Regarding Converting the Decimal number into rounded value...

Hi,
i have a decimal number as " 58240990.00 " , i wanted this to rounded value .
for example I am expecting to see 58241 for the above number.
shell we can do in any way.. if so please let me knw fast.. it is urgent..
thanks in advance.
thanks,
Suresh..

Dear Suresh,
Go through the following code chunk:
DATA : p TYPE p DECIMALS 2 VALUE '2.49'.
DATA i TYPE i.
i = CEIL( p ).
WRITE : i.
Regards,
Abir
Don't forget to award Points *

Similar Messages

How to convert the text field into currency field

Hi,
I have an requirement to converting the text field into currency.
If I convert directly it gives dump.
If I convert this to Numeric means it takes the decimals also as whole value.
Is there any FM to convert the text field into Currency field.
Please advice me.
Thanks in advance.

Hi,
I am on an SRM sytem, which unfortunately does not have th FM: PSSV_TEXT_INTO_FIELD_CURRENCY.
But I also need to transfer a string value like '12,99' to a field with type curr.
Can i Do that manually, or is there another FM?
I have already checked code with write to or pack/unpack.
But without success yet.
Something like this:
DATA: g_str(11) type c.
DATA: g_p type p.
WRITE '12,99' TO g_str CURRENCY 'EUR'.
is no use for me. Finally I need to move g_str to my curr-field, which causes st22.
also: PACK g_str to <curr-field or g_p> dumps.
Help appreciated.
regards, matthias

Converting the WAD applications into PDF format

Hi SAPians,
I'm in need to convert WAD results into PDF Format using SAP BW 3.5 and Acrobat Reader 7.0. And I've referred some documents in Net, But,they gave ideas only for 3.5 and Acorobat 5 version.
But i've to convert the WAD results into PDF format only by using Acrobat Reader 7.0. So, kindly let me know the steps to do so.
Thanks in Advance.
Jayaprakash J

Hi Shahid syed,
Thanks for your reply.
It was very useful.
But, i've askd the solution for sap bw 3.5 with Acrobat reader 7.0.
So, plz let me knw if any solutions for that to make wad reports into pdf format.
Points will be awarded.
Thanks & Regards
Jayaprakash J

Convert the oracle10g database into standby ( read only mode)

One month ago, converted the oracle 10g standby database into read and write mode( database is open). I would like to convert the oracle10g database into standby
Please provide me the steps or document
Thanks in advance

user8680248 wrote:
two months ago we have convert the standyby database into standard database ( read, write)
NoW I am plannning to convert this database into standby database
any link or steps pleaseDid you meant you would creating(or you have) another standby database and make that standby database as primary and this as standby
If this is not what you meant then there is no way you can make this as sandby database.
Regards
Anurag

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

Why can't I open the filter gallery in Photoshop CC 2014? I've converted the photo layer into a smart object, but the filter gallery selection is still grayed out.

Why can't I open the filter gallery in Photoshop CC 2014? I've converted the photo layer into a smart object, but the filter gallery selection is still grayed out. How do I make it active?

Please go to Help, System Info and Copy then paste here.
Benjamin

I just bought a refurbished Ipod 3rd generation 8 gigs, but when I enter the serial number into Apple's site, it shows up as a 2nd generation. Is this normal?

I bought a refurbished Ipod touch, 3rd gen(link: http://store.apple.com/ca/product/FC086LL/A?mco=MjI4NjY2MTE)
The home button broke on me, so while setting up servicing for it, when I entered the serial number into the Apple site, my supposedly "3rd gen" Ipod showed up as a 2nd gen. Is this normal? And if not, what can I do about it?

There are no 3rd gen 8GB models. They did not make them.
Identifying iPod models

Converting the DATE(yyyymmdd) into MONTH(yyyymm) format

HAI
I have one date InfoObject(ZDATE) in the format of YYYYMMDD format.
My client wants another 'Month InfoObject(ZMONTH) in the format of YYYYMM . This ZMONTH infoobject should be derived from ZDATE.
So please tell me how can i convert the ZDATE data into ZMONTH format.
I think , it is possible by writing the ABAP code.
Please give the ABAP CODE for converting the ZDATE data into ZMONTH format also .
i wll assing the points
bye
rizwan

Hi Rizwan,
You can use offset like:
zmonth = zdate+0(6)
Zmonth is variable in which yyyymm is going to be stored
and zdate is variable in which yyyymmdd is stored.
I think this will slove your issue.
Thanks=points

I have a 27" iMac with a broken hard drive. Is there a way to convert the existing hardware into a display monitor without too much technical work?

I have a 27" iMac with a broken hard drive. Is there a way to convert the existing hardware into a display monitor without too much technical work?

You don't state what iMac it is or what you want to use it for an external display with so we cannot answer the question. But without a bootable drive, no you cannot. However you can get the internal HD replaced or you can connect an external HD and boot from it. Without some basics about the computer it's impossible question to answer. However you may find what need in Apple's Target Display Mode: Frequently Asked Questions (FAQ)

Directly convert the analog signals into digital without passing through FPGA

To whom it may concern,
I am using a SCB-68 board R-series and I have a couple of technical questions:
In my system at the moment 8 analog channels are connected to the 8 input analog ports and then data are sent to a FPGA (PXI system 7852R). I am planning now to add other 4 channels to the system. Since over the total 12 channels I just need a very fast acquisition mode (using the FPGA) for 6 of them, while the other 6 can be sampled in a ms scale, I was wondering if you can suggest me something that I can use to directly convert the analog signals into digital and in this way used many unused digital signals provided with this model.
Thanks in advance.

yes it is correct, what do you need is:
software + (pc) + PXI + cable + chassis + C-series module
With embedded controllers, there’s no need for an external PC
With PXI remote control kits, you can control PXI systems directly from desktops, laptops, or server computers.
What Is PXI?
To configure a complete PXI System please go to: Build Your PXI System

How to convert the exponential data into number

Hi,
I have a table with a column which is a vaarchar2(60). I have a CSV file in which, I have stored value as 77052512125510000, but it got converted into 7.71E16. And when I have stored the same in the database, it got saved as 7.71E16. How can I get the original value
Please help
Regards
Edited by: Sarma12 on May 25, 2012 3:11 AM

Sarma12 wrote:
The issue is, the data is already copied into the database. Now while retrieving from the database, I am getting that value in the scientific notation and not similar to the data which I have in the CSV file.
RegardsYou need to be smarter than the tools you use
bcm@bcm-laptop:~$ sqlplus user1/user1
SQL*Plus: Release 11.2.0.1.0 Production on Fri May 25 09:50:02 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
09:50:03 SQL> @test
09:50:07 SQL> drop table test;
Table dropped.
09:50:09 SQL> create table test (id number);
Table created.
09:50:10 SQL> insert into test values (77052512125510000);
1 row created.
09:50:10 SQL> select * from test;
     ID
7.7053E+16
09:50:10 SQL> column id format 999999999999999999999
09:50:10 SQL> select * from test;
              ID
     77052512125510000
09:50:10 SQL>
09:50:10 SQL>

How can I convert (or switch) the RGB percent values from the LR histogram into RGB values which are shown e. g. in PS/CameraRAW?

In LR 5.5 (same in previous versions) the RGB values in the histogram are shown in percent (relativ) values. I prefere to see the absolute values, but I can`t find any way to switch. Maybe this option is intentional disabled, because LR works in 16-Bit mode this would result in values up to 2^16. But as i compared the relativ values from LR with the absolute values from PS i run into a conversion problem. The following example shows the differences:
CameraRAW : RGB, 128,0,0
Lightroom: RGB, 43,8%, 19,0%, 6,2%
CameraRAW: RGB, 0,128,0
Lightroom: RGB, 29,8%, 47,5%, 17,5%
Mainly i have two questions:
1. Is there any possibility to change the percent RGB values in LR to absolut values?
2. How can i convert CameraRAW values to LR values (see above)?

TThe reason that a design decision was made from the beginning of LR to show only the percentage values was that RGB values are dependent on the color space and the LR histogram and numerical readout are derived from the Develop module's display space which is a hybrid color space with ProPhoto RGB primaries and the sRGB TRC. Thus the numerical values in the display would be different from the exported RGB image (in an orthodox space) and it was feared that this would be misleading. When soft proofing was introduced, because it involved converting the display to an orthodox space, it became possible to use the 0-255 scale in that mode.

Converting to decimal number

Hi to all,
I am diplaying data from the DataControl on a page, these data is numbers and are shown as:
number1: 12.154
number2: 125.25
number3: 1.254
as seen with a decimal point, are not aligned and with more than two decimal numbers.
How can I make show like this?
number1: 12,15
number2: 125,25
number3: 1,25
numbers with decimal comma, aligned and only two decimal numbers. I saw that this is possible using UI Hints,but I can not get it, someone can help me?

krd12 wrote:
I am trying to convert a string with a lot of digits (ex 324.41897635) into a number and want to get back the same precision in the number as in the string. I tried the "Decimal String to Number" (get back no digits after decimal point ex 324) and "Frac/Exp String to Number" (get back three decimal places rounded ex 324.419)
Not a trivial exercise!
Here is 1 possible solution I've limited it to non-trivial digits (ext floats are only 15 digits precise on some OS's.) But you can see the steps necessary. I assume the radix symbol is "." but the vi could be modified to use"System Decimal Seperator"
Jeff
Attachments:
Max Str-Ext.vi ‏11 KB

How to convert fractional decimal number to hex number?

Hi,
Can any one help me to convert the fractional decimal number to its equivalent hex number and vice versa ?
if u have any code please share.
thanks
neethu

neethukk wrote:
Can any one help me to convert the fractional decimal number to its equivalent hex number and vice versa ?
if u have any code please share.
This question is not clear at all.
"Fractional decimal" is not a data type, but a way of formatting in readable form using numeric characters and a decimal separator.
Same to "hex number", but only for integers.
What do you mean by "convert"? Do you want to keep the value the same or retain the bit pattern of the numeric data type?
Hexadecimal is for integers. Are you talking about fixed point?
We clearly need significantly more information. What are the input and output data types? What are you actually trying to do?
Do you have an example input and corresponding output?
LabVIEW Champion . Do more with less code and in less time .

Converting the category axis to a value axis

Is it possible to convert the category (x) axis to a value axis?
I have a set of measurements (18 total) spaced over 116 days.
I know how to "force it" by constructing "categories" for the numbers 1 thru 116.
But, that can be clumsy and time-consuming to setup.
Thanks, Bob

Hi Bob,
The only chart type in Numbers with two value axes is the Scatter chart.
Category charts pick up their category axis labels from a Header column.
Scatter charts require that the values for each data point be paired in two regular (ie. non-header) columns.
So, to do the converson you'll have to:
move (or copy) the dates (which must be actual Date and Time values) into a body column.
move (or copy) the measurement values into a column to the right of the dates
Select those two columns of data
construct the scatter chart.
Regards,
Barry

Regarding Converting the Decimal number into rounded value...

Similar Messages

Maybe you are looking for