Reg: How to add Quotation No. in Notification Details.

Hi Experts,
I created a Quotation using BAPI, now I want to assign that Quotation to Notification No.(IW52).
That field is in Display mode, So I cant use BDC. I used "BAPI 'BAPI_ALM_NOTIF_DATA_MODIFY" & 'BAPI_ALM_NOTIF_DATA_ADD' to update the Quotation but it is not working.
Please Help me.

Hi Vijay,
Thank you for your Answer.
It is also not working. Please tell me how to pass Quotation No. or sample code.
Regards,
Bala

Similar Messages

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

Reg:HOw to add new charactersitics in standard report

hi all
HOw to add new charactersitics in standard report
regards
JK Rao

You need to copy the std report and make necessary changes in the copied report. SAP does not allow changes to std report. The technical details of the report can be seen by selecting from the menu Extras - technical information. Select the library and Report name. Copy the same using t code GRR1. Carry out necessary changes and SAVE. Before execution, you will have to specify the report group in which report needs to be attached. You can choose and existing group or specify a new one.
Regards
Rakesh Pawaskar

REG: How to add elements onto htmlb table cell.. URGENT PLZ HELP

Hi all,
I have created a htmlb table. And the jsp code is as follows
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.linde.myaccounts.util.TableBean" />
<hbj:content id="myContext">
<hbj:page title="PageTitle">
   <hbj:form id="myFormId" >
   <hbj:tableView id="myTableView1"
                      model="myBean.model"
                      design="ALTERNATING"
                      headerVisible="false"
                      footerVisible="false"
                      fillUpEmptyRows="true"
                      visibleFirstRow="1"
                      visibleRowCount="5"
</hbj:form>
</hbj:page>
</hbj:content>
                      width="500 px" >
</hbj:tableView>
I have used a table bean by which I am getting the column header names. I have 5 columns, I have to add input field in the first column, checkbox in the second column, leave the third column blank, checkbox in the fourth column and again a input field in the fifth column. I am not understanding on how to add this elements onto the table. Will I add it from the JSP using <hbj:tableViewColumns> tag or I have add them in the bean or in the dynpage. Kindly someone give me the code for this...
This is very urgent..Kindly help...
Thanks in advance,
Priyanka

Hi,
Have you tried looking at the examples that come with the PDK for all of the HTMLB elements? From memory, there should be a small table example or 2 that have different types of columns shown similar to what you want - they have the full source code with them for you to look at.
If you are working in a portal, go to the Java Developer tab and I "think" there should be a tab linking to HTMLB documentation and examples - sorry I can't be more specific but I don't have access to a portal at the moment so am trying to remember.
Gareth.

Reg:How to add availability check in sales view

hi all
How to add availability check in sales view
regards
JK

HI Janardan..
Check out the help.sap link for Availability check. It has a lot of info.
http://help.sap.com/saphelp_erp2005/helpdata/en/6b/2785347860ea35e10000009b38f83b/frameset.htm
If it helps Reward with points..
Regards Rk

Reg: How to add role to a role programitically.

Hi All,
How to add a role to another role programmatically ?
My requirement is...
I have a super role S1 which has two sub roles R1 and R2.
I have two schedulers running. When scheduler-1 runs, I want role R1 to be added to super role S1 and the role R2 to be removed. When scheduler-2 runs, I want the role R2 to be added and role R1 to be removed from role S1.
Now my question is...how to add the sub roles programmatically to super role?
Thanks,
Shilpa.

Hi Shilpa,
sounds like you want to provide users with different content at different times. Have you ever heard about PCD Filtering? PCD Filtering allows you to hide or show parts of the content using arbitrary filter expressions. I guess you could also implement a PCD filter which filters content depending on the current time.
Check the article <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3367e690-0201-0010-d285-c69bd884c9f3">Filtering Role and Workset Content</a>, Shantanu's blog <a href="https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6370">Filtering Role Content by User Attributes</a> and the presentation <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/17968de1-0a01-0010-1f9f-c090fbc7001a">FilteringRoleand WorksetContentforDevelopers</a> for more information about PCD Filters.
Best regards,
Martin

Reg:How to add fields to the scripts in detail

How to add fields to the scripts in detail.
Plz give me one example help me out.

Hi
add fields to the scripts by sending that field between two &s.
for example if u want to add lifnr of lfa1 table then pass field like this.
&wa_lfa1-lifnr&.here wa_lfa1 is work area for internal table it_lfa1.
if name1 then &wa_lfa1-name1&
in this way you can add fields to the script under any window.
i am sending one example program for scripts.
&--structure declaration--
TYPES:BEGIN OF ST_LFA1,
      LIFNR TYPE LFA1-LIFNR,
      NAME1 TYPE LFA1-NAME1,
      LAND1 TYPE LFA1-LAND1,
      ORT01 TYPE ORT01,
      REGIO TYPE REGIO,
      END OF ST_LFA1.
TYPES:BEGIN OF ST_EKKO,
      EBELN TYPE EKKO-EBELN,
      BUKRS TYPE EKKO-BUKRS,
      AEDAT TYPE EKKO-AEDAT,
      ERNAM TYPE EKKO-ERNAM,
      BSTYP TYPE EKKO-BSTYP,
      LIFNR TYPE EKKO-LIFNR,
      END OF ST_EKKO.
TYPES:BEGIN OF ST_EKPO,
      EBELN TYPE EKPO-EBELN,
      EBELP TYPE EKPO-EBELP,
      LOEKZ TYPE EKPO-LOEKZ,
      AEDAT TYPE EKPO-AEDAT,
      MATNR TYPE EKPO-MATNR,
      NETWR TYPE EKPO-NETWR,
      END OF ST_EKPO.
&--internal table,work area declaration--
DATA:WA_LFA1 TYPE ST_LFA1,
     IT_LFA1 TYPE STANDARD TABLE OF ST_LFA1,
     WA_EKKO TYPE ST_EKKO,
     IT_EKKO TYPE STANDARD TABLE OF ST_EKKO,
     WA_EKPO TYPE ST_EKPO,
     IT_EKPO TYPE STANDARD TABLE OF ST_EKPO.
&--data declaration--
DATA:TOTAL TYPE EKPO-NETWR,
      V_EBELN TYPE EKKO-EBELN.
data: v_item(20) type c.
&--parameter for purchase document number--
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS P_PURDOC LIKE V_EBELN.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA_FROM_EKKO.
PERFORM GET_DATA_FROM_LFA1.
PERFORM GET_DATA_FROM_EKPO.
&--grand total--
LOOP AT IT_EKPO INTO WA_EKPO.
    TOTAL = TOTAL + WA_EKPO-NETWR.
    CLEAR WA_EKPO.
ENDLOOP.
&--open form--
CALL FUNCTION 'OPEN_FORM'
   EXPORTING
    DEVICE                            = 'PRINTER'
    FORM                              = 'Z_50886_VENDOR'
    LANGUAGE                          = SY-LANGU
   EXCEPTIONS
     CANCELED                          = 1
     DEVICE                            = 2
     FORM                              = 3
     OPTIONS                           = 4
     UNCLOSED                          = 5
     MAIL_OPTIONS                      = 6
     ARCHIVE_ERROR                     = 7
     INVALID_FAX_NUMBER                = 8
     MORE_PARAMS_NEEDED_IN_BATCH       = 9
     SPOOL_ERROR                       = 10
     CODEPAGE                          = 11
     OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for header details--
READ TABLE IT_EKKO INTO WA_EKKO INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'HEAD'
     WINDOW                         = 'HEADER'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for item details--
LOOP AT IT_EKPO INTO WA_EKPO.
concatenate wa_ekko-ebeln wa_ekpo-ebelp into v_item.
    CALL FUNCTION 'WRITE_FORM'
     EXPORTING
       ELEMENT                        = 'ITEM'
       WINDOW                         = 'MAIN'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDLOOP.
&--write form for vendor details--
READ TABLE IT_LFA1 INTO WA_LFA1 INDEX 1.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'VENDOR'
     WINDOW                         = 'ADDRESS'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--write form for grand total--
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    WINDOW                         = 'TOTAL'
EXCEPTIONS
   ELEMENT                        = 1
   FUNCTION                       = 2
   TYPE                           = 3
   UNOPENED                       = 4
   UNSTARTED                      = 5
   WINDOW                         = 6
   BAD_PAGEFORMAT_FOR_PRINT       = 7
   SPOOL_ERROR                    = 8
   CODEPAGE                       = 9
   OTHERS                         = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
&--close form--
CALL FUNCTION 'CLOSE_FORM'
   EXCEPTIONS
     UNOPENED                       = 1
     BAD_PAGEFORMAT_FOR_PRINT       = 2
     SEND_ERROR                     = 3
     SPOOL_ERROR                    = 4
     CODEPAGE                       = 5
     OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form get_data_from_ekko
FORM GET_DATA_FROM_EKKO .
SELECT EBELN
         BUKRS
         AEDAT
         ERNAM
         BSTYP
         LIFNR
      FROM EKKO INTO TABLE IT_EKKO WHERE EBELN = P_PURDOC.
ENDFORM.                    " get_data_from_ekko
*&      Form get_data_from_lfa1
FORM GET_DATA_FROM_LFA1 .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT LIFNR
           NAME1
           LAND1
           ORT01
           REGIO
           FROM LFA1 INTO TABLE IT_LFA1 FOR ALL ENTRIES IN IT_EKKO WHERE
                LIFNR = IT_EKKO-LIFNR.
ENDIF.
ENDFORM.                    " get_data_from_lfa1
*&      Form get_data_from_ekpo
FORM GET_DATA_FROM_EKPO .
IF NOT IT_EKKO[] IS INITIAL.
    SELECT EBELN
           EBELP
           LOEKZ
           AEDAT
           MATNR
           NETWR
           FROM EKPO INTO TABLE IT_EKPO
           WHERE EBELN = P_PURDOC.
ENDIF.
ENDFORM.                    " get_data_from_ekpo

How do add a custom item to details pane on windows7?

Hello:
I had written a shell extension on win7, i want to add some items in the "details
pane". But I don't know how to do this .
Thanks.

Hi holmals,
This forum is to discuss problems of C# development. Your question is not related to the topic of this forum.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to add a task to notification

Hi all,
Can anyone please tell me with the parameters to be passed to add a task to a PM notification
Thanks in advance,
bharathi.

hi,
pass code group and task processor.

Reg: How to add new tab strip in MIGO transaction

Hi Experts,
I need to add a new tab strip(Inside one selection screen, If the user clicks the new tab strip, New selection screen should populate) in MIGO transaction after pressing enter for the movement type '122'.
I tried with the BADI MB_MIGO_BADI, Simply i called the module pool program inside that BADI, But it is not giving any solution.
Please guide me to find the solution for this requirement.
Regards
Vijay.R

Hi,
You may also try the exits available with the MIGO transaction. To find exits you can use the fillowing code by giving tranasaction code as input.
REPORT zrmexitfinder                               .
TABLES: modsap, modact, tstc.
PARAMETERS: input1 LIKE tstc-tcode DEFAULT ' ',
            input2 LIKE modsap-typ DEFAULT ' '.
DATA: search1(6),
      search2(3),
      search3 LIKE modsap-member.
DATA : first_row VALUE 'Y'.
CONCATENATE: '%' input1 '%' INTO search1,
'%' input2 INTO search2.
SELECT * FROM tstc WHERE tcode LIKE search1.
first_row = 'Y'.
CHECK tstc-pgmna NE space.
CONCATENATE '%' tstc-pgmna '%' INTO search3.
SELECT * FROM modsap WHERE typ LIKE search2
AND member LIKE search3.
    SELECT SINGLE * FROM modact WHERE member = modsap-name.
    IF first_row EQ 'Y'.
      WRITE: /0 tstc-tcode, 6 tstc-pgmna, 16 modsap-name, 32 modsap-typ,
             45 modsap-member, 70 modact-name.
      first_row = 'N'.
    ELSE.
      WRITE: /16 modsap-name, 32 modsap-typ, 45 modsap-member, 70 modact-name.
    ENDIF.
    CLEAR : modsap, modact.
ENDSELECT.
IF sy-subrc NE 0.
    WRITE : /0 tstc-tcode, 6 tstc-pgmna, 30 'No exits found'.
ENDIF.
CLEAR tstc.
ENDSELECT.
END-OF-SELECTION.
CLEAR: search1, search2, search3.
Regards,
Renjith Michael.

HOW TO ADD SNABASE TO SHOW NOTIFICATION AREA ICONS

HELLO
I HAVE a CLIENT COMPUTER WINDOWS 7 with his 2010
I SET UP THE SNABASE SETTING
THE SERVICES IS RUNNING
BUT IN THE OLD VERSION I SEE THE ICON OF SNABASE IN THE TRAY NEAR THE CLOCK
now IN WINDOWS 7 I DO NOT SEE THE ICON IN THE notification area

The icon only shows up in the notification tray when SnaBase is configured to run as an application. The default setting for a HIS client is for SnaBase to run as a Windows service. If you go back to the HIS Configuration Tool and change SnaBase to run as
an application, you will get the icon. Once you are in the Configuration Tool, go to common settings and then click the Advanced button. In the Advanced settings, you see the option to run as an application.
Thanks...
Stephen Jackson - MSFT

How to add a Tab in Company Detail System Form

Hi Experts
I am making a new Tab in Company Detail System form In Accounting Tab after Excise tab. This is tree of Tabs. Accounting Tab has two Sub-Tabs General and Excise. Now this New Tab 'Export' will also be the sub-Tab of Accounting Tab. My code for inserting tab is given below
If pVal.FormType = "136" Then
                    Dim sysItem As Item
                    Dim SysEdit As Item
                    Dim lbl As StaticText
                    Dim editText As EditText
                    Dim oFolder As Folder
                    sysItem = form.Items.Item("140002039")
                    oItem = form.Items.Add("ExportFD", BoFormItemTypes.it_FOLDER)
                    oItem.Left = sysItem.Left + sysItem.Width
                    oItem.Top = sysItem.Top
                    oItem.Width = sysItem.Width + 20
                    oItem.FromPane = 5
                    oItem.ToPane = 6
                    oFolder = oItem.Specific
                    oFolder.Caption = "Import/Export"
                    oFolder.GroupWith("140002039")
                    sysItem = form.Items.Item("140002040")
                    SysEdit = form.Items.Item("140002041")
                    oItem = form.Items.Add("LDrMfNo", BoFormItemTypes.it_STATIC)
                    oItem.Left = sysItem.Left
                    oItem.Top = sysItem.Top + 65
                    oItem.Width = 120
                    oItem.FromPane = 6
                    oItem.ToPane = 6
                    lbl = oItem.Specific
                    lbl.Caption = "Drug Manufacture Licence No."
                    oItem = form.Items.Add("EDrMfNo", BoFormItemTypes.it_EDIT)
                    oItem.Left = SysEdit.Left
                    oItem.Top = sysItem.Top + 65
                    oItem.Width = SysEdit.Width
                    oItem.FromPane = 6
                    oItem.ToPane = 6
                    editText = oItem.Specific
                    editText.DataBind.SetBound(True, "OADM", "U_DrMfcLNo")
The tab is added properly It also show labels and Edit boxes but when I select this tab General and Excise tab is disappeared.
Plz suggest me what can be the problem
Thanks
Best Regards
Jitender
Edited by: Jitender Garhwal on Apr 5, 2010 6:28 AM

Hello,
Change the ToPane Property of General and Excise until your last panelevel (6?)
The ToPane property of these items is less than your folders panelevel ! This is the problem.
Regards,
J

How to add revision table in content details(headline view)

Hi,
Need to add revision details table for content details in headline view. Revision details is already available in classic view.
please some one help me in this regard.
Thanks

Hi Priyansh,
You can create a custom template (content server - My search result templates , choose head line search result template) and modify headline view search result template as you want.
Hope it helps

How to add revenue to the account detail page

steps for adding revenue details page ie in order to display forecasting revenue report for account productwise is it possible to add additional section in the record detail page
mail id : [email protected]
wat are steps for adding finance tab ?????????

Thank you.
However it is not showing in the catalog.
I used the WSRP producer connection name as provider and id from the portlet.xml file.
rss is my WSRP producer connection name from EM and the id is numeric in my portlet.xml file.
I can see the folder but I cannot see anything inside of the folder.
<folder id="customPortletFolder">
<attributes>
<attribute value="Custom Portlet Folder" attributeId="Title" isKey="true"/>
<attribute value="Custom Portlet Folder" attributeId="Description" isKey="true"/>
<attribute value="Custom Portlet Folder" attributeId="Subject" isKey="true"/>
<attribute value="/adf/webcenter/folderlists_qualifier.png" attributeId="IconURI"/>
</attributes>
<contents>
<resource path="1269551712363"
repository="rss"
id="RSSReader">
<attributes>
<attribute value="portletTest" attributeId="Title" isKey="true"/>
<attribute value="portletTest" attributeId="Description" isKey="true"/>
<attribute value="portletTest" attributeId="Subject" isKey="true"/>
<attribute value="oracle.webcenter.spaces.browser" attributeId="WEBCENTER_SERVICE_ID" isKey="false"/>
<attribute value="/adf/webcenter/community_qualifier.png" attributeId="IconURI"/>
</attributes>
</resource>
</contents>
</folder>

How to add links in the detailed navigation area of the navigation panel

hi everyone,
I had developed 4 iviews. 2 of those iviews i added to 2 different pages. And the 2 pages added to workse and assigned a role. i assigned this role to user. and it is working fine.
i want to add remaining to iviews as links.
how to add the links in the detailed navigation area of the navigation panel.
regards
sunil kumar.ch

Hi sunil,
Create a JSPDynPage component(C) having 2 hbj:link whose hrefs point to these 2 iViews(A and B). U can get the href of the iView by previewing it(for A and B). Create an iview from the par component (C) and add it to the DLN so that it shows the links to ur iViews(A and B). U can make the Show Tray property of this iView (C) to false.
Regards,
Harini S

Reg: How to add Quotation No. in Notification Details.

Similar Messages

Maybe you are looking for