Reg SFTP

Hi All,
I am having a new development where i need to take the iDOC XML file ( using file port) from the SAP system and i need to send the XML IDOC to receiver by using SFTP . Here when i am configuring the receiver adapter there is no SFTP adapter( only file adapter is available) . What are the steps we need to do for getting that SFTP in to our adaper engine.
Regards,
Rama

>
Ramakrishna Balusu wrote:
> Hi All,
> I am having a new development where i need to take the iDOC XML file ( using file port) from the SAP system and i need to send the XML IDOC to receiver by using SFTP . Here when i am configuring the receiver adapter there is no SFTP adapter( only file adapter is available) . What are the steps we need to do for getting that SFTP in to our adaper engine.
>
>
>
>
> Regards,
> Rama
1. Are you using any third party SFTP adapter? - if yes, then as mentioned by other you need to setup the adapter metadata. It would be a good idea to go thru the adapter installation guide of that vendor.
2. If you are not using a 3rd party adapter but want to use the standard file adapter for the same, then note that there is no standard way to achieve this but there are workaround and the easiest one probably is this - /people/daniel.graversen/blog/2008/12/11/sftp-with-pi-the-openssh-way

Similar Messages

REG: SFTP to SFTP scenario

Hi All,
         I have a SFTP to SFTP scenario where file is getting picked up from the source location and failing at the taget side.
       When tested with File to SFTP the same channel is able tp place file sucessfully.
       However when scenario becomes SFTP to SFTP the receiver SFTP channel fails to place the file.
          I am using see burger adapter to connect to sftp server.
Please help me on this.
Thanks,
Siva

Hi,
       I dont have certificate issuse with the target system because when i do a File to SFTP scenario with same channel the channel is owrking fine.
       But when i make it SFTP to SFTP scenario the receiver channel is failling.
     I have maintained all the certificates in the trusted keystore.
Thanks,
Siva

Reg SFTP Communication channel

Hello Fellow Consultants,
I have a situation here where in a folder there are 2 different file names Eg: v110-prod- chennai1PS & v110-prod-chennai9PS, now i want to know if can pick these 2 files with One SFTP sender communication channel.
I know this can be done with FTP with masking and stuff but i want to know if there is anyother way to do with Single sender SFTP Cc else i have to configure with Two Sftp channels
Regards
Vijay

Hi,
From single file adapter(1 communication channel) you can read multiple files.
Just use special charater in the file name scheme and activate the adapter specific parameters
Note: The internal structure of the files should be same
Regards,
Shradha

Reg : SFTP Issue - ODI

Hi All ,
Can anyone help on this
When i am trying to SFTP my file to third party , it throwing me error
My details are :
OdiSftpPut "-HOST=*****" "-USER=****" "-PASSWORD=*****" "-LOCAL_DIR=/home/oracle/Target_Files" "-LOCAL_FILE=SFTPTest.csv" "-REMOTE_DIR=/home" "-REMOTE_FILE=SFTPTest.csv" "-IDENTITY_FILE=/home/oracle/***.ppk" "-STRICT_HOSTKEY_CHECKING=NO"
Here i have password for IDENTITY_FILE (.ppk file ) but i dont find any option to give the password in ODI .
The error msg is : invalid privatekey
but we checked with different tool like Filezilla for this process with this key , it worked fine .
Regards,
Karthik

You can provide the password to identity file using -PASSWORD parameter.
Here is the description for -PASSWORD from documentation http://docs.oracle.com/cd/E23943_01/integrate.1111/e12643/appendix_a.htm#CEGICIJE
-PASSWORD=<password of the SSH user> No The password of the SSH user or the passphrase of the password protected identity file. If the –IDENTITY_FILE argument is provided this value will be used as the passphrase for the password protected private key file. If the public key authentication fails then it falls back to the

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

Using secure FTP (SFTP) with XI 3.0.

Hi,
I must bring a document with SFTP protocol.
Is it possible use SFTP with XI 3.0. What must I do use SFTP with XI. Is it necessary to install some component to XI or it needs some 3hrd party components?
Thanks

Hi Cemil,
Right now, XI does not have the feature of communicating with SFTP. You can extend the functionality of the File Adapter by writing some adapter modules to enable it to communicate with SFTP.
Regards,
Hari.

Java SFTP API/Sample application

I'm looking for either sample java code of how to send files via sftp or a java api to do this. Jscape looks to be the standard for doing this although it costs quite a bit, wondering if there is free code out there?
Thanks for any help in advance!!!

Check out JCraft's Java Secure Channel (JSch) project -- it's an implementation of SSH (with scp, sftp, etc.) in Java -- with some examples that might get you started: http://www.jcraft.com/jsch/
The code is distributed free under a BSD-style license which is described on the site.
Greg

Cannot login via ssh/sftp from certain clients

Hi Guys,
Strange issue here. I have a machine running 10.7.4 that I want to be able to access via sftp/ssh.
I can login into the machine in terminal using either ssh or sftp.
I cannot however login to the machine from finder via sftp. I am just told the username/password is wrong.
Equally I cannot login to the machine from certain clients on my android phone (the main reason I need sftp)
I can however login from cyberduck on the other machines I have, and from some clients on my android phone.
When a mac is denied access it gives authentication failed as the reason, when a android client is denied access it gives network communtaction issues as its reason for failing, not authentication.
From memory these issues started when smb broke for me in 10.7.3.
Can any one shed any light on this?
Cheers

bump

Trigger File Option in SFTP Advantco Sender Adapter

Hi ,
What is the purpose of Trigger file option in sender SFTP adapter?When i enabled Advance selection for source file we have this functionality.Can i use this option to delete the multiple files in the same directory instead of using File Name Mask.
We have scenario to delete 4 files from application server in that only one file should be sent to partner and the rest should be delete from application server.
Actual solution is to use to use script to delete the rest of the files do we have any other alternative.
Thanks

Hi,
Another alternativet is to write your own customer adapter module and using java programming you can delete remaining 3 files. This is bit complex comapre to script writing but one advantage is with adapter module is that, you can provide the deteted file names with time stamp in the audit log of XI message, which will help in troublshooting if some issue happens.
Regards,
RK

Sftp batch job with password?

Hi folks.
We're trying to develop scripts to automate the transfer of files from various Windows machines to a Linux server. Because the job involves moving multiple files to multiple directories, I wanted to use sftp's -B batchfile option to transfer the files instead of having to reauthenticate every time we transfer files to a different location. However, the man page says:
Batch mode. Reads commands from a file instead of standard input. Since this mode is intended for scripts, SFTP2 will not try to interact with the user, which means that only passwordless authentication methods will work.
I would love to use keys to get this done but unfortunately, the type of authentication on the server is out of our control and not likely to change (it's straight password). So, is there any way I can do this in batch mode with password authentication? I thought about using scp but, as far as I can tell, it doesn't have great support for delivering multiple local files (in different locations) to multiple remote locations. One would have to re-authenticate for every scp command, right?
Any help would be appreciated. Thanks.

Thanks for the recommendation, Endperform, but after reading up on expect and autoexpect, I realized I'd rather not have usernames and passwords hard coded into the script.
After much research, I think I've found a solution. It's a little odd but the Maverick Ant library does exactly what I need it to do. It can actually read an ssh profile, perform multiple transfers without having to re-authenticate and execute multiple remote commands without having to reauthenticate. The native Ant libraries can't do this. There is no sftp Ant task and the scp and sshexec tasks are lacking to say the least.
If anyone else runs into a similar situation, I highly recommend the Maverick tool.

Reg: Message and BPM

Hi
I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
Pls let me know the corrective step.
reg: Prabhu

Hi,
1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
Hope this helps,
Regards,
Moorthy

How to open a non-default port for sftp?

My MacMini at work used to listen on port 12345 for sFTP for close to 9 months but then something (probably a power cut...) messed all things Remote up with the office setup. So I tried to reset things. It didn't work. What do you think I'm doing wrong? The MacMini is running Tiger (10.4.10). Here's what I've done so far:
1. Drilled a hole for port 12345 on my Thomson (Alcatel SpeedTouch 780) modem/router, and disabled its Firewall and Parental Controls;
2. In System Prefs>Sharing>Firewall I have enabled the Firewall after making sure I've added a service for port 12345;
3. Also in System Prefs I've enabled Remote Login, to make sure the sftp daemon is running;
4. Back on the Thomson modem/router, I've set up a service to forward port 12345 of the router to port 12345 of my MacMini (I selected it by clicking on its MAC address in the appropriate drop down menu in the modem/router config page).
STILL: when I try to sftp to my MacMini from outside the office, I get a timeout error. Back at the MacMini, I run Network Utility and ask it to check at IP (the MacMini IP) for ports 12345 to 12345, and it doesn't report it as 'open' (it does for port 22).
I am bummed. What am I missing? I am also 100 miles away from the office on any given day, so it's not exactly easy to pop over and try various troubleshooting things. I have to kill this once and for all next I'm at the office, some time in the weekend!
As always, thanks, people.
< Edited by Host >

It sounds to me like the port forwarding is setup, so that's not the issue.
The issue is how to change sshd to listen on port 12345 rather than port 22. However, I'm not sure that you need to.
If you're trying to hide your server from the public, why not just setup your port forwarding to forward publicIP:12345 to privateIP:22.
That way you connect to port 12345 from your remote location, but don't have to change the server configuration at all.
The only reason why this wouldn't work would be if your router doesn't support different internal and external ports (e.g. it always maps to the same internal port number).
If that's the case then you need to change launchd to listen on port 12345. How you do that depends on whether you want to move the entire SSH service to port 12345, or whether you want SSH to support 22 and 12345 at the same time.
If the former, just edit /System/Library/LaunchDaemons/ssh.plist and change the lines:
<key>SockServiceName</key>
<string>ssh</string>
to:
<key>SockServiceName</key>
<string>italk</string>
(italk is the registered service for port 12345).
Then either reboot or unload/reload the ssh.plist to make the change active.
If you want ssh to run on both port 22 and 12345 then you should copy /System/Library/LaunchDaemons/ssh.plist to /Library/LaunchDaemons/ssh-12345.plist then make three changes to the new .plist file:
First, change the <Label> parameter to something unique (i.e. not 'com.openssh.sshd').
Second, remove the <Bonjour> array
Third, edit the SockServiceName as indicated above.
Once you've done that, reboot and you should be set.

Sftp is taking much time to execute

Hi,
I am working on SFTP .
SFTP is working but while executing, sftp is taking 8min to execute.
Do i need to set properties regarding time ?
Regards,
Divya.

Hi,
Use smaller polling interval for high throughput scenarios where the message size is not very large
Regards
Abhi

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
   FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
          b) Input msage:; FILE RES
2} JDBC2FILE RECV
        a) Output mesage;; JDBC REQ
        b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

File not found error in SFTP channel

Hi All,
We are getting a "file not found error " while using a SFTP sender channel .
Our Scenario :
We are using SFTP as the source adapter .Presently we are using two nodes for load balancing for all the sender channels.
One of the node's of the SFTP channel is picking the file , while the other node at the same time is throwing a "File not found error".
The file is being picked and is placed at the target, but the channels are in error state as one of the nodes is in error state.
Please let me know, if we did any mistake while configuring the adapter.
Thanks,
Yamunan

Hi,
Could you please check if you have provided right path in your sender communication channel...to pick the file from...
Regards,
Naveen.

Reg SFTP

Similar Messages

Maybe you are looking for