Regarding F4 help for text box in screen painter

i am passing 4 valus in data element values tab, it is passing correctly to the text box, if i am making the text box to ouput only then the values and button for pop up is not comming, what do i need to do if i need values for output only.

Hi Rocky,
I think u can try out this.
make ur textbox both input and output field and in PBO write
loop at screen.
if screen-fieldname = 'TEXTBOX'.
screen-input = 0.
endif.
endloop.
Regards.

Similar Messages

Can any share me the procedure to create a text box in screen painter?

Hi Friends,
Can anyone share me the procedure to create a text box in screen painter and browser for attaching files ....please its urgent....
Points will be definetly rewarded.
Thanks

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question... is this an exam question?
Jonathan

How to create a drop down box and text box in screen painter?

Hi i am totally new to this concept of screen painter..please can any tell me
how to create drop down box in screen painter?
How to create or display default date and time values?
How to create text box for giving comments?
How to store the records that we are entering in a table?
Please can any one send me the procedure for creating all these its very urgent useful information will be surely rewarded.

Hi,
Check all these.
1.how to create drop down box in screen painter?
To get Drop Drown Box on screen .
Follow these steps.
1.
Go to T.Code SE51 and Select Laypout for the Screen.
2.
Double click on the field for which u want Dropdown box.
3.
Then U will see Name ,Text ,DROPDOWN.Click on that and select List Box or ListBox with key . Better to to select first one.
4.
Save and Activate ur screen .
5.
Enter the following piece of code in the PBO of the screen.(Change for ur requirement).
6.
The following code should be written under PROCESS BEFORE EVENT in the MODULE.
TYPE-POOLS :vrm.
DATA:
i_natio TYPE vrm_values, "-->Table that is passed through FM vrm_set_values
w_natio LIKE LINE OF i_natio.
DATA:
BEGIN OF i_t005t OCCURS 0,
    land1 TYPE t005t-land1,
    natio TYPE t005t-natio,
END OF i_t005t.
IF i_t005t[] IS INITIAL.
SELECT land1 natio
     FROM t005t
       INTO TABLE i_t005t
   WHERE spras = sy-langu.
IF sy-subrc = 0.
LOOP AT i_t005t .
      w_natio-key = i_t005t-land1.
      w_natio-text = i_t005t-natio.
      APPEND w_natio TO i_natio.
      CLEAR w_natio.
ENDLOOP.
ENDIF.
ENDIF.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
                      id = 'I_IT0002-NATIO' "-->Field for which dropdown is needed.
                values = i_natio
EXCEPTIONS
   id_illegal_name = 1
            OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
2.1.How to create or display default date and time values?
1.
create input field for DATE and TIME on screen.ex. DATE1 and TIME1 are screen field names .
2.
Just assign SY-DATUM to DATE1 and SY-UZEIT to TIME1 under PROCESS BEFORE EVENT.
3.How to create text box for giving comments?
1.
Define one variable in the TOP include with type STRING means Global variable.
2.
Create one input field by giving screen field name which u have defined in the above step.
4.How to store the records that we are entering in a table?
For this case.. Create one table control. you can select one record and create record in the Z table by pressing button on Application toolbar..
Check the following steps to handle Table control.
1).
U should take one variable in your internal table or in structure which
is used for table control fields
ex :
data :
begin of itab occurs 0 ,
    mark type c , "This is to select the record.
    matnr like mara-matnr ,
    matkl like mara-matkl,
    maktx like makt-maktx,
end of itab .
Controls: TABC types TABLEVIEW using screen 100.
2).
This mark variable should be given in Table control properties.
follow the path
double click on the table control-->attributes .->select
w/SelColumn and in that itab-mark. Check in the figure.
[Table control properties screen|http://bp2.blogger.com/_O5f8iAlgdNQ/R99gOUH8CXI/AAAAAAAAA9I/d3gOum1fJ6s/s1600-h/pic28145-796618.jpg]
3).
After that. Take this example.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT ITAB WITH CONTROL tabc
ENDLOOP.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP AT ITAB.
   Module read_table_control.
ENDLOOP.
module user_command_0100.
In this Module read_table_control, You should write the following code
MODULE read_table_control INPUT.
MODIFY itab INDEX tabc-current_line."( This will update the
"ITAB table MARK field with 'X ' whatever we have selected
"on table control.)
ENDMODULE.
4)
If you want to Delete some of the records from Table control
follow this code Create one pushbutton and give Fucnction code to that
and write below code
CASE OKCODE.
WHEN 'CREATE'.
LOOP AT itab WHERE mark = 'X'.
"Use UPDATE statement to create new record.
ENDLOOP.
ENDCASE.
I hope that you will get something.
Regards,
Venkat.O

F4 help for date field on screen painter

Hi ,
I created a screen using dialog programming . I have a date field there which is defined as
itab-date.
The format for this field in Element list is DATS .
How do i get a drop down on the date field on the screen .
Please advise
Thanks !

In Report u have to add,
TYPES: BEGIN OF TY_F4HELP,
          ENAME TYPE PA0001-ENAME,
          PERNR TYPE PA0001-PERNR,
       END OF TY_F4HELP.
Data:   IT_F4HELP TYPE STANDARD TABLE OF TY_F4HELP WITH HEADER LINE.
*Begin of add F4 in Parameter field Ename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_ENAME.
DATA: IT_RETURN_TAB TYPE ddshretval OCCURS 0 WITH HEADER LINE . " Return table for F4 help
SELECT DISTINCT ename pernr
    FROM PA0001
    INTO TABLE IT_F4HELP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD        = 'ENAME'
      VALUE_ORG       = 'S'
    TABLES
      VALUE_TAB       = IT_F4HELP
      RETURN_TAB      = it_return_tab
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS          = 3.
READ TABLE it_return_tab INDEX 1.
IF SY-SUBRC <> 0.
ENDIF.
IF sy-subrc = 0.
    MOVE it_return_tab-fieldval TO P_ename.
ENDIF.
CLEAR: it_return_tab.
*End of add F4 in Parameter field Ename.

Background color change option for box in screen painter

have created a box in screen painter . is there any option to change the back ground color of this box.
please help

No, you can not change the background color of your screen painter box.

How to add record in List Box in Screen Painter(SE51) ?

I am not able to add record in List box in Screen Painter using se51 Transaction code.
Regards,
Nirav Desai

Dear All,
I found the solution.
If you are facing same problem , follow the bellow steps.
1. Declare in report.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
LIST TYPE VRM_VALUES,
VALUE LIKE LINE OF LIST.
2. IN PBO Event.
clear: list.
NAME = 'TXT_PERIOD'. " your screen field name
VALUE-KEY = '1'.
VALUE-TEXT = 'LINE 1'.
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'LINE 2'.
APPEND VALUE TO LIST.
VALUE-KEY = '3'.
VALUE-TEXT = 'LINE 3'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING ID = NAME VALUES = LIST.
Regards,
Nirav Desai

Adding input box to screen painter

Hi abapers,
my question is...... is it possible to add input box to screen painter though code,
NOT by drag and drop?

Well it would probably be technically possible to create a complete dynpro "on the fly" in memory and then save and generate it (i.e. replicate everything SAP does in SE80) and then display it to the user... however the risks are high, and the user might not like the delay while your program does this. The usual practice is to define the field on the screen, and then hide it if it is not required under some circumstances, using the usual "loop at screen. screen-active = '0'. endloop." technique.

F1 help for Check Box on Selection-Screen

Hi Friends,
I want to attach F1 help for a check box on selection-screen. Though I have checked SDN community for this but did not get any relevant answer.
so, please give me correct example if someone has done similar.
Regards
Pradeep

Pradeep,
I think this fucntion module needs to be used DD_SHLP_CALL_FROM_DYNP.If possibe try to screen debug using /H before pressing f1 for a field.
K.Kiran.

Please help with text boxes

Can somebody help me wit hmy problem. I have a fom with many tables in it, some cells of the table are text boxes or at least they were when I developed it. Now I need to edit some of the cells and for some reason I cannot do it as the cell is not a text box but became (untitled<draw>) I cannot change its type back to text. Can some one advise what to do whitouh retyping text again in the new cell.
Many thanks in advance

You are welcome!
I have a preference for Javascript (just get in the syntax zone) and use it for most things (except dates).
As you know:
this = current object
rawValue = accesses the value of object
From an Excel point of view FormCalc is similar and has inbuilt function like sum(), Max(), etc. Syntax is $ for current object and you don't need the rawValue. This is very handy when summing a column in a repeating table. Also FormCalc is excellent for working with time and dates. (not that you can't work around in Javascript, but it is heavier).
Adobe have a very good reference for FormCalc at http://www.adobe.com/go/learn_lc_formCalc_82 and I would recommend that to you. I think it comes from the LC help file, but is easier to use.
From a performance point of view, you can either have FormCalc in the calculate event of an object, which looks back at other fields (this will fire each time one of these fields changes). Alternatively you can have the FormCalc in the exit event of a field, which pushes a calculation/value forward to another object.
Functions are handy if you have a script that you are using several times in a form. You write the script in a "script variable" and then call it in the objects events. HOWEVER, script variables are available in Javascript only.
One last thing is that if you have a constant (like VAT), then rather than including "* 0.21" in all of your calculations, use a global variable in the Form / Properties / Variables tab. currentVat = 0.21. Then in your calculations would be "* currentVat.value". If the VAT rate changes then you only have to change it in one location.
In summary FormCalc is more akin to Excel; just watch the syntax.
Good luck,
Niall

Set default width for text box in Adobe Acrobat X

Hello!
I am using the textbox tool to add comments to a document. (not the Typewriter, but the Textbox, since that has more flexibility for formatting the text).
I know how to set the default proprties for text size, color, background color, etc.
Cannot figure out however to to set the default width. Every time I try to add a new textbox, it defaults to about 1 or 2 inches wide, so the text wraps around and around, and then I have to resize the box when I am done.
Is there a way to change the default width?
Thanks!

Hi, Amonra
I drew a box I like, and select, and then, Ctrl+C, and then Ctrl+V.
And move the pasted box where to need, and resize the length. At least I get same width boxes.
I don't know how to default it.
I hope it may help you.

Need help threading text boxes

Is there a way to make the text boxes that are threaded together auto number. If I put 600 in the first box, I want 601 to appear in the second box and so on.
thanks

rlmillerdesign wrote:
I am laying out a magazine and I have to create thumbnails to show each page. I have the thumbnail page laid out and I have text boxes that are linked under each thumbnail with the page number inside the text box. I want to be able to put the first page of the magazine in the first text box and it will auto fill the rest of them. As it is now, I have to type the page number into each box. I can tab through the boxes, but I can't figure out how to make it auto number and it would save a lot of time.
Thanks,
RL
It's not clear if your thumbnails are each threaded to their full-size text frames, or if each page-number text frame on the thumbnail page is threaded to the next one.
* If each thumbnail text frame on the thumbnail page is linked to the full-sized page elsewhere in the document, you can use the "next page number" marker.
* If the thumbnail text frames are not threaded to their corresponding full-sized page, you can create a cross-reference from each thumbnail text frame to a text frame on the corresponding full-sized page, using a cross-reference format that only captures and displays the page number.
* If your thumbnail page is intended to be a Table of Contents, you could generate a TOC that captures a paragraph style that's on each full-sized document page and adjust the TOC entries and non-threaded thumbnails to align suitably on the TOC page.
Search Google for terms like "InDesign table of contents," "InDesign cross-references," and "InDesign next page number marker," without quotes for details.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

How to create a F4 help for a report selection screen field

hi,
can any one guide me to create F4 help for a field in a selection screen in a report program,plz give me a sample code

hi,
Here are the following ways
1.with the help of match code objects we can create the F4 Functionality for Field.
Syntax is :
PARAMETERS: p_org LIKE t527x-orgeh MATCHCODE OBJECT zorg.
2. One more thing is we can do it with Search Help's also.
3. Even we can do it HELP Views also.
Help Views:
You have to create a help view if a view with outer join is needed as selection method of a search help
The selection method of a search help is either a table or a view. If you have to select data from several tables for the search help, you should generally use a database view as selection method. However, a database view always implements an inner join. If you need a view with outer join for the data selection, you have to use a help view as selection method.
All the tables included in a help view must be linked with foreign keys. Only foreign keys that have certain attributes can be used here. The first table to be inserted in the help view is called the primary table of the help view. The tables added to this primary table with foreign keys are called secondary tables.
The functionality of a help view has changed significantly between Release 3.0 and Release 4.0. In Release 3.0, a help view was automatically displayed for the input help (F4 help) for all the fields that were checked against the primary table of the help view. This is no longer the case in Release 4.0.
As of Release 4.0, you must explicitly create a search help that must be linked with the fields for which it is offered (see Linking Search Helps with Screen Fields ).
Existing help views are automatically migrated to search helps when you upgrade to a release higher than 4.0.
A help view implements an outer join, i.e. all the contents of the primary table of the help view are always displayed. You therefore should not formulate a selection condition for fields in one of the secondary tables of the help view. If records of these secondary tables cannot be read as a result of this selection condition, the contents of the corresponding fields of the secondary table are displayed with initial value.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:15 PM

How to add a search help for a field in Screen Personas?

I just started learning to use a Screen Personas, and I want to know how to add a search help for a field.
I found a property in the help document named "IsLookupSupported". Is it the key? But I saw it was gray in the field I created, and its value is "false". I could not change it.

Hi, Tamas,
I found the reason. The function Z_WEBRFC_READ_DATA_SH had a string concatenation error.
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
The correct code is like:
CONCATENATE '{"results":[{"key": "shlpname", "value": "' l_shlp '"},{"key": "fieldname", "value": "' l_field '"}]}' INTO htmldoc-line.
Another question is, I can't get any words in Chinese from WebRFC. It returns error when I try it. How can I configure it?
Xin

Help with text box rasterization in adobe muse

When ever I create a text box, add some text , highlight the text and try and create it into a hyperlink, it says that the text requires rasterization and that the hyperlink will not work.
How do I 'rasterize' the text box which will allow me to convert the text within, into a hyperlink?

For some reason in the new MUSE it wont let me add an email address for example:
mailto:[email protected]
says it is not supported yet?
Jason

Can I stop iWeb from making png image files for text boxes?

I have a web page that contains one text box - the TextEdit file from which I pasted the text is 4 KB. The html file from iWeb is 12 KB. The shapeimage_2.png file is 132 KB! Is this necessary? How do I stop this. This is just text. Arial font, regular, 15 pt. The formating in the TextEdit version and the iWeb version is identical.

Some tips from this forum for reducing the number of png files in a web site:
1 - do not use and frames or borders, etc. around photos.
2 - don't use any reflections.
3 - create your own navigation bar with linked text* and turn of the iWeb Navigation bar. That's because the nav bar is all png based.
*Put your linked text directly under the Navigation bar. Then turn off the nav bar in the Inspector window. The nav bar will disappear and the linked text will move up to the top of the page as seen in this screenshot.
4 - use only the web safe fonts from the Font pane.
5 - do not use drop shadow on fonts.
6 - turn off smart quotes
7 - if you add a jpg to a page don't resize it in iWeb as that will cause it to be converted to png. Resize it to what you need before adding to the page..
The above will reduce the number and size of files associated with a web page quite a bit. Photos with fancy frames and reflections can generate a thumbnail png of around 110KB whereas the plain version will be a jpg of only 28KB. Although it doesn't sound like a lot, it will speed up loading of the page and be more darkside (i.e. PC) friendly.
Run a test with a test site and publish to a folder. Then follow the hints above and publish to another folder and compare folders.

Regarding F4 help for text box in screen painter

Similar Messages

Maybe you are looking for