Wrt54g v7 DHCP does not work on *some* winXP machines with WEP key enabled

HI,
I enabled WEP encryption in an existing network yesterday.
Out of the 10 machines on the network, all WinXP & 1 Kubuntu, 3 XP machines can not get an IP address from the DHCP server. They can happily connect with a fixed IP adresss. All machines are of different makes, 2 of them with XPSP3, different wireless hardware cards.
The firmware is 7.001, i read about 7.004 and even 7.2 on other sites than this one. (but can only find 7.2 as a download)
I am in Juba, Sudan, so cant really go to the shop and buy a new  one when I upload the wrong firmware.
Does anyone have a clue what I can do, except removing the 'security' from the router that is connected to a 500USD/Month satelite link we dont want to share with the neighbours?
Rgds,
Reinier
Message Edited by reinier on 01-14-2009 10:07 AM

Click Download and save the latest firmware available for WRT54GS ver 7.0 router...Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page...

Similar Messages

  • Group Policy not work in some client machine.

    Hello All,
    Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
    The Error:
    User policy could not be updated successfully. The following errors were encount
    ered:
    The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
    984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
    tings may not be applied until this event is resolved. This issue may be transie
    nt and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.
    b) File Replication Service Latency (a file created on another domain controller
     has not replicated to the current domain controller).
    c) The Distributed File System (DFS) client has been disabled.
    Computer policy could not be updated successfully. The following errors were enc
    ountered:
    The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
    984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
    tings may not be applied until this event is resolved. This issue may be transie
    nt and could be caused by one or more of the following:
    a) Name Resolution/Network Connectivity to the current domain controller.

    Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
    on windows 7 64 bit and few of them are windows 8. 
    Please suggest. if you need any event log for analysis i can send you.
    Thanks
    I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
    The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
    e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
    if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
    Is there VPN in use?
    If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
    Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
    Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
    If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
    e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
    984F9}\gpt.ini
    This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
    You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
    If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • In Robohelp 9, search does not work for some Vietnamese characters.

    In Robohelp 9, search does not work for some Vietnamese characters.

    I don't think there is anything we can do on a user to user forum. I suggest you report this to Adobe as a bug. Please follow this link.
    http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=38
    If you need a more immediate response, you would need to take that up with Adobe support.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    Hi guillermospain,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/PH11143
    Cheers,
    - Judy

  • Paste and match style does not work in some cases

    Dear Sir
    My "Paste and Match Style" does not work with some sites.

    What happens if you put table Table_1 into the Analytic View?
    Also go ahead and and update HANA, Rev.60 is very old by now.

  • HT1414 I have intelos and my Iphone does not work in some areas or in my house. I have had Apple replace it 2 times with the same problem. My android worked fine in all places....what's wrong with this? It's killing my business!! Any ideas to fix it??

    Please help me understand why my I phone 4s is not working in some places and my HOME!! I have been to Apple 3 times and Intelos 5 times and no one knows whats wrong and they are telling me that no one else is having this problem. It's hurting my business because I can't get calls at home. I paid a lot of money for this and may have to pay to get out of it.  I thought Apple was a good company but am changing my mind quick.

    OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
    Also I am assuming you have checked Finder - Preferences  - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

  • MenuManager in TableViewer does not work on mobile device (tablet with Win 8)

    Hi
    Welcome everybody This is my first post on this forum. I really hope you can help me out with this. It is kind of strange.... Ok, so I am developing RCP/SWT application, and it has to work on mobile device with windows 8 as well (10' tablet with windows Cool. So far so good - everything work pretty nice, except one thing that is really annoying. So I have this table, and user has possibility to use right click menu (context menu) on each row. Problem is that it does not work at all on mobile device. Right click on tablet is actually defined by pressing finger for longer period of time - then after 1 or 2 second menu should appear. Problem is that it does not at all. Funny thing is that when I connect a mouse using USB port to tablet I am able to open this menu Smile - it works completely fine. Menu works also with finger action when I press on empty (e.g. table without any data) I noticed that this issue is related with constructor style option SWT.FULL_FULL_SELECTION that is used for creating table. When I remove it from the constructor, right click works fine but there is not any data (no record is selected), so I can not perform any context menu action. Menu is dynamic, so depending on what data is loaded, the contain of menu changes. Main problem is that method menuAboutToShow is not called at all!. The code looks like that:
    Table table = new Table(parent, SWT.FULL_SELECTION | SWT.VIRTUAL | SWT.H_SCROLL | SWT.V_SCROLL | SWT.MULTI);
    table.setLinesVisible(true);
    table.setLayout(myTableLayout);
    createColumns(table, layout);
    table.setHeaderVisible(true);
    tableViewer = new TableViewer(table);
    tableViewer.setContentProvider(myContentProvider);
    tableViewer.setLabelProvider(myLabelProvider);
    MenuManager contextMenu = new MenuManager();
    contextMenu.setRemoveAllWhenShown(true);
    contextMenu.addMenuListener(new IMenuListener() {
    public void menuAboutToShow(IMenuManager mgr) {
    contextMenu.add(new MyAction(action)); // THIS PLACE IS NEVER CALLED WITH RIGHT FINGER CLICK!
    // dynamic filling context menu engine
    Menu menu = contextMenu.createContextMenu(tableViewer.getControl());
    tableViewer.getControl().setMenu(menu);
    getSite().registerContextMenu(contextMenu, null);
    Additional info: this tap-hold functionally is standard equivalent for right click on tablet device with Windows. I did not do any additional implementation for that. I think it should just work. I have several tables in my application and in all of those this problem appears. Any idea what may be wrong ?
    cheers,
    Pawel

    I have just installed SWT Example on my tablet (from here: https://www.eclipse.org/swt/examples.php#standaloneOutsideEclipse) and this same problem appears on the table example. I think it is general problem/bug. Should I report this as a swt eclipse bug ?

  • What if sync with new computer does not work. logical connection to old with WindowsXP, 32 bit version of iTunes. New is Windows7 with 64bit version

    What if sync with new computer does not work?
    logical connection to old with WindowsXP, 32 bit version of iTunes.
    New is Windows7 with 64bit version

    Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your iPod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved: http://support.apple.com/kb/HT4946
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    If your iPod can't be recognized by Windows, try these tips: iOS: Device not recognized in iTunes for Windows

  • Where do I report an application that is selling that does not work at all?  "Translator with voice" for Ipad.  I consider it shold have being filtered and not allowed to sell

    I bought an application, the Translator with voice and does not work at all. I consider that is so pooly develop that is near a fraud.  Where should I report it? Out of all imputs That I tried none was translated appropiate.

    If it's not working as described then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link.

  • DHCP does not work while connected to TC throuh ethernet

    I currently have a WRT54G router and a time Capsule. The WRT is connected to a cable modem, and the Time Capsule is connected to the router through a LAN port. The WRT assigns addresses in the range of 192.168.15.90 to .99 and the TC assigns addresses between 192.168.15.100 to .109. Connecting to the TC's wireless network works, but connecting to the TC or the router through an ethernet cable does not give an address. I have tried doing DHCP just on the router, just on the TC, and on both, and nothing seems to work, except a wireless connection. Is there a way to fix this?

    Have you set up Connection Sharing to "Bridge Mode"?

  • Registering a computer on a bank account does not work on some sites. I continually get asked to register the computer

    Logging in to several financal sites (most work ok) results in a message stating that the computer is not recognzed and asks a security question if I wish to continue and want to register this computer (as opposed using a public computer) . The next time around, after registering the computer, I get asked the same thing. Seems like the Adobe flash stuff is not sticking for some sites. Any solution ?

    Hi,
    You may have to permanently store the site cookies. You can try to check by setting the '''Firefox will:''' option in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Privacy''' to '''Remember History'''. If you are using a custom configuration, you can try to add the required sites in '''Exceptions''' on the same tab, and '''Allow''' and also make sure that if '''Settings''' below is active, deselect '''Site Preferences'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel?as=u Options > Privacy]
    If the sites are using Flash cookies, you may have to make the required changes in the Windows '''Control Panel''' > '''Flash Player'''.

  • Nokia Music does not work anymore... (laptop with ...

    Today I wanted to use Nokia Music for transferring and convert music files but I kept receive the above mentioned error.
    What can be wrong?
    It is installed on a Asus laptop with Vista 32 bit and I have the latest Nokia PC Suite running..
    Please advise,
    Black Nokia N97, productcode 0585162 FW V20.0.19 NL and 8Gb microSDHC A-data card

    Hello,
    I have the same issue with the following details:
    Probleemhandtekening:
      Gebeurtenisnaam van probleem: APPCRASH
      Naam van de toepassing: NokiaMusic.exe
      Versie van toepassing: 1.2.20226.1
      Tijdstempel van toepassing: 49a6c7aa
      Naam van foutmodule: KERNEL32.dll
      Versie van foutmodule: 6.0.6001.18215
      Tijdstempel van foutmodule: 49953395
      Uitzonderingscode: e0434f4d
      Uitzonderingsmarge: 000442eb
      Versie van besturingssysteem: 6.0.6001.2.1.0.768.3
      Landinstelling-id: 1043
      Aanvullende informatie 1: 05b4
      Aanvullende informatie 2: 4b6683e2477545eebcc32cd6e0e4bf5a
      Aanvullende informatie 3: 9f36
      Aanvullende informatie 4: 6b7c77f38f62f4e0995d32fde91fba84 
    It worked before but after I installed IE8 it no longer works. De-installing IE8 does not help.  Ik heb een Asus met Vista SP1, 32 bits. 
    Thanks 

  • MBA 11 (2013) pinch zoom does not work after some time, how to fix it ?

    Recently I purchased MBA 11 (2013) model ( 4GB ram & 1.3 Ghz dual core). Although I use iPhone 5 & iPad 4 but never used mac. So when I found the track pad is capable of pinch zoom(along with other gesture) I was excited. But later I found after opening few apps (like safari, chrome etc) pinch zoom stop working . I need to restart in order to make it work again. Other gestures works fine just issue with the pinch zoom. Along with this issue I have some other questions as well
    1) How to fix this pinch zoom issue?
    2) I use eclipse for android development, but when I connect android phone/tablet - os crashes, no idea why?
    3) How to uninstall & update apps properly which was downloaded from web (like I installed x-code) ?
    4) I want to use mouse (i am comfortable) - I need to know whether right click, wheel, ling click & drag works perfectly.
    5) How to back up the os if something goes wrong I can retrieve from there ?

    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.
    http://support.apple.com/kb/TS3694#error6

  • Data Re-Import does not work for some records stating there are duplicates

    This is CRM 2011 Rollup 6
    The same as this link.
    https://social.microsoft.com/Forums/en-US/2a792269-0094-4673-9760-5178e16299d3/cant-import-xml-for-update-operation-because-a-record-was-not-created-or-updates-because-a?forum=crm
    Thousands work, hundreds do not with the failure code "A record was not created or updated because a duplicate of the current record already exists.
    Is this a data integrity issue in CRM and the same GUID is in use?
    I do get a partially imported record for the import, but the data is not updated.

    I am trying to update my Account records by exporting them and re-importing. I have been successful with re-importing many thousands of records but there are some which are refusing to be updated. The error I get is "a record was not created or updates
    because a duplicate of the current record already exists".
    This doesn't make sense to me because I'm selecting the option to prepare the data for re-import: "Make this data available for re-importing by including required column headings."
    I can't find anything special about these records nor did I find anything special about the records that
    were successfully imported.
    Thanks.

  • "GRANT EXECUTE ANY PROCEDURE TO " does not work in some cases

    Hello,
    I some of my PL/SQL-packages I'm using DBMS-packages.
    Because I don't want to grant access for every single package, I granted EXECUTE ANY PROCEDURE to the user/schema of my packages.
    This did work in several installation.
    But for what reason ever, in one installation DBMS_RANDOM cannot be used (DBMS_RANDOM must be declared). If I explicitly grant execute on this package, it works. When I revoke it and renew the ANY PROCEDURE, it doesn't again.
    What's wrong.
    Version 11.2.0.2 on Win2008R2
    Regards,
    Mynz

    Mynz wrote:
    Hello,
    I some of my PL/SQL-packages I'm using DBMS-packages.
    Because I don't want to grant access for every single package, I granted EXECUTE ANY PROCEDURE to the user/schema of my packages.
    This did work in several installation.
    But for what reason ever, in one installation DBMS_RANDOM cannot be used (DBMS_RANDOM must be declared). If I explicitly grant execute on this package, it works. When I revoke it and renew the ANY PROCEDURE, it doesn't again.
    What's wrong.privilege acquired via ROLE do NOT apply within named PL/SQL procedures/functions

Maybe you are looking for