Reg:Shortdump in Program while updating Table AUSP

Hi All,
i have a problem in the program while updating the AUSP table am using the function module
CLVF_VB_INSERT_CLASSIFICATION
in that function module the short dump occurs while try to insert ausp in the following line,
insert auspc_v1 client specified from table auspcv1.
the problem is while updating transaction CL20N the update has been failed thats why i have tried to manually insert in AUSP even though its short dumping.
i have maintained all the necessary settings in cl24n.
could you please resolve my issue.

I am not sure of the Tables and there uses but it looks like you need to update SAP tables through standard transaction which is failing.
Are there any data inconsistancies for the data that you are trying to maintain?
Also maintaining the SAP table manually is not advisable as ther could be some other dependant/related tables which also might require updation.
By the way what is the Message diplyed in ABAP dump it will definately help in solving the problem.
Regards
Shital

Similar Messages

Error while updating table in database.

Hi,
While updating a table I came across following error-
ORA-01552: cannot use system rollback segment for non-system tablespace 'USERS'
I have following undo parameters set in my parameter file-
undo_management=auto
undo_tablespace=UNDOTBS1
If I have seperate undo tablespace then why Oracle is trying to use System undo segments?
Thanks,

Let's assume your settings are correct. However the error means you don't have an UNDO tablespace available. It could be because your tablespace doesn't exist, or you think you have started up your instance with this initialization parameter file.
You should make sure you have your undo tablespace attached to your database, and you are using your correct initialization file.
Have you edited this parameter in your pfile? Or have you configured this parameter in you spfile?
Issue a query against v$rollname, you should see something simmilar to this:
SQL> SELECT * FROM V$ROLLNAME;
USN NAME
0 SYSTEM
1 _SYSSMU1$
2 _SYSSMU2$
3 _SYSSMU3$
4 _SYSSMU4$
5 _SYSSMU5$
6 _SYSSMU6$
7 _SYSSMU7$
8 _SYSSMU8$
9 _SYSSMU9$
10 _SYSSMU10$
If you can't then definitely you are not starting up your database with undo segments.

Error while updating table

Hi,
I am using oracle 11g db.
Trying to update one of my table using following query :
UPDATE EMPLOYEE_HISTORY_ALL_T TMDC
SET LAST_UPDATE_DATE = '01-apr-1901'
WHERE EXISTS
(SELECT 1
FROM PROJECT_T TMP
WHERE TMP.PROJECT_ID = TMDC.PROJECT_ID
AND NVL(TMP.COL_CHG_DATE, TO_DATE('01-apr-1901', 'dd-mon-yyyy')) >= '01-apr-1901')
AND FIRST_PROCESS_DATE >= '01-apr-1901';
Error comes like "Table or view doesn't exist". Table is in the same schema in which I am trying this update stmt.
Also when I do Select * from this table data is coming.
In the all_objects I can see there is public synonym also with the same name. I think while updating it is refering to that synonym instead of table , so error is coming.
please tell me how can I refer to table in this case and not the synonym.

For table EMPLOYEE_HISTORY_ALL_T
OWNER     OBJECT_NAME     SUBOBJECT_NAME     OBJECT_ID     DATA_OBJECT_ID     OBJECT_TYPE     CREATED     LAST_DDL_TIME     TIMESTAMP     STATUS     TEMPORARY     GENERATED     SECONDARY     NAMESPACE     EDITION_NAME
PUBLIC     EMPLOYEE_HISTORY_ALL_T          726992          SYNONYM     11/15/2011 6:17:37 PM     11/15/2011 6:17:37 PM     2011-11-15:18:17:37     VALID     N     N     N     1
MIS     EMPLOYEE_HISTORY_ALL_T          726988     1752101     TABLE     2/23/2007 10:18:18 PM     11/15/2011 6:19:44 PM     2011-11-15:18:19:44     VALID     N     N     N     1
For table PROJECT_T
     OWNER     OBJECT_NAME     SUBOBJECT_NAME     OBJECT_ID     DATA_OBJECT_ID     OBJECT_TYPE     CREATED     LAST_DDL_TIME     TIMESTAMP     STATUS     TEMPORARY     GENERATED     SECONDARY     NAMESPACE     EDITION_NAME
     PUBLIC     PROJECT_T          35158          SYNONYM     3/1/2006 3:33:23 PM     11/14/2009 4:00:21 PM     2009-11-14:16:00:21     VALID     N     N     N     1
     BSC     PROJECT_T          35250          SYNONYM     2/25/2006 3:49:46 AM     11/15/2009 1:15:35 PM     2009-11-15:13:15:35     VALID     N     N     N     1
     CDWSTG     PROJECT_T          37350          SYNONYM     2/25/2006 5:32:32 AM     11/15/2009 11:01:34 AM     2009-11-15:11:01:34     VALID     N     N     N     1
     CDWPROD     PROJECT_T          40102          SYNONYM     2/25/2006 11:46:03 AM     1/1/2010 3:42:17 PM     2010-01-01:15:42:17     VALID     N     N     N     1
     MIS     PROJECT_T          810675     7360542     TABLE     4/2/2007 3:30:07 PM     11/11/2011 5:23:55 PM     2009-11-14:15:28:15     VALID     N     N     N     1
     DEL25PROD     PROJECT_T          645792     1237989     TABLE     1/9/2007 6:28:08 PM     9/6/2009 8:18:13 PM     2007-01-09:18:28:08     VALID     N     N     N     1
     DELSTG     PROJECT_T          1271755          SYNONYM     11/1/2007 1:54:32 PM     1/1/2010 3:42:17 PM     2010-01-01:15:42:17     VALID     N     N     N     1
I am logging through MIS schema. In this schema only I am running the update query.

ERROR WHILE UPDATING TABLE 'COBK'

DEAR ALL!
I am facing the following error while posting goods issue through VL01N and stock posting through MB1C ( m.type 521 without production order ).
Table COBK is not updated wile doing those trasactions, this cause the runtime error.how to solve this issue?
I searched SAP notes but problem not yet solved.Kindly go through the following error and give your suggestions.
Thanks in advance.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"INSERT_TABLES" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
Sivasubramaniam,
SD consultant.

I am pretty sure table COBK is a the Cost Center Accounting table.
You need to get your Finance consultant to check the periods and years are open in CCA. In fact check that they want to post to CCA.
Also check the number ranges have been set up correctly for the type of postings.
Please award points if this is useful.

Error " is not a time unit" while updating table that is Copy of CATSDB

Hi,
We have created a new table which is a copy of CATSDB and has some more Fields in it. While inserting records to the table, it is throwing the error saying " is not a time unit". Can you please provide some info on this ?
This is a complete custom Table that reuses all the Includes of CATSDB table and some more columns.
Regards,
Srikanth.

Thanks for the Inputs. The issue was I do not have access to update these tables. Now I got it. Thank you.
Regards,
Chiranjeevi.

Unique Key Violation error while updating table

Hi All,
I am having problem with UNIQUE CONSTRAINT. I am trying to update a table and getting the violation error. Here is the over view. We have a table called ActivityAttendee. ActivityAttendee has the following columns. The problem to debug is this table has
over 23 million records. How can I catch where my query is going wrong?
ActivityAttendeeID INT PRIMARY KEY IDENTITY(1,1)
,ActivityID INT NOT NULL (Foreign key to parent table Activity)
,AtendeeTypeCodeID INT NOT NULL
,ObjectID INT NOT NULL
,EmailAddress VARCHAR(255) NULL
UNIQUE KEY is on ActivityID,AtendeeTypeCodeID,ObjectID,EmailAddress
We have a requirement where we need to update the ObjectID. There is a new mapping where I dump that into a temp table #tempActivityMapping (intObjectID INT NOT NULL, intNewObjectID INT NULL)
The problem is ActivityAttendee table might already have the new ObjectID and the unique combination.
For example: ActivityAttendee Table have the following rows
1,1,1,1,NULL
2,1,1,2,NULL
3,1,1,4,'abc'
AND the temp table has 2,1
So essentially when I update in this scenario, It should ignore the second row because, if I try updating that there will be a violation of key as the first record has the exact value. When I ran my query on test data it worked fine. But for 23 million records,
its going wrong some where and I am unable to debug that. Here is my query
UPDATE AA
SET AA.ObjectID = TMP.NewObjectID
FROM dbo.ActivityAttendee AA
INNER JOIN #tmpActivityMapping TMP ON AA.ObjectID = TMP.ObjectID
WHERE TMP.NewObjectID IS NOT NULL
AND NOT EXISTS(SELECT 1
FROM dbo.ActivityAttendee AA1
WHERE AA1.ActivityID = AA.ActivityID
AND AA1.AttendeeTypeCodeID = AA.AttendeeTypeCodeID
AND AA1.ObjectID = TMP.NewObjectID
AND ISNULL(AA1.EmailAddress,'') = ISNULL(AA.EmailAddress,'')

>> I am having problem with UNIQUE CONSTRAINT. I am trying to update a table and getting the violation error. Here is the over view. We have a table called Activity_Attendee. <<
Your problem is schema design. Singular table names tell us there is only one of them the set. Activities are one kind of entity; Attendees are a totally different kind of entity; Attendees are a totally different kind of entity. Where are those tables? Then
they can have a relationship which will be a third table with REFERENCES to the other two.
Your table is total garbage. Think about how absurd “attendee_type_code_id” is. You have never read a single thing about data modeling. An attribute can be “attendee_type”, “attendee_code” or “attendee_id”but not that horrible mess. I have used something like
this in one of my busk to demonstrate the wrong way to do RDBMS as a joke, but you did it for real. The postfix is called an attribute property in ISO-11179 standards.
You also do not know that RDBMS is not OO. We have keys and not OIDs; but bad programmers use the IDENTITY table property (NOT a column!), By definition, it cannot be a key; let me say that again, by definition.
>> ActivityAttendee has the following columns. The problem to debug is this table has over 23 million records [sic: rows are not records]<<
Where did you get “UNIQUE KEY” as syntax in SQL?? What math are you doing the attendee_id? That is the only reason to make it INTEGER. I will guess that you meant attendee_type and have not taken the time to create an abbreviation encoding it.
The term “patent/child” table is wrong! That was network databases, not RDBMS. We have referenced and referencing table. Totally different concept!
CREATE TABLE Attendees
(attendee_id CHAR(10) NOT NULL PRIMARY KEY,
attendee_type INTEGER NOT NULL --- bad design.
CHECK (attendee_type BETWEEN ?? AND ??),
email_address VARCHAR(255),
CREATE TABLE Activities
(activity_id CHAR(10) NOT NULL PRIMARY KEY,
Now the relationship table. I have to make a guess about the cardinally be 1:1, 1:m or n:m.
CREATE TABLE Attendance_Roster
(attendee_id CHAR(10) NOT NULL --- UNIQUE??
REFERENCES Attendees (attendee_id),
activity_id Activities CHAR(10) NOT NULL ---UNIQUE??
REFERENCES Activities (activity_id)
PRIMARY KEY (attendee_id, activity_id), --- wild guess!
>> UNIQUE KEY is on activity_id, attendee_type_code_id_value_category, object_id, email_address <<
Aside from the incorrect “UNIQUE KEY” syntax, think about having things like an email_address in a key. This is what we SQL people call a non-key attribute.
>> We have a requirement where we need to update the ObjectID. There is a new mapping where I dump that into a temp table #tempActivityMapping (intObjectID INTEGER NOT NULL, intNewObjectID INTEGER NULL) <<
Mapping?? We do not have that concept in RDBMS. Also putting meta data prefixes like “int_” is called a “tibble” and we SQL people laugh (or cry) when we see it.
Then you have old proprietary Sybase UODATE .. FROM .. syntax. Google it; it is flawed and will fail.
Please stop programming until you have a basic understanding of RDBMS versus OO and traditional file systems. Look at my credits; when I tell you, I think I have some authority.
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Is there a process/program to update tables/data after System Refresh?

We are planning a refresh of SAP R/3 47 and SRM EBP 4.0. Copies of all data from our production system will be refreshed onto our test environment.
Is there a program that can be run to reset the "Destination" targets as there is with "source" using BDLS?
We can copy out certain tables and reimport, but we fear that we may be missing something. If anyone has informatoin on the process for performing a refresh, we would appreciate hearing about it.
Thanks,
BIll
Message was edited by: William Olliver
Using BDLS and clearing out some of the custom tables (allowing normal programs to rebuild data points) did the trick.

Hi Bill,
BDLS takes care of the table entries that correspond to the Logical System. This takes care of almost 80-90% of the entries.
Keep in mind however, you will need to change all the entries that correspond to an backend RFC destination or other webservers once a copy is made; as those are not updated by BDLS.
Some of these are (as it is entirely dependent on the scenarios being implemented):
DEFINE BACKEND SYSTEMS:
--IMG>SRM>...
ORGANIZATION STRUCTURE
--Use standard program RHOMATTRIBUTES_REPLACE
--Plus, Change other attributes: POrg,PGrp,Plants...
EDI/IDOC/ALE entries for partner profiles
--WE21 etc.
TWPURLSVR, TWPURLPATH, etc
--Table entries
WORKFLOW Verification Steps
--IMG>Workflow...
MIDDLEWARE PARAMETERS in R/3 and SRM.
--Table Entries
CATALOG ENTRIES
--IMG>Master Data...
Hope this helps.
-Sachin Sethi

Error while updating table before branching to a report

Hi,
I have an apex form screen where on click of a button, i need to change a few flags on the screen and then display a bi publisher report.
when the user clicks the PRINT Button a javascript function is called, which will set the flags and submits the form. I have the default process row of table process to update the form fields.
in the branch i gave the BI publisher report url.
everything works fine so far.
if i click the print button again for a second time, i get a checksum ... error as shown below.
ORA-20001: Error in DML: p_rowid=982-000790, p_alt_rowid=_ID_NUMBER, p_rowid2=, p_alt_rowid2=. ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "BD63FDD3142B79017CCD2C8DA8ED8CA7" application checksum = "B2FD7581A9478214E59264F9C1CFAF96"
Error Unable to process row of table .
OK
Any idea how to fix this?
What i am trying to do is:
when the print button is clicked then i need to set the Print flag in the screen and database to true.I am using the default row update process generated by apex for a table form.
Thanks
Knut

Hi Scott,
example 1
I have a demo at the following url
http://apex.oracle.com/pls/otn/f?p=30091:6:1206476651563662::NO:::
1. page 6 is the report and page 7 will be the details form.
2. select a record from the report click edit and it will take you to the details screen page 7.
3. on page 7 i have 2 select boxes with YES/NO flag. Initially set them to NO.
save changes.
4. click on the print button. it will reset the select lists to YES and opens a report.
5.now go and edit anything on the screen and click apply changes.
we will get the an error.
All i am trying to do is update the flags to YES before displaying the report which works fine. but if i try to edit any data and save it throws an error.
is my table.
CREATE TABLE "DEMO_MINISTER"
(     "MINISTER_ID" VARCHAR2(12),
     "NAME" VARCHAR2(50),
     "CERT_FLAG" VARCHAR2(1),
     "LABEL_FLAG" VARCHAR2(1)
MINISTER_ID" is the primary key generated using a sequence. (i have to actually generate it with - year prefix etc hence a varchar)
example 2:
http://apex.oracle.com/pls/otn/f?p=30091:1:607292687304632:::::
i have another page page 1 with demo_customers list. here the id is a number here. on edit it displays page 5 where i tried the same print reset flag stuff here and it works.
Table Data Indexes Model Constraints Grants Statistics UI Defaults Triggers Dependencies SQL
CREATE TABLE "DEMO_CUSTOMERS"
(     "CUSTOMER_ID" NUMBER NOT NULL ENABLE,
     "CUST_FIRST_NAME" VARCHAR2(20) NOT NULL ENABLE,
     "CUST_LAST_NAME" VARCHAR2(20) NOT NULL ENABLE,
     "CUST_STREET_ADDRESS1" VARCHAR2(60),
     "CUST_STREET_ADDRESS2" VARCHAR2(60),
     "CUST_CITY" VARCHAR2(30),
     "CUST_STATE" VARCHAR2(2),
     "CUST_POSTAL_CODE" VARCHAR2(10),
     "PHONE_NUMBER1" VARCHAR2(25),
     "PHONE_NUMBER2" VARCHAR2(25),
     "CREDIT_LIMIT" NUMBER(9,2),
     "CUST_EMAIL" VARCHAR2(30),
     "PRINT_FLAG" VARCHAR2(1),
     "PRINT_LABEL_FLAG" VARCHAR2(1),
     CONSTRAINT "DEMO_CUST_CREDIT_LIMIT_MAX" CHECK (credit_limit <= 5000) ENABLE,
     CONSTRAINT "DEMO_CUSTOMERS_PK" PRIMARY KEY ("CUSTOMER_ID") ENABLE
So what should i do to get the example 1 to work.
Thanks
knut

Mutating Trigger error while updating table

Hi Guys,
I am updating one table and after trigger also fire at the same time. Now, I want to avoid mutating trigger error. Can any one help me on this.
Thanks in advance!
Regards,
-LRK

You'll have to read these articles first, they explain what's the problem and how to deal with it:
http://www.oracle-base.com/articles/9i/MutatingTableExceptions.php
http://asktom.oracle.com/pls/asktom/ASKTOM.download_file?p_file=6551198119097816936
but, as Saubhik already said, using Oracle's AUDIT functionality would be the way to go.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_4007.htm
Using an autonomous transaction can result in corrupted data or unexpected errors, stay away from them if you want to use them in order to bypass/hide your mutating table error.

Getting index error while updating table

Hi All,
I am getting error
SQL> UPDATE bqcustomer
2 SET
3 namelegal = 'SME ' || SubStr(bqcustomer.namelegal,8),
4 nameshort = 'SME ' || SubStr(bqcustomer.nameshort,8),
5 nametrading='SME ' || SubStr(bqcustomer.nametrading,8)
6 WHERE
7 hassmeaccount = 1
8 AND nametrading LIKE 'GLOBAL %' ;
UPDATE bqcustomer
ERROR at line 1:
ORA-08102: index key not found, obj# 60473, dba 46348301 (2)
any help on this will be appreciated .
Thanks in advance
Sachin Srivastava

ORA-08102 INDEX KEY NO FOUND, OBJ# 25095, DBA 33567643 (2)

"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB" while updating the custom table

hi friends...
i am posting fico document using bapi BAPI_ACC_GL_POSTING_POST.
after that i am updating the document number to my custom table.
but in some cases while updating the document in my custom table i am getting the fallowing dump..
in ST22
How to correct the error:
Database error text........: "[1205] Transaction (Process ID 66) was deadlocked
on lock resources with another process and has been chosen as the deadlock
victim. Rerun the transaction."
Internal call code.........: "[RSQL/UPDT/ZIF004_PKT ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"ZFI_01_MONTHLY_RESULT_FRM_PKT" or "ZFI_01_MONTHLY_RESULT_FRM_PKT"
"UPLOAD_SAP"
Source Code Extract
LOOP AT i_zif004_pkt_sum .
UPDATE zif004_pkt SET xblnr = i_zif004_pkt_sum-xblnr ---> i am getting DUMP here
                          gjahr = i_zif004_pkt_sum-gjahr
                          sap_flag_posting = i_zif004_pkt_sum-sap_flag_posting
                      WHERE compcode = i_zif004_pkt_sum-compcode
                     AND ccode = i_zif004_pkt_sum-ccode
                      AND wbselement = i_zif004_pkt_sum-wbselement
                      AND kostl = i_zif004_pkt_sum-kostl
                      AND code = i_zif004_pkt_sum-code
                      AND month1 = l_ltx
                      AND year1 = p_year.
    IF sy-subrc = 0.
      WRITE :/ 'Document ', i_zif004_pkt_sum-xblnr, 'is posted for ', i_zif004_pkt_sum-code.
    ENDIF.
ENDLOOP.
kindly give some inputs..
regards
Selva

Hi,
You will face this issue if your oracle data base is lack of work processes. try to check the work processes and increase them if possible with the helps basis guys.
check the below thread.
DI job failed ORA-12537: TNS:connection closed.
Regards,
Venkatesh

Validity Table not updating for 0IC_C03 while updating data

Hi,
1.Validity table not updating for 0IC_C03 while updating data in my BW 7.4 With HANA data base?
Key fields : 0Plant
0Calday
if you run this programe after loading data - RSDG_CUBE_VALT_MODIFY it is updating.
2. I am not getting no marker update option in non-cumulative Info cube 0ic_c03 manage tab or in DTP tabs check as per 7.4 modifications?
and 2LIS_03_BX in DTP I am getting below this option only
Can you please give me solution for this issues.
Regards
Umashankar

Hi Uma,
Please go through the below link which might be helpful.
Not able to Edit Validity Table : RSDV
Marker Update Option is available under Collapse tab of Info cube.
Thanks,
Karan

Lock row in 1 table while update other tables

Gurus,
I want to read 1 table. If the date is less than today, I want to update 4 other tables. I only want to do this update once a day.
While the 4 other tables are being updated, I want the other web users to pause for the update while this procedure runs.
Is there a better way to do this?
TIA
Steve42
Here is what I have:
CREATE OR REPLACE PROCEDURE TEST_TODAY2 AS
-- to create the table
-- create table test_today(updated_date date);
-- insert into test_today(updated_date) values (sysdate-1);
-- select * from test_today;
    cursor daily_update_cur is
    select updated_date from test_today
      for update of updated_date;
   last_updated_date date;
BEGIN
NULL;
    open daily_update_cur;
    fetch daily_update_cur into last_updated_date;
    IF trunc(last_updated_date) < trunc(sysdate) THEN
       -- update 4 other tables
       -- After those are updated, update test_today
       dbms_output.put_line('After updating tables');
       update test_today set updated_date=sysdate;
    ELSE
       dbms_output.put_line('Tables already up to date');
       null;
    END IF;
    execute immediate 'commit';
    close daily_update_cur;
END TEST_TODAY2;Edited by: BluShadow on 15-Oct-2012 14:22
Please use {noformat}{noformat} tags before and after your code as described in the FAQ: {message:id=9360002}.
I've corrected it this time for you.

Steve,
I just checked your requirements and program. It seems fine.
You can modify something on this. As below part is not required as it ll never happen.. :)
    ELSE
       dbms_output.put_line('Tables already up to date');
       null;
    END IF;
/* execute immediate 'commit'; -- No need to write in dynamic sql as its not a DDL statement */
commit;Sorry for going out of topic.
Since I'm a NEWBIE, I just wanted to make sure that this would work before
we roll this out to LIVE PRODUCTION.Newbie is defined on the basis of the date you joined/registered. It never asked for your experience or a screening while signing up.
Better you can have an other idea to filter out people by their replies/sense with quality/weight of statements as newbies or experts ! .. :)
Thanks!

While updating a table i am getting ORA-00600 error.

Hi all,
While updating a table i am getting the following:
**SQL Error: ORA-00600: internal error code, arguments: [qkebCreateConstantOpn1], [], [], [], [], [], [], [], [], [], [], []**
**00600. 00000 - "internal error code, arguments: [%s], [%s], [%s], [%s], [%s], [%s], [%s], [%s]"**
I am not getting how to proceed on this. Please guide me.
Thanks,
Ritesh

While performing some unspecified action (no DML) on an unknown table (no DDL) in an unknown version and edition of the Oracle database you had an untrapped Oracle exceptions.
There are too many unknowns to help you beyond recommending you open an SR at MyOracleSupport.

Error while updating JDBD table

Hi all,
Am getting the error at the receiver JDBC CC. I have checked the conceren mapping also . i t is working under test tab.
Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'SAP_STG_AP_SAP_REF' (structure 'Statement'): com.sybase.jdbc3.jdbc.SybSQLException: Attempt to insert duplicate key row in object 'SAP_STG_AP_SAP_REF' with unique index 'SAP_STG_AP_SAP_REF_IX1'
Any sugestion?
Thanks,
kanan

ya issue is while updating the jdbc table ..duplicate entries are coming...I have check the maping xml also with the same data..I think I need to change the mapping -to remove the duplicate (entry in that field) using some function. Any idea which will be the function?? + please let me know how to find out which field is the error refering to in the jdbc table-- with unique index 'SAP_STG_AP_SAP_REF_IX1'
In my scenario Action is INSERT. At the mapping output, there are some entries (5-6 ACCESS) where all the fields under the ACCESS are similar
kanan

Reg:Shortdump in Program while updating Table AUSP

Similar Messages

Maybe you are looking for