Regarding container elements
please tell me how to transfer container elements from rule container to workflow container and can we debug rule
HI,
its like normal task <---> workflow container binding only. And, yes, you can debug the rule. If you are using Rule with FM, then it's just anyother FM debugging.
1 . Rule binding is same as task binging only , we need to pass all the import parameters correctly , make sure that all neccessary parameters are passing correctly then will get exact Agent .
2. we can dubug the Rule by putting /h or
by putting Break point inside the Function module
For this we need to Go to PFAC tcode there u can put directly /H - > Debug
other wise select Function module then put Break- point Inside the Fm and Debug.
Regards,
Vijaya
Similar Messages
-
Hi All,
can anybody have a idea about say while creating a new container element by clicking CREATE button in container we have several options like
Element:
name:
short descreption:
object type :
ABAP dict reference:
structure:
field:
ABAP dict datatype:
table name:
what details i need to fill here .........(as i am trying to send alert using BPM for this i am configuring all Alert steps in RWB)
Regards,
AzeezHi chirag,
can i have ur email id so that i can explain in breif about my sceanrio and kind of errors i am looking for it would be very help full .....my email id
thanks for the reponces.
Regards,
Azeez
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from using email correspondence as the main objective of the Forums is to share knowledge.
SDN PI/XI Forum Moderator
Edited by: Kenny Scott on Mar 3, 2008 6:09 PM -
Container element is not being displayed in email
Hi Experts,
I inserted an element from container into email text as below
The task has been pending in inbox for more than &ins_num& days.
The value of &ins_num& in container is 9
In output I get
The task has been pending in inbox for more than days.
Please let me know what is wrong. The binding works fine. No error in workflow.
Thanks.Hi Miak,
Greetings..:-)
> I inserted an element from container into email text as below
> The task has been pending in inbox for more than &ins_num& days.
> The value of &ins_num& in container is 9
> In output I get
> The task has been pending in inbox for more than days.
> Please let me know what is wrong. The binding works fine. No error in workflow.
Check on the Following things:->
1> The Container Element has Initial Value defined, If Yes - it should symbolise in Green Colour.
If 'Not', then check the WF Log and see whether this Container Element is fetching the Values orr not.
2> If the Values are not being Fetched, then the Problem lies with the Binding of these WF Containers.
Let me know if you are still facing Issues.
Regards,
Kanika -
Hiding a container element from a standard applicaition
hi,
i have a requirement to remove the UI elements in a transparent container from a view of a standard webdynpro component HRRCF_C_PREFERENCES_UI. This component is being used as a sub component in a main application.
The transparent container within has a drop down list and a few buttons.
So i created a component configuration for the component HRRCF_C_PREFERENCES_UI and changed the property of the UI element in the configuration to invisible. This worked, the container element was invisible in the application. But two other containers next to the UI element that was hidden did not move to the left . No proper alignment.
Is this the standard behavior of a component configuration? i don't think so.
Now in my option, the other only possible option is to hide the button by changing the attribute in the WDDOMODIFYVIEW method of the view.
Could someone please help me how to set the attribute problematically? Is there a different way to meet this requirement?
Need some help.Thanks.
Best Regards,
SridharanHi,
Just go to enhancement mode in your webdynpro component and delete that button from UIElement hierarcy.
If you want your button back, delete the enhancement.
Regards
Vishal kapoor -
BPM - An empty container element was specified when sending
Hello Experts,
My BPM process looks as below:
Receive -> Loop (execute if the status of IDoc is ERROR(E))--> Mapping ---> End Loop --> Send
The message is failing in BPM workflow with the log: An empty container element was specified when sending
Container for receive and send stepe are different. IP in SXI_CACHE has process code 0.
Mapping program is defined between the abstarct msg type of receive step and abstract msg type of Send step.
Th message being processed has initial status as ERROR and after the mapping step is exceuted, it retrieves teh current status i.e SUCCESS. This ends the loop step and while tying to send the messgae to target system, this error occurs.
Pls advice if I am missing anything.
Thanks,
Elizabeth.Go to transaction SWWL , select your integration process instance and delete it
Create your process with a new name and run the scenario again
Re: Prob with Integration Process
regards
Ninad -
Error while creating container Element in WF
Hi,
I have created a container element with field vbeln, and specified an initial value. Created mail step and activated it. I have given the mail subject and content as "value given : &vbeln&". When I try to test this I couldn't find the container element in " Input Data" tab of the Test Data and getting the message as "Contnr elem. VBELN is for read purposes only. No values are assigned to it."
Could anyone suggest me to correct this, because I am new to WF.
Thanks,
AAHi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal -
Container Element in Alert Category
Hi,
Any one can tell me what is the use of container element in Alert Category.
While creating a container variable there is an drop down for Object type.When we go for each of these object type.
When i selected the object type as 'XML object type ' i could be able to see all the abstract interfaces and the fields that are created in the IR.I am able to select that field in the long text tab also.
But the value of the field is not getting reflected when an alert message is triggered.
Am I in a right track or doing anything wrong?Can i directly access this field in the long text?
Regards
DiviaHi Sreedivia Narath,
Go through this blog for alert configuration by Michal. Its a beautiful blog and explains about the container variables:
The specified item was not found.
Thanks and Regards,
Sanjeev. -
Container element in BPM of type integer
if i make a container element of type integer in my BPM, does it initiallize to some value
Hi Pankaj,
Check this out,
http://help.sap.com/saphelp_nw2004s/helpdata/en/78/62373f58502e48e10000000a114084/content.htm
Go to Assigning Values
<i>At runtime, you can assign a value to a container element, for example to increase a counter or to append a message to a list of messages.</i>
Also refer this
http://help.sap.com/saphelp_nw2004s/helpdata/en/59/e1283f2bbad036e10000000a114084/frameset.htm
<i>[Reward if useful]</i>
Regards,
Prateek -
BPM error:Container element in step transformation is not initialized
Hello Experts,
I am new to the concept of BPM.
I'm trying to create an integration process in which I'm taking an Idoc and processing it in many ways. The process contains many transformation steps. There two such transformation steps which have been placed in block step in a fork. And i get this error: Container element XXX in step transformation is not initialized
What could be the problem?
Regards,
AkhilHi
if u are getting the messaga with red sigh then it means it will craete the error while running the scenario.
but if it is in blue then i think it will not create any error.
the meaning of that statement is that the container u have defind is not used anywhere. it is just giving u a warning message.
Thanks
Rinku -
BPM Alert Container Elements Not Filled
Hi All,
Another problem i am facing when i am raising alert from BPM.
In inbox i see alert message being raised but with no text.
I have also subscribed to email alerts.
In the email the subject is Process 000000008058
and the content is the first alphabet of the AlertMessage container element.
Ex : In BPM my container element is AlertMessage and the message assigned is <i>Error</i> . Then in email message i only get E. where as in alert inbox i get nothing.
ps : im using XI 7.0 SP 9. there are no notes which are applicable for this release.
Regards,
Rahul
Message was edited by:
Rahul JainHi Bhavesh,
<i>>When you select Dynamic text in the Alert category, the Container tab will no longer be available in ALRTCATDEF for your Alet Category.!</i>
the container tab is available but the Long& Short text tab is disabled.
I did not mean that..
What i meant was see next to the Properties tab in Alert Category defination there is a Container tab where we define our own container elements.
Do i need to define the names there..or i can directly use in the BPM?
Regards,
Rahul
Message was edited by:
Rahul Jain -
Error while using container element _WF_PARFOREACH_INDEX in workflow
Hi All,
I am using internal container element WFPARFOREACH_INDEX in internal table so that i can use it as index to read table row one by one..but in binding i am getting error "Container element '_WF_PARFOREACH_INDEX' does not exist" in form of an example.
Can someone tell me that how to get rid of this error in binding? I am using this element variable to achieve parallel branching in workflow.
Regards,
SumitHi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal -
How to Initialize Container Element in BPM..No Payload found
Hi All,
How do we initialize a container element in BPM if that container element is a message Interface.
I am doing exception handling in BPM, so whenever a exception occurs i need to send a mail.
So in the exception box i have a transformation step and a send step.
In the transformation step what will be my source message?
How do i initialize that source message?
What i have done right now is created a dummy interface(abs) for source and then mapped with the target abs interface.
When i execute the schenario,in the monitor i find in the Transformation step the following error
<i>No payload found.</i>
Regards,
SumitHi Pinto,
I too agreee. Lemme try to explain witha example.
In my first transformation, MI_MAIL_TEMP_ABS is there along with 3 other interfaces. Each one is getting mapped i can see that in monitoring.
Now in the exception branch in transformation step,
i am mapping MI_MAIL_TEMP_ABS to MI_MAIL_ABS.
Now in the send step im giving MI_MAIL_ABS as the interface name.
Do you see anything wrong with this?
<i>>>>>>>>Did you try to do outbound interface -> inbound interface mapping in the exception branch? Just to try to make your scenario work. Then you can investigate further on why the abs message is not being carried away.</i>
Which outbound interface & inbound are you talking about?
Regards,
Sumit
Message was edited by: Sumit Khetawat -
Starnge problem while creating container elements in BPM
Hi All,
I am trying to create Container element of category Abstract Interface in BPM. While I try to give Type as the abstract interface created, it not populating the my abstract interface and says: No obects found.
Kindly, What could be the reason?
Thx
NavinHi,
You can use abstract sync inteface in the async-sync bridge (sender), using the async abstract interfaces as request and response to the sync abstract interface in the BPM sender properties configuration.
Regards,
Bill -
Extra event container element in BUS2203
HI All,
I have a standard workflow template WS10400002 which has some start condtions defined. If you check in the binding between event container --> workflow container, there is a extra element for "Gross Amount(USD)". Kindly let me know how we can have an extra element.
I copied the template to my Z template and there that extra element is not available.
Kindly check in your systems and let me know.
There is no delegation of BO done.
Thanks & Regards,
Srinivas Rao.Hi Pavan,
Thanks for the reply. I will make my question more clearer.
I dont want to do anything right noew regarding start condition set up . It is already done in the STANDARD template WS10400002. What I wish to understand is, when you will check the template in your system and check the event-> workflow binding, you will notice that there is extra container element "Gross Amount(USD)". Where did this come from ?
I hope I am clear this time..
Waiting for your reply.. -
Use Multiline Container Element in User Decision
Hi Gurus,
I have a Multiline Container in my User Decision Task. I am able to pull the data in a Standard Text to the Multi Line Container Element if type RSTXT-TXLINE. But how do I display the total data in all the lines in that element to the User Decision Workitem Text.
Thanx & regards,
KanYou cannot insert all the table entries in the Decision step workitem Text. it wont allow you to display, one of the possible ways to fix it is please check this [blog|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417500)ID1574174750DB11406479040085832269End?blog=/pub/wlg/15666]
Maybe you are looking for
-
SSO registration fails.
While registering the application in 10.1.2.0.2 OID, I get the following error. *** Log File = $INST_TOP/logs/appl/rgf/TXK/txkSetS SOReg_Thu_Apr_10_04_40_53_2008.xml Beginning input parameter validation for Oracle Home Instance registration. Input pa
-
Use of dynpro services is not possible in the current system status
Hi, I am new to all of this and new to SAP. I will bew self learing my way into CRM SOA, working with the web service creaiton i keep getting the following errlr when rtying to Activate a new created web service: "Use of dynpro services is not possi
-
Run time Error while creating Network Activity.
Getting Runtime - > Runtime error: ILLEGAL_TEMPORARY_OBJNR ("TM0000000008NV" " " " ") While trying to create the Network activity in the following sequence. CALL FUNCTION 'BAPI_PS_INITIALIZATION'. *--> Create the Network Activity CALL FUNCTION 'BA
-
Why are images not displaying at correct resolution in emails?
I've just upgraded to Windows 7 (64bit). Thunderbird is not displaying images at the correct resolution: images that I insert into the body of an email and images used in my signature. The images appear larger than they should and pixelated. It seems
-
I am currently working on an application in which I have a XML file that is 1.5 mb and has 1100 records that I need to load and parse. Loading takes less than a minute, but when I try to parse it with the DOM parser it's taking too much time. I am tr