Regarding attributes of 0Sold_To

Hi,
I am having an issue regarding Customer InfoCube(0SD_C01). In this cube I need Plant details. This cube consists of Sold-to party which consists of Plant as attribute. But in the BEx output I am receiving # values for the Plant values. How to display the plant attribute details???
Regards
Jay

Hi Jay,
Sold to party must be the reference characteristic of 0customer. check in infoobject change screen. To see the master data in reports, you need to maintain the master data in this refernce characteristic. If you load data for 0customer, you will automatically get it for sold to party.
Regards,
Wrush

Similar Messages

Regarding attribute change runs in process chains

Hi All,
While creating process chain for master data objects. I am trying to incorporate attribute change run process type for an info object. But the system asks for the DTP of the attribute and when i choose the DTP then both DTP and then Attribute are being incorporated. This is not exactly a problem but i need to understand why it is happening as i am already using that DTP to load data. Will this affect the data in master data object?. Thanks in advance.
regards
satish

Hi Bhagyarekha,
The reason behind that error could be:
An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
Check this SAP Note:
Note 684405 - Replacing the compounding and deleting navigation attr.
Hope it helps.
Veerendra.

Regarding Attribute Change Run failure.

Dear All,
We have a process chain which contains many meta chains.
Now in each chain i mean meta chain there are attribute change runs
We have desegregated the attribute change run. is tere any method to place a check for attribute change run locks because at the last i have another attribute change run which is failing every day because of the attribute change run is still happenign in some chain.
how do i implement it?
Thanks in advance
Janardhan Kumar.

Hi Janardhan,
In master data process chain where you have added process of attribute change, just insert a program before this process:
The program is: RSDDS_CHANGERUN_MONITOR
This program will check for any another attr change run running at that time and if there's any other attr change run runnning locking the object which your next attr change run requires then this program will not allow your attr change run to run.
Once all the locks all cleared for attr change run it will trigger the next node.
This program has a do loop which keeps on checking until unless locks are cleared.
Regards,
Vij

Regarding attribute set

Hi experts,
I have attribute name (CRM-Markrting-Attribute Name ) from Table CABN , i want to get corressponding Attribute Set.
please specify the table or FM for this.
thanks and regards
Subba.

Hi,
Can u check with FM" CRM_MKTBP_CHANGE_BP "
This is for Business partner.
Also check out function moduels in function group
CRM_MKTBP_DB. This contains many FM to read/assign marketing attribute set to BP.
Regards.

Regarding attribute FORWARD_WI

Hi,
I want to avoid the approval workitems sent as mail to a particular user.
The FORWARD_WI is set to 'X' in the Purchasing Org. So the attribute is inherited to the user. is it ok if I check 'excluded' of the attribute in the user to avoid mails to him?
Thanks in advance.
Regards
Ramesh.

Hi. If you add it again at that level and exclude it should work as you want it to.
Alternatively, you could go to table T77OMATTR and change how the inheritance works for that attribute.
If you change it to "Local values overwrite inherited values" you can actually change it at the lower level.
Regards,
Dave.

Regarding Attribute Change Run in Bi 7.0 version

Hi Experts,
Recently i tried to execute the
ACR using the program " rsdds_aggregates _maintain" in bi 7.0
But it showed the message the program does not exist in status bar.
Recently our project has upgraded to 7.0 .
Is there any other program for ACR in bi 7.0 ?

Hi,
The same program is available in BI 7.0.
Please check the same in SE38 Transaction.
Regards,
Nitin Pardeshi

Query regarding attributes in web application

Hi Forum,
1. We have Session Attributes which are available through out the session for an user in web application. These can be set by session.setAttributes and can be accessible by session.getAttributes in application either in JSP or Java Class
2. Then we have request paramaters which are available in request just like session variables they are accessible.
I wanted to know that ,is there any method through which the attributes can be set or retrieved through out the application(in JSP and Java class both) for every user?Unlike session variables, they disappear after session invalidates.
Nitin

Please don't repost/crosspost the same question over all places. That question is already answered before: [http://forum.java.sun.com/thread.jspa?threadID=5309515]. I also already answered your doubleposted question before: [http://forum.java.sun.com/thread.jspa?threadID=5309848]. If you don't understand it, please respond so instead of brainlessly posting a new topic. Your crosspost is also already answered: [http://forum.java.sun.com/thread.jspa?threadID=5310907].

Query regarding attributes v/s properties.

1.) Can we use properties as attributes in Java objects instead
of instance or static variables?
2) If so,what are the advantages of using properties?
3) Can you please give me an example of using properties as attributes
in a Java class?
Thanks,

I am looking into a 3rd party code.This object is using marker interfaces as properties and using getter and setters.
public class Aim
 public enum Property implements PropertyInterface {
 LOCATION;
 public SortedSet<Location> setLocations(SortedSet<Location> locations) {
 public SortedSet<Location> getLocations() {
}Location is an object by itself.
I was wondering about the why this style is being used?

Regarding attributes

Hi
i have 2 questions
1) in char update rules we have MASTER DATA ATTRIBUTE OF ,when we use this what happns and how the data will be loaded ie ,record by record or data package by package or all data at once.
2) when the load is taking more time ,how do we debug,what is the first step we do.
how do we debug the failed load.
normally what is the procedure to check/debug when a loading process is taking more time
points will be assigned

Hi,
You use master data attribute of" option in the Update Rules when the value of the characteristic is not available from the datasource fields..but it is a master-data attribute of one of the infoobjects present in the communication structure..
in such case..use this option..
example..u required contract-account in the cube..but it isnt available from datasource..but contract is present in datasource..and contract account is a master data attribute of contract..
so this option will be used while creating update rule for contract account infoobject...MDA of (contract)..
For your second part,
there may be lot of options which may cause loading to take time.
If you are loading in cubes, try and fit in chars in proper dimesnions. debugging comes into play if you have wriiten start routine or object level routines in the transfer rules or update rules. For debugging simply write BREAKPOINT, where you want the code to stop so that you can analyse.
Hope this helps.
thanks,
rahul

Navigational attributes are not visible after transport

hi,
i have created five new info objects and added these to 0custome as navigational attributes,then i have switched thes on as navigational attributes in 0sold_to info object.every thing is working fine in deveopment.
when i transport these into quality, for 0customer i am able to see these new info objects as navigational but in 0sold_to these new info objects are visible as display attributes.I want tehse to be as navigational attributes..
can any one tell me where have i gone wrong..
thanks in advance..
satish

Hi,
The SAP Best Practice says that while transport
Request 1: Select the Necessary objects of Info Provider
Request 2: Select Data Flow before and Afterwards
if you practice this you will not miss any objects
regards
Happy Tony

Error - The attributes for user could not be determined

When I login as a Buyer (with role ZTSX_EC_BBP_PURCHASER - copy of SAP_EC_BBP_PURCHASER), I get the foll. error while trying to Process Purchase Orders:
The attributes for user could not be determined
It does not happen on other transactions (like Sourcing or Issue POs).
The buyer is in the org. plan and I have checked the attributes and they seem ok.
What could be the issue ???
Thanks
-Bakulesh

Hi
Please go through these links ->
The attributes for user could not be determined --
'Error in writing attributes' when using function tab
Company code for system missing in user attributes
BBP_POC not working in SRM 5.0
Re: urgent: regarding ATTRIBUTES
Regards
- Atul

How to push Texts along with attributes to MDM

Hi All! There are lot of information how to push data to MDM via OHD. But all of that is regarding Attributes(and it works fine). Anybody knows how to push Texts data along with attributes?

Hi,
Refer https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b01e4269-f744-2b10-929b-fa7b49aac540
Hope it helps.
Thanks,
Minaz

Custom attributes in vendor group

Hi,
I am unable to see custom Attributes after upgrading from SRM 3.0 to SRM 5.0
As per SRM 5.0 the vendor root is visible now in PPOMV_BBP.
As per post upgrade document if we register custom attribute in T77OMATTOT then the attributes should be visible in PPOMV_BBP
Still the attributes are not visible in PPOMV_BBP
can anyone suggest on the same
Helpful aswers will be rewarded.
Thanks
jayesh

Hi
T77OMATTR is the main table.
Please have a look in the other tables as well.
T77OMATDIR General Attribute Maintenance: Change Information
T77OMATGT Attributes of General Tree-Overview Object
T77OMATGTC Attributes of General Tree-Overview Object
T77OMATTDB General Attribute Maintenance: Help Indices for Attributes
T77OMATTIX General Attribute Maintenance: Index Analysis
T77OMATTOT Gen. Attribute Maintenance:Attributes per Obj.Type/Scenario
T77OMATTR General Attribute Maintenance: Definition of Attributes
T77OMATTRT General Attribute Maintenance: Text Tables for Attributes
T77OMATTSC General Attribute Maintenance: Application Scenarios
T77OMATTST General Attribute Maintenance: Texts on Scenarios
T77OMATTUS General Attribute Maintenance: Attributes per Scenario
Other useful links ->
Looking up Org. Paln Attributes
Re: Creating a new custom attributes in org structure
Re: The attributes for user could not be determined --
Re: Attributes dropdown list empty in settings (SRM 5.0)
urgent: regarding ATTRIBUTES
Regards
- Atul

BWonHANA: Attribute Change Runs (ACR)

Dear all,
I have a question regarding Attribute Change Runs (ACR) in BW system running on HANA.
According document: Attribute Change Run it suggests that ACR may not be needed in BW running on HANA DB. However I'm looking for some experience in this topic. So is ACR needed? If so does it run faster comparing to legacy DB?
thank you
m./

Hi Martin,
go through below thread for existing experience:
Program to run Attribute Change run
Attribute Change Run – Strategies and Parameters
Attribute Change Run concepts - SAP NetWeaver Business Warehouse - SCN Wiki
LET'S BE BETTER IN SAP BI: Why Attribute Change Run in SAP BI 7.0 is required?
Regards,
V Srinivasan

Deleting inherited attribute using FM 'BBP_UPDATE_ATTRIBUTES'

Hi Forum,
I am trying to delete one value for attribute CAT using FM BBP_UPDATE_ATTRIBUTE , this attribute value is Inherited but I am unable to delete it.
I tried this:
1. Set the inherited flag to space using the same FM (in PPOSA_BBP I can see that inherited checkbox is not checked now)
2. Try deleting the attribute using same FM (now the inherited flag is SET in PPOSA_BBP instead of deleting the attribute value)
Is it not possible to delete inherited attribute or set inherited to space in PPOSA_BBP using BBP_UPDATE_ATTRIBUTES FM ?
Another query is in this FM only USER_ID_P and ORGUNIT_ID_P are import parameters, how can we update attributes of a POSITION using the FM?
Thanks,
Anubhav

Hello Anubhav,
Inheritance between objects cannot be managed by any function module.
Even if it can be done with a function module i don't know, it will be overwritten by your current customizing ( OOATTRCUST transaction) for attribute CAT.
Regarding attributes update for positions, did you try with import parameter IS_OBJECT (OTYPE = 'S' and OBJID = position ID) ?
Regards.
Laurent.

Regarding attributes of 0Sold_To

Similar Messages

Maybe you are looking for