Regarding:- Filter on Reports

Hi All,
I have built a layout on Balance sheet which consists of following reports:
1) Monthly Balance Sheet
2) Quarterly Balance Sheet(Previous Year End Balance)
3) Quarterly Balance Sheet Curr Qtr vs Prev Qtr
4) Quarterly Balance Sheet Current Qtr vs Previous Year Qtr
5) Quarterly Balance Sheet Current Qtr vs Previous Year End Balance
Now I have got a new requirement i.e. add a filter which would allow selection of one report at a time Where the user want’s to select each report individually, instead of it showing it all in one page.
Is it possible to add a filter option on reports..
Need help..urgent

Hi Deva,
Thanks for your kind reply. In the Dashboard, I have used a prompt(on Fiscal Quarter, Fiscal Year, Ledger Name).. When i checked the scope of this prompt its default set to page type. Could you please guide how to add filter on Reports..

Similar Messages

Can i filter a report based on a value of a navigational attribute?

Hi all,
i need to filter a report and the characteristic i need it's a navigational attribute that is already present in the infocube, can i use it as a filter or i need to add a new characteristic to the ic?
thank you

Hi
You can use navigational attributes to filter your report. When you switch on the navigational attributes at the cube level, the X table or Y table will be connected to the star schema of cube.
Navgational attributes behave like a characteristic in the report. You can create variables, filter etc on navgational attributes.
Hope it helps.
Regards
Sadeesh

Add Exists filter into Reporting Services MDX

Hi, I have a piece of auto generated MDX which I need to filter. This was a generated by Reporting Services when I added a parameter to a report reading from a cube.
WITH MEMBER [Measures].[ParameterCaption] AS [Dept].[DeptName].CURRENTMEMBER.MEMBER_CAPTION MEMBER [Measures].[ParameterValue] AS [Dept].[DeptName].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS [Dept].[DeptName].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue], [Measures].[ParameterLevel]} ON COLUMNS , [Dept].[DeptName].ALLMEMBERS ON ROWS FROM
( SELECT ( STRTOSET(@Yearly, CONSTRAINED) ) ON COLUMNS FROM [MyCube])
The parameter displays all [Dept].[DeptName] even though many are not in the report. How do I only show DeptName if it is in the report?

Hi Dark,
In SQL Server Reporting Services, the parameter will display all the Available Values for the user, and then the users select values from the drop-down list, and then filter the report data based on the selected values.
In your scenario, if you specify multiple available values from this parameter, then it will display all the DeptName on the report parameter pane. I have tested it on my local environment, the query works. Here is the sample query.
with member [Measures].[UniqueName]
AS
[Date].[Calendar].currentmember.uniquename
select [Measures].[UniqueName] on 0,
[Date].[Calendar].[Calendar Semester].members on 1
from(
select
( STRTOSET(@A, CONSTRAINED) )
ON COLUMNS FROM
[Adventure Works]
Reference
http://msdn.microsoft.com/en-IN/library/ms156303.aspx
http://www.oakwoodinsights.com/ssrs-mdx/
Regards,
Charlie Liao
TechNet Community Support

Unable to filter the report by clicking the last column's name

Hi,
I have interactive report page having lots of column. All columns were not fitting in the screen so I added a code in the region--- header and footer section---
<div style="overflow: auto; width: 1220px; height: 700px;">
I got a scroll bar at the bottom. But a new problem arised. When I am trying to filter the report by clicking the column name in the report page , a popup is opening for the first column but the pop up is not opening for the last column. For the middle columns, the popup is opening but not below its name. This pop is for filtering the report based on that columns.
Please give some idea to fix this bug.
Thanks,
Chandra Bhanu

You could try to display as many columns as fit your screen, and put the rest of your columns as form fields in a detail view, somewhat like this:
http://apex.oracle.com/pls/apex/f?p=vincentdeelen:report_details_in_iframe_v1
Please tell the steps how to do it.
Thanks,
Chandra Bhanu

How to filter a report by a predefined but reduceable list of words?

I am trying to filter a report by several different input values.
I want to be able to search by date, site, multiple regions (DEV_KEYS), multiple alarm types (ALM_TEXT) and omit entries containing a predefined, but reduceable, list of words (the E#s).
I want the E# variables to be a list with default values (eg. Alarm, Hi, Lo, Standby) but I want to be able to filter by any combination of these. I was thinking of using checkboxes so that I can tick or untick the words to filter depending on what search I'm doing, but I am unsure how to use them like this. At this point I have them in a textbox each and the search will omit the entires when the text is there - what I want. If I delete the word and click Go the search brings back no results. However if I enter some obscure string (eg i5wqii) the word that I replaced will no longer be omitted - what I want. I don't want the user to have to enter something random into a text box to not search for a word.
eg filter by all
+ Alarm
+ Hi
+ Lo
+ Standby
eg filter by Hi 'only'
- Alarm
+ Hi
- Lo
- Standby
Is it possible to do what I am trying to do? Any help appreciated.
Current SQL for Report:
select * from
select DATE, MICROSEC, DEV_KEY, ALM_TEXT
from ALARMS@dblink
where DATE >= :P17_DATEFROM
and DATE < :P17_DATETO
and DEV_KEY like :P17_SITE||'%'
and DEV_KEY like '%'||:P17_DK1||'%'
and DEV_KEY like '%'||:P17_DK2||'%'
and DEV_KEY like '%'||:P17_DK3||'%'
and ALM_TEXT like '%'||:P17_AI1||'%'
and ALM_TEXT like '%'||:P17_AI2||'%'
and ALM_TEXT not like '%'||:P17_E1||'%'
and ALM_TEXT not like '%'||:P17_E2||'%'
and ALM_TEXT not like '%'||:P17_E3||'%'
and ALM_TEXT not like '%'||:P17_E4||'%'
and ALM_TEXT not like '%'||:P17_E5||'%'
and ALM_TEXT not like '%'||:P17_E6||'%'
)

figured out a way to do it. Put each of Alarm, Hi, Lo and Standby in their own select list with the other option as '-----' with output value as some string that will never appear in the field.
If anyone knows how to do it with checkboxes though i'm all ears.

How to Add a Servlet Filter to Reports 11.1.1.2.0

I am running Fusion Middleware 11g (Weblogic 10.3.2), with Oracle Forms/Reports 11.1.1.2.0. The installation is running the default managed servers WLS_FORMS and WLS_REPORTS.
How can I add a Servlet Filter to the Reports 11.1.1.2.0 application which is running under the WLS_REPORTS managed server?
I have read the Oracle Doc ID: 418366.1, which describes a process for adding a servlet filter to Reports Developer 10.1.2.2, but I am unclear as to which web.xml file I need to modify in weblogic and where to place the class file for the servlet filter.
Thanks in advance for your help.

I can provide some partial help.
The set up I have was running it locally on Windows 7 (64 bit) laptop and running the reports server (version 11.1.1.4) in XP Mode as part of Windows 7 Professional.
To find which web.xml file to change, I searched the directories for web.xml and then removed then renamed the web.xml files to something else to see which impacted the start up of the reports server.
It turns out it was a web.xml file in web.war file in the following directory which impacted the start up:
C:\Oracle\Middleware\user_projects\domains\ClassicDomain\servers\WLS_REPORTS\tmp\_WL_user\reports_11.1.1.2.0\1ww4ab
So used winzip to extract files, update web.xml file and and java class as a jar file in the WEB-INF\lib directory and zipped back up to a web.war and put it in the above directory and restarted the Reports Server.
Note the url pattern I used was slightly different to that shown in the oracle note (forward slash before asterix):
<url-pattern>/rwservlet/*</url-pattern>
Have not investigated how to do in for a production environment, but hopefully this information is of use.
Les.

Regarding Filter in Webi Report which is based on BEx query

Hi,
I am developing Webi report, in which using universe which is baed on BEx query.
Suppose BEx query contains filter on fiscal year 2010.
And I am developing Webi report on that query. So I want to know, whether my Web i report output will contain data of only fiscal year 2010, as filter is applied in BEx query.
Thanks,
Pradip Nikam

Hi,
if this is a fixed filter the data will be filtered.
if this is a variable in the BW query the user will get prompted.
ingo

Report using narrative to filter another report

I am trying to build a report that will be embedded in the campaign object. I want the report to display the campaign recipients for the campaign record, using detailed inforamtion from the contact record.
I have built a report that contains the relevant contact data that needs to be displayed.
I have built a second report that will be embedded in the campaign record that has a column displaying the contact id of the campaign recipients. The report will have a filter for campaign id 'is prompted' but for testing I have hard coded a campaign id with a total of 469 campaign recipients.
I have included a narrative in the layout. The report correctly displays, however the prompt does not seem to work. All contacts are included in the report, rather than the 469 contacts limited by the campaign ID filter.
The narrative I have used is
<iframe src=https://secure-ausomxxxx.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=%2fusers%2fanqa-djlqt%2fCampaign+Recipient+-ContactInfo&Options=&Action=Navigate&p0=1&p1=eq&p2=Contact.%22Contact+ID%22&p3=@1 frameborder =0 width="100%"></iframe>
Rows to display is set to 1
Earlier attempts I included a contact id is prompted filter on the report included in the narrative, however that brings back one value only. I can change the rows to display to 5 for example, however it gives me 5 contacts in separate reports rather than a list report.
Any help would be great.

Hello Mel,
My understanding is that you are trying to display the contact and their details for the particular campaign. Since these details are not available in the Campaign Subject Area you are using the narrative view.
I would suggest you can use the Contact Subject area to populate the campaign id and campaign name along with the Contact details and embed this report in the Campaign page by prompting the Campaign Id.
Let me know if this works else please explain the requirement once again and I would be able to help you.
Regards,
Paul Swarnapandian

How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

Hope someone can help. I have tried to find the best way to do this and can't seem to make sense of anything. I'm using an Access 2013 Database and I have a report that is based on a query. I've created a Report Criteria Form. I
need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date. I then need my report to return only the records that meet all selected criteria. It works fine with a ComboBox and 1 selection but can't
get it to work with a List Box so they can select multiple items. Any help is greatly appreciated while I still have hair left.

The query should return all records.
Let's say you have the following controls on your report criteria form:
txtStart: text box, formatted as a date.
txtEnd: text box, formatted as a date.
lbxMulti: multi-select list box.
cmdOpenReport: command button used to open the report.
The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
The report to be opened is rptReport.
The On Click event procedure for the command button could look like this:
Private Sub cmdOpenReport_Click()
Dim strWhere As String
Dim strIn As String
Dim varItm As Variant
On Error GoTo ErrHandler
If Not IsNull(Me.txtStart) Then
strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
End If
If Not IsNull(Me.txtEnd) Then
strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
End If
For Each varItm In Me.lbxMulti.ItemsSelected
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
Next varItm
If strIn <> "" Then
' Remove initial comma
strIn = Mid(strIn, 2)
strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
End If
If strWhere <> "" Then
' Remove initial " AND "
strWhere = Mid(strWhere, 6)
End If
DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
Exit Sub
ErrHandler:
If Err = 2501 Then
' Report cancelled - ignore
Else
MsgBox Err.Description, vbExclamation
End If
End Sub
If SomeField is a text field instead of a number field, change the line
strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
to
strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Regarding Balance sheet report

Hello,
I want to create a balance sheet report as on all the periods of the fiscal year.
Like. the output should have:
Balance sheet as on April2009,Balance sheet as on May2009,Balance sheet as on Junel2009......
And this all should reflect in one report with different coloumns.
So how should i achieve this.
Regards,
Pratighya

Hi,
Create a structure for all keyfigures in columns. Drag and drop the time characterstic calendar year/month above that
structure.
Place the G/L account characterstic in rows.
In filter restrict the G/L account infobject to specif hierarchy nodes and restrict the calendar year/month to user entry
mandatory variable (range).
Let me know if you want more information.
Regards
Prasad

Text Will Not Filter in Report

I'm trying to filter a table object in SSRS by passing only certain values to it. I'm using the IN clause with the SPLIT() function in the filter and for the most part it works okay. However, i'm trying to pass a string which has a "%"
character in it and it will not return. When I run the report without any filtering it shows up. Everything I try regarding escaping the "%" doesn't work - how can I get this to return?
Here's what i'm trying to pass into the filter -
=SPLIT("Tickets Received, Tickets Resolved, % Tickets Resolved by EOW", ",")
The "% Tickets Resolved by EOW" is not showing up, and YES there is data for it using the my test parameters.
How can I do this?

Wow, that's weird. I also just entered all of the comma-separated text wrapped with quotes into the text field without using the SPILT() function and it worked. Like this -
"Tickets Received", "Tickets Resolved", "% Tickets Resolved by EOW"
Frustrating. However it's nice to know that I can do this either way, going to make note of it.
Thanks!!

Best way of making filter in report!

I have a report! And I need make some filter tool!
What is the best way to do this? Is there any APEX tools to do this?
Regards,
Kostya

I have a report! And I need make some filter tool!
What is the best way to do this? Is there any APEX tools to do this?
Regards,
Kostya

Need to create filter in reports

hi ,
i need to create a filter on my report .
the filter for field contract end date.
for exammple - the object which i need to create the filters (HDREN_DT -
Remove records with value < System Date
) this is the logic so what i need to do i want to go for customer exit or what
need to create 2 CKF
Earliest Doc Header End Date Calculated KF Min (HDREN_DT)
Oldest Doc Header End Date Calcualted KF Max (HDREN_DT)
Can anyone give some idea how can i go with this one.
i choosen a formula variable with replacement path for the both the fields. whether this option is right or wrong.
please help me in this one
Regards ,
vijju

Hi,
You have correctly identified.
To achieve the filter on HDREN_DT, you can declare an exit variable & write the code behind. But here I'd suggest implementing logic like Date greater than or equal to System date (instead of removing dates less than System date as it will improve the querying.
For the 2 CKFs, you can try the formula variable concept.
--Akash

Regarding Filter Option in ALV LIST

Hi,
I am using LIst to display the report output.
The filter is not allowing me to perform the function.
The filter Criteria is giving out dump saying An ASSIGN statement in the program "SAPLSDH4" contained a field symbol with
length 0. This is not possible.
Please help me to resolve this.
Thanks & Regards,
Priyanka.

Hi,
Don't pass total property to fieldcatalog..
Regards,
Kumar

Default Show Filter Interactive Report

Hi,
When going to a page that has an Interactive Report is it possible to have the filter shown by default.
I have a page that is accessed via a modal popup that contains an Interactive Report that is used as a filter for the original page so when the user goes to that page all the user will do is add filters so I want to display the filter option by default.
Thanks in advance.

Hi,
Easiest way is use from Google.
Add to page HTML header or page template header before #HEAD# substitution
<script type="text/javascript" src="https://www.google.com/jsapi"></script>
<script type="text/javascript">google.load("jquery","1.4.4");</script>Alternative see e.g. this
http://www.oracleapplicationexpress.com/tutorials/66
Regards,
Jari

Regarding:- Filter on Reports

Similar Messages

Maybe you are looking for