Regain mouse control after movement

Hello,
I'm trying to do something that seems simple. While executing my vi, I'm trying to move the mouse to another open window to specific coordinates, click on a button of another program that starts that program running (it's not a labview program) and then move my mouse to another location and perform another click. I'm trying to use the user32.dll to do the mouse movement and clicking as several people have suggested on earlier threads.
My problem is that while the first movement of the mouse works fine, when it clicks on the other application I seem to lose all control of the mouse and cannot get control back unless I physically move the mouse and click back on my labview vi. I've tried changing the active window to switch back to my vi window as well as making the vi window on top, but those don't seem to give me control of the mouse again.
Any thoughts on if there's another function I should be using instead of user32.dll to move the mouse or any other ways I can regain control after that first movement? Thanks!

This reminds me on an issue i have while manual using Windows XP and Windows 7.
When initiating the shut down of the system, i am used to end all applications before hand. I do either terminate each application as it is recommended (Quit button), using the X of the Titlebar or simply pressing Alt+F4.
The latest option initiates the shut down of the active application. If used properly, you can shut down all application one after another without interacting with the PC otherwise (no mouse move, no other keys pressed).
The issue i observe in more than 50% times when doing so is: After closing the last application, the desktop is "in focus". But pressing Alt+F4 doesn't bring up the system shut down dialog. In this case (remember: more than 50% of all times!) i have to CLICK on the desktop and THEN can press Alt+F4 in order to get the system shut down dialog.
I assume that this situation is created by the way how Windows shuts down applications and manages "Active Application". I am confident that there is some kind of race condition: An application, which is still in shut down gets the focus, but then is terminated. Which means, no application is in focus now....
It is the same as during starting up applications with windows. Starting e.g. Firefox, i enter some URL (e.g. "forums.ni.com") and press enter. During load of the page, i start another application (e.g. LV). The LV launcher appears and suddenly, the Firefox window pops in front and displays the forums. I hate this behavior, as with other applications, the swapping of the active window takes place even during typing (e.g. entering passwords).
So i would expect you to run into a bug of the OS which is present for years now but never being addressed by Microsoft.
Norbert
PS: Sorry, i have no solution for you except the recommendtion: Try to set the "active application" programmatically. Don't know if this is possible if the calling application is not already in focus. Meaning: I am not sure if this programmatic approach can only be used to pass the "active" flag from the active application to another.
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

  • Loss of mouse control after waking from sleep

    I am running a Mac mini G4 (see specs below) with a remote Microsoft mouse-keyboard connection that uses a USB connection. I didn't turn on the computer for a month, I installed necessary updates to some programs, and control of the mouse pointer disappears after I waken it from sleep mode. I installed new batteries in the mouse, but it makes no difference. The keyboard works fine. Both the keyboard and the mouse were purchased with the computer, and I've never had a problem with either of them until now. What's wrong, and what can be done? Thanks very much. Peace.

    It's not an entirely unusual problem to have the mouse drop out when waking from sleep, and it's caused by the fact the system wakes before the connection to the mouse is re-established. To the system, that means the mouse appears to be missing, thus the driver doesn't load up for it. Cordless mice are amongst the most problematic in this respect because as the system wakes, not only does it have to recognize the cordless transceiver in time, but then also make contact with the mouse and correctly identify it. That isn't normally a problem, but it means almost anything that delays the chain of contact will result in the mouse failing to work. Note that if using a USB hub, this can exacerbate the problem significantly, so at least for testing, the mouse and keyboard should be connected directly to the system.
    There are a couple of simple tests to perform: firstly, does the mouse work perfectly when the system is booted rather than woken? Assuming it does, the next is whether the mouse works correctly if it is used to wake the system from sleep by clicking a button?
    If the mouse works correctly when the system is booted, then the problem is either that the mini's USB ports are not functioning entirely correctly, or that there is either a problem with the USB 'dongle' communicating with the mouse on wake up, or some interference in the area that is inhibiting error-free communication between the devices.
    In the latter instance, placing the mouse a few inches from the USB 'dongle' it communicates with and then waking the system is a good test, since the range is short and thus the risk of interference affecting communication is reduced. If it works like that, then you have something in the area that is causing communication problems.
    Assuming the mouse still doesn't work when left next to the dongle, then then next step is to try an PMU reset:
    -Unplug all cables from the computer, including the power cord.
    -Wait 10 seconds.
    -Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
    -Let go of the power button.
    -Press the power button once more to start up your Mac mini.

  • Quicktime Interactive Movie Mouse Control

    I have a quicktime interactive movie saved from keynote with chapters added in.
    The file pays full screen but at 800x600 screen resolution, the mouse left click button is not advancing the presentation. If I change the resolution to 1024x768 the mouse works again. What is the relationship between resolution and mouse control and how do I get it to work at 800x600?

    Tristan,
    As Rick indicated in his post, the answer lies in "manually"
    pausing the slides by inserting click boxes or buttons. I just
    wanted to add that if you have already recorded your movies and did
    not use Simulation mode, you can still easily insert a click box on
    each slide to pause them.
    1. On the first slide, insert a click box and set the options
    as you desire (turning off success/failure captions for
    instance...just don't uncheck the Pause movie until user clicks
    option, otherwise you will change the "nature" of the object that
    Rick was referring to.)
    2. Size the click box to as small as possible and place it in
    an out of the way location on the slide. (We often hide it under
    another object if it does not need to be clicked such as when used
    in conjunction with the auto playback controls.)
    3. Copy the click box
    4. On the filmstrip view, highlight all slides that you want
    the movie to pause
    5. Right Click on any one of the highlighted slides in the
    filmstrip view and select Paste Object
    This will paste a copy of your click box in the same location
    on all slides with the same settings as your original.

  • After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer.

    After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
    capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 4
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit 
    Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • How to control the movement of mouse cursor?

    Hi,
    I would like to ask
    how to write a java program to control the movement of mouse cursor?
    For example, when I press the "��" key on the keyboard, then the mouse cursor move upward.
    Thanks you very much

    Have a look at java.awt.Robot

  • No mouse control on mac mini

    hi, I'm a new user to ARD 3, I have it installed on my iMac core duo and use it to control/observe 2 machines in my home, my mothers and a freinds via internet. All of the machines are running 10.4.6 with the latest clients installed and the all work fine apart from one of the macines in my own home connected via ethernet. The mac in question is a 1.25ghz G4 Mini, I have done all system updates etc.. it has latest client, it has NO third party software as I have performed a clean install, The problem manifests itself by not giving me full mouse control. I can observe fine, I can apply cutains,get reports put to sleep etc. But when I try and control the mouse, the pointer appears in the very top left corner of the screen, I can pull the point away by about 2 inches(5cm!) but it just springs back again and won't let me click on anything???? weird or what?
    please shed some light on this as I think i'm going mad.
    regards steve

    I don't have a solution exactly, but a clumsy workaround that helps.
    I use my Powerbook to control a handful of computers for a volunteer job, but I also use it to control my two mac minis. The problem I have only happens, that I notice, on my own computers within my home network:
    Occasionally, the admin screen will stop updating the client, and the easiest way to get back control is to close the window, and retake control from the main admin window. Or, sometimes the wireless will go down due to me resetting/unplugging it or the occasional fluke. Regardless, after one of these occurences, there is a 1 in 3 chance that I can't control the client's mouse anymore.
    Just as described above, you can move the mouse a short distance (or really a short amount of time (~ half a second) before it snaps back to its original position. I always reasoned that the client still thought it was being controlled (i.e. I, the admin, never lost control) and so when I took control again, it thought another admin was vying for control. So either the original admin gets full control, or it can't resolve two admins controlling one client at the same time (makes sense, right?).
    So, the easiest workaround it to log out of the client computer and log back in. Occasionally, this isn't enough, and I'll restart the client, which always works.
    It really is interesting how Apple seems to put enough work in this to run almost perfectly for a home user to control a handful of computers, but it lacks in proper support for people who use it as it was intended, to administer a multitude of clients.

  • USB mouse freezes after wake from sleep.

    Since the 10.8.2 update my Logitech USB mouse freezes after waking up the computer from sleep or when it goes into energy save from non use. This also happens to my brand new MBPR. I tries repair permissions and reset the smc. Any suggestions?

    I get a frozen mouse (Microsoft Intellimouse Optical) on my 2012 Mac Mini running Mavericks (it did it with Mountain Lion also) when waking from sleep about 75% of the time which works again if I unplug/replug it (light is on and mouse buttons work when it's frozen, but the pointer won't move).  It does this whether I use a built-in USB3 port, a USB2 hub and now also with my new USB3 hub. 
    However, my 2008 Macbook Pro also has an Intellimouse connected to it when docked and it NEVER freezes when waking from sleep whether using the built-in USB2 port or a Gmyle USB3 card port.  Either way, the mouse wakes fine and it's the SAME MODEL MOUSE and SAME OSX verison.  I have no idea why the inconsistency.  It ***** because "Wake on Network Activity" FINALLY works right here in Mavericks with XBMC on my Mac Mini so there's a perfect opportunity to save some electricity.  I got excited when it woke up two times in a row with 10.9.1 and set up my sleep controls only to find it wouldn't go to sleep with the Energy Savings menu because I have an external USB3.0 3TB media drive connected (at all times).  I finally found out (through more patient testing) that once the drive spun down (possibly on its own power saving timer as I'm not sure the "Shut down hard drives when possible" setting works in Mavericks; it was messed up in Mountain Lion in 10.8.4 and even though 10.8.5 fixed it, I'm not sure Mavericks is using the same code.  It doesn't seem to shut down any faster with or without the setting on and shuts off several minutes after the computer attempts to go to sleep (on a 1 minute test setting; I think WD defaults to 10 minutes in firmware). 
    Anyway, once that was resolved and I saw it would go to sleep eventually once the drive spun down (it will sleep instantly if I select SLEEP from the Apple menu which I find odd if it's such a big deal that it's connected....), I thought OH BOY!  I'm all set.  Then I woke it from that sleep and found my mouse was frozen again..... :-(  What a PITA to unplug/plug the mouse every time it wakes from sleep.  It's not worth it.  I'll just have to pay the extra few bucks in electricity each month I could have saved to avoid such a freaking nightmare hassle.  Why on God's Green Earth, Apple CANNOT or WILL NOT fix their darn energy savings features is just beyond me.  Instead of spending all their time making horrible horrible ugly icon/GUI updates to iOS and making it slower and slower and slower, why don't they actually fix some darn bugs in OSX for once in their lives.... I'm starting to think I should give Windows another chance I'm so annoyed right now.  But then I think about having to run a malware program and have that program update and Windows software/security updates 3x a day and I think I can just deal with the Mini not sleeping.....
    I'd like to know why Apple couldn't figure out those of us with multiple monitors would want a dock on BOTH monitors all the time either (first side-mount docks wouldn't migrate and now in 10.9.1, bottom-mounted docks won't migrate here either, leaving a dock on one monitor all the time and if that's the monitor that is showing full-screen video, you lost your dock completely while the video is playing.  They finally figured out after a full decade that having a menu bar on both screens would be a good idea, but it just didn't occur to them that the same is true of the dock.  How much are they paying these guys?  Too much apparently (or is it too little to attract talented thinkers? Nah, it couldn't be since we give them feedback and they just ignore it).

  • My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words.

    My macbook pro is running very slow with some strange mouse and window movements. The trackpad is very unresponsive and when responding the cursor moves on its own and/or very erratically. When on safari the window suddenly zooms in or highlights words and looks them up via dictionary. I currently have a wireless mouse connected and I am still having the same problems.
    I fee like I may have a virus or my laptop is perhaps being accessed remotely. All of the sharing options are unchecked.
    HELP PLEASE
    Very worried!!

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • Update control of movement type is incorrect

    while planning for a material with mrp type pd and strategy group as 20(make to order) i created a customer requirement against which after running mrp the tran md04 showed purchase req for a particular material which was released by me and converted into purchase order by me.
    but when I wanted to do goods receipt against the po generated it is giving me this error in tranc migo.
    ERROR IS     "update control of movement type is incorrect entry (101 X X e b _ v)
    the performance assist screen shows this
    Update control of movement type is incorrect (entry 101 X X E B _ V)
    Message no. M7226
    Diagnosis
    The system could not find entry 101 X X E B _ V in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.

    Hi
    Check the T code OMJJ for the defining the MVt type also check the error is coming for MVT type 101 then check with mvt type 101 in t code OMJJ and check the updation control there.
    also consult your MM consultant for this error
    Regards
    Anupam Sharma

  • Update control of movement type incorrect

    Dear all,
    I have run a complete sales cycle from sales order creation to excise invoice generation. However, I have not done the PGI since in our case it is done after the billing. The materials have been dispatched and excise invoice submitted.
    Now, when I am doing PGI it is throwing an error "Update control of movement type incorrect (entry 601 _ X Q L _ V) ". I analysed and found that I have wrongly filled the Requirement Type in the sales order and corresponding entry is missing in OMJJ.
    1- I tried to add this entry but in vain. There is no 'New entry' or 'Copy as' button and hence i could not add..
    2- So, I tried the other alternative i.e. reversing all the documents and changing the RqTy in order. But that can't be done since excise has been sent.
    Is there any other way by which I can do the PGI or atleast capture the goods movement in the system and also update all the relevant documents?
    Plz guide.
    Thanks
    SAPshed

    To do the PGI / PGR , you have to cancel the Excise Invoice through J1IIN and then the Billing Document.Only after this , you can do the PGR or PGI.
    Best Regards,
    Ankur

  • Control-F2 "Move Focus to Menu Bar" only works occasionally

    I don't want to use my trackpad too much due to a strain injury, hence I use the Control F2 "Move Focus to Menu Bar" a lot.
    However this feature only works occasionally, it can work for hours and then suddenly stop working, sometimes I can fix in the Keyboard Shortcuts pref pane by unchecking and checking the "Move Focus to Menu Bar" checkbox, at other times it takes a restart of the system.
    I've been a big Apple fan-boy since OS 9, and I always marvel at the cool features in OSX, this is the first time I have a Windows-esque experience with the OSX UI
    I've also posted the above on the Apple Stackexchange, but nobody knows how to fix this.

    I too prefer to use the keyboard over mouse/trackpad. Being a switcher from Windows the default keyboard shortcut to "Move focus to the menu bar" of ^F2 (ctrl+F2) was just too awkward a combination for me, and so I redefined the shortcut to be ⌘-space (cmd+space) which is much closer to what I'd been used to in Windows (Alt+space).
    This has worked most of the time, from OSX 10.3 in 2004 right up to this weekend in 2011, using 10.6 whereas it now fails most of the time.
    What has happened to cause this turnaround? In trying to discover what I'd done "wrong", I noticed that for the first time this weekend I'd run Voice Over (the OS X app). And probably by no coincidence, now, I can only successfully execute my keyboard shortcut to "Move focus to the menu bar" during the introductory announcement of Voice Over: "Welcome to Voice Over. Voice Over speaks descriptions of items on the screen and can be used to control the computer using only your keyboard. If you already know how to use Voice Over press the V key now. If you want to learn how to use Voice Over press the space key now". Hence, I have about twenty seconds of available time to use my ⌘-space (cmd+space) shortcut.
    I can achieve a working shortcut by reverting away from my ⌘-space (cmd+space) shortcut, and restoring the default ^F2 (ctrl+F2), or some other different shortcut such as ⌘-, (cmd+comma).
    So, I wonder, if my experience adds anything to the [already slightly stale] discussion?

  • Controlling Captivate movies from a parent Flash movie

    Hello, i am in the works of onverting my old AS2 code, for controlling Captivate movies lodaded into a Flash container, over to AS3 becasue of the transition to Captivate 5. There were some weird issues in AS2 and Captivate 3 which i fortunately vere able to solve when i first made this container. Now i am getting weird and unpredictable results when trying to set the appropriate variables in the Captivate move. The main culprit is: rdcmndRewindAndStop, it does indeed rewind the movie, but... it starts playing again... Could anyone be so kind to give me the reason why or better even provide me with a solution to this unneeded change, its quite annoying, and no rdcmndPause does not help, not before rdcmndRewindAndStop or after, the movie is happily trottling along...
    sincerely
    Frustrated developer with a bloody short deadline

    Hello and thanks for replying, yes it worked! But... we have to manually edit 40+ files to make this stupid thing to work... Do you know if there is any way i can put those scripts in a flash object, or better even modify the movie from the parent container? This is making our production process way longer than is affordable tbh, a single project consists usually of over 100 captivate movies, and we simply can't manually edit each and every one of them.
    I wish i could get my hands on a Captivate developer ;p

  • Controlling QT movies in a slide... no controller in KN 3?

    I just got my copy of Keynote 3 hoping two things had made it to this new version:
    1. HTML export... no go.
    2. QT movies' controller available to pause, stop, rewind, ffw,etc. a movie in a presentation... I couldn't do it either....
    Has someone been able to do this? I just can't believe that after so many users asking for this and griping about it Apple did not include it... after all, it seems to me it's a basic function of their own media player...

    are you referring to an option on Export? When I go
    to File/Export the options I get are Quicktime,
    PowerPoint, PDF, Images, and Flash. No HTML... I have
    been using flash as export, but would like something
    similar to the html exporting function present in
    PowerPoint.
    It sounds like you're running Keynote 2.0. Perhaps you launched Keynote from the icon on the dock? I've noticed that the installer leaves the old version of Keynote around. The new version is in a "iWork '06" directory in your applications folder.
    The new export panel is noticeably different from the old. It has a top row with buttons instead of a panel with buttons going down.
    There is the ability to control QuickTime movies
    as
    well, but it would depend upon how large your
    video
    is... certain control schemes are available along
    the
    bottom of the video as it plays, but only if you
    have
    the horizontal room for it. Maybe there's a
    problem
    with your install?
    Can you elaborate on how you do this please? When I
    insert a quicktime movie, it plays automatically upon
    opening that slide with no controls to pause, stop,
    etc. I can have it start on click if I create a
    build-in transition for it, but that's about it.
    Maybe I'm missing something obvious?
    Kyn is right. Check to see which version of Keynote you're running.

  • When working mouse will randomly move even when I'm not moving it

    When working on my computer my mouse will randomly move even when I'm not moving it. It is like I have a ghost mouse that is moving across the screen by itself. I checked and made sure screen sharing isn't on. It occurs randomly from what I can tell. It happened twice tonight where I'm on a window with my hand on the mouse and the cursor will move up to the top of the screen and then to the very left (which will turn on my screen saver). I will make me feel better if someone has seen this to. It happens very quickly and I can get control of my mouse. I have seen this off and on for a while. Anyone else?

    I have the same issue.
    It is a wired Mighty Mouse on a 24" iMac. My Macbook Pro with Wireless Mighty Mouse has never had an issue that I can recall, only the desktop.
    It's pretty **** annoying to be fencing something in on Photoshop and suddenly your mouse is up in the corner of the screen and you've selected half your picture.
    Anyone have any thoughts? What are the common denominators here?
    As I said, 24" iMac running 10.5.5(although it has been happening since I purchased the computer somewhere around 10.5.3) Corded Mighty Mouse, Aluminum Keyboard. Can't think of any other relevant information....

  • Webforms10g: initialize of mouse control?

    Hello,
    It happens sometimes in a multi record block that the cursor stays on the item of the current record and does
    not move to another record with a mouse click.
    Is there any command to initialize the mouse control?
    Maybe: synchronize?

    This has been an on and off problem with every version of Jinitiator. I've seen it many times before. Just use the TAB once or twice, and it will work again.

Maybe you are looking for