PI 7.1 : File to JMS Scenario Help.

Hello Experts,
We are trying to implement a scenario where in we want to send the data in the file as it is to the JMS adapter in 7.1 because the data is already in expected format. The file is generated by SAP.
The format of the data is:
EDI_DC40  2000000000001044736700 0312  ZFDPFCI2                                                    ZDPFCOUT2                                  ZDPFCOSAPSD0    LS  SD0_200                                                                                PI        LS  DPFC                                                                                20100913041404                                                                                20100429062757      Z2FDPFCI2000                  200000000000104473600000100000001I000                            000000000                                                                                12345566677                                     12345566677                                                                                W                                                              JD]D[y
How can i achieve this? I have tried to put everything in a single field type string element and that doesn't work (parser error).
I don't want to go for FCC.
Thanks!
Harpreet

Following William's blog,  you can achieve it,  you can send any unstructured data through XI,
You don't have to create interface in ESR or IR.
How to send any data (even binary) through XI, without using the Integration Repository
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Regards
Liang
Edited by: Liang Ji on Sep 23, 2010 10:54 PM

Similar Messages

  • Regarding File to JMS scenario

    Hi friends please help me on file 2 JMS scenario. send me the screen shots of the below scenario.

    Hi
    Refer to following blogs .
    JMS Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
    /thread/217893 [original link is broken]
    JMS adapter -Message format pre-requisites
    /people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
    /people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
    Please go through the following links.....
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
    First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    Secondly, to configure JMS adapters;
    http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
    Else ref:
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
    How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
    How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Thanks!!

  • File to JMS Scenario - Error is Receiver JMS Adapter

    Hi,
    I am working on File to JMS scenario. I have deployed all required jars for MQ 6.0.2 in SDM. Create all MQ related objects. I am getting following error for Receiver JMS adapter in CC Monitoring.
    Please let me know if I have missed anything. Is there anything to do in Visiual Administrator->JMS Provider or JMS Connector for these kind of Scenarios?
    Thanks in Advance...
    Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
    at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
    at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
    at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
    com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2009
    MQJE016: MQ queue manager closed channel immediately during connect
    Closure reason = 2009
    at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
    at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

    Hi,
    I have made my Qmanager as default Qmgr. Now the error is :- Socket connection attempt refused
    Recv JMS Communication Channel Error:-
    Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for 'sap:QM_APPLE'
    at com.ibm.mq.jms.services.ConfigEnvironment.newException(ConfigEnvironment.java:586)
    at com.ibm.mq.jms.MQConnection.createQM(MQConnection.java:2110)
    at com.ibm.mq.jms.MQConnection.createQMNonXA(MQConnection.java:1532)
    com.ibm.mq.MQException: MQJE001: An MQException occurred: Completion Code 2, Reason 2059
    MQJE011: Socket connection attempt refused
    at com.ibm.mq.MQManagedConnectionJ11.(MQManagedConnectionJ11.java:212)
    at com.ibm.mq.MQClientManagedConnectionFactoryJ11._createManagedConnection(MQClientManagedConnectionFactoryJ11.java:318)

  • File to JMS

    Hi,
    Is there any blog that gives a step by step procedure for file to jms scenario.

    Hi,
    Please go through the following links.....
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
    First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    Secondly, to configure JMS adapters;
    http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
    Else ref:
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
    How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
    How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    Please Reward Points******
    Cheers.,
    Stallin

  • How to procced with JMS scenario.

    Hello everyone,
    I want to test File to JMS scenario.
    I believe XI provides JMS adapter as a part of it, Am I correct?
    II am totally blank , from where should I start :$----
    <b>which jar files i need?
    From where can I get them ?
    WhereI should I deploy them ?
    Any prerequisitives for it ?
    Any setting to be done in SLD or anywhere else ?
    And what other steps i need to do to implement any JMS scenario?</b>
    I would appreciate anyone's help. Was trying to find some docuement on this in Sdn but docs confused me.
    Thanks,
    Gaurav

    Gaurav,
    In case you want to access an external JMS service provider like Sonic MQ and so on, then you will need to install the JMS drivers for the same.
    To get the JMS drivers, you need to get which JMS service you are trying to acess, get the Drivers from that vendor and then install them on the XI server.
    In case you are planning to use the JMS service provided by SAP XI's Web AS then you can refer to the blog Pointed above.
    For how to install the drivers,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
    Regards
    Bhavesh

  • Regarding JMS scenario

    HI friends. i am doing file 2 jms scenario. in that during configuration part i need jms receiver details. i have IBM MQ in my system . can anybody help me hw to create  a queue queue name, channel name, port number etc.

    Hi,
    U need to create quque on MQ server. ask the administrator to create the queues. he will provide all the necessary details which is required for configuration.
    Please go through the following links.....
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
    First would be to deploy drivers for JMS scenarios - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    Secondly, to configure JMS adapters;
    http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    In case JMS scenario that you have is a sync one, in that case if you are below SP19 you might have to build a BPM - ref: http://help.sap.com/saphelp_nw04/helpdata/en/83/d2a84028c9e469e10000000a1550b0/content.htm
    Else ref:
    /people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
    /people/venkataramanan.parameswaran/blog/2007/01/18/syncasync-communication-in-jms-adapter-without-bpm-sp19
    How to correlate JMS messages - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5059f110-0d01-0010-7c8b-fdc983be70c0
    How to use conversion modules in JMS - https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    thnx
    chirag

  • File to Mail Scenario - Need help

    Hi all,
    I am trying a simple file to mail scenario in which i am using following data types .
    Source datatype -
    Scr_File_DT
    -- Root
    Material_no
    Plant
    Target datatype -
    Tgt_Mail_DT
    --Content
    In the message mapping i am concatenating material_no and plant and mapping it to content.
    The receiver mail adapter parameters are as follows -
    Transport protocol - SMTP
    Message Protocol - XIPAYLOAD
    URL: smtp://gmail.com
    Configure User Authentication: X (Check box is selected)
    Authentication Method: Plain (from drop-down box)
    User: [email protected]
    Password: ****
    from: mail address
    to: mail address
    subject : test mail.
    Just wanted to confirm whether these settings are correct or not? Because i am not getting the mail in my mailbox.
    Can anyone please help me on this.
    Also are there any other settings required for using mail adapter ?
    Thanks.

    Hi,
    you should add your email address to your user,add specific users list add you r user in alrtcatdef.
    generally you should maitain the email data type format like
    subject,from,to,content-type..
    se below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    Regards
    Chilla..

  • Help in file to RFC scenario

    hey guys i m doing a File to RFC scenario using BPM and taking help from the following blog /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit i m a bit confused about the services being used in figure 19 and figure 20,for a File to RFC(sync) scenario,do i need to have 2 business systems,one of WEB as ABAP and one of third party?
    why is he using two different services in figure 19 and 20.
    thanx
    ahmad

    Dear Bhavesh,
                          Someone earlier told me via SDN that, it is mandatory to create a WEB AS ABAP business system for any SAP system running on ABAP stack participating in the integration scenario. If the above is true than Ahmad needs to create one WEBAS ABAP business system for the R/3 end
    also a third party business system or a business service for file system.
    Pls advice.
    Regards,
    Ashish

  • Help me please with File-to-RFC scenario

    Hi, I'm a beginner with XI and I have as problem with an interface.
    This interface is a file-to-RFC scenario an it was working correctly a few days ago. Suddenly, the interface doesn´t work and we haven´t error message in sxi_monitor transaction. The queues are fine and we haven´t any sign that why the interface doesn´t work.
    If someone´s had a similar problem and know how to solve it or someone can teld me a clue, please, help me!!
    Thank you

    HI,
    You can monitor the Communication Channel in RWB.
    Go Component Monitoring in Runtimework Bench and click on Adapter Engine and select the Communicaiton Channel and select your channel name.
    You can find any whether it is in active or not?
    Also check the Message monitoring in RWB.
    Regards
    Sridhar Goli

  • Need sample JMS scenario

    Hi All,
    I need a sample JMS scenario to test before going for dev.my requirement is like this..
    (Java program/Web service)>JMS queue>XI>JMSQueue>(Java custom   pgrm/Web  service).
    Thanks in advance.
    Regards,
    Srinivas

    Hi Srini,
      I guess u need a real worldd scenario to work out.
    suppose ur client webservice is sending a file and ur server webservice is storing it in different queue.so for testing u can do 1 thing ...create queues in sender sys,xi and reciver sys....and check weather these r working or not!!!
    try out these links...may be useful for u!!!
    JMS Adapter
    http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how%20to%20use%20the%20content%20conversion%20module%20with%20the%20xi%203%20j2ee%20jms%20adapter
    /thread/217893 [original link is broken]
    JMS adapter -Message format pre-requisites
    /people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
    /people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
    regards
    Biplab

  • XI 3 File to IDoc scenario - Still referencing Old Logical system

    Hi
    Dont know if you can help. I have a file to idoc scenario  using XI 3 to R/3 4.6c system.
    I had the interface working from a third party system XMLHUB to SAP R/3. The Logical system name for the XMLHUB was XMLHUB01 in the SLD which I have set up as a partner profile in R/3. I have recently changed the logical system name to XMLHUBDEV01 in the SLD and created that logical system in R/3 and changed the partner profile to XMLHUBDEV01.
    Unfortunately in the sender information of the IDoc the partner number is still XMLHUB01 and not XMLHUBDEV01. I don't understand where this partner is sent from to get into the control record of the IDoc.
    I have cleared the SLD cache in both the Repository and the directory. Is there somewhere else I should be looking? Any help would be appreciated.
    Regards
    Daniel

    hi daniel...
    this thread wud answer ur query....
    Re: IDOC Payload
    regards..
    vishal

  • Step by Step Guide Details for RFC to File and File to RFC scenario

    Hi Guru's
    Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File  scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
    For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
    I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
    thanks in advance.
    Regards
    Raj

    Hi Aaron,
    I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
    Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
    The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
    Edited by: Marshal on Oct 8, 2009 5:08 PM
    I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
    Edited by: Marshal on Oct 8, 2009 5:22 PM

  • Error in File to IDOC Scenario

    Hi,
    I have File to IDOC scenario.
    I am getting error in sender file channel.
    "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
    Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
    Despite of this error in sender channel I am receiving the message in XI.
    But in XI also it throws error :
    "Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
    Any help on this ?
    Thanks,
    Vikas

    Hello Vikas,
    I am getting error in sender file channel.
    "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Mandatory parameter 'xml.keyfieldName': no value found "
    Although I have used this parameter in content conversion 'xml.keyfieldName' (for each sub structure and defined a key field).
    Check your flat file structure whether the key field you have chosen is appropriate and also recheck the FCC details whether you have assigned the value for the key field i.e.  keyFieldValue.
    "Unable to convert the sender service PG_TOM_CEEMEA_RU_SFA to an ALE logical system"
    regarding the above error refer this
    https://wiki.sdn.sap.com/wiki/display/XI/Unable%20to%20convert%20Sender%20system%20to%20ALE%20logical%20system
    Regards,
    Prasanna

  • Error while doing a File to IDOC scenario

    Hi Experts,
    I have created a File to IDOC scenario where in i have sent a file which has to pass data to ABSEN1 IDOC.I could see the IDOC reaching R/3 ,but with the status 56: "EDI: Partner profile inbound not available"
    I have checked with all the configurations and couldnt find where it went wrong.
    Kindly help me in this regard.
    Thanks.

    Hi
    Check the inbound parameter and the process code.
    To find Process code for IDoc use Tcode WE42.
    ALE idoc trouble shooting use
    Troubleshooting of ALE Process
    look also this configuration
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34

  • File to RFC scenario with no BPM

    I want to create File to RFC scenario with no BPM. I want to invoke RFC synchronously to verify that I'm getting correct response back, but i dont wanna process the response. So, In SXMB_MONI i can check the response back from RFC right? Or do I need to have BPM if want to see the response back from RFC?
    What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK?
    Thanks,
    Deepesh

    Hi,
    I need to have BPM if want to see the response back from RFC? ... yes
    The BPM will help you find the response very comfortable.
    What kind of business system i need to create for RFC? can i use same business system for both File and RFC? I'm using one Business System created on Third party technical system, which i'm using for file Input, also for RFC. Is that OK? ..Yes you can .
    Regards
    Agasthuri Doss

Maybe you are looking for