Error while creating container Element in WF

Hi,
I have created a container element with field vbeln, and specified an initial value. Created mail step and activated it.  I have given the mail subject and content  as "value given : &vbeln&".  When I try to test this I couldn't find the container element in " Input Data" tab  of the Test Data and getting the message as "Contnr elem. VBELN  is for read purposes only. No values are assigned to it." 
Could anyone suggest me to correct this, because I am new to WF.
Thanks,
AA

Hi AA,
You would probably need to create more than one containers.
In workflows, we have following types of containers:
1. Workflow container
2. Task Container
3. Event Container
Now, since you need the element VBELN, try the following:
1. Create a WF container for VBELN. Make it as both input and output parameter.
2. Create a container for the Mail Step, again with VBELN field as an input parameter.
3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
Once binding is done, save it and Activate the Workflow.
Hope this helps.
Do get back in case of any issues.
Regards,
Sonal

Similar Messages

  • Error while accessing container element _ALERT_LOGICAL_SYSTEM

    Hi,
    Getting below error in SLG1 T.Code, I, am getting E-Mail but without any ALERT ID, MESSAGE ID and Interface name pls suggest for the same to solve.
    "Error while accessing container element ALERTLOGICAL_SYSTEM" ERROR IN SLG1
    Rgds,
    MFH

    Did you checked this thread: Alerts problem and log
    Regards,
    Abhishek.

  • Error while creating WBS element.. regarding source structure

    I am creating a project and then a WBS element. Its a investment project. While creating WBS element XXX, it gives me error that "WBS element XXX: SOurce assignments for source structure A1 missing in Investment Profile ZZZZZ."
    What shall I check? what could be the reason?
    Thanks,
    A

    hi,
    In this IMG activity, you define the source structures used when settling and costing joint products.
    A source structure contains several source assignments, each of which contains the individual cost elements or cost element intervals to be settled using the same distribution rules
    Just consult with your CO Consultant...
    Venkatesh

  • Starnge problem while creating container elements in BPM

    Hi All,
    I am trying to create Container element of category Abstract Interface in BPM. While I try to give Type as the abstract interface created, it not populating the my   abstract interface and says: No obects found.
    Kindly, What could be the reason?
    Thx
    Navin

    Hi,
    You can use abstract sync inteface in the async-sync bridge (sender), using the async abstract interfaces as request and response to the sync abstract interface in the BPM sender properties configuration.
    Regards,
    Bill

  • Error while using container element _WF_PARFOREACH_INDEX in workflow

    Hi All,
    I am using internal container element WFPARFOREACH_INDEX in internal table so that i can use it as index to read table row one by one..but in binding i am getting error "Container element '_WF_PARFOREACH_INDEX' does not exist" in form of an example.
    Can someone tell me that how to get rid of this error in binding? I am using this element variable to achieve parallel branching in workflow.
    Regards,
    Sumit

    Hi AA,
    You would probably need to create more than one containers.
    In workflows, we have following types of containers:
    1. Workflow container
    2. Task Container
    3. Event Container
    Now, since you need the element VBELN, try the following:
    1. Create a WF container for VBELN. Make it as both input and output parameter.
    2. Create a container for the Mail Step, again with VBELN field as an input parameter.
    3. There would be a button for binding in the mailstep. Bind the Field VBELN from Work flow container to the Mail Step container.
    Once binding is done, save it and Activate the Workflow.
    Hope this helps.
    Do get back in case of any issues.
    Regards,
    Sonal

  • Error while Creating WBS element using BAPI 'BAPI_BUS2054_CREATE_MULTI'

    Hi Expert,
    I've a requirement to create WBS elements using BAPI. And I am using BAPIs in the following manner.
    CALL FUNCTION 'BAPI_PS_INITIALIZATION'
      CALL FUNCTION 'BAPI_BUS2054_CREATE_MULTI'
        EXPORTING
          i_project_definition = g_pdwbs
      TABLES
        it_wbs_element             = it_wbs_element
       et_return                  = it_return
      EXTENSIONIN                =
      EXTENSIONOUT               =
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    When I do so I am getting the below errors. Please suggest.
    "Individual check for creating the object WBS Element C-497082 required ".
    "Individual check for creating the object WBS Element C-497082-0001 required".
    Please suggest how to correct this error. 
    <REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
    Edited by: Alvaro Tejada Galindo on Aug 18, 2008 5:25 PM

    I am getting the same error, but I cannot figure it out how to detect it and fix it.  Will you please share your solution?
    Thanks,

  • Error while Creating cost element under category 90

    Dear Experts,
    I have some Balance Sheet related G/L account, which I have created as cost element through transaction KA01, system gives an info message saying its an BS related account, if I ignore that message and proceed further it creates a Cost element with category (system automatically picks the category and the field gets into gray mode) 90.
    We have created one more BS G/L account today and trying to create the cost element for the new G/L account, system is producing an error message:
    G/L account 3200220 is a balance sheet account
    Message no. KS036
    Field status group     R005     Material accounts is maintained
    Can some one guide me to rectify this error?
    Thanks in advance,
    Regards,
    Praveen

    Hi,
    The use of cost element category 90 is only provided                            
    in the following two cases (note Note 75980):                                                                               
    1. asset acquisitions and down payments which are                           
       assigned directly to a fixed asset or asset under construction can       
       be assigned to an account on internal orders or WBS elements             
       statistically.                                                                               
    2. cost elements of category 90 can also be created                         
       for material stock accounts to display material make-to-order stocks     
       on sales orders or customer projects.                                                                               
    If you G/L account does NOT correspond to the standard cases 1) or 2),      
    you can (on your own responsibility)                                        
    both deactivate the account assignment                                      
    check in the CO interface (message KI098) and when you create cost          
    elements (message KS036). Both checks are deactivated by maintaining        
    Transaction OBA5. Deactivate message KI098. Message KS036 cannot be         
    deactivated directly with Transaction OBA5 - rather, it is deactivated      
    indirectly when you deactivate message KI098.                               
    The message must be DE-ACTIVATED. Please do not set it to any other         
    type. Please proceed as follows:                                            
    Please call OBA5 in the production system - if not set to changeable        
    please do this in Your development system.                                  
    In OBA5 choose KI and in the detail screen add 098. 
    Then set the type of warning to "-".  
    Best regards,
    MLM

  • BAPI_BUS2054_CREATE_MULTI error while creating WBS Element

    Hi Gurus,
    I am trying to create WBS element by using    BAPI_BUS2054_CREATE_MULTI
    but bapi raise an error that I can not understand.
    in return table I got the following error with the error code CJ - 021
    " XXXX-YYYY-ZZZZ WBS Element does not exist "
    But I try to create already? What does 'Does not exist' mean?
    By the way I am using
    CALL FUNCTION 'BAPI_PS_INITIALIZATION'. before using  BAPI_BUS2054_CREATE_MULTI
    thanks in advance, it is an very important
    Mehmet Ali

    Hi.
    I have the same problem. Have you solved?
    Thanks.
    Angie

  • Getting error while creating the variable of Schema Element type

    Hi everybody,
    For creating a variable of schema element type I am doing the following steps...
    Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
    IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
    What is mean by that.
    I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
    Thanks.

    Hi,
    I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
    [http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
    The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
    Regards,
    Nacho

  • Error while creating/changing/desplay cost element

    Gents
    Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
    Table CI_CSKB is not an active table
    Message no. AD 228
    Kindly help me to get the resolve this issue.
    Thanks and Regards
    Vinay Thakre

    hi
    In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
    Thanks
    plz award points if helpful.

  • Error while creating a Development plan template

    Hi Gurus,
    I am facing errors  while creating Development Plan Template.
    This is how it goes :
    When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
    In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
    Now after clicking next, I am adding 2 development areas :
    1) Training
    2) Mentoring,
    now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
    error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
    error2 : Value type 000000XXX of value class Q does not exists
    Warning 1 : You have maintained a description that is not displayed.
    In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
    Kindly let me know how to proceed further.
    Regards
    bharti

    Hi,
    Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
    But when I run the Concurent program and see the output,the output still shows me the old template.
    Regards
    Jujaar

  • Error While Creating TS in SLD Manually

    Hi Experts,
    I Got the Following Error While Creating TS as Web AS ABAP For R/3 System
    500   Internal Server Error
      Web Dynpro Container/SAP J2EE Engine/6.40 
    Failed to process request. Please contact your system administrator.
    [Hide]
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.IllegalArgumentException: The node, node element, and attribute info MUST NOT be null
        at com.sap.tc.webdynpro.progmodel.controller.MessageManager.reportContextAttributeMessage(MessageManager.java:940)
        at com.sap.sld.wd.technicalsystem.NewABAPSystem2.onActionNext(NewABAPSystem2.java:369)
        at com.sap.sld.wd.technicalsystem.wdp.InternalNewABAPSystem2.wdInvokeEventHandler(InternalNewABAPSystem2.java:344)
        at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
        at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
        ... 27 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727)
    Version null
    DOM version null
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0006.20060302084208.0000 (release=NW04S_06_REL, buildtime=2006-03-04:17:33:21[UTC], changelist=10570, host=pwdfm114), build date: Fri May 18 20:03:14 IST 2007
    J2EE Engine 7.00 patchlevel
    Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
    Operating system Windows 2003, version: 5.2, architecture: x86
    Session & Other
    Session Locale en
    Time of Failure Wed Jun 13 12:17:00 IST 2007 (Java Time: 1181717220451)
    Web Dynpro Code Generation Infos
    sap.com/tcsldwd~main
    SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:18[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:25[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:06[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:22:50[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:15:16[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:19:38[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:23:00[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    sap.com/tcsldwd~landscape
    SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:18[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:25[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:06[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:22:50[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:15:16[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:19:38[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:23:00[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/tcsldwd~businesssystem
    SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:18[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:25[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:06[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:22:50[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:15:16[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:19:38[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:23:00[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    sap.com/tcsldwd~technicalsystem
    SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:18[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:25[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:06[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:22:50[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:15:16[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:19:38[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:23:00[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    sap.com/tcwdcorecomp
    No information available null
    sap.com/tcsldwd~softwarecatalog
    SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:18[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:25[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:06[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:22:50[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:15:16[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:19:38[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:23:00[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    sap.com/tcsldwd~namereservation
    SapDictionaryGenerationCore 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:18[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0006.20051128142640.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:17:25[UTC], changelist=378068, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0006.20050713144242.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:06[UTC], changelist=357697, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:22:50[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:45[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0006.20050929162929.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:07:38[UTC], changelist=369752, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0006.20051128142655.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:15:16[UTC], changelist=378069, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0006.20051128151854.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:19:38[UTC], changelist=378109, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    SapWebDynproGenerationCore 7.0006.20051128151834.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:23:00[UTC], changelist=378108, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0006.20060118164839.0000 (release=645_VAL_REL, buildtime=2006-01-18:19:44:56[UTC], changelist=385420, host=pwdfm101)
    Detailed Error Information
    Detailed Exception Chain
    java.lang.IllegalArgumentException: The node, node element, and attribute info MUST NOT be null
         at com.sap.tc.webdynpro.progmodel.controller.MessageManager.reportContextAttributeMessage(MessageManager.java:940)
         at com.sap.sld.wd.technicalsystem.NewABAPSystem2.onActionNext(NewABAPSystem2.java:369)
         at com.sap.sld.wd.technicalsystem.wdp.InternalNewABAPSystem2.wdInvokeEventHandler(InternalNewABAPSystem2.java:344)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:422)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:133)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Can Any Body Please Answer to This Thread. So that I Can Able to go-a- head
    Regards
    Khanna

    Hi Vijaya,
    Here We Are Using PI7.0.
    Opened SLD Page.
    Clicked on TS ->>>New TS>>Slect Web AS ABAP.
    Entered<b> Web AS ABAP Name (SID),,Installation Number,,Database Host Name</b>
    Click on Next.
    Entered <b>Message Server Port (sapmsIDE),,,Instance Number</b>
    Click on Next. Here The Above Mentioned Error Came With Pop-up Window.
    Please Help Me
    Regards
    Khanna

  • ABAP dump Error while creating service order in PCUI.

    Hi Experts,
                     We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
    Runtime Errors         RAISE_EXCEPTION
    Date and Time          02.01.2008 14:55:38
    Short text
    Exception condition "TYPE_NOT_FOUND" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
    exception
    condition "TYPE_NOT_FOUND".
    Since the exception was not intercepted by a superior
    program, processing was terminated.
    Short description of exception condition:
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    |    function module from the display of active calls.     
    We have added custom fields in the service application. these custom fields with Z-structure & data elements  are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
    This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
    How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
    Helpful answers would be rewrded max points as it is high priority issue.
    Regards,
    Basavaraj Patil

    Hi Thirumala,
    Thnaks for the reply.
                I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields)  created while doing  EEWB is not included in BSP structure.
    I f transports are missed to move to target system, Is there any other alternative to solve this problem?
    Regards,
    Basavaraj Patil

  • Error while creating a PO

    Hi all,
    I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
    User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
    Can somebody plss help me in this regards, I will assign points.
    Thank you,
    Sony

    What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
    When you see a message  transction  requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
    For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be  check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

  • Error while creating a task for creating an generic task  /app/dac/CustomSQ

    Hi ,
    I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
    In DAC task tab i have created a task with the following:
    Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
    Primary source :flatfileconnection
    target source:DBCONNECTION_OLAP
    Execution type:SQL FILE
    Task phase:GENERAL
    I created subject area and assembled ,then created a Execution plan.
    When i try to execute this EP ,it shows the following error in DAC log:
    ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
    MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
    EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
    com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
    com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
    Does my above configuration is correct ..?

    verify the following settings:
    1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
    2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Maybe you are looking for

  • Switching off wlan scanning permently on a nokia 5...

    Can you switch off wlan scanning off permently. i usually disconnect it at the wlan wizard,but after a couple of minutes it has switched its self back on.If this is not possible can you delete your email from the phone as it is driving me crazy getti

  • How do I deleat an update for Garage Band that I don't want?

    I have received notification of an update for Garage Band, a program that I will never use. How do I deleat this notification of the update?

  • Xsl:output not yet implemented??

    Is the xsl:output tag implemented in oracle xslt? I've tryed this in an xsl file: <xsl:output method="xml" encoding="ISO-8859-1" omit-xml-declaration="no" doctype-system="Segnatura.dtd" indent="yes" /> With another xslt processor produces this header

  • MENU NOT FOUND [ 66000-27] in Manage Crystal Report

    Hi All, I had installed crystal report add-on in my SAP Business One System but when I am going to Adminstration > Crystal Report Administration > Manage Crystal Report, I am getting the following error as - MENU NOT FOUND 66000-27. Please note that

  • Enhancement to summarize FI entries when posting invoice

    Is there a way we can summarize line item totals (have one debit for 100 service lines) when posting invoices via enhancement based on a characteristic, such as cost center? I can maintain summarization via OBCY, but this is not an option.