data Type and Size of it. Based on the domain we create Data Element, which describes the sematics of the Domain, i.e. the purpose of the Domain assigning to data element to field in table, where you can mention the 4 lables for data element, describes the usage of the data element, assigned to Domain.
So it is advisable to use the exising domain for creating Data elements than creating a new domain with the same data type and size.
Best wishes,
Sai Prasad

ISE 1.2 Authentication fails for 2nd AD domain with the forest trust relation

We are running cisco ISE 1.2, we have new AD domain with forest trust relation between both the new and the old. authentication to with the new domain fails.
Is there any requirements or configurations change needs to be done to make it success?

Use the license that is currently on your ISE. If your account has access to download the software, then you are good. The license will not change during the upgrade. If you are using ISE 1.2 Patch 8 or above, then you are using the same Base/Plus?Apex Licensing model.
If you are not yet on Patch 8, the you are using Base/Advanced and these will be converted during the upgrade.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Problem with some characters in complex objects

Hi all,
I've built a webservice which returns a complex object with several fields inside. All fields are public and accessable via getter and setter methods.
The problem is, that some of these fields contains numbers or underscores in their names.
For example:
public int field_a;
or
public String house3of4;
When I try to import these webservice as a model in a Web Dynpro project, it doesn't work until I remove these characters.
Is this a known problem or is there any solution for it?
Thanks
Thomas

NLS_LANG in registry is "ARABIC_UNITED ARAB EMIRATES.AR8MSWIN1256"
I use oracle form 10g for developer
oracle form 9i for database
when I build a form in client side and make a text with farsi characters, when I run the form,all characters shows me correct in farsi except four characters(گ چ ژ پ)

CRVS2010 Beta - Cannot export report to PDF with unicode characters

My report has some unicode data (Chinese), it can be previewed properly in the windows form report viewer. However, if I export the report document to PDF file, the unicode characters in exported file are all displayed as a square.
In the version of Crystal Report 2008 R2, it can export the Chinese characters to PDF when I select a Chinese font in report. But VS2010 beta cannot export the Chinese characters even a Chinese font is selected.

Barry, what is the specific font you are using?
The below is a reformatted response from Program Management:
Using non-Chinese font with Unicode characters (Chinese) the issue is reproducible when using Arial font in Unicode characters field. After changing the Unicode character to Simsun (A Chinese font named 宋体 in report), the problem is solved in Cortez and CR both.
Ludek

Can I run 2 different domains with same name but on 2 different machines?

I am trying to setup 2 domains with same name (sharedcds1) on 2 different machines (Machine1 and Machine2).
 When I start the weblogic managed server 1 (sharedcds1managedserver1) on Machine2, it throws an error saying it has some conflicts with the managed server 1 running on Machine1. How did the managed server of one machine know about the other server. Can I run 2 different domains with same name but on 2 different machines?
 Here is the error in the log -
 <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
 object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
 The object from 4596206652609838848S:130.170.61.153:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
 haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
 ore servers. Such objects can only be deployed from one server.>
 <Jun 14, 2005 10:53:29 AM EDT> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an
 object under the name weblogic.transaction.coordinators.sharedcds1managedserver1 in the JNDI tree.
 The object from 8842351474821025197S:130.170.61.154:[9505,9505,-1,-1,9505,-1,-1,0,0]:sharedcds1:s
 haredcds1managedserver1 is non-clusterable, and you have tried to bind more than once from two or m
 ore servers. Such objects can only be deployed from one server.>
 Thanks
 Satish

Yes you can. Make sure that domains configured to use different multicast address. WLS uses multicast for communications between nodes in domain.
 although your configuration will work, you could have troubles if you going to execute inter-domain calls between domains/servers with the same names.

I have a domain with 2 DCs (both virtual machines) in different Hyper-V Hosts. Dose this case make any influence on the time sync?

As title,
I have a domain with 2 DCs (both virtual machines) in 2 different Hyper-V Hosts, and one of the perform as a PDC Emulator.
Dose this case make any influence on the time sync?
i.e. Both of the VMs sync with Hyper-V host, instead the other host should sync with the PDC Emulator?
I run w32tm command and get the following result:
C:\Users\Administrator.DOMAIN8>w32tm /query /computer:dc8.domain8.local /source
VM IC Time Synchronization Provider
C:\Users\Administrator.DOMAIN8>w32tm /query /computer:hpvzh05.domain8.local /source
VM IC Time Synchronization Provider
HPVZH05.domain8.local works as PDC server.
How can I make DC8 sync with HPVZH05?

Awesome!
It looks like your PDC is successfully pulling time from an external source. DC8 is not longer pulling from Hyper-V so that is good.
When you set a client to pull from a source ( and in this case DC8 is pulling from NT5DS, which tells it to pull from the PDC), and it CAN'T pull from that source, it will default to Local CMOS Clock. This is likely an easy fix.
First, check connectivity:
- Method one- Download Portqry and run this command: portqry -n HPVZH05 -p both -e 123 and see if the results say listening, or
- Method two- Run this command from DC8: w32tm /stripchart /computer:HPVZH05
If you get any kind of error using method two, it's a connectivity issue. (Maybe you have a firewall that's blocking access?)
The other cause of this, and probably more likely in your case, is that your PDC isn't properly advertising as a reliable time source, so DC8 isn't 'allowed' to pull from it.
Try running this command on your PDC: w32tm /config /reliable:yes
Then go restart time on your PDC, THEN DC8 again. (net stop w32time & net start w32time)
Here's an article you can reference: http://technet.microsoft.com/en-us/library/cc794937(v=WS.10).aspx
- As always, if you find my posts to be helpful, please mark it appropriately. Thank you :)
Chris Ream

How do I create an Integration Domain with 3 servers ?

Hi,
I would like to create a WLI domain with three servers: 
Ã˜ One for the administration console; 
Ã˜ One for WLI; 
Ã˜ And the last to deploy EJB Session (which are the service called by WLI) 
To create the domain, I use the WLI 8.1 SP4 Configuration Wizard. 
After creating the domain with 3 services, I have not succeeded to start the WLI Server. 
For another test, I would like to create a WLI domain with two servers: 
Ã˜ One for the administration console and WLI; 
Ã˜ And the last to deploy EJB Session 
To create the main server, I have used the configuration wizard. For the other, I have used the console administration. With this configuration, the message brocker was not initialised. 
For the last test, I have created a domain with single server and I had no errors. 
So, my question is: What is the method to create a domain with three servers? 
Thanks for your help 
Case 1: Test to define 3 servers
<4 nov. 2005 14 h 45 CET> <Notice> <WebLogicServer> <BEA-000328> <Starting WebLogic Managed Server "etsoWLI" for domain "complexDomain">
The WebLogic Server did not start up properly.
weblogic.management.AbortDeploymentException: weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.management.BPMComponentInitializationException: Failed to initialize ProcessConfiguration module]
at weblogic.t3.srvr.StartupClassService.addDeployment(StartupClassService.java:92)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1560)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1528)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
Reason: [Deployer:149601]The deployment framework was unable to resume accepting requests.weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.management.BPMComponentInitializationException: Failed to initialize ProcessConfiguration module]
<4 nov. 2005 14 h 45 CET> <Emergency> <WebLogicServer> <BEA-000342> <Unable to initialize the server: [Deployer:149601]The deployment framework was unable to resume accepting requests.weblogic.t3.srvr.FatalStartupException: Can't start server due to startup class failure WLI Startup Class - with nested exception:
[com.bea.wli.management.BPMComponentInitializationException: Failed to initialize ProcessConfiguration module]>
 
Case 2 : Test to define 2 servers 
<4 nov. 2005 15 h 03 CET> <Error> <WLI-Core> <BEA-484037> <Process Tracking failed to initialize properly. Tracking data cannot be recorded for process typ
e "/MailProcess/processes/process02.jpd".>
<4 nov. 2005 15 h 03 CET> <Error> <WLI-Core> <BEA-481000> <The Message Broker is not initialized>
<4 nov. 2005 15 h 03 CET> <Error> <WLW> <000000> <Failed to register subscriptions for JPD /MailProcess/processes/process02.jpd
java.lang.RuntimeException: The Message Broker is not initialized
at com.bea.wli.broker.MessageBroker.getMessageBroker(MessageBroker.java:277)
at com.bea.wli.control.MBUtils.registerSubscriptionRules(MBUtils.java:99)
at com.bea.wli.bpm.runtime.JpdDispFile$3.run(JpdDispFile.java:903)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at com.bea.wli.bpm.runtime.JpdDispFile.registerSubscriptions(JpdDispFile.java:912)
at com.bea.wli.bpm.runtime.JpdDispFile.<init>(JpdDispFile.java:212)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at com.bea.wlw.runtime.core.dispatcher.DispUnit.loadDispFile(DispUnit.java:219)
at com.bea.wlw.runtime.core.dispatcher.DispUnit.<init>(DispUnit.java:153)
at com.bea.wlw.runtime.core.dispatcher.DispCache.ensureDispUnit(DispCache.java:578)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.getDispUnit(HttpServerHelper.java:501)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executeGetRequest(HttpServerHelper.java:541)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doGet(HttpServer.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
>
javax.management.InstanceNotFoundException: lastEtsoDomain:Location=etsoMain,Name=MsgBroker,Type=MsgBrokerRuntime (admin server:true)
at weblogic.management.internal.MBeanHomeImpl.getMBean_helper(MBeanHomeImpl.java:145)
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.java:130)
at weblogic.management.internal.MBeanHomeImpl.getRuntimeMBean(MBeanHomeImpl.java:557)
at weblogic.management.internal.MBeanHomeImpl.getRuntimeMBean(MBeanHomeImpl.java:549)
at weblogic.management.internal.AdminMBeanHomeImpl.getRuntimeMBean(AdminMBeanHomeImpl.java:580)
at com.bea.wli.management.MBeanHelper.getMsgBrokerRuntimeMBean(MBeanHelper.java:549)
at com.bea.wli.bpm.runtime.__broker.listSubscriptions(__broker.java:178)
at com.bea.wli.bpm.runtime.__broker._jspService(__broker.java:833)
at com.bea.wlw.runtime.core.dispatcher.ServiceView.dispatchToPage(ServiceView.java:269)
at com.bea.wlw.runtime.core.dispatcher.ServiceView.forward(ServiceView.java:438)
at com.bea.wlw.runtime.core.dispatcher.HttpServerHelper.executeGetRequest(HttpServerHelper.java:617)
at com.bea.wlw.runtime.core.dispatcher.HttpServer.doGet(HttpServer.java:81)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1006)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:419)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:315)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6718)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

To use 3 managed servers with Weblogic, I must a cluster environment.
Weblogic say: "WebLogic Integration domain that includes an administrative server and one or more managed servers must include a cluster. A WebLogic Integration domain that includes an administrative server and one or more managed servers without a cluster is an unsupported configuration."
Fred

Reg : Creation of domain with 8130 characters

Similar Messages

Maybe you are looking for