How to find the FND_PROFILE.VALUE(ORG_ID) in custom apex schema

Hi,
How to find the FND_PROFILE.VALUE('ORG_ID') from dual in custom schema......
Actually I have integrated Apex 4.2 version with EBS r12
select FND_PROFILE.VALUE('ORG_ID') from dual ; in apps schema I m getting 198 value
but the same query(select apps.FND_PROFILE.VALUE('ORG_ID') from dual ) in custom schema (XXCVBB) returning null value..
Is there any pre steps I have to do...
kindly provide the useful inputs to retrieve the profile value..........
Regards,
Pavan

Hi,
fnd_profile.value('ORG_ID'); will fetch you value only if there is a organization assigned to any application [or only if its a single Org], being it custom application you should have used set policy context or mo_global.init to populate the global temporary table which will hold all the Org's which that specific user has access too.
in your custom code use MO_GLOBAL.SET_POLICY_CONTEXT('S','ORG ID WHICH YOU NEED TO SET');
after setting the policy context, you should be able to see value from fnd_profile.value('ORG_ID');
Hope this Helps!!
MO_GLOBAL.SET_POLICY_CONTEXT
This procedure has two parameters
p_access_mode
Pass a value "S" in case you want your current session to work against Single ORG_ID
Pass a value of "M" in case you want your current session to work against multiple ORG_ID's
p_org_id
Only applicable if p_access_mode is passed value of "S"
MO_GLOBAL.INIT
Purpose of mo_global.init :-
It will check if new Multi Org Security Profile is set, to decide if new Security Profile method will be used.
If the new MO security profile is set, then mo_global.init inserts one record, for each Organization in Org Hierarchy, in table mo_glob_org_access_tmp
Regards,
Yuvaraj

Similar Messages

How to find the nearlest value in 1-D array ?

Hi.. everybody..
I need to seperate the raw data(1-D) into 2 group of array by the center value and then make the average value in each array. But I also still have the problem about if the center value is not the same of some value in the 1-D array. I cannot use the split function.
"How to find the nearlest value to the center point that I calculated, in the 1-D array ?"
Thanks a lot for anybody help

In a general sense, since I'm not sure what your data values are or how far away your calculated center is from the true value, I would do it one of two ways:
1) Use a threshold value and scan the array until the threshold is reached (assumes constantly increasing values in the array).
2) Use either a) round to nearest integer b) round to + Infinity (round up) or c) round to - infinity (round down). If you don't have decimal values, you'll have to devide the values by a power of 10.
2006 Ultimate LabVIEW G-eek.

How to find the ASCII value of ' ?

how to find the ASCII value of ' using ASCII Function in SQL??
while i am trying this using syntax ASCII(''') the query is terminating at the second one

Lokanath Giri wrote:
For your validation check this link
http://www.techonthenet.com/ascii/chart.php
Please don't just refer people to other non-oracle websites when the answer is so simple to give here as others have already done.

How to find the ASCII value for an alphabet.

How to find the ASCII value for an alphabet.

How can I get Ascii value of any letter
How can I get Ascii value of any letter. Is there any function?
This is how you do it :
report demtest.
data : c.
field-symbols : <n> type x.
data : rn type i.
c = 'A'.
assign c to <n> casting.
move <n> to rn.
write rn.
This will convert 'A' to 65.
Tom Demuyt
How to convert ascii value to character.
If I give input as 65 (ascill value) I want display 'A'.
Below logic is for convert from character to ascii value , now I want to know how to convert ascii value to character.
Naveen
report demtest.
*going from A to 65
data : c value 'A'.
field-symbols : <n> type x.
data : rn type i.
assign c to <n> casting.
move <n> to rn.
write rn.
*going from 66 to B
data : i type i value 66.
data : x type x.
field-symbols : <fc> type c.
move i to x.
assign x to <fc> casting type c.
move <fc> to c.
write c.

How to find the list of existing tables in a schema using DB link?

Hi
I know how to find the list of existing tables in a schema using the following query
SQL> select * from tab;
but, how to list the tables using a DB link?
For Example
SQL> select * from tab@dblink_name;
why this doesn't work?
Pl advice me
Thanks
Reddy.

ORA-02019: connection description for remote database not foundHave you used this database link successfully for some other queries?
The error posted seems to indicate that the DB Link is not functional at all. Has it worked for any other type of DML operation or is this the first time you ever tried to use the link?

How to find the RGB Values of a Color for Hyperion

When customizing your Hyperion forms, we come across situations where we need the exact RGB value of a given color. This article explains a simple technique to find the RGB values using MS Paint and the Calculator applications that come as standard applications with your operating system.
Here are the steps to find the exact RGB value of a given color.
1) View your Hyperion form using IE, scroll down until you see the color you want to find the RGB value and press the "Print Screen" button (in your keyboard).
2) Open MS Paint and click Edit -> Paste or simply Ctrl+V. What you saw in the browser will be copied as a new untitled image.
3) Select the Color Picker tool and click on an area that has the color you want to match.
4) Now go to Edit Colors... option and click on the "Define Custom Colors >>" button. The color you picked will be selected on this palette. At the bottom right hand corner you will see the Red, Green and Blue values you need. Note down the R,G,B values (given in decimal).
5) Now we need to find out the hexa-decimal values that correspond to those decimal values. This is where we use the simple Calculator. Open the Calculator application from Program -> Accessories. Switch to the scientific mode by clicking View ->Scientific.
6) By default it will be in the decimal number mode. Enter the R value (238 in this example) and click on the Hex radio button. The corresponding hexa-decimal value (EE in this case) will be shown in the dial.
The selected color in this case has the same value for R, G and B. (In fact, all shades of gray has the same values for R, G and B.) Therefore, the RGB value of the background color that we need is #eeeeee. Repeat step 6 to find out the hex value for the Green and Blue elements, if they are different.
Tip:
If you find it difficult to pick a color, zoom the image by pressing Ctrl+PageDown or using View -> Zoom -> Custom... option.

These tips are to find the RGB color of HFM default row where row is text and text lines in data columns are also visible to business users as Yellow as an input cell. By applying the same RGB color you can apply the same color to your data cells or rows. This post shows how to identify color from any web view-able object.
Regards,
Manaf

How to find the inserted values in alv

Hello All,
How to find the inserted and deleted values in ALV.
Regards,
lisa.

Hi,
copy the output table before calling set_table_for_first_display and refresh_display
then in your event call
CLASS lcl_alv_handler_1100 DEFINITION.
PUBLIC SECTION.
    METHODS:
      handle_data_changed
         FOR EVENT data_changed OF cl_gui_alv_grid
             IMPORTING er_data_changed,
ENDCLASS.
after this here you can find modified new output table
then compare the new output table with older one
aRs

How to find the maximum value among four fields in a single record

Hi Gems...
I have a record in which there are 4 currency fields.
Now i would like to know the maximum of these 4 fields.
I tried with Max functions in which i put all the 4 values...but it is showing error like ") is missing" though it is there.
Can we insert more than 2 values in Max function?
Or else is there any other option to find the max value among the 4 values which lies in a single record
Thanks
Jiten

Hi Anil,
Say suppose i have a single record in which 4 premiums of a particular bond exists.
for eg:
Prem1 Prem2 Prem3 Prem4
129000.00 388000.00 228000.00 14800.00
Now this is a single record for a particular bond ... now i need to calculate the max value among these 4 premiums.
How would we proceed to achieve this?
Regards
Jiten
Edited by: Jitendra Yuddandi on Feb 3, 2009 1:04 PM

How to find the PREVIOUS value of a non-DB item?

I want to do a simple thing but found it impossible.
I want to find the previous value of a non-DB item in a form.
I tried creating a text item and populating it using PRE-TEXT-ITEM but that does not work.
WHEN-VALIDATE-ITEM does not work either because WVI fires only after item value has changed.
Any suggestions will be greatly appreciated.
Edited by: Channa on Apr 2, 2010 4:34 AM

Channa wrote:
I want to do a simple thing but found it impossible.
I want to find the previous value of a non-DB item in a form.
I tried creating a text item and populating it using PRE-TEXT-ITEM but that does not work.
WHEN-VALIDATE-ITEM does not work either because WVI fires only after item value has changed.
Any suggestions will be greatly appreciated.
Edited by: Channa on Apr 2, 2010 4:34 AMPlease make it clear what is your requirement then possibly we can provide you a better answer
You can use Global variables for to store old values also on Post-query populate a value in separate field or Parameter

Re : How to find the Account Group for a Customer

hi
i know the Sale Area ( Sales Org,Dist Channel & Division), Company code but when i go to XD01 TO create a Customer it is asking for a Account Group.My Question is how to find the Account Group
& is there any link between Sales Area and the Account Group?
Regards

Hi murali,
      Account group makes the fields in the customer master data as
      1. suppress
      2.req. entry
      3. opt. entry
      4.display
      the above 4 are the radio buttons available.
    Before u create the customer master in XD01.
    you must gothrough the following paths to create xd01
    Img->Fin.Accouting->AccountRec & Account Payable->Master data ->prepare for creating customer master data
                      In the above path
                           I. define account groups
                          In this you cretae your own account group
                            II. create number ranges for customer accounts
                            In this maintain any number range
                           III.Assign number ranges to customer account group
                            in this Assign the number range here.
Now go for XD01
select the account group you created.
Give the customer number,this number must be in the range that u made in the above II point.

How to find the ascii value in abap

Hi everyone,
i want to get to ascii value of a given character. so wanted to know whether is it possbile to get ascii value of a character in ABAP or not ?
if yes let us know the way to find it ...
thank you.

Hi,
Please go through this link below:
http://www.sap-img.com/abap/how-can-i-get-ascii-value-of-any-letter.htm
You can also try using FM's:
CHAR_INT_CONVERSION,
CHAR_HEX_CONVERSION
Hope it helps
Regards
Mansi

How to find the total value of the Production order

HI ,
I am developing one report in which , custumer have a req. to show the total value (in Dollar) of all open production order as well as the past production order ( not DELEvered & teco ) for the selected plant . for that i need BAPI or table name .
Regards
Satish

Hi,
For production order nos. - AUFK or AFKO
For production order status - JEST & to know the status eg REL etc, refer TJ02
For costs - COSS & COEP (Pass order nos. to the field OBJNR as OR followed by 12 digit order number)
Hope the above helps.
Regards,
Vivek

How to find the new tables and columns in a schema

hi..good morning to all...
I have a schema ABC which owns some objects.
Now some days before I have made another schema XYZ which was a replica of ABC schema.
between these days some new tables, new columns in the existing tables(with or without default value), comments on the columns are being added in the new schema i.e XYZ schema.
Now I have to find the extra things which are present in the new schema. I need to find the new tables, new columns in hte existing tables, their default values and descriptions of those.
Can u plss help me how can I find it?
I am guessing that I have to write a SQL query with a minus clause but I am not able to write it and also dont know where should I execute it.
plss help. thanks in advance.

And moreover, when I am executing the query to get the desired result, then it is throwing "illegal use of long datatype" error and pointing to the b.data_default area of my query..
select a.table_name, a.column_name, b.data_default, a.comments from all_col_comments a, dba_tab_columns b
where a.TABLE_NAME=b.TABLE_NAME
and a.OWNER=b.OWNER
and a.OWNER=XYZ
minus
select c.table_name, c.column_name, d.data_default, c.comments from all_col_comments c, dba_tab_columns d
where c.TABLE_NAME=d.TABLE_NAME
and c.OWNER=d.OWNER
and c.OWNER='ABC'
order by 1, 2;
plss help...

HTML Client: How to get the content/value of a custom control?

I made two Custom Controls named, "CustomControl_1" and "CustomControl_2".
In the render function of "CustomControl_1", how to access the value of "CustomControl_2"?
For example,
myapp.BrowseOrders.CustomControl_2_render = function (element, contentItem) {
$(element).text("Some Value");
myapp.BrowseOrders.CustomControl_1_render = function (element, contentItem) {
$(element).text( Value of CustomControl_2 ? );

I would recommend creating screen properties and binding the controls to those screen properties. Then you can easily get a reference to any value. See this article for an example of the process using custom controls:
Using The Clippy Agent in the Visual
Studio LightSwitch HTML Client
Unleash the Power - Get the LightSwitch 2013 HTML Client / SharePoint 2013 book
http://LightSwitchHelpWebsite.com

How to find the Minimum value of a Measure across a Custom Dimension

I am having Trouble figuring the best approach for the given below scenario.
I have a measure called Inventory which is basically by Product by Part by Geography across a Time period.
Part dimension is 3 levels Deep.
Part
--Configuration_NAME
- Part_ID
the Requirement is to Pick the the Minimum Inventory Values of a product across the Configuration_Name and Store this information in another measure called Inventory_Min.
here is how the data mock up looks like
config1 - product1- Inventory - 100 (Period1)
config2- product1-Inventory-200 (Period1)
config3-Product1-inventory-400 (Period1)
now the output expected is
Config1-Product1-Inventory_MIN - 100(Period1) since for this product across 3 configs, 100 is the minimum inventory.
I am trying to use @RANGE,@MINS but i am not sure how to tell essbase to go down the Part Dimensions, level 1 members and not across the Period.
any help or points will be appreciated.
Thanks,
Sriram

Hello,
what about @MINSRANGE ?
http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/minsrange.html
Inventory_MIN = @MINSRANGE(SKIPBOTH, "Inventory" , @LIST("config1","config2","config3"))
should give the result,
if you FIX @RELATIVE("Part",-1) to grab level 1 members.
and you can extend expression something like
Inventory_MIN = @MINSRANGE(SKIPBOTH, Inventory , @CHILDREN(@CURRMBR("Part")))
Hope it helps,
Ahmet

How to find the FND_PROFILE.VALUE(ORG_ID) in custom apex schema

Similar Messages

Maybe you are looking for