Reg. File split in XI

Hi,
How do we split a file in XI? I Know that we can split a file using BPM step Message split. But my scenario is like, I am getting a flat file from a customer and as soon as it picked up by the File adaptor, it should be split into two parts if the file size exceeds certain limit say 100MB. How do we handle such type of scenarios in XI?
Regards,
Murthy

Hi ,
Check Satish Reddy's reply in the following thread
Re: File receiver - Get file size
Regards,
Sushil.

Similar Messages

How to execute a .reg file in a task sequence using MDT 2013

Hi,
Im trying to add a couple of desktop icons to my custom images during deployment using MDT 2013. I have a .reg file with all commands inside it but I am struggling to get these to work. the .reg file is located on my deployment server and is in a shared
folder which everyone has full read\write access to, I was wondering if someone could help?
The commands inside the .reg file are:
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
Thanks

That's not a *.reg file. that's a set of commands used in a *.cmd file.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

File Split to Multiple IDocs

Hi all
I have a problem with splitting an flat file into multiple IDocs. My attempt was to do this without BPM as mentioned in some similar posts, but I am not sure about how to get the file splitted. The flat file has multiple orders with multiple line items and each order should create a single IDoc of type ORDERS.ORDERS05. I have imported the IDoc as external definition with IDOC being 0...unbounded. My input file looks as following:
ORDER1|LINE1|SOMETHING
ORDER1|LINE2|SOMETHING
ORDER1|LINE3|SOMETHING
ORDER2|LINE1|SOMETHING
ORDER2|LINE2|SOMETHING
I have been getting this into the appropriate PI XML structure like:
MT_Order
...OrderRecordSet (0...unbounded)
......OrderRecord (1...1)
How do I get this into multiple IDocs for each ORDERx with its n LINE items? I was thinking of SplitByValue with value change on PO, but this doesn't seem to work.
Any feedback appreciated. Thanks,
Daniel

Dear Daniel,
You can achieve the required by using MultiMapping without BPM. Pls refer to the following blog for the same,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Apart from the above, if allowd you can changed the IDOC occurrence and change the XSD of the IDOC and you can achieve the requirement with the simple message mapping.
Thanks
Prasanna

XML File splitting in PI

Hi all,
We have a requirement that the receiving application can accept files only of size 2MB. So this is a limitation from the receiving application
The source system is SAP ECC system and the receiving application is a legacy application.
Technically it is a ABAP Proxy to File scenario. Receiving application can accept files only in XML format.
SAP ABAP Proxy code is written in such a way to read all the records in a SAP table and the full table load is sent as an proxy xml message to PI, PI has to split this full xml file in to chunks based on some condition and then transfer it to receiving legacy application.
Can we achieve file splitting in PI for XML files based on no.of records or size.
Please share your inputs/pointers to provide the best solution to this requirement.
regards,
Younus

Hi,
Yes this can be done by the amount of records you send through at a time.
So lets there is 10000 records. You might only send 200 at a time and that will keep it under the 2mb limitation.
This is a simple if function on your nodes. Please see the links below that would help you.
Split source message into multiple target messages
Defining Message Splits - SAP NetWeaver Process Integration - SAP Library
Configuring Mapping-Based Message Splits - Integration Directory - SAP Library
Split mapping created no messages SAP PI 7.11
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b?overridelayout=t…
Regards,
Jannus Botha

Idoc to File Split Scenario..

HI Experts,
My scenario is Idoc to File split scenario..
Idoc will be triggered from the SAP ECC system and at the target side we need to drop two text files at the ftp directory.
so Idoc data needs to be splitted and to be dropped in two differient files in the target FTP directory..
So can any one suggest how to go ahead with the scenario..
Thanks,
--Kishore.

Hi,
In the idoc, some of the data will go to onefile and some goes to other files..
the structures of the two files are differient..
There is no condinal spliting here every idoc contents should be mapped according to the requirement and dropped as two files.. at the target end.
for ex:
Idoc
field1
fileld2
field3
field4
in the out put side
file1 should contain
field1
field3
field4
file2 should contain
field1
field2
fileld3
This is what the requirement, if you are not getting reply back with your queries..
Thanks,
--Kishore..

File-splitting based on content.

Hi Experts,
This question is regarding file-splitting.
Its a BAI2 file with multiple records in it.
a)I need to split the file based on an identifier and make those many sub-files ( with header and trailer added to the file )
b)And can we ensure we have the same name for the files? ( with a count suffixed in the end )
The forum talks about BPM, Enhanced Interface/Receiver Determination, Message Mapping split etc..
Which would be the best approach for this?
Please advise.
Thank you,
Rakesh.

Hi,
Using Enhanced Interface/Receiver Determination approach is best one.
1.If your version is 7.1 and above, you can also try using enhanced interface determination. Please go through the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90dcc6f4-0829-2d10-b0b2-c892473f1571?QuickLink=index&overridelayout=true
2.In the Receiver Determination, you need to select " Extended" in the Type of Receeiver determination.
Illustration of Enhanced Receiver Determination - SP16
regards,
ganesh.

Reading in .reg Files

When I read in .reg files, for some strange reason (well I think its strange) when I use:
BufferedReader in = ...;
String line = in.readLine();
System.out.println(line)
It prints out:
��W then a bunch of crazy boxes, (with letters in between)
This is "strange" because eariler in my program, i read another .reg file with no problem. I think the issue has to do with the fact that the .reg file I am reading from above (that outputs funny output) was written in my program. However, if I open this .reg file in like notepad, it looks perfectly normal. Any suggestions?
Thanks

Ok after reading around the net a little, apparently regedit exports in 16-bit Unicode.
So lets say in my code i do this:
Process m = Runtime.getRuntime().exec("regedit.exe /e \"" + location + "data\\" + version + "\\" + version + "BACKUP.reg\" HKEY_LOCAL_MACHINE\\SOFTWARE\\DELMIA"); //exports a Reg file, it works
m.waitFor();
lets call the exported reg file "file.reg" for simplicity.
Then I do:
BufferedReader in = new BufferedReader(new FileReader(file.reg));
String line = in.readLine();
System.out.println(line);
this prints out the crazy stuff... how am I suppose to make Buffered Reader read it in correctly? please help, im going crazy!

EXPORT FILE을 SPLIT하여 받는 방법

제품 : ORACLE SERVER
작성날짜 : 2002-04-19
EXPORT FILE을 SPLIT하여 받는 방법
=================================
PURPOSE
이 자료는 export시 2GB이상의 export dump file을 만들지 못하는 제약사항에 대하여 여러 export file로 나누어 받는 방법을 설명한다.
Explanation
!!! IMPORTANT: 이 방법은 반드시 KORN SHELL (KSH) 에서 작업해야 한다. !!!
만일 ksh을 쓰지 않을 경우는 unix prompt에서 ksh라고 치면 변경이 된다.
unix pipe와 split command를 사용하여 disk에 1024m(약1GB)씩 export file이 생기면서 export된다.
export나 import시 제공되는 모든 parameter의 추가적인 사용이 가능하다.
Export command:
echo|exp file=>(split -b 1024m - expdmp-) userid=scott/tiger tables=X
사용예> echo|exp file=>(split -b 1024m - expdmp-) userid=scott/tiger log=scott.log
위와 같이 split하여 export를 받을 경우 file name은 expdmp-aa, expdmp-ab...expdmp-az, expdmp-ba... 으로 생성된다.
Import command:
echo|imp file=<(cat expdmp-*) userid=scott/tiger tables=X
사용예>echo|imp file=<(cat expdmp-*) userid=scott/tiger ignore=y commit=y
split와 compress를 같이 사용해도 가능하다.
Export command:
echo|exp file=>(compress|split -b 1024m - expdmp-) userid=scott/tiger tables=X
Import command:
echo|imp file=<(cat expdmp-*|uncompress) userid=scott/tiger tables=X
*** 위의 작업을 solaris에서 test가 되었다. os 종류에 따라서 shell command는
달라질 수 있다.
이 외에도 split command를 사용하지 않고 unix pipe와 compress를 사용하여
3-step의 작업으로 export file size limit의 회피를 위한 방법도 가능하다.
Export command:
1) Make the pipe
mknod /tmp/exp_pipe p
2) Compress in background
compress < /tmp/exp_pipe > export.dmp.Z &
-or-
cat p | compress > output.Z &
-or-
cat p > output.file & )
3) Export to the pipe
exp file=/tmp/exp_pipe userid=scott/tiger tables=X
Import command:
1) Make the pipe
mknod /tmp/imp_pipe p
2) uncompress in background
uncompress < export.dmp.Z > /tmp/imp_pipe &
-or-
cat output_file > /tmp/imp_pipe &
3) Import thru the pipe
imp file=/tmp/imp_pipe userid=scott/tiger tables=X
Reference Ducumment
<Note:1057099.6>

File splitting and idoc serialization into XI

Dear experts,
I am brand new with XI so please be indulgent with my following question.
We have to define a new inbound interface with R/3 (4.7). We also have XI 3.0 into our landscape.
The legacy system will send us a flat file whose lines will all have the same structure. The first part of the files is aimed at creating a FI posting into R/3. The second part of the file is aimed at creating a CO posting. This CO posting has to be created after the FI posting.
I would like to know whether it is possible for XI :
1) to split the input flat file into 2 "files" (one for FI posting, the other for CO posting)
2) to create 2 idocs : one for FI posting and one for CO posting
3) to serialize those idocs into R/3
Thank you in advance for your help.
Regards,
Fabrice

Hi Fabrice,
this may help you....
File to Multiple IDocs
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
also see File splitting
Re: splitting of messages using BPM
Re: splitting of messages using BPM
regards
biplab
<b><i>**reward points if u find it is useful</i></b>

HELP Desktop reorganized, file split into 10 different pieces -- any way to revert without losing anything? Urgent!

HELP!
I was showing a friend/client how to take a screenshot of a section of the screen (cmd+shift+4), but I accidentally pressed ctrl+cmd+4 and perhaps a few others (mistake due to using non-apple keyboard with mine), which reorganized her very cluttered but very purposeful desktop!
She was rather upset. It also placed all the files that wouldn't fit in a row beneath her hard-drive icon. Understandably, this is frustrating for her; but what made it worse is that a very important document (is it PDF, .Doc? I don't know...) is, she claims, in TEN PIECES! How is this possible?
I think those are just leftover pieces and the main file is there somewhere, but I haven't heard from her -- this happened yesterday afternoon -- and I don't know if she's even used the finder to locate it (does she remember the name of the file?) -- and now she's going to visit the Apple store, and hoping they can do something for this dilemma!
They can revert to a previous state, but then she might lose recent files.
Is there any way (even intensive) to undo this re-organization of her desktop?
What is the explanation of the important file splitting into ten pieces (apparently from accidentally re-organizing her desktop or pressing a combination of cmd, shift, ctrl, alt, and 4)? Is there any simple way to undo either of these? (I'd gladly suggest a program for her to use to combine pieces of a PDF file or images into a .doc, but at this point, understandably, she is wary of my help. I still want to know what's going on, nevertheless.)
Thank You All!

No way I know of to undo an arrange. And I've never heard of files being broken into pieces, whether PDF, DOC, or other.

Merging reg files as a standard User without UAC prompt ?

I need to merge reg files as a standard user.
When I run regedit.exe as a standard user, I get an UAC prompt, thanks to the manifest file embedded in the .exe which requires privilieges elevation.
I would like to run regedit.exe as a standard user, without UAC prompt, to merge some .reg files in the HKEY_CURRENT_USER path (standard user has permissions to do so).
How could I do it ?
(I tried a dirty way to do so : I copied regedit.exe from Windows XP to an user folder on my Vista machine, and it works. It runs silently (after setting the compatibility mode to "Windows XP SP2") and merge correctely my reg file.)
Thanks in advance,
Thomas.
More info about manifest files :
http://channel9.msdn.com/Showpost.aspx?postid=209647
http://blogs.msdn.com/uac/
You can easily check this by viewing regedit.exe with notepad for example. Near the end of the exe, you will see this XML part :

<assembly xmlns="urnchemas-microsoft-com:asm.v1" manifestVersion="1.0">
<assemblyIdentity
processorArchitecture="x86"
version="1.0.0.0"
name="Microsoft.Windows.Regedit" type="win32" />
<description>Registry Editor</description>
<dependency>
    <dependentAssembly>
        <assemblyIdentity
            type="win32"
            name="Microsoft.Windows.Common-Controls"
            version="6.0.0.0"
            publicKeyToken="6595b64144ccf1df"
            processorArchitecture="x86"
        />
    </dependentAssembly>
</dependency>
<trustInfo xmlns="urnchemas-microsoft-com:asm.v3">
    <security>
        <requestedPrivileges>
            <requestedExecutionLevel
                level="highestAvailable"
                uiAccess="false"
            />
        </requestedPrivileges>
    </security>
</trustInfo>
</assembly>

And I've had another thought
Edit the registry and change
HKEY_CLASSES_ROOT\regfile\shell\open\command
to
reg import "%1"
Reg will import regfiles.
HKEY_CLASSES_ROOT is a registry key that is composed of merging the
following two keys.
HKEY_CURRENT_USER\Software\Classes
and
HKEY_LOCAL_MACHINE\SOFTWARE\Classes
with entries in HKEY_CURRENT_USER overriding entries in HKEY_LOCAL_MACHINE.
So to specifically edit for the current user only edit HKEY_CURRENT_USER and
for all users (that don't have a user entry) HKEY_LOCAL_MACHINE.
EG
HKEY_CURRENT_USER\Software\Classes\regfile\shell\open\command and
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\regfile\shell\open\command
"DavidMCandy" wrote in message news:4d9feb10-65cb-4b9b-ab3b-627692973523...
> You could edit the application manifest (they are known by the number 24)
> embedded in the application. You use ResHacker
> (http://www.angusj.com/resourcehacker/) to export the manifest, edit it,
> and
> then replace the embedded manifest with the edited one.
>
> But on Vista the manifest seemsto allow execution by nonadmins. It's
> listed
> as
> <requestedExecutionLevel
>
> level="highestAvailable"
>
> uiAccess="false"
>
> />
>
> and according to http://msdn.microsoft.com/en-us/library/bb756929.aspx it
> means
>
> highestAvailable
> The application runs with the highest privileges the current user can
> obtain.
>
> Experiment and see what happens if you change it to AsInvoker.
>
> To edit Regedit you'll need to give yourself permission to change
> c:\windows\regedit.exe
>
> Click Start - All Programs - Accessories - Right click
> Command Prompt and choose Run As Administrator. Type
>
> takeown /f c:\windows\regedit.exe /a
> icacls c:\windows\regedit.exe /grant Administrators:f
>
>
> --
> ..
> --
> "DavidMCandy" wrote in message
> news:58f05c55-c6ac-4762-aad2-011ff129ec24...
>> Convert them to a VBSscript or a batfile (it appears Reg.exe doesn't
>> honour
>> this setting).
>>
>> VBS
>>
>> Dim Sh
>> Set Sh = WScript.CreateObject("WScript.Shell")
>> Sh.RegDelete "HKCU\Software\ACME\"
>> WshShell.RegWrite "HKCU\Software\ACME\FortuneTeller\", 1, "REG_BINARY"
>>
>>
>> Batch
>>
>> Forhelp and examples type
>> reg add /?
>> --
>> ..
>> --
>> "bjohnrini" wrote in message news:cbf09759-a94f-44ee-88de-0bc762fcc5f8...
>>> Is there anyway to run regedit.exe as a standar user?
>>>
>>> I have my group policy set to Ã¢â‚¬Â¢ Automatically deny elevation
>>> requests
>>> for
>>> User Account Control: Behavior of the elevation prompt for standard
>>> users.
>>>
>>> This simply gives me "This program is blocked by group policy"
>>>
>>> On Windows 7.
>>>
>>
>>
>
>

Why can't I download .exe and .reg files?

Hi! I hope you can help me in my computer problem. I have trouble downloading .exe and .reg files. I'm not sure but it must have been for some weeks now that I had this problem. When I download these files, the Downloads Window of Firefox will appear, but will show that the download is "cancelled." I click the retry button and it starts to download, but after the download completes, the file doesn't appear on the designated Download folder. I tried searching for it in the desktop it but it still doesn't show. What can I do to fix this problem? Thanks in advance for all the help! :)

As indicated you can right click 'alarm clock 1' on http://www.pacdv.com/sounds/domestic_sounds.html to download it.
I must admit that this is silly especially if you have already gone to the full link and listened to the file. In this case it will have already been downloaded but finding it is tedious - I suspect it is only in RAM - not one of Safari's good points!
I hope this helps.

How to execute ( merge ) a .reg file?

I tried to execute the .reg file from the below program.
But there is error when i run it
     Error opening : java.io.IOException: CreateProcess: registry.reg error=0
Is there other way I can do to execute (merge) this .reg file?
Runtime r=Runtime.getRuntime();
                    Process p=null;
                    p=r.exec("registry.reg");

Try using the windows "Start" command.

TV@nywhere File Split Size limitation?

I have been recording videos and wanted to set the File Split Size to 690mb, leaving some slop room, so the mpeg files would fit on a CD. I ran several tests and found that this file split size made no difference at all. The program would split on the defaults at about 4063mb.
Any others have problems with this?

The crappy software supplied with the TV@nywhere range is very buggy and one of the bugs is the file split option. I found that no matter what size it was set to within MSIPVS it would nearly always split the file at the default split size even with an NT file system. This is probably a registry entry problem, so you may be able to by-pass the software via the registry but do not attempt it unless you are happy editing the registry.
I personally never trust any software to split my video files and perfer to capture the video as one complete file (not possible with MSIPVS unless file is smaller than the default split size because of the bug) and then split it manually at more suitable points within the video. You can use Tmpeg, VirtualDub or simular to proform the splits. By do it this way you do not get people cut off in mid sentence or find you have to change CD etc part way through an action sequence.

WEC7 - Reset application registry settings back to those in .reg files

Hi everyone
In WEC7 with Hive registry, is there a way to reset the registry settings back to how they were defined in the .reg file for my application?
I know I can do this from my C# app for each individual entry but would be nice to know if there is a single call to do this.
Regards
Terry

I am going to answer 'no", but you didn't really define the problem very well.
Your definition of the problem has something to do with "the .reg file for my application" which has no defined meaning that I am aware of. Applications don't have "the .reg file", so tell us what that is exactly.
You posted to the Platform Development forum, which might imply that you are using platform builder and building the OS. If that is the case, then "the .reg file" might be a file that you include in the OS registry when you build the
OS. If that is the case, there is a way to reset the entire registry back to factory - but it will require some work on your part.
Bruce Eitman (eMVP) Senior Engineer Bruce.Eitman AT Eurotech DOT com My BLOG http://geekswithblogs.net/bruceeitman Eurotech Inc. www.Eurotech.com

Reg. File split in XI

Similar Messages

Maybe you are looking for