Regarding CHNAGE DISPLAY REPORT (MM04)

HI,
I want to make a report in which i want to display the changes made to materials in given period,as it is display in tcode MM04.
IN DIS tcode it use display change in a 1 material as i want to display all the materials in a purticular month.
plzz help me out which tabels i should use,till now i am able to know 1 table CDHDR.
PLZZ HELP ME OUT AS I WANT TO DISPLAY THE TEXT ALSO WHIC IS DISPLAYED IN MM04 THAT DESE R CHANGES MADE.
PLZZ HELP ME OUT AS HELP WILL BE DEFINATELY REWARDED.

hi,
dis is d code which is i am using right now for my report:-
plzz checkit out:-
REPORT ZNEW01 no standard page heading LINE-SIZE 310.
TABLES: CDHDR,CDPOS.
DATA: BEGIN OF ITAB OCCURS 0,
      OBJECTCLAS LIKE CDHDR-OBJECTCLAS,
      OBJECTID LIKE CDHDR-OBJECTID,
      USERNAME LIKE CDHDR-USERNAME,
      UDATE LIKE CDHDR-UDATE,
      UTIME LIKE CDHDR-UTIME,
      TCODE LIKE CDHDR-TCODE,
      CHANGE_IND LIKE CDHDR-CHANGE_IND,
      END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0,
      OBJECTCLAS LIKE CDPOS-OBJECTCLAS,
      OBJECTID LIKE CDPOS-OBJECTID,
      FNAME LIKE CDPOS-FNAME,
      CHNGIND LIKE CDPOS-CHNGIND,
      VALUE_OLD LIKE CDPOS-VALUE_OLD,
      VALUE_NEW LIKE CDPOS-VALUE_NEW,
      END OF ITAB1.
SELECT-OPTIONS: M_DATE FOR CDHDR-UDATE,
                U_ID FOR CDHDR-CHANGE_IND.
SELECT BOBJECTCLAS BOBJECTID BUSERNAME BUDATE BUTIME BTCODE B~CHANGE_IND INTO
TABLE ITAB
FROM CDHDR AS B WHERE B~OBJECTCLAS = 'MATERIAL' AND UDATE IN M_DATE AND CHANGE_IND IN U_ID.
Check not itab[] is initial.
SELECT OBJECTCLAS OBJECTID FNAME CHNGIND VALUE_OLD VALUE_NEW INTO TABLE
ITAB1 FROM CDPOS
FOR ALL ENTRIES IN ITAB WHERE OBJECTID = itab-objectid and objectclas = ITAB-OBJECTCLAS .
ULINE.
LOOP AT ITAB.
WRITE:/ ITAB-OBJECTID,22 ITAB-USERNAME,ITAB-UDATE,ITAB-UTIME,ITAB-TCODE.
LOOP AT ITAB1 WHERE OBJECTCLAS = ITAB-OBJECTCLAS AND OBJECTID = ITAB-OBJECTID.
WRITE: 60 ITAB1-FNAME,ITAB1-CHNGIND,ITAB1-VALUE_OLD(40),ITAB1-VALUE_NEW(40).
ENDLOOP.
ENDLOOP.
IN DIS REPORT IT IS NOT DISPLAYING ALL THE VALUES IT IS SHOWING BUT WHEN I REMOVE :-
M_DATE FOR CDHDR-UDATE
IT SHOWS ALL THE DATEAS BUT I WANT TO DISPLAY WITH IN PURTICULAR DATE,
PLZZ HELP ME OUT BY MODIFYING IN DIS CODE AS HELP WILL DEFINATELY REWARDED.

Similar Messages

Display reports from BW using WAD on blackberry

Hi All,
I have to display reports from BW using WAD on blackberry
can any one please guide me how to do it?
awaiting Reply
Thanks & Regards
Prasad

you have to integrate SAP Mobile infrastrcture with BW system to achive this.

Error in displaying report

I am geting the following error while displaying report-
<b>Internal error (-101) occured [Message 131-183]</b>
The reports are geting displayed on other pcs but not on my pc.I tried unistalling and re-installing sap but the error was not solved.

Daan,
       The printer was not installed on my pc.After installing printer, the reports are visible.Thanks for u r help.
                                                                                Regards,
                                                                                Dilip Kumbhar

Error while displaying report

I am getting following error while displaying report in sap business one-
<b>Internal error (-101) occured [Message 131-183]</b>
I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.

Hi Yogesh,
       I haven't installed any patch on my client machine.
                                                                                Regards,
                                                                                Dilip Kumbhar

Display report in PDF w/o save

Hi,
I want to display Report on xmii browser without saving , I tried PDF action but it is giving error when calling url "File doesn't begin with %PDF-". When using image saver for saving file it saved on given path successfully.
I also used isBinary=true in url paremeter, which I found in forum for one of the reason of this error but still it didn't work.
Steps I am following for test case:
1. Create PDF document action block
2. Create PDF page action block - link to pdf document
3. Craete PDF text action block with some value - link to pdf document
4. Assign output parameter of PDF document action to BLS transaction output of type string.
5. call url:
http://servername/Lighthammer/Runner?Transaction=TestBLS/TestPDF&OutputParameter=Output&isBinary=true&Content-type=application/pdf
Please advise if I am missing something, I am using xMII 11.5.
Thanks and Regards,
Alok

Muzammil - Indeed Runner works with 11.5 too and its the Key to trigger a BLS trx via URL.
You can use Illuminator to execute Query templates so on via URL.
Alok - Your URL looks good but still if you are getting same error "%PDF" then check whether you are providing exact Output parameter you have mapped in BLS trx.
Also you can refer to below few threads on the same issue.
[Thread1|Displaying PDF files created with BLS in xMII 12]
[Thread2|Creating PDF]
[Thread3|Stream a PDF using Runner ?]
Hope this helps!!
Regards,
Adarsh

Regarding events in reports

Hi guys,
i got a doubt in reports on events
how many events are there in reports.....
and what's the function of them...can any one help me plzzzz
regards
venu

hi,
events:
http://www.sap-img.com/abap/events-related-to-reporting.htm
Events in Classical Reports
Initialization.
At selection-screen.
At selection-screen on <field>.
Start-of-selection.
Top-of-page.
End-of-page.
End-of-selection.
Initialization.
We can initialize the selection-screen with calculated default values under this event.
Initialization.
s_date-high = sy-datum.
s_date-low = sy-datum - 15.
Append s_date.
At selection-screen.
We can validate all the inputs on selection screen fields under this event.
At selection-screen.
If s_carrid-low is initial or s_connid-low is initial or s_date is initial.
< ... code for validation... >.
Endif.
At selection-screen on <field>.
We can validate a particular field input on selection screen under this event.
At selection-screen on s_carrid.
If s_carrid-low < > 銑H・
<・code for validation・
Endif.
Start-of-selection.
By default the program is under this event.
If any of the other event comes before
全elect・ndselect.・statements, then to break
that event, we require this S-O-S event.
Start-of-selection.
Select * from ・
・・
Endselect.
Top-of-page.
If we need some portion of the output (like
column headings) to appear in all the pages,
then we use this event.
Top-of-page.
Write:/ 舛arrier・10 舛onnection・20 船ate・
If there is no external output statement before
禅op-of-page・event, then this event will not
work.
End-of-page.
Once the cursor reaches the last line of the
page, automatically this event will be triggered.
Report Zxxx line-count 25(3).
In this case line numbers 23, 24 and 25 are
reserved for footer.
Once the cursor reaches 23rd line, this event
will be triggered.
End-of-page.
Write:/ sy-uline(75).
Write:/ 禅his is end of page:・sy-pagno.
Write:/ sy-uline(75).
End-of-selection.
This event is used for concluding part of List.
End-of-selection.
Write:/ 禅his is end of the Report・
Additional events in interactive reports
The following additional events are applicable to secondary lists.
Top-of-page during line-selection.
At line-selection.
At user-command.
These additional events are triggered when u perform some action on the basic lists.
example:
REPORT zwk22671 LINE-COUNT 40(3)
LINE-SIZE 200
NO STANDARD PAGE HEADING.
TABLES : mkpf , "MATERIAL DOCUMENT
mseg , "DOCUMENT SEGMENT : MATERIAL
t156t , "MOVEMENT TYPE TEXT
makt. "MATERIAL DESCRIPTIONS
*STRUCTURE OF INTERNAL TABLES
DATA : BEGIN OF xtab,
mblnr TYPE mkpf-mblnr , "DOCUMENT NUMBER
mjahr TYPE mkpf-mjahr , "YEAR
budat TYPE mkpf-budat , "POST DATE
blart TYPE mkpf-blart , "DOCUMENT TYPE
END OF xtab.
DATA : BEGIN OF ytab,
mblnr TYPE mseg-mblnr , "DOCUMENT NUMBER
mjahr TYPE mseg-mjahr , "YEAR
zeile TYPE mseg-zeile , "ITEM NUMBER
bwart TYPE mseg-bwart , "MOVEMENT TYPE
btext TYPE t156t-btext , "MOVEMENT DESCRIPTION
matnr TYPE mseg-matnr , "MATERIAL NUMBER
maktx TYPE makt-maktx , "MATERIAL DESCRIPTION
meins TYPE mseg-meins , "UNIT OF MEASURE
menge TYPE mseg-menge , "QUANTITY
dmbtr TYPE mseg-dmbtr , "AMOUNT
END OF ytab.
*INTERNAL TABLE DECLARATION
DATA : i_tab1 LIKE STANDARD TABLE OF xtab WITH HEADER LINE. "INTERNAL TABLE 1 : CONTAINS MATERIAL DETAILS
DATA : i_tab2 LIKE STANDARD TABLE OF ytab WITH HEADER LINE. "INTERNAL TABLE 2 : CONTAINS ITEMWISE MATERIAL DETAILS
*VARIABLES
DATA : v_color TYPE sy-tabix , "FOR SETTING COLOR FORMATS DURING GENERATING REPORT
v_field(20) , "FOR STORING THE CLICKED FIELD NAME
v_value(20) , "FOR STORING THE CLICKED FIELD VALUE
v_mblnr TYPE mkpf-mblnr , "FOR VALIDATING DOCUMENT NUMBER
v_mjahr TYPE mkpf-mjahr , "FOR VALIDATING DOCUMENT YEAR
v_bwart TYPE mseg-bwart , "FOR VALIDATING MOVEMENT TYPE
v_matnr TYPE mseg-matnr . "FOR VALIDATING MATERIAL NUMBER
**SELECTION-SCREEN
SELECTION-SCREEN : BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_mblnr FOR mkpf-mblnr , "DOCUMENT NUMBER
s_mjahr FOR mkpf-mjahr OBLIGATORY, "DOCUMENT YEAR
s_bwart FOR mseg-bwart NO INTERVALS NO-EXTENSION, "MOVEMENT TYPE
s_matnr FOR mseg-matnr . "MATERIAL NUMBER
SELECTION-SCREEN : END OF BLOCK blk1.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
PERFORM validation. "PERFORMS VALIDATION OF SELECTION-SCREEN FIELDS
*TOP-OF-PAGE
TOP-OF-PAGE.
PERFORM header. "CREATES HEADER FOR THE BASIC LIST
*END-OF-PAGE
END-OF-PAGE. "CREATES FOOTER FOR THE BASIC AND SECONDARY LIST
PERFORM footer.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM generation_basic. "GENERATES REPORT FOR BASIC LIST WHICH CONTAINS DOCUMENT NO , DOCUMENT YEAR
"POST DATE , DOCUMENT TYPE.
*END-OF-SELECTION
END-OF-SELECTION.
PERFORM report_basic. "DISPLAY REPORT FOR BASIC LIST
*AT LINE-SELECTION
AT LINE-SELECTION.
PERFORM generation_secondary. "GENERATES REPORT FOR SECONDARY LIST BASED ON THE DOCUMENT NUMBER AND DOCUMENT YEAR
"WHICH CONTAINS DOCUMENT NO , YEAR , ITEM NO , MOVEMENT TYPE , MOVEMENT DESCRIPTION ,
"MATERIAL NUMBER , MATERIAL DESC , UNIT OF MEASURE , QUANTITY AND AMOUNT
*TOP-OF-PAGE DURING LINE-SELECTION
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header_secondary. "CREATES HEADER FOR THE SECONDARY LIST
*AT USER-COMMAND
AT USER-COMMAND.
PERFORM user_secondary. "SUBROUTINE FOR HANDLING USER EVENTS
FORM validation .
*VALIDATING MATERIAL DOCUMENT NUMBER
SELECT SINGLE mblnr
INTO v_mblnr
FROM mkpf
WHERE mblnr IN s_mblnr.
IF sy-subrc NE 0.
MESSAGE 'ENTER CORRECT DOCUMENT NUMBER' TYPE 'E'.
ENDIF.
*VALIDATING MATERIAL DOCUMENT YEAR
SELECT SINGLE mjahr
INTO v_mjahr
FROM mkpf
WHERE mjahr IN s_mjahr.
IF sy-subrc NE 0.
MESSAGE 'ENTER CORRECT MATERIAL DOCUMENT YEAR' TYPE 'E'.
ENDIF.
*VALIDATING MOVEMENT TYPE
SELECT SINGLE bwart
INTO v_bwart
FROM mseg
WHERE bwart IN s_bwart.
IF sy-subrc NE 0.
MESSAGE 'ENTER CORRECT MOVEMENT TYPE' TYPE 'E'.
ENDIF.
*VALIDATING MATERIAL NUMBER
SELECT SINGLE matnr
INTO v_matnr
FROM mseg
WHERE matnr IN s_matnr.
IF sy-subrc NE 0.
MESSAGE 'ENTER CORRECT MATERIAL NUMBER' TYPE 'E'.
ENDIF.
ENDFORM. " VALIDATION
FORM header .
WRITE :/30 'MATERIAL DOCUMENTS' COLOR 1. "TITLE OF BASIC LIST
WRITE :/1(89) sy-uline.
FORMAT COLOR 1.
WRITE :/1 sy-vline ,
3 'DOCUMENT NUMBER' ,
23 sy-vline ,
25 'YEAR' ,
45 sy-vline ,
47 'POST DATE' ,
67 sy-vline ,
69 'DOCTYP' ,
89 sy-vline .
FORMAT RESET.
WRITE :/1(89) sy-uline.
ENDFORM. " HEADER
FORM footer .
IF sy-lsind EQ 0. "CHECKS WHICH LIST IS IT BASIC LIST OR SECONDARY (AND NO. OF SECONDARY LIST)
WRITE :/1(89) sy-uline.
ELSEIF sy-lsind EQ 1.
WRITE :/1(192) sy-uline.
ENDIF.
ENDFORM. " FOOTER
FORM generation_basic .
SELECT mkpf~mblnr "DOCUMENT NUMBER
mkpf~mjahr "DOCUMENT YEAR
mkpf~budat "POST DATE
mkpf~blart "DOCUMENT TYPE
INTO TABLE i_tab1
FROM mkpf INNER JOIN mseg ON mkpfmjahr EQ msegmjahr AND
mkpfmblnr EQ msegmblnr
WHERE mkpf~mblnr IN s_mblnr
AND mkpf~mjahr IN s_mjahr
AND mseg~bwart IN s_bwart
AND mseg~matnr IN s_matnr.
IF sy-subrc NE 0.
WRITE :/ 'MATERIAL DATA NOT FOUND'.
ENDIF.
DELETE ADJACENT DUPLICATES FROM i_tab1 COMPARING mblnr mjahr.
ENDFORM. " GENERATION_BASIC
FORM report_basic .
LOOP AT i_tab1.
v_color = sy-tabix MOD 2.
IF v_color EQ 0.
FORMAT COLOR 1 INTENSIFIED OFF.
ELSE.
FORMAT COLOR 2 INTENSIFIED OFF.
ENDIF.
WRITE :/1 sy-vline ,
3 i_tab1-mblnr ,
23 sy-vline ,
25 i_tab1-mjahr ,
45 sy-vline ,
47 i_tab1-budat ,
67 sy-vline ,
69 i_tab1-blart ,
89 sy-vline .
HIDE : i_tab1-mblnr , i_tab1-mjahr. "STORING THE VALUE OF FIELDS CLICKED IN SYSTEM AREA
ENDLOOP.
FORMAT RESET.
WRITE :/1(89) sy-uline.
ENDFORM. " REPORT_BASIC
FORM generation_secondary .
IF sy-lsind EQ 1.
SET PF-STATUS 'DISPLAY'.
GET CURSOR FIELD v_field VALUE v_value. "GET THE FIELD VALUE AND NAME WHERE THE CURSOR WAS CLICKED
CASE v_field.
WHEN 'I_TAB1-MBLNR'. "DISPLAYS SECONDARY LIST ONLY IF DOCUMENT NUMBER IS CLICKED
SELECT mseg~mblnr "DOCUMENT NUMBER
mseg~mjahr "DOCUMENT YEAR
mseg~zeile "ITEM NUMBER
mseg~bwart "MOVEMENT TYPE
t156t~btext "MOVEMENT DESCRIPTION
mseg~matnr "MATERIAL NUMBER
makt~maktx "MATERIAL DESCRIPTION
mseg~meins "UNIT OF MEASURE
mseg~menge "QUANTITY
mseg~dmbtr "AMOUNT
INTO TABLE i_tab2
FROM ( ( mseg INNER JOIN t156t
ON msegbwart EQ t156tbwart )
INNER JOIN makt
ON msegmatnr EQ maktmatnr )
WHERE mseg~mblnr EQ i_tab1-mblnr
AND mseg~mjahr EQ i_tab1-mjahr
AND t156t~spras EQ sy-langu
AND makt~spras EQ sy-langu.
DELETE ADJACENT DUPLICATES FROM i_tab2 COMPARING mblnr mjahr.
WHEN OTHERS.
MESSAGE 'SELECT DOCUMENT NUMBER' TYPE 'E'.
ENDCASE.
LOOP AT i_tab2.
v_color = sy-tabix MOD 2.
IF v_color EQ 0.
FORMAT COLOR 1 INTENSIFIED OFF.
ELSE.
FORMAT COLOR 2 INTENSIFIED OFF.
ENDIF.
WRITE :/1 sy-vline ,
3 i_tab2-mblnr ,
12 sy-vline ,
14 i_tab2-mjahr ,
19 sy-vline ,
21 i_tab2-zeile ,
30 sy-vline ,
32 i_tab2-bwart ,
40 sy-vline ,
42 i_tab2-btext ,
72 sy-vline ,
74 i_tab2-matnr ,
94 sy-vline ,
96 i_tab2-maktx ,
146 sy-vline ,
148 i_tab2-meins ,
153 sy-vline ,
155 i_tab2-menge ,
170 sy-vline ,
172 i_tab2-dmbtr ,
192 sy-vline .
ENDLOOP.
WRITE :/1(192) sy-uline.
FORMAT RESET.
ELSEIF sy-lsind EQ 2.
GET CURSOR FIELD v_field VALUE v_value. "GET THE FIELD VALUE AND NAME WHERE THE CURSOR WAS CLICKED
CASE v_field.
WHEN 'I_TAB2-MBLNR'. "DISPLAYS SECONDARY LIST ONLY IF DOCUMENT NUMBER IS CLICKED
SET PARAMETER ID : "SETTING PARAMETER ID FOR DOCUMENT NUMBER AND YEAR.
'MBN' FIELD i_tab2-mblnr ,
'MJA' FIELD i_tab2-mjahr.
CALL TRANSACTION 'MB03' AND SKIP FIRST SCREEN. "CALLING TRABSACTION CODE 'MBO3'.
WHEN OTHERS.
MESSAGE 'SELECT DOCUMENT NUMBER' TYPE 'E'.
ENDCASE.
ENDIF.
ENDFORM. " GENERATION_SECONDARY
FORM header_secondary .
WRITE :/50 'ITEMWISE MATERIAL DOCUMENTS' COLOR 1.
WRITE :/1(192) sy-uline.
FORMAT COLOR 1.
WRITE :/1 sy-vline ,
3 'DOCUMENT NO' ,
12 sy-vline ,
14 'YEAR' ,
19 sy-vline ,
21 'ITEM NO.' ,
30 sy-vline ,
32 'MOV TYP' ,
40 sy-vline ,
42 'MOV DESCRIPTION' ,
72 sy-vline ,
74 'MATERIAL NO' ,
94 sy-vline ,
96 'MATERIAL DESCRIPTION' ,
146 sy-vline ,
148 'UOM' ,
153 sy-vline ,
155 'QUANTITY' ,
170 sy-vline ,
172 'AMOUNT' ,
192 sy-vline .
WRITE :/1(192) sy-uline.
FORMAT RESET.
ENDFORM. " HEADER_SECONDARY
*FORM user_secondary .
IF sy-ucomm EQ 'DISPLAY'. "EXECUTES ONLY IF 'DISPLAY DOCUMENTS' ITEM IS CLICKED ON APPLICATION TOOL BAR.
IF sy-lsind EQ 2.
GET CURSOR FIELD v_field VALUE v_value. "GET THE FIELD VALUE AND NAME WHERE THE CURSOR WAS CLICKED
CASE v_field.
WHEN 'I_TAB2-MBLNR'. "DISPLAYS SECONDARY LIST ONLY IF DOCUMENT NUMBER IS CLICKED
SET PARAMETER ID :
'MBN' FIELD i_tab2-mblnr ,
'MJA' FIELD i_tab2-mjahr.
CALL TRANSACTION 'MB03' AND SKIP FIRST SCREEN.
WHEN OTHERS.
MESSAGE 'SELECT DOCUMENT NUMBER' TYPE 'E'.
ENDCASE.
ENDIF.
LEAVE PROGRAM.
ENDIF.
ENDFORM. " USER_SECONDARY

For output display report is final_internal table or structure in wd ABAP?

Hi all,
for output display report is final_internal table or structure in wd ABAP?
in wd java output display report -.> CALLING rfc and that RFC OUTPUT table
finally in internal table is assigned to STRUCTURE .Same procdure?
Thanks,
RAMA

Dear Madhu,
thanks for guidence!
its showing popup tht this BADI ( ME_CHANGE_OUTTAB_CUS ) is only use for "SAP Internal use".
Regards,
Praphull

Regarding calling 1 report from another

Hello Friends,
   Can u plz tell me how to call one report from another report.
Regards,
Drashana

hi,
Use SUBMIT program statement
SUBMIT ZFIR001
chk this.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
      seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign    = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
    seltab_wa-low = pnppernr-low.
    append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
                                via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
                with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
\[removed by moderator\]
rEGARDS
Edited by: Jan Stallkamp on Jul 29, 2008 5:25 PM

Displaying Report in Web layout

Hello All,
Can anyone please tell me how to display reports in web layout during runtime. I've created a report in month_report.jsp, having both Web Layout & Paper Layouts. At runtime when I call the report the Paper Layout version is getting displayed. Is there any extra parameter I've to pass.
For Example if I give the following address
http://host-110:7778/reports/rwservlet?&report=month_report.jsp&destype=cache&desformat=htmlcss&userid=admin/test@testing&p_month=JANUARY
I get to see the Paper Layout version of the report. What I want is the Web layout. Is there any thing or any setting I've change in the Reports server. Kindly help me out on this.
Regards,
Arun.V

Thanks Frank,
No one seems to giving me a reply in the reports forums. They are hard to come by. Could you please direct me to some post which might be helpfull. I just want to know whether there's something wrong with the way I'm calling the report... May be thats the reason that I'm getting the Paper Layout as output instead of Web Layout.
Regards,
Arun.V

Spool Request Display Report

Hello,
Pleasure to be part of this community and ask the first question.
I have created a report and probably, that report is going to be scheduled to run weekly.
I want to understand how I can create a job and spool request display report for this program. I have found some information from this forum about SM36/SM37 T-Code and spool request display. However, I think I am not able to get the whole scenario of how it is going to work.
If someone can give me an idea, that would be great. Practical examples will be appreciated.
Regards,
Udit

I am assuming you will be scheduling this job manually and not programmatically.. The process is as follows..
Goto SM36
Enter a Job Name
click on START Condition butto and click Date and Time button
you will see a button PERIODIC VALUES appeared below.
Click and select WEEKLY as you have indicated, SAVE it.
Enter date and time so that it starts on that time and is scheduled everywk at that time
You can enter NO START AFTER in case you want to restrict this.
Then Click STEP
You can enter program name variant and also select Printer specification
And that should do the trick..
Hope this helps

How to display report in Acroat Reader?

Hi,
i have to display my reports in Acrobat reader. How is it possible to do it from reports? like i'm setting the Distribution property from the report's property palette but it doesn't seem to be working. Does it need any specific parameters to be set?
Best Regards,
Mehwish

Hello,
To display report in Acrobat Reader, you have to execute your reports with DESFORMAT=PDF
On the web (rwcgi60), Acrobat Reader will be called automatically when DESFORMAT=PDF and DESTYPE=CACHE
Regards

Can't display report file in pdf format correctly

I generated pdf file in report runtime, but the chinese font don't display correctly in adobe reader 5, chinese version, why?

You will have to wait for Reports 9i which will support PDF 1.3+ which includes support for multibyte characters.
Regards,
The Oracle Reports Team

Conditionally Display Report Column

hi,
i want to display report column Conditionally .
i have created a report . there are multiple column Like. BILL NO,BILL DATE, PAYMENT MODE, CHEQUE NO, CHECQUE DATE, TOTAL AMOUNT
Now i want to display only BILL NO,BILL DATE, PAYMENT MODE, TOTAL AMOUNT when i select PAYMENT MODE Cash in Select List ITEM
And
i want to display only BILL NO,BILL DATE, PAYMENT MODE, CHEQUE NO, CHEQUE DATE,TOTAL AMOUNT when i select PAYMENT MODE Cheque in Select List ITEM
How Can i Conditionally Display Report Column.
Thanks
Manoj KAushik

Hi,
try this as report query - pl/sql function returning select statement.
declare
     qry_str varchar2(1000);
begin
   if :p1_select_list = 'PAYMENT MODE' then
        qry_str := 'select BILL NO,BILL DATE, PAYMENT MODE, TOTAL AMOUNT from yourTable';
   else
       qry_str := 'BILL NO,BILL DATE, PAYMENT MODE, CHEQUE NO, CHEQUE DATE,TOTAL AMOUNT';
    end if;
     return qry_str;
end; Regards,
Shijesh

How to display Report tile html Title on generated report

Hi
Could you please give some idea to display Report tile <html Title> on generated report?
I am not using CrystalReportViewer to export my report
reportClientDocument = new ReportClientDocument();
reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
reportClientDocument.open(reportName, OpenReportOptions._openAsReadOnly);
reportClientDocument.getDatabaseController().setDataSource(
POJOList, Class.forName(CLASSNAME), TABLE_ALIAS, TABLE_ALIAS);
byteArrayInputStream = (ByteArrayInputStream) reportClientDocument
.getPrintOutputController().export(ReportExportFormat.PDF);
Currently its displaying struts action name as title.
We are using crystal reports 2008
Thank you

Try the following extract of code to set the title:
SummaryInfo newSummaryInfo = new SummaryInfo(reportClientDocument.getReportDocument().getSummaryInfo());
newSummaryInfo.setTitle("<new reportName>");
reportClientDocument.modifySummaryInfo(newSummaryInfo);
reportClientDocument.save();
reportClientDocument.close();
I hope this helps.
Regards.
- Robert

Displaying reports on our intranet

Ok, so for many years I have compiled VB projects and bundled CR into them for reporting. I'm using CR2008 and would like to display reports on an intranet web site. The site is designed with ASP.NET 2005. Can anyone give me specifics on installation requirements to get this to work?
In the design environment the reports display ok, but when on the site, there is a parsing error.

Hi Mark,
Below are the installation requirements regarding your application on the server:
- Install Crystal Report 2008 runtimes on the production server(for this you can use Merge Modules/Server Install)
Please try it and let us know.

Regarding CHNAGE DISPLAY REPORT (MM04)

Similar Messages

Maybe you are looking for