Reg: Finding the Payer of a perticular Customer (XD03 transaction)...
Hi friends,
Can anyone let me know, how to find the Payer of a perticular Customer (this concept comes in the transaction code XD03).
is there any TABLES or FUNCTION MODULE to find the Payer of a perticular Customer...
thanks in advance, murashali...
Hi,
Check
Transaction codes:
OABZ
AOBK
Edited by: Neenu Jose on Nov 18, 2008 7:39 AM
Similar Messages
-
Function module to find the Credit limit of a Customer based on Credit Area
hi Experts,
Is there any function module to find the Credit limit of a Customer based on Credit Area.
Regards,
Dheepakhi
try this:
select single * from KNKK INTO zzKNKK
where KUNNR = xkunnr and KKBER = xkkber.
credit limit: zzKNKK-KLIMK...
regards,darek -
How to find the moving average for perticular time step for same time series
Hello everyone,
I am new in labview and I have one issue. I have a huge text file with the different pressure value of different ports.
I make the VI in which first I read the text file and identify the perticular port column. In that column there are 32768 pressure value.
Time Num Port 101 Port 102 Port 103...... Port 532
0 1
0.001 2
50 32768
And this all reading takes in 50 sec and I have to split this readings in 4.5 sec... in every 4.5 sec there are 2969 values...
Now please go throw the attched VI... i am able to find the mean value with the 12 time step of 2969 value...
Now I want to do is, to find again the mean value of 2969 values(2970 to 5938) with time step of 12 and so on until 32768... so it happens 11 times in series...
So can anyone modify my VI??
Thank you,
Solved!
Go to Solution.
Attachments:
Moving average.vi 18 KBplease go through the attched VI
I made some correction in that.Now I am able to find the mean value for first 2969 rows with the overlapping time step of 12.
It means I am able to find the mean value from 1-12,2-13,3-14 ... 2958-2969...
but now the problem starts, I want to calculate the mean value of next 2969 rows which is 2970 to 5938 with the time step of 12...
So please modify my VI.. I stuck with the serious problem...
I have 32768 rows and have a partition of 2969 rows so the loop has to be repeat for 11 times.
hope you understand the prob
Thank you
Attachments:
Moving average.vi 19 KB -
How to find the FND_PROFILE.VALUE(ORG_ID) in custom apex schema
Hi,
How to find the FND_PROFILE.VALUE('ORG_ID') from dual in custom schema......
Actually I have integrated Apex 4.2 version with EBS r12
select FND_PROFILE.VALUE('ORG_ID') from dual ; in apps schema I m getting 198 value
but the same query(select apps.FND_PROFILE.VALUE('ORG_ID') from dual ) in custom schema (XXCVBB) returning null value..
Is there any pre steps I have to do...
kindly provide the useful inputs to retrieve the profile value..........
Regards,
PavanHi,
fnd_profile.value('ORG_ID'); will fetch you value only if there is a organization assigned to any application [or only if its a single Org], being it custom application you should have used set policy context or mo_global.init to populate the global temporary table which will hold all the Org's which that specific user has access too.
in your custom code use MO_GLOBAL.SET_POLICY_CONTEXT('S','ORG ID WHICH YOU NEED TO SET');
after setting the policy context, you should be able to see value from fnd_profile.value('ORG_ID');
Hope this Helps!!
MO_GLOBAL.SET_POLICY_CONTEXT
This procedure has two parameters
p_access_mode
Pass a value "S" in case you want your current session to work against Single ORG_ID
Pass a value of "M" in case you want your current session to work against multiple ORG_ID's
p_org_id
Only applicable if p_access_mode is passed value of "S"
MO_GLOBAL.INIT
Purpose of mo_global.init :-
It will check if new Multi Org Security Profile is set, to decide if new Security Profile method will be used.
If the new MO security profile is set, then mo_global.init inserts one record, for each Organization in Org Hierarchy, in table mo_glob_org_access_tmp
Regards,
Yuvaraj -
Can't find the Collective Search help for Customer in VD02/VD03
Hi
I ave (I hope ) an easy question for you -
I need to extent the Collective search help for Customer in VD02/VD03 with an additional elementary search help, but I can't find the name of the Collective Search Help (F1 -> Technical Information only gives Search help '=')
So, where do I find it ?
Regards
Morten NielsenOK I Found it - Called DEBI
Regards
Morten Nielsen -
Re : How to find the Account Group for a Customer
hi
i know the Sale Area ( Sales Org,Dist Channel & Division), Company code but when i go to XD01 TO create a Customer it is asking for a Account Group.My Question is how to find the Account Group
& is there any link between Sales Area and the Account Group?
RegardsHi murali,
Account group makes the fields in the customer master data as
1. suppress
2.req. entry
3. opt. entry
4.display
the above 4 are the radio buttons available.
Before u create the customer master in XD01.
you must gothrough the following paths to create xd01
Img->Fin.Accouting->AccountRec & Account Payable->Master data ->prepare for creating customer master data
In the above path
I. define account groups
In this you cretae your own account group
II. create number ranges for customer accounts
In this maintain any number range
III.Assign number ranges to customer account group
in this Assign the number range here.
Now go for XD01
select the account group you created.
Give the customer number,this number must be in the range that u made in the above II point. -
Where can I find the Payer's address in automatic payment
Hi
I am running the automatic payment program and sending the check data to legacy system through a interface. I need to send all the check details including the payers company details. In the checks printed in SAP I could only find the details of the vendor and bank but not the paying company (Name and address of paying company). Can anyone tell me which tables would contain the details and any configuration if I need to do.
Points awarded for useful answers.
Thanks in advance
RamyaFollowing are the Tables where the Data relatec to APP is stored. Most appropriate is REGUH.
REGUA Change of payment proposals: user and time
REGUH Settlement data from payment program
REGUP Processed items from payment program
REGUS Acounts blocked by payment proposal
REGUV Control records for the payment program -
How can we find the list of user exits for a transaction
hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadishhi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen -
Urgent-How to find the tables which are used in DB02 transaction
Hi,
Can anybody help me in finding the tables in Tablespaces tabstrip & Tables n Indexes tabstrip in DB02 transaction??Hi,
open the following link.
http://books.google.co.in/books?id=jTTrZjucb_QC&pg=PA37&lpg=PA37&dq=dbo2%2Bsap&source=web&ots=FgA9pC3u24&sig=sOG3EJRm5HGW2aFpkVVH_oxBjjo&hl=en#PPP1,M1
Master data load failure
Reward if Helpful
Jagadish -
How to find the JAR files of a custom portal service?
Hi all,
I have created and deployed a custom protal service on to the portal. Now for any of the other apps to make use of this service, i need the JAR files which correspond to this portal service. Where do I find them??
Regards,
Narahari
Message was edited by: Narahari VedulaHi,
Can you check up if this is located in the following path.
System Administration ->Support->Portal Runtime
Here navigate to ROOT/WEB-INF/portal/portalapps
Open the folder with the name of the par file and check up if you can locate the jar.
Regards,
Harish
(Please award points in case this helps) -
How can i find the requested portal page in custom login.jsp
We are using a customized login, logout and change password page built in JSP.
The wwsso_ls_configuration_info$ has been updated to point to the customized
JSP pages. Everything works fine so far but we would like to show different
content inside the customized login page depending on which portal page that
was requested.
eg suppose the user requested a page that belong to page group X we want to
show login page with html content relevant to page group X. If page group Y is
requested, then it show relevant information for Y.
The ssousername, password field and other parameter needed for login page will
be left to the standard names defined by oracle login requirements.
For this purpose, we need to find which portal page was requested by user in
the customized login.jsp( as users tend to bookmark the portal page eg.
http://domain/portal/page?_pageid=33,30983,33_30985&_dad=portal&_schema=PORTAL)
Once i know the requested portal page, i can parse the _pageid to get the page group.Were you ever able to get this issue resolved? I would be interested in the solution if one was ever found. Thanks.
-
How to find the Table from which a Custom table is created.
Hi Gurus,
I have a custom table in SAP and want to figure how that has been created. How can I do that?
Regards
PrashantHello Prashant,
what do you mean by "how"?
When you say custom table do you mean "Customization table" or a "Customer table" (in namespace Z... or Y...)
Anyway, you can access SE11 transaction, view the table and then check its attributes. -
Reg : Find the records in Table control
Dear all
Im having one requirement in table control . In my table control totally 100 records contains sales documents
for Example
100010
100020
100030
In that Records how to find particluar sale document in table control. How to build find option in table control.
If possible or not
Thanks & regards
SriHi Sridhar,
You need to implement amodal screen for this and a Find button above the table control.
or you can use POPUP_GET_VALUES FM
after you enter a value in the POP up screen.
" You need to put some effort to implement this, wish you to implement it successfully as this is possible
READ TABLE ITAB WITH KEY VBELN = FIND_VBELN. " FIND_VBELN is the field on your find screen.
if sy-subrc = 0.
tc-top_line = sy-tabix. " this makes the record visible in the First position
endif.
PROCESS AFTER INPUT.
LOOP AT itab.
MODULE find.
ENDLOOP.
In Program
MODULE find INPUT.
DATA : tab TYPE STANDARD TABLE OF sval WITH HEADER LINE.
REFRESH tab.
CASE ok_code.
WHEN 'FIND'.
clear ok_code.
tab-tabname = 'VBAK'.
tab-fieldname = 'VBELN'.
APPEND tab.
CALL FUNCTION 'POPUP_GET_VALUES'
EXPORTING
* NO_VALUE_CHECK = ' '
popup_title = 'Find Sales Order'
start_column = '5'
start_row = '5'
* IMPORTING
* RETURNCODE =
TABLES
fields = tab
EXCEPTIONS
error_in_fields = 1
OTHERS = 2
IF sy-subrc = 0.
READ TABLE itab WITH KEY vbeln = tab-value.
IF sy-subrc = 0.
tc-top_line = sy-tabix.
ENDIF.
ENDIF.
ENDCASE.
ENDMODULE. " find INPUT
Cheerz
Ram -
Reg: Finding the milestone table for CN02
Hi,
In CN02 transaction, if I give standard network number (PLNNR) and choose one of the activity number (VORNR) and go to milestone ( Activity menu -> Milestone Relationship ) , milestones will be listed in the table.
I would like to know from which table the milestone values are coming for the particular std network and activity number.
Regards,
Kalai<b>MLST</b> is the table of "Milestone", the link with task list is in table <b>PLZU </b>"Routing data for group"
Regards -
Reg:Finding the CostCenter with Wagetype
Hi Experts,
I've a requirement where i need to know the costcenter to which the expenses gets charged to while creating Infotypes 14 & 15.I'm using wagetype as selection screen parameter.Whenever a new record for infotypes 14 & 15 gets created,i need to populate a table with wagetype,costcenter (to which teh amount gets charged) and company code.
Thanq
Dharani YerasiIf u are working it out for a report then u can do one thing, check the start/end dates of wagetypes in IT 14 & 15 and check IT0001 or IT0027 records on the same date range, this will give you the costcenter to which that wagetype will be booked.
Maybe you are looking for
-
On Win7 computer, how can I see all files on iPod touch?
I have an iPod touch 4.3.5 (8L1), model MC540C. When it's plugged into my Windows 7 computer, I want to be able to see all the files (not just the photos). What must i do to see all the files? My ultimate purpose is to copy one file: the voice record
-
My fone cant connect to my apartment wi-fi. Everyone in my apartment has a good reception and i cant...this is getting frustrating
-
AIR 2.02 file won't reflect latest changes
Hi guys, I have an AIR 2.02 app that refuses to display the latest features my team has built, but it only happens on my MacBook. Everyone else is able to view the changes, but me. I have uninstalled it, and even deleted the .plist file associated w
-
Switching from library to streaming music?
I just finished my program and I have two versions saved. The program attaches the music file to an mc and all is hunky dory. The first file doesn't have the music files in it's library, so they obviously don't play, but everything else works and its
-
ITunes not marking podcasts as listened to
In the past, after synching, iTunes would list a podcast (that was listened to on the iPhone) as Read or listened to. This has been happening for months. It doesn't seem to do that anymore, and I constantly get the "iTunes has stopped updating... bec