Regarding data integrity for XI file/jdbc adapter

I have several questions about XI data integrity for file/jdbc adapter.
Question 1 is: if the destinate file or DB is not reachable or other technical problems occur, do I have to send the message again or not?
Usually we design an bpm to comfirm whether the database or file is completed according to a response message. But it's a little complicated.
Question 2:when I use jdbc send adapter and configure select and update SQL clauses. Does XI only update the records which it select automatically? or Select and Update don;t have any relationship?
Very appreciated if you have any experience to share me.
Regards
Shen Peng

Hi
Question 1 is: if the destinate file or DB is not reachable or other technical problems occur, do I have to send the message again or not?
If the DB is not reachable then message will be found in the inbound side. you can found them in the adapter. Goto RWB -> Message monitoring -> select status System error and search . there you will find your messages. select you message and resend them
Question 2:when I use jdbc send adapter and configure select and update SQL clauses. Does XI only update the records which it select automatically? or Select and Update don;t have any relationship?
XI never does updation automatically, Update is done only based on the SQL update query which you have written in the sender channel.
SELECT statement is used just to pick the values from the table and based upon the query which you want to UPDATE in SQL . data is updated
Regards,
sandeep

Similar Messages

"Message Rejection Handler" for the file/ftp adapter using fault policy

Hi guys,
We are trying to implement "Message Rejection Handler" for the file/ftp adapter using following fault policy configuration.
Fault Policy:
`````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1" id="ProcessNameGenericPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="ProcessNameHumanInterventionPolicy"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults"
name="medns:mediatorFault">
<condition>
<test>contains($fault.mediatorErrorCode, "TYPE_TRANSIENT")</test>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:remoteFault">
<condition>
<action ref="ora-retry-with-intervention"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
name="bpelx:bindingFault">
<condition>
<action ref="ora-rethrow-fault"/>

</condition>
</faultName>
</Conditions>
<Actions>
<Action id="ora-retry-with-intervention">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-human-intervention"/>
</retry>
</Action>
<Action id="ora-retry">
<retry>
<retryCount>3</retryCount>
<retryInterval>1</retryInterval>
<retryFailureAction ref="ora-rethrow-fault"/>
</retry>
</Action>
<Action id="ora-rethrow-fault">
<rethrowFault/>
</Action>
<Action id="ora-human-intervention">
<humanIntervention/>
</Action>
<Action id="ora-terminate">
<abort/>
</Action>
</Actions>
</faultPolicy>
<faultPolicy version="2.0.1" id="RejectedMessages">
<Conditions> 
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:PartnerLinkName">

<condition>
<action ref="writeToFile"/> 
</condition>
</faultName>
</Conditions>
<Actions> 
<Action id="writeToFile">
<fileAction>
<location>Server/Loc/path</location>
<fileName>Rejected_AJBFile_%ID%_%TIMESTAMP%.xml</fileName>
</fileAction>
</Action>
</Actions>
</faultPolicy>
</faultPolicies>
Fault Binding:
``````````````
<?xml version='1.0' encoding='UTF-8'?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="ProcessNameGenericPolicy"/>
<service faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</service>
<reference faultPolicy="RejectedMessages">
<name>PartnerLinkName</name>
</reference>
</faultPolicyBindings>
We have SyncFileRead partner link.
The expectation is: when the message read by SyncFileRead partner link is rejected,
that rejected message should come to particular directory in the server.
Could you please help us fixing this.
TIA.

HI..
Have a look at this blog :
3) Error: HTTP_RESP_STATUS_CODE_NOT_OK 401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Http* Errors in XI
Thanks,
Pooja

How do you fix error message "data rate for this file is too high for DVD. You must replace this file with one of a lower data rate".

When trying to burn a DVD it will go through the encoding step and at 98% we see the message 'data rate for this file is too high for DVD. You must replace this file with one of a lower data rate". We need help to correct this so we can complete burning to DVD.

What did you export from Premiere?
Did you use the MPEG2-DVD preset... and did you make any changes to the preset?
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

How to determine the creation date/time for a file?

The important operating systems maintain both a creation date/time and last modified date/time for files. But in the File class there is only a lastModified() method. How does one determine the creation date/time for a file?

As far as i know, there is no way to know creation time, since it is a OS dependant information.

Oracle OWB integrator for Flat Files 3.0

Hi,
I have installed owb 11g r2 in my machine, but while creating flat files module for file import it is showing that
it does not find *"Oracle OWB integrator for Flat Files 3.0"*. so i cannot use "import metadata using flat file wizard".
do i need to install the owb again or the Oracle OWB integrator for Flat Files 3.0 alone..or how do i integrate it with owb....... please help if anyone can,,
Thanks..

Here is the certification matrix
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0CFEQFjAE&url=http%3A%2F%2Fwww.oracle.com%2Ftechnetwork%2Fmiddleware%2Fdata-integration%2Fodi-11gr1certmatrix-ps6-1928216.xls&ei=mtmUUcX7DoiJrQek04DwAg&usg=AFQjCNGoOUFQHdK7Ti2DLb6vz_3s-miP3A&sig2=q3rf2foe9bl4_WbsLPwWng&bvm=bv.46471029,d.bmk

OS X lion changes "Date Created" for old files that I edit or update.

Whenever i edit my old photos and save the changes, Finder changes the "Date Created" for that file to the date of the last edit.
This is annoying as i used finder and date created to search through my old images. Is there any way to get it back to functioning like the previous system ?

StoneComputers wrote:
What about the incredable lag time from clicking on a program to the time it opens (or the time till the loading screen starts)? I wish I could record it and play it so I could see if thats normal from other members... the icon just sitting there for over 35 second (I just counted 36 till the loading screen popped up) at first I thought it was me not clicking hard enought cuz the mouse button I have is real stiff (any ideas on that?) but no it takes that long just to get to the app loading screen... this happens every time same amount of time with the 3 programs I use the most, prolly more but I know for a fact world of warcraft, uTorrent, and Google Chrome. I would just chalk it up to slow hardware but they load real quick in windows 7 and once this bad spot is loaded the program runs so fast and nice afterword. Maybe some tweeks? I wonder if this would happen in Snow?
The coment "few outdated programs" Ive seen alot its not just a few its a lot and since games are not Apple's strong point I would think they would want to keep as many as they could...
An example of the rants you will see from a lot here. Don't be put off as these problems are generally user specific, and these same old comments come out after the release of every OSX I can remember. When Lion is upgraded to the next OSX you can gaurentee these forums will be full of people screaming about how great Lion was. Happened with Tiger, Leopard and Snow Leopard.
So come to think of it you may be better off Googling sites that give you unbiased views on Lion, rather than expect any positive comments here. For every one complaint there are probably 100,000 people with no issues.
Cheers

System trace for File, JDBC adapter

In the JDBC Adapter Help (help.com) I see:
The adapter writes the output (STDOUT and STDERR) for the operating system command in the system trace.
Which trace is meant here?
I have the same question regarding File Adapter.
Thanks, Jozsef

Hi,
have a look at my weblog to see how you can check
the traces:
/people/michal.krawczyk2/blog/2005/08/17/xi-operation-system-command--error-catching
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to give a dynamic File Name for Receiver File/FTP Adapter.

Hi Experts,
    I have one scenario in which we are creating a flat file of IDOC which is coming from R/3 & sending it to FTP location. For this we have configured Receiver FTP adapter with File Name Scheme as "NT.out" & in File Consturction mode i have given as "Add Time Stamp".
    therfore while creating a file it is creating as NTyyyyMMdd-HHmmss-SSS.out
where as my requirement is only to to add Time & not the Date. (NThhmmss.out)
    How to do this ?
    for your info we are using ABAP Mapping.
    Pl help me
Regards,
Umesh

Hi Umesh,
      Add one more field to your target structure for your file name and populate that field as per your requirement like NTyyyyMMdd.out. In receiver communication channel use Variable subtiution option and give the refrence of Payload and file construction mode set as create.
And refer the below weblogs for Variable Subtiutuion File Name Scheme
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
Hope this way would be solve u r problem.
Cheers
Veera
>>>Reward points, if it is needful

Unable to create a data server for xml file

Hi ,
I have created a data server for a xml file but when i test the connection i am getting the below error.
java.sql.SQLException: class org.xml.sax.SAXException
Prefix not found: xsi
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
at java.awt.Component.processMouseEvent(Component.java:6263)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Can any one help me out with this issue ?
Thanks in advance,
Balajitk

HI Balaji,
Below is the sample xml file which i have saved as test.xml and placed it @ D: drive
Test.xml:
<employee>
<emp>
<eno>1</eno>
<ename>Test1</ename>
</emp>
<emp>
<eno>2</eno>
<ename>Test2</ename>
</emp>
<emp>
<eno>2</eno>
<ename>Test2</ename>
</emp>
</employee>
Goto Topology >Expand Technologues>right click on XML and select new data source
in Defination Tab, provide the physical architecture name
in JDBC Tab, provide the below details
JDBC Driver: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
JDBC URL: jdbc:snps:xml?f=d:\test.xml&d=test.dtd&re=employee&s=TEST&ro=false
Save it
Click on Test Connection and again click on test, it should show test connection as "Successfully Test"
Hope this may helps you
Regards,
Phanikanth

Help! Check data in MS Excel file(JDBC-ODBC)

Hi guys,
I wrote a program that can check data in MS Excel file.
User can input a sentence like "1->2" ,"1->3" (one determine one), then the program can find the data which violate the integrity constrains(functional dependency).For example, if we have the functional dependency "TSeq_gi->TSeq_accver", the program looks for two or more tuples with the same "TSeq_gi" value but the different "TSeq_accver" value in Excel file. These tuples violate the integrity constraint. But now,I can't figure out how to modify this program to multiple determine one. (like 1 3->5 or 1 3 4 5->7) . 1 3 ->5 means: look for 1 and 3 have same value but 5 different. I get stuck. Can some experts help me?
The code and Excel file are in below link. Download and play it! Thank you~~
Karen.
http://us.f1f.yahoofs.com/bc/665bbb4/bc/Java/code.zip?bf6cljAB_wgRYVQf
PS: You need to set up JDBC ODBC driver in MS windows "Administrative Tools" first. Data Souce name is Test .
Main logic class:
class MyActionListener implements ActionListener{
public void actionPerformed(ActionEvent e){
if (e.getActionCommand()=="SEARCH")
     try{
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     con1= DriverManager.getConnection("jdbc:odbc:Test");
     stmt2= con1.createStatement();
input1 = new String(pathTf.getText());
     main_loop: while(true){
if (input1.equals("0")){
          // break out of while(1)
          break main_loop;
     st= new StringTokenizer(input1," ,-=>");
          while(st.hasMoreTokens()){
               // analyze the input stream.
               // Attention, the program didn't do the input value check.
               input1= st.nextToken();
               input2= st.nextToken();
          query= "select "+ schema[Integer.parseInt(input1)-1]+ ","+ schema[Integer.parseInt(input2)-1]+ " from [Sheet1$]";
          rs2= stmt2.executeQuery(query);
          rowCounter= 0;
          list1.clear();
          list2.clear();
          list3.clear();
          while(rs2.next()){
               // increase the row counter
               rowCounter++;
               // initial the flag
               col1= rs2.getString(1);
               col2= rs2.getString(2);
               // for the initalization
               if (list1.isEmpty()){
               list1.addElement(col1);
               list2.addElement(col2);
               row="Row 2";
               list3.addElement(row);
               // compare weather exist dependance
               else
               for (int i=0;i<list1.size();i++){
                    // if col1 match with the first part of value in the list
                    if (((String)list1.get(i)).equals(col1)){
                         // The independence pair match
                         if (((String)list2.get(i)).equals(col2)){
                              break;
                         else
                              textArea.append("\n"+"Violate Integrity Constraints Found : "+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
                              System.out.println("\n"+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
                              break;
                    // if col1 not match with any value, add a new record in list
                    else
                         list1.addElement(col1);
                         list2.addElement(col2);
                         row="Row "+ (rowCounter+1);
                         list3.addElement(row);
               }// end of for
               }//end of else
}//end of while
}//end of while(1): main_loop
     }catch(Exception ex){
     //System.err.println(ex);

sorry~~I am new here!
class MyActionListener implements ActionListener{
         public void actionPerformed(ActionEvent e){
              if (e.getActionCommand()=="SEARCH")
             try{
                      Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                      con1= DriverManager.getConnection("jdbc:odbc:Test");
                      stmt2= con1.createStatement();
                      input1 = new String(pathTf.getText());
         main_loop: while(true){
                 if (input1.equals("0")){
                             // break out of while(1)
                 break main_loop;
                  st= new StringTokenizer(input1," ,-=>");
                 while(st.hasMoreTokens()){
                              // analyze the input stream.
                                 input1= st.nextToken();
                                 input2= st.nextToken();
                      query= "select "+ schema[Integer.parseInt(input1)-1]+ ","+ schema[Integer.parseInt(input2)-1]+ " from [Sheet1$]";
                 rs2= stmt2.executeQuery(query);
                 rowCounter= 0;
                 list1.clear();
                 list2.clear();
                 list3.clear();
                while(rs2.next()){
                       // increase the row counter
                rowCounter++;
                       // initial the flag
                col1= rs2.getString(1);
                col2= rs2.getString(2);
                       // for the initalization
                  if (list1.isEmpty()){
                      list1.addElement(col1);
                       list2.addElement(col2);
                        row="Row 2";
                      list3.addElement(row);
                    // compare weather exist dependance
                       else
                          for (int i=0;i<list1.size();i++){
                            // if col1 match with the first part of value in the list
                                 if (((String)list1.get(i)).equals(col1)){
                          // The independence pair match
                 if (((String)list2.get(i)).equals(col2)){
                     break;
                          else
            textArea.append("\n"+"Violate Integrity Constraints Found : "+" Row "+ (rowCounter+1)+ " not    match    with "+ list3.get(i)+".");
           System.out.println("\n"+" Row "+ (rowCounter+1)+ " not match with "+ list3.get(i)+".");
                        break;
                      // if col1 not match with any value, add a new record in list
                        else
                             list1.addElement(col1);
                             list2.addElement(col2);
                             row="Row "+ (rowCounter+1);
                             list3.addElement(row);
                   }// end of for
               }//end of else
           }//end of while
        }//end of while(1): main_loop
                             }catch(Exception ex){
                                 //System.err.println(ex);
                                 }

Using relative path for in file/ftp adapter

Hi All,
How to have a relative path for file/ ftp adapter's inbound/outbound operation?
Example: Consider $ORA_HOME = /home/oracle --> This environment variable can be different on different machines
i want to drop a file in to $ORA_HOME/folder1/folder2 (Or poll for a file).
<partnerLinkBinding name="FTP">
<property name="wsdlLocation">FTP.wsdl</property>
<property name="out_dir" type="LogicalDirectory">What do i write here???</property>
<property name="retryInterval">60</property>
</partnerLinkBinding>
if i cant configure this in partner link section or in activation agent sction, how else do i achieve this?
i am using 10.1.3.* version.
Thanks in advance.
Roshan.

You can achive it using the deployment scripts if the directory is changing on the basis of the environment
If you want to change at run time than you can use the jca properties to set using the variables at runtime.
Regards,
Ajay

Data integrator for HP-UX missing data quality and data profiling

Hi All,
I have installed ODI 10.1.3.40.0 from odi_unix_generic_10.1.3.4.0.zip in HP unix 11.23.
Data quality and data profiling is missing in that zip ? Could anyone please help me how to get installer of data quality and data profiling for Oracle data integrator in HP UX 11.23.
Any response will be highly appreciated.
Thanks in advance.
regards
Umapada
Edited by: user10612738 on Nov 28, 2008 1:54 AM

The integrated packaged( ODi, data quality and data profiling) for HP-UX wount available till 10.1.3.5.0 which will be released by this year end.

"Date Modified" for all files being changed if "Automatically write to XMP" is on

Recently upgraded from LR3 (v3.4.1) from LR2 on OSX 10.6.8 and have always had Catalog Settings > Automatically write changes into XMP turned on.
When browsing existing JPG files in my Library (no Develop changes, no keywording, no Presets, no Import), LR3 is writing to disk — i.e., when I look at files in Finder, almost every viewed file’s “Date Modified” is being set to today’s date and time. (It actually creates a .swp file, then changes it's name back to .jpg)
This is really bad, as it's making it impossible for me to use Finder to figure out when I last worked with a file, it is triggering needless Time Machine and Backblaze backups, and unnecessarily churning my disk.
If I turn off "Automatically write..." this behavior stops. Per David Marx at thelightroomlab.com, I tried turning off this preference, manually doing a "Save Metadata to File" for all files, letting that complete, then turning the preference back on. This does not solve the problem.
Per a suggestion at photoshop.com, I used ExifTool to see what changes LR was writing to a sample file; from the diff below, you can see that LR is adding a bunch of new fields as well as moving other fields around. But my point is that LR3 should never overwrite a file on disk if all I am doing is browsing thru them.
Is anyone else seeing this? Any ideas would be greatly appreciated!
-- David
diff Exif5609_original Exif5609_update
2c2
< FileName: DSC_5609_original.JPG
> FileName: DSC_5609_update.JPG
5,6c5,6
< FileModifyDate: 2009:11:27 21:32:54-08:00
< FilePermissions: rwxr-xr-x
> FileModifyDate: 2011:08:07 22:06:47-07:00
> FilePermissions: rw-r--r--
27a28,29
> ShutterSpeedValue: 1/200
> ApertureValue: 7.1
55d56
< SerialNumber: 3209521
75d75
< Lens: 18-200mm f/3.5-5.6
185,188d184
< UserComment:
< SubSecTime: 00
< SubSecTimeOriginal: 00
< SubSecTimeDigitized: 00
211a208,299
> XMPToolkit: Adobe XMP Core 5.2-c004 1.136881, 2010/06/10-18:11:35
> CreatorTool: Ver.1.00
> MetadataDate: 2011:08:07 22:06:47-07:00
> SerialNumber: 3209521
> LensInfo: 18-200mm f/3.5-5.6
> Lens: 18.0-200.0 mm f/3.5-5.6
> ImageNumber: 26634
> RawFileName: DSC_5609.JPG
> SavedSettingsName: Import
> SavedSettingsType: Snapshot
> SavedSettingsParametersVersion: 6.4.1
> SavedSettingsParametersProcessVersion: 5.0
> SavedSettingsParametersWhiteBalance: As Shot
> SavedSettingsParametersIncrementalTemperature: 0
> SavedSettingsParametersIncrementalTint: 0
> SavedSettingsParametersExposure: 0.00
> SavedSettingsParametersShadows: 0
> SavedSettingsParametersBrightness: 0
> SavedSettingsParametersContrast: 0
> SavedSettingsParametersSaturation: 0
> SavedSettingsParametersSharpness: 0
> SavedSettingsParametersLuminanceSmoothing: 0
> SavedSettingsParametersColorNoiseReduction: 0
> SavedSettingsParametersChromaticAberrationR: 0
> SavedSettingsParametersChromaticAberrationB: 0
> SavedSettingsParametersVignetteAmount: 0
> SavedSettingsParametersShadowTint: 0
> SavedSettingsParametersRedHue: 0
> SavedSettingsParametersRedSaturation: 0
> SavedSettingsParametersGreenHue: 0
> SavedSettingsParametersGreenSaturation: 0
> SavedSettingsParametersBlueHue: 0
> SavedSettingsParametersBlueSaturation: 0
> SavedSettingsParametersFillLight: 0
> SavedSettingsParametersVibrance: 0
> SavedSettingsParametersHighlightRecovery: 0
> SavedSettingsParametersClarity: 0
> SavedSettingsParametersDefringe: 0
> SavedSettingsParametersHueAdjustmentRed: 0
> SavedSettingsParametersHueAdjustmentOrange: 0
> SavedSettingsParametersHueAdjustmentYellow: 0
> SavedSettingsParametersHueAdjustmentGreen: 0
> SavedSettingsParametersHueAdjustmentAqua: 0
> SavedSettingsParametersHueAdjustmentBlue: 0
> SavedSettingsParametersHueAdjustmentPurple: 0
> SavedSettingsParametersHueAdjustmentMagenta: 0
> SavedSettingsParametersSaturationAdjustmentRed: 0
> SavedSettingsParametersSaturationAdjustmentOrange: 0
> SavedSettingsParametersSaturationAdjustmentYellow: 0
> SavedSettingsParametersSaturationAdjustmentGreen: 0
> SavedSettingsParametersSaturationAdjustmentAqua: 0
> SavedSettingsParametersSaturationAdjustmentBlue: 0
> SavedSettingsParametersSaturationAdjustmentPurple: 0
> SavedSettingsParametersSaturationAdjustmentMagenta: 0
> SavedSettingsParametersLuminanceAdjustmentRed: 0
> SavedSettingsParametersLuminanceAdjustmentOrange: 0
> SavedSettingsParametersLuminanceAdjustmentYellow: 0
> SavedSettingsParametersLuminanceAdjustmentGreen: 0
> SavedSettingsParametersLuminanceAdjustmentAqua: 0
> SavedSettingsParametersLuminanceAdjustmentBlue: 0
> SavedSettingsParametersLuminanceAdjustmentPurple: 0
> SavedSettingsParametersLuminanceAdjustmentMagenta: 0
> SavedSettingsParametersSplitToningShadowHue: 0
> SavedSettingsParametersSplitToningShadowSaturation: 0
> SavedSettingsParametersSplitToningHighlightHue: 0
> SavedSettingsParametersSplitToningHighlightSaturation: 0
> SavedSettingsParametersSplitToningBalance: 0
> SavedSettingsParametersParametricShadows: 0
> SavedSettingsParametersParametricDarks: 0
> SavedSettingsParametersParametricLights: 0
> SavedSettingsParametersParametricHighlights: 0
> SavedSettingsParametersParametricShadowSplit: 25
> SavedSettingsParametersParametricMidtoneSplit: 50
> SavedSettingsParametersParametricHighlightSplit: 75
> SavedSettingsParametersSharpenRadius: +1.0
> SavedSettingsParametersSharpenDetail: 25
> SavedSettingsParametersSharpenEdgeMasking: 0
> SavedSettingsParametersPostCropVignetteAmount: 0
> SavedSettingsParametersGrainAmount: 0
> SavedSettingsParametersLensProfileEnable: 0
> SavedSettingsParametersLensManualDistortionAmount: 0
> SavedSettingsParametersPerspectiveVertical: 0
> SavedSettingsParametersPerspectiveHorizontal: 0
> SavedSettingsParametersPerspectiveRotate: 0.0
> SavedSettingsParametersPerspectiveScale: 100
> SavedSettingsParametersConvertToGrayscale: False
> SavedSettingsParametersToneCurveName: Linear
> SavedSettingsParametersCameraProfile: Embedded
> SavedSettingsParametersCameraProfileDigest: D6AF5AEA62557FCE88BC099788BBD3CC
> SavedSettingsParametersLensProfileSetup: LensDefaults
> SavedSettingsParametersToneCurve: 0, 0, 255, 255
> IPTCDigest: d41d8cd98f00b204e9800998ecf8427e
228,230d315
< SubSecCreateDate: 2009:11:27 21:32:54.00
< SubSecDateTimeOriginal: 2009:11:27 21:32:54.00
< SubSecModifyDate: 2009:11:27 21:32:54.00
http://feedback.photoshop.com/photoshop_family/topics/lr3_date_modified_for_all_files_bein g_updated_when_browsing_photos_if_catalog_settings_automatically_write_changes_into_xmp_is /replies/6313647

clvrmnky wrote:
davidpope007 wrote:
Then when LR3 loaded my old LR2 images into memory, it "dirtied" the in-memory copy of the file by adding in these new LR3 XMP fields. Then, because I had "Automatically write XMP" on, it said "I better write these changes to disk".
Yuck. As a former software engineer, this is very bad software engineering.
It should wait until the user dirties the file (via Develop, keywords, etc.) before presuming to add a bunch of metadata fields that are unique to the new version of LR3.
Well, I'm a current software developer, and this is, really, a perfectly reasonable thing to do. It is a reasonable trade-off for a convenient feature required by a small subset of users.
Yes, in most cases the in-memory copy should "never" be dirtied unless the user makes a gesture of some sort, but like I said earlier, this option (once set by the user) sets up the situation where this gesture becomes implicit. This is a clear trade-off for the sake of convenience. And if the XMP is out of date and needs to be updated en masse, so be it.
The fact is, there is no easy way around this. Do we save up /every/ dirty buffer somehow until you make a gesture that /might/ require the XMP to be up-to-date before acting on that gesture? Now we have to worry about unflushed buffers if something goes wrong and the app exits. Do we save the buffers to the DB? Now we have to block some calls to make another blocking call to flush some or all of those to DB, and then write some or all of it out to one or more files. In what order? What if there is a gesture to have X files with up-to-date XMP and some or all of those are in unflushed buffers, unflushed DB writes or we have to wait for the DB.
As you can see, this is a transactionality nightmare, and the easiest and safest thing to get what the user wants (i.e., up-to-date XMP for the purpose of talking to a third-party XMP aware app) is to simply update the sidecar or XMP block in an atomic manner using the correct file IO. The file will have to change at some point, so it may as well be now.
[Thanks to both of you for your detailed replies. I am aware of the need for tradeoffs so when you say the approach taken is quite reasonable, I do believe you. I also apologize in advance for the length of the following and am extremely aware of the time it must have taken you to compose the above replies, but I'm going to add a bit more, if only for my own piece of mind and in hopes of coming up with a solution for my workflow.]
From my naive point of view, I was expecting the answer to be simply "don't raise the XMPDirtyFlag upon reading in a file". Obviously if your architecture requires you to "upgrade to latest XMP format" upon read, and another part of the system auto-detects "out of date XMP", then it's going to write those changes to disk.
But it didn't need to be designed that way. LR obviously has mechanisms to know when a user has made a change to XMP so it is able to write XMP changes to disk only when necessary.
The promise (to me) of "Automatically Write XMP changes to disk" was to auto-save my changes, and not those made for any internal (i.e., XMP versioning related) changes.
Perhaps the premise is that it is LR3's job to update an individual file's XMP to the latest version so that other XMP-aware apps can make use of it? I would argue that those third-party XMP-aware apps already have to know how to deal with all prior versions of XMP, so LR3 should just leave well enough alone.
You asked if my problem with your approach was that it was "inelegant"; not at all, it is based on my own perception of what I need from my workflow, so let me describe that so maybe we can find a better way:
* Part of the appeal of LR to me is that it preserves my original file as it came off the memory card, allowing me to move to a different workflow/toolset in 2025 if I choose to do so
* However, with all of changes contained in a single database file, I'm concerned about rare (but possible) corruption, so to mitigate this risk, I let LR backup my database weekly and it's also backed up continuously in the cloud via Backblaze
* Even with backups of the database, there is still a chance that I could lose changes made to individual files (e.g., LR corrupts the DB and I have to go back to last week's DB)
* Thus the appeal of the "auto-write to XMP" flag -- that way critical changes (develop, crop, keywords) are saved on a per-file basis; I liked the "automatic" part of this (as opposed to a manual save) because then I don't have to teach others in my family how to manually save XMP changes
* A nice side-effect of this setting is now when I use Finder to find a file and double-click on it to edit it in Photoshop, all my develop changes are right there; (in other words, I like the flexibility of not having to fire up LR in order to just invoke PS from within it); also when I use Bridge I see all the keywords there
* So with LR2, I had gotten used to what I thought was the best of all worlds -- autosave of changes at the file level via XMP + raw negatives untouched (i.e., Date Modified == the date I took the picture); this allows me to use operating-system-level tools -- Finder -- to locate/search for files
* Now I upgrade to LR3 and I'm finally now understanding that a concept "XMP versioning" is going to result in changes to many, but not all my files. (That's something else that's annoying about this issue -- I open up the Grid and browse a folder of files, and only seemingly random ones I've cursored over seem to get written to disk -- if it's so urgent that LR3 update the XMP, then it should do it for all the files in the catalog or at least in that directory)
Here's a screenshot from Finder of what I see everytime I look at this folder:
* So now I have to assume that each new version of XMP and/or LR is going to touch my files on disk. Sigh.
* What I don't like about this is that it is ruining the promise of "untouched raw negative". Yes, the image data is untouched -- which I agree is most of the benefit; but the file has been touched.
* Perhaps you might empathize a bit more if you imagined that someone went thru all your source code or Word files and randomly changed the date to "today" because you upgraded compilers or moved to Word 2011.
I agree all of this would be solved by having an XMP sidecar file for JPGs, but you indicate that's not going to happen.
You've also alluded to the solution of "resetting the Date Modifed" to it's original value -- which I believe is what Finder does when you move or copy a file -- but that that is fraught with issues as well. I believe you when you say there are issues, but again the naive part of me wonders why that soultion would be so bad...
I just thought of another potential solution -- turning on Date Created in Finder -- but it turns out that's changed, too.
I am really at a loss as to what to do and would welcome your suggestions.
Thanks again and kind regards,
-- David

Data limitation for inserts with JDBC?

I'm having problems with inserting data using JDBC that came with
Oracle 8.1.5. I'm inserting text into a long field. It works
fine until i approach 99K+. The error i'm receiving is
"unimplemented or unreasonable conversion requested". If i
remove some of the text it works fine. Its not the content thats
that causes the problem, but the size. I just inserted a string
of a's until it hit some limit. Is this a known limit? Please
help.
Text added: (99K+ of a's)
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
null

HI Nilesh
This error comes when Xi server is unable to access the Data base server .Please check if port 1433 is open from your Xi server .
Format for Connection string
jdbc:microsoft:sqlserver:,<database path>:1433;DatabaseName=,<dbname>;AuthenticationMethod=type2
Similar problem with solution
Socket Error
Error in JDBC adapter
Cheers..
Vasu
<u>** Reward Points if found useful **</u>

How to do structure conversion for J2EE File Receiver Adapter

Hi,
I am trying to move my adapter configuration from J2SE to J2EE. My J2SE file inbound adapter has:
mode=XMB2FILEWITHCONVERSION
I am unable to find a similar feature with the J2EE File Receiver's Communication Channels configuration.
Pls advise.
Thanks.

Per a similar topic submitted previously (File Adapter in XI 3.0), this feature requires SP Stack 04.
Regards,
Bill

Regarding data integrity for XI file/jdbc adapter

Similar Messages

Maybe you are looking for