Reg User Exit for Infotype 8

Hi,
I have created two custom fields on infotype 8, i need populate on fied with base salaryBonus(from infotyp 14) and the other field should be the total of all line items on Infotype 8 ( Base salary shift differentials(permiums).
In order to do this, i searching for user exit , can anyone help me in doing this ..please
Thanks
Kisu

Hi,
I looks into the exit.It seems it is doesnt get tigger while going through the PA40.I dont know is it possible or not but I need to do while going through the actions. when the user in pa40 goes through some actions and reaches infotype 8 and enters and the values and press enters ,at this moment I need to find the Exit that gets tiggers and calculates the values and populates the custom fields on 0008.
I would like to know is it possible to do so..?
Thanks
Kisu

Similar Messages

Need Fcode in User Exit For Infotype

Hi,
I am writing a User exit for Infotype 0002 at Customers Site. I need Fcode to realize a specific logic. I am using the exit PBAS0001 for this purpose. can anyone tell me how to I get Fcode so that I can use it in the code ?
Regards,
Suma

Hi Suma,
sorry that i posted the false BAdI.
You have to use HRPAD00INFTY. That is for PA.
The BAdI HRBAS00INFTY is for PD/OM.
Regards
Bernd
But there is no paramter ok_code
Message was edited by:
Bernd Köhn

User exit for infotype 21

i want o find out user exit for infotype 21   for the time and Absences plsea help me out

>
SANDEEP JADHAV wrote:
> Not working   man , when i used infotype 21 and using subtype     i am getting " Creating   Absences " screen
> now i am entering time and   Absences hours when i save the entries , now on that spot i want to find out user exit but i am unable to get it
>
> Please help me out
You meant infotype 2001, right? the User exit EXIT_SAPFP50M_002 works perfect or you could try the AFTER_INPUT method of the BAdI HRPAD00INFTY
~Suresh

How to find the user exit for infotype 2013 ?

Hi All,
How to find the user exit in infotype 2013? i want to change the drop down list default value in infotype 2013.
Thanks,
Srikanth P

reward points if useful
User exit name is PBAS0001.
code should be written in ZXPADU01 for PBO
ZXPADU02 for PAI.

User-Exit for Infotype 0045

Hi,
      In infotype 0045 (loans) there is a field for Intrest rate on the loan..as of now this field is a drop down...is it possible through some user-exit to change the type of the field from drop down to input field so that user can enter the intrest rate manually
      awaiting your reply and thanks in advance
regards
Sai easwar

HRPBAS01               User Exit for HR Master Data
HRPC0001               HR: PC download authorization
HRRPAI01               User exit for FB HR_ENTRY_DATE and HR_LE
PARA0001               Enhancement for Determining the Number o
PARA0002               Enhancement for Calculating Annual Salar
PBASRP01               PA: User exit distributed reporting
PBAS0001               PA: Pers.Admin./Recruitment: Default val
PBAS0001               PA: Pers.Admin./Recruitment: Default val
PBAS0002               PA: Enhancements for Personnel Administr
BADI           BADI_PERSONID_EXT                          SAPMP50A                         Dynamic call
BADI           EXIT_NAME                                  SAPLHRBAS00UTILITIES/LHRBAS00U   Dynamic call
these are the available exit here!!
gunjan

REG:USER EXIT FOR DATA SOURCE 0HR_LSO_1

Hi ,
I have to write the enhancement ABAP code for data source 0HR_LSO_1 which is related to module " training and event management "(also known as LMS or LSO) in ECC 6.0 .
So how can I find out appropriate user exit for the same .I have to concentrate on the field "kostl (cost centre)" in that data source .
Please provide some suggestions .
Thanking You ,
Tarun Brijwani .

Hi Tarun...
I this might help you.
In the HR System:
1) T-CODE: CMOD
2) Choose an existing project (vg: Z12345)
3) Modify
4) Press Components button
5) Look for the enhance: RSAP0001 (the BW extracting enhancement)
6) The you have one of the following option:
a- If the Data Source is "transaction data": The exit is "EXIT_SAPLRSAP_001"
b- If the Data Source is "master data": The exit is "EXIT_SAPLRSAP_002"
7) double-click in the appropriate one
8) You'll see an INCLUDE sentence. Could be this ZXRSAU01 or this ZXRSAU02 (depending on the previous step). Double-click and you'll be redirected to the SE38
9) some code:
CASE i_datasource
WHEN '0HR_LSO_1'.
    LOOP i_t_data INTO my_struct
       my_struct-KOSTL           "Here you'll must have your Cost Center
       ...etc...etc...etc
    ENDLOOP.
WHEN OTHERS.
ENDCASE
Hope it helps.
gdmon

Reg:User Exit For Invoice

Hi All,
I have an requirement that when during creation of invoice i have to update some data's to ztables and during deletion of invoice i have to update some data's. Is it possible?
Is there any user exit for this scenario? Kindly give your idea's how to resolve this scenario.

hi,
these r the exits updated during invoice creation.
Transaction Code - MIRO                     Enter Invoice
Enhancement/ Business Add-in            Description
Enhancement
LMR1M001                                User exits in Logistics Invoice Verification
LMR1M002                                Account grouping for GR/IR account maintenance
LMR1M003                                Number assignment in Logistics Invoice Verification
LMR1M004                                Logistics Invoice Verification: item text for follow-on docs
LMR1M005                                Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006                                Logistics Invoice Verification: Process XML Invoice
MRMH0001                                Logistics Invoice Verification: ERS procedure
MRMH0002                                Logistics Invoice Verification: EDI inbound
MRMH0003                                Logistics Invoice Verification: Revaluation/RAP
MRMN0001                                Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE                          Business Add-In: Logistics Invoice Verification

User exit for infotype 2002

Hi ,
The requirement is making the WBS Element field mandatory ONLY for infotype 2002 cost assignment pop up in pa30.Is this any user exit check.
regards,
srinivas

Hi srinivasarao,
1. Enhancement name is PBAS0001.
2. Inside this FM is
EXIT_SAPFP50M_002
(for checking while saving)
regards,
amit m.

User Exit for Infotype 008

Hi,
I want userexit or BADI for Infotype 008. my requirement is i want to throw error if the user enters basic pay more than 15000 based on payscale type.
Any one send me the solution .
Regards,
Srinath

You can also create an enhancement if there is no BADI or userexit available. Just check the implicit enhancement options of that screen.
E.g. There is one module CHECK_ANSAL which is executed if there was a change to the salary. In that module routine CHECK_ANSAL is called. In that routine right at the beginning and at the end there are two enhancement points where you could plug in whatever code you need.
To check if a form has any enhancement points go to menu option PROGRAM - ENHANCE. Then choose menu EDIT - ENHANCEMENT OPERATION - SHOW IMPLICIT ENHANCEMENT OPTIONS.
Select the main report which is MP00080 and set the cursor on the line where you can see lots of """""""""""""""""""""""""""""""""""""'
Go to menu EDIT - ENHANCEMENT OPERATION -CREATE and that will allow you to create an enhancement in the code where you can then plug in whatever code you need. This code will always be executed whenever that module is called.
Note that this is not a modification, just see it as a kind of user exit where you have access to all the variables the standard routine has access to.
Hope that helps,
Michael

User exit for Infotype 0102 - Grevience

Hi all,
I have a requirement where i have to put a check on infotype 0102 - greivence NA through user exit EXIT_SAPFP50M_002 .
The check is that if the user enters a personnel number , grievence number and a stage for which the record alreday exist in the table for the same personnel number , then system should pp up an error message.
I wrote the below code in EXIT_SAPFP50M_002 :-
data : i0102 like p0102 occurs 3 with header line,
begin of fs2,
pernr like p0102-pernr, grnum like p0102-grnum, grstg like p0102-grstg,
end of fs2.
CASE INNNN-INFTY.
WHEN '0102'.
MOVE INNNN TO I0102.
LOOP AT SCREEN.
SELECT PERNR GRNUM GRSTG FROM PA0102 INTO corresponding fields of fs2 WHERE PERNR = I0102-PERNR.
IF fs2-GRNUM = I0102-GRNUM ANd fs2-GRSTG = I0102-GRSTG.
MESSAGE 'A record already exist for selected combination of Grievence Number and Stage' type 'e'.
endif.
ENDLOOP.
ENDCASE.
Here system is throwing an error as " i0102 and innnn are not mutually convertible".
I tried to use a metod :
<b>cl_hr_pnnnn_type_cast=>prelp_to_pnnnn</b>
but still same error :
call method cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
exporting
prelp = innnn
importing
pnnnn = i0102.
MOVE INNNN TO I0102.
LOOP AT SCREEN.
SELECT PERNR GRNUM GRSTG FROM PA0102 INTO corresponding fields of fs2 WHERE PERNR = I0102-PERNR.
IF fs2-GRNUM = I0102-GRNUM ANd fs2-GRSTG = I0102-GRSTG.
MESSAGE 'A record already exist for selected combination of Grievence Number and Stage' type 'e'.
endif.
ENDLOOP.
Please suggest what to do.
Thanks and regards
Ribhu

Hello Ribhu
Perhaps the following coding may be useful:
* define local data
DATA:
    ls_p0102      TYPE p0102,
    fs2           TYPE pa0102.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
    EXPORTING
      prelp = innnn
    IMPORTING
      pnnnn = ls_p0102.
" LOOP AT SCREEN. " ???
SELECT pernr grnum grstg FROM pa0102
    INTO CORRESPONDING FIELDS OF fs2
    WHERE pernr = ls_p0102-pernr.
    EXIT.
ENDSELECT.
IF ( fs2-grnum = ls_p0102-grnum    AND
       fs2-grstg = ls_p0102-grstg ).
    MESSAGE e398(00) WITH text-err
      RAISING error_occured.
ENDIF.
" ENDLOOP. " ???
Regards
Uwe

User Exits for Infotype 8

Hello Experts,
Please can anybody advise about the available user exits or includes for Infotype 8?
Many thanks,
Regards,
Anjali.

Hi Anjali,
User exits in PA30-
More relevant for IT0008:
PARA0001
PARA0002
PBAS0001
PBAS0002
HRPBAS0001
Less relevant:
HRPC0001
HRRPAI01
PBASRP01
Regards,
Dilek

Reg : User Exit for IA05 - Operation Overview

Hi Team,
I have a requirement in IA05 in the operation overview we have a field called Std Text field(PLPOD-KTSCH) , Where the user gives the text field in the screen,
So based on the text key i need to populate work,duration, in the same screen as attached
How can i achieve this i mean exit/badi??
i am trying but i am not getting a suitable one.
Please help he to crack this.
Thanks!
Karthik.S

EXIT_SAPLCPDA_001 -Customer-Enhancements for Tasklists
EXIT_SAPLCPDA_002 -Customer-Enhancements for Tasklists
EXIT_SAPLCPDO_001 -PS: User fields
EXIT_SAPLCPDO_002 -PS: Customer specific fields in process
EXIT_SAPLCPDO_003 -PS: Customer specific fields in process
EXIT_SAPLCPDO_004 -Test units of measure for reference operation set

User exit for infotype 8

Hi,
for specific country employees I want to add new field on basic pay screen to calculate new annnual salary based on some customer rules using uer exit. How shall i go about this?

Hello
For that you can access the P0008 structure in the PBO of your Z program generated, based on which you can do the calculation. Or else you can access the P0008 from the call stack of your program run.
Also, you can use the exit ZXPADU02 which gets triggered for all the infotype. But put a check on IT0008 for your requirement.
- Ranganath

User Exit for Infotype 2006

Hi,
I have the requirement to change the deduction date( from/to date) 3 months ahead
of the start date and enddate whenever the user enter it.
pls help me out with the issue .

Hello,
Can anybody help me out with the above scenario ?????????/

User exit for IT0185

Hi all,
Pls kindly help me to find out the user exit for infotype 0185. I want to check the value when saving a record.
Thanks,
Quanglv

Hi,
1. Go to transaction CMOD
2. Selct project PBAS0001
3. View components
4. Choose an exit
5. Click EXIT_SAPFP50M_002
6. This exit contains one include. Double click "ZXPADU02". The program ZXPADU02 runs executed every time PA30 or PA20 is executed.
7. Add in ZXPADU02 this code for example:
IF innnn-infty = '0105'.
add sone useful code specifically for it0105here
ENDIF.
good luck

Reg User Exit for Infotype 8

Similar Messages

Maybe you are looking for