Regarding HTTP server

I would like to know whether HTTP server comes along with the Oracle 10g Database or we need to install it seperately.

Hello Ashir,
In case you still need an answer to your question:
HTTP server is on Oracle Database 10g Companion CD, you can install it from there.
Thanks,
DanielD

Similar Messages

HTTP Server TimeOut settings & its Impact

Hello Guys,
We are using OracleAS 10g 9.0.4 on Windows-2000 SP-4. The J2EE enabled application is deployed and and being accssed via web browser. It was done by one of my fellow member who is not with us now. I have some doubt regarding HTTP Server which is available in 10gAS. COuld anybody just help me out....I am regferring Docs. but not able to get it for me...
1. The TimeOut in HTTP Server. What does it mean and if i increase this value...what impact we may have on HTTP request etc.
2. Difference between Port and Listen.? Do we use both of them.?
Please help.
Regards,
Kamesh Rastogi

Hi Kamesh!
From the manuals:
Timeout:
The Timeout specifies the amount of time Apache will wait for a GET, POST, PUT request and ACKs on transmissions. You can safely leave this option on its default values.
Listen:
The Listen directive instructs Apache to listen to more than one IP address or port; by default it responds to requests on all IP interfaces, but only on the port given by the Port directive.
Port:
The Port directive has two behaviors, the first of which is necessary for NCSA backwards compatibility (and which is confusing in the context of Apache).
* In the absence of any Listen or BindAddress directives specifying a port number, a Port directive given in the "main server" (i.e., outside any <VirtualHost> section) sets the network port on which the server listens. If there are any Listen or BindAddress directives specifying :number then Port has no effect on what address the server listens at.
* The Port directive sets the SERVER_PORT environment variable (for CGI and SSI), and is used when the server must generate a URL that refers to itself (for example when creating an external redirect to itself). This behavior is modified by UseCanonicalName.
The primary behavior of Port should be considered to be similar to that of the ServerName directive. The ServerName and Port together specify what you consider to be the canonical address of the server. (See also UseCanonicalName.)
Have a look at
http://httpd.apache.org/docs/1.3/mod/core.html
cu
Andreas

HTTP Server fails to starts during E-Business installation

Hello All,
I am having issues installing e-business suite 12.1.1 on Oracle Linux 6.2.
I have applied all the correct packages (and a couple that were not listed in the installation instructions), applied required patches, upgraded the startCD version to the latest, run the md5sum checks on the Stage directory, and a bunch of manual stuff which it doesn't tell you to do in the installation notes, but you have to do to make it work, e.g. linking unzip 5.x from the startCD to /usr/bin/unzip. I thought that I had it cracked until it failed at the last HTTP Server checks.
I have attempted to restart services manually but it appears as though the HTTP server cannot start due to a missing library libdb-4.3.so:
HTTP_Server~1.log
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
*/u01/applR12/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb-4.3.so: cannot open shared object file: No such file or directory*
There was another post where a similar issue was resolved in a OEL 5 x86.x64 install by applying a i383 gdbm package, and linking the existing library as the document id which you posted suggested.
This package cannot be applied, as I have attempted.
I then started to look for the library which is reported in the logs as being missing, i.e. libdb-4.3.so. This does not appear to exist for OEL 6.
I then looked further afield and found a Centos 6.2 rpm which contained this library. I extracted this and linked it to the libdb.so.2 (patch 6078836).
I am getting the following from the adstrtal.log (I ran the cat command as root not adstrtal.sh which I ran as the application user):
*# cat /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adstrtal.log | grep Failed*
Web Application Services OACORE OC4J Instance <SID>_<HOST> adoacorectl.sh Failed
Web Application Services FORMS OC4J Instance <SID>_<HOST> adformsctl.sh Failed
Web Application Services OAFM OC4J Instance <SID>_<HOST> adoafmctl.sh Failed
This is different to what I was seeing previously where all a 4 Web Application Services had failed
*# cat /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adstrtal.log | grep -v "status 0" | grep status*
adoacorectl.sh: exiting with status 150
adformsctl.sh: exiting with status 150
adoafmctl.sh: exiting with status 150
ServiceControl is exiting with status 3
Looking at the respective log files I am seeing the following:
adoacorectl.txt
*06/27/12-07:35:10 :: adoacorectl.sh version 120.13*
*06/27/12-07:35:10 :: adoacorectl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:10 :: adoacorectl.sh: Starting OPMN managed OACORE OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:10 :: adoacorectl.sh: exiting with status 150*
*================================================================================*
adformsctl.txt
*06/27/12-07:35:11 :: adformsctl.sh version 120.16*
*06/27/12-07:35:11 :: adformsctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:11 :: adformsctl.sh: Starting OPMN managed FORMS OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:11 :: adformsctl.sh: exiting with status 150*
*================================================================================*
adoafmctl.txt
*06/27/12-07:35:11 :: adoafmctl.sh version 120.8*
*06/27/12-07:35:11 :: adoafmctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-07:35:11 :: adoafmctl.sh: Starting OPMN managed OAFM OC4J instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-07:35:11 :: adoafmctl.sh: exiting with status 150*
*================================================================================*
Running adapcctl.sh by itself I am seeing the same issue reported in the log files:
*$ ./inst/apps/<SID>_<HOST>/admin/scripts/adapcctl.sh start*
You are running adapcctl.sh version 120.7.12010000.2
Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
adapcctl.sh: exiting with status 0
adapcctl.sh: check the logfile /u01/applR12/inst/apps/<SID>_<HOST>/logs/appl/admin/log/adapcctl.txt for more information
Looking at the log file I can see the following:
*06/27/12-08:15:27 :: adapcctl.sh version 120.7.12010000.2*
*06/27/12-08:15:27 :: adapcctl.sh: starting OPMN if it is not running*
opmnctl: opmn is already running.
*06/27/12-08:15:27 :: adapcctl.sh: starting OPMN managed OHS instance*
opmnctl: starting opmn managed processes...
*================================================================================*
opmn id=<HOST>:6200
no processes or applications matched this request
*06/27/12-08:15:27 :: adapcctl.sh: exiting with status 0*
*================================================================================*
I have attempted to restart opmn using adopmnctl.sh, which was unsuccessful. Looking at the HTTP_Server~1.log I can see the following the error:
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
*/u01/applR12/apps/tech_st/10.1.3/Apache/Apache/bin/httpd: error while loading shared libraries: libdb-4.3.so: cannot open shared object file: No such file or directory*
Has been replaced by the recurring message:
*/u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/bin/apachectl startssl: execing httpd*
Syntax error on line 264 of /u01/applR12/inst/apps/<SID>_<HOST>/ora/10.1.3/Apache/Apache/conf/httpd.conf:
Cannot load /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so into server: /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so: undefined symbol: dbm_firstkey
Looking at line 264 of httpd.conf I can see the following:
LoadModule ossl_module libexec/mod_ossl.so
Which looks fine when compared to the rest of the file.
I am not able to look at the /u01/applR12/apps/tech_st/10.1.3/Apache/Apache/libexec/mod_ossl.so.
I do not know where else to go with this now. Any guidance which you could provide would be very much appreciated.
Regards,

Hello Hussein,
Thank you for getting back to me! As per the installation instructions it states the following:
# cd /usr/lib
# ln -s libdb-4.7.so libdb-4.3.so
However there is no libdb-4.7.so library there to link to.
I have installed the db4 i686 & x86_64 packages which contain this library, then performed the above. I then ran the adstrtal.sh command which completed without incident.
As such the Required Packages in the installation instructions should be updated to include the following:
db4.i686
db4-devel.i686
db4.x86_64
db4-devel.x86_64
Regards,

How to deal with deadlock on wwv_flow_data table when http server times out

There are some threads about a deadlock on the wwv_flow_data table. None of them contain a real explanation for this behaviour. In my case I will try to explain what I think is happening. Maybe it helps somebody who is hitting the same matter.
In my case with APEX 3.2.1 I am navigating from one page to another. Doing this APEX will lock the table wwv_flow_data. As soon as the other page is shown the lock will be released. But now this other page contains a bad performing query (standaard report region). After 5 minutes the http server (modplsql) will time out and present the message "No response from the application server" on the screen. In the meanwhile the query is still running on the database server and the lock stays on the wwv_flow_data table.
Normal user behaviour will be that the user will use the back button to return to the previous page and tries it again to navigate to the other page or
the user will try to refresh the page with the bad performing query.
And voila now you will have a deadlock on the wwv_flow_data table since a second session is trying to do the same thing while the first hasn't finished yet.
How to deal with it?
First of all. Have a good look at the bad performing query. Maybe you can improve it that it will succeed before the http server will timeout.
In my case the 11gr1 optimizer couldn't handle a subquery factoring clause in the best way. After changing it back to a classical inline query the problem was solved.
Secondly you could increase the timeout parameter of the http server. Although this not the best way.
Maybe it would better if APEX in a next version would release the lock on the table wwv_flow_date earlier or do a rollback just before the moment that the http server is timing out.
regards,
Mathieu Meeuwissen

Hello Shmoove,
I saw your reply here and you probably understand the problems the HTTP 100 response may cause.
I am trying to send image that was taken by getSnapshot. The problem is that the server respond with this HTTP 100 message.
I suspect that the reason that my server doesn't recognize the file that I'm sending from J2me is that the "server to client" response to the 100 message comes after the second message of (see what the TCPIP viewer shows down here):
POST /up01/up02.aspx HTTP/1.1
Content-Type: multipart/form-data; boundary=xxxxyyyyzzz
Connection: Keep-Alive
Content-length: 6294
User-Agent: UNTRUSTED/1.0
Host: szekely.dnsalias.com:80
Transfer-Encoding: chunked
400: Client to Server (126 bytes)
78
--xxxxyyyyzzz
Content-Disposition: form-data; name="pic"; filename="david.jpg"
Content-Type: application/octet-stream
400: Connected to Server
400: Server to Client (112 bytes)
HTTP/1.1 100 Continue
Server: Microsoft-IIS/5.1
Date: Wed, 23 Mar 2005 00:47:02 GMT
X-Powered-By: ASP.NET
Any help will be appreciated,
David

How to configure Oracle HTTP server

Hi, I installed APEX 3.0 in Oracle 10.2.0.2 database. I installed HTTP server from Oracle 10.2.0 database companion CD. The problem is I am not sure which conf file I need to modify as in the installation document, it only shows steps for how to configure HTTP server 9.0.3/11g/Oracle Application Server 10g. Anybody knows where to get the right doc? Thanks.

Hi,
Configure the Oracle HTTP Server (OHS) from the companion CD is the same for other OHS (apart from OHS 9.x where it uses wdbsvr.app).
So just follow the install guide from
4.4 About Configuring Oracle HTTP Server
http://download-west.oracle.com/docs/cd/B32472_01/doc/install.300/b32468/post_inst.htm#BHAGICFJ
Regards,
Sunny Patel.

How to find out the info regarding Solaris, server hang or shutdown.

Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
I

No core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that.

Problem with TREX 7.0 : HTTP Server is not working

Hi all,
I have installed TREX 7.0 recently(Windows XP Pro, with IIS 5.1). I'm having portal installed in the same system(NW04s). After this installation I found that status of httpserver is red, rest all servers are having green status. I checked it in IIS, there also its indicating same(SAP_TREX_02 (Stopped)). I tried to connect http://<host-name>:30205/TREXHttpServer/TrexIsapiExt.dll, but its giving error as,
Error occurred when connecting to the server!
Description: Can't connect to the server.
Server: <host-ip>:30205
Additional info: Error code: 10061
Proxy+ 3.00 (Build #232), Date: Wed, 07 May 2008 19:11:59 GMT
I'm not able to get why http server is not able to get up. Please help me to resolve this problem. Waiting for some quick response.
Thanks in advance,
Ganpati Jha

Hi,
do you configured TREX server in EP ?
You must configure the TREX name server in Visual Admin, to point to TREX.
Your error message say "Server: <host-ip>:30205", what is <host-ip>? I think that is the problem, it must be your server name.
Check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/c7/e0d13f7fb44c21e10000000a1550b0/frameset.htm
(restar cluster after this)
regards,
Leandro
Edited by: Leandro Balboni on May 7, 2008 8:01 PM

APEX 3.1.2 / HTTP-Server 10g PDF-Printing included

Hello together
I have APEX running on the Oracle HTTP-Server 10.1.3. Apex is working. Now i want to integrate PDF-printing. I found a lot of HowTos to realize that with a separate OC4J-Installation in an new $ORACLE_HOME.
Has anybody an Installation running with OC4J intergrated into the HTTP-Server (startable,stopable wirh opmnctl) ? Or an idea how to get that running ? Or a better Idea to print PDFs from APEX ?
Regards from Switzerland

Hello,
Carl Backstrom blogged about using Cocoon and Tomcat to integrate PDF-printing: http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html
Cocoon should be installable on an OC4J instance.
Another alternative is using PL/PDF: http://www.plpdf.com/
Hope this helps,
Dirk

Companion CDs for 64-bit Oracle HTTP Server for AIX5L(64 bit) required.

I need Companion CDs for 64 bit Oracle HTTP Server for AIX5L(64 bit).
I tried to install using
as_ibm_aix_companion_101300_disk1.cpio & as_ibm_aix_companion_101300_disk2.cpio
but when i checked the files present in <Oracle_Home>/ohs/lib , they are of 32-bit.
Also i tried with Oracle 10.1.2.0.2 but still the server is installed as 32-bit.
Is 64-bit Oracle HTTP Server supported on AIX5L(64 bit) ?
If yes, then from where can i download the CDs?
Any suggestions will be appreciated.

Greetings,
Try this link:
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201aixsoft.html
Regards,
Bill Chadbourne

How to upload a file on HTTP server

Hi All,
I am porting a flex project to HTML5 where I need to upload a file on HTTP server.
I do google and tried to find out a solutions.
I could see following article on HTTP upload
https://developer.tizen.org/dev-guide/2.2.1/org.tizen.web.appprogramming/html/tutorials/w3 c_tutorial/comm_tutorial/uploa…
Uploading Files using AJAX | Holyhoehle's Blog
File uploads using Node.js: once again | Componentix blog
All article make use of file object for uploading.
Unfortunately I do not have file object but have complete file path.
is it possible to upload a file without showing a file selection dialog or without doing drag/drop.?
Please help me in right direction for HTTP upload.
Regards,
Alam

If you have a file path, you can read file like Base64 string:
var fileStr = window.cep.fs.readFile(filePath, window.cep.encoding.Base64).data;
then you can send this Base64 string to server. I'm using xmlhttpReguest for sending data to server (i'm using JSON format).
And save file on server (Base64 string).
window.cep.fs... functions - for working with File System. (read, write ...)
Example for working with files - demo where to find it?
CEP APIs information - Adobe CEP APIs | Adobe Developer Connection

HTTP server code 500 reason Internal Server Error explanation Error during

Hi,
I am trying to connect to SAP TM (Tranportation Management) System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP TM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP TM on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Kiran

Error during parsing of SOAP header
Can you mention what are the settings done in Receiver HTTP channel.....the request that you send to target is not in proper format.
One reason could be incorrect Content Type.....is it text/XML ?
Regards,
Abhishek.

Oracle service, Listener and http server does not start automatically

Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.

Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar.

Solved!!Error when starting HTTP Server

Hi againg
When restarting the HTTP Server I receive the following error
HTTP Server.      Using Web Configuration View
JVM:           Java Virtual Machine initialized
HTTP Server:     Java Virtual Machine Loaded
DSAP Filter SAP Ticketcerifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only initializing
Cannot find NOTES.INI variable MySapDebug, Debug is turned off
Using NOTES.INI variable MySapPsePath = c:\domino\sap\verify.pse
Cannot find NOTES.INI variable mySapView. Using default settings:$Users
Cannot find NOTES.INI variable MySapSuppressEmptyTicketWarning. Default is used (warning messages are written to the log)
DSAP Filter SAP Ticketverifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only started
HTTP Server: DSAPI SAP Ticketverifier V2.5.2 PRE-RELEASE for Lotus Domino R6 only Load successfully
Servlet engine initialization was successful
SAP Ticketverifier: invalid ticket
SAP Ticketverifier Message: falling back to Lotus Domino Authentication
HTTP Server Started
SAP Ticketverifier: invalid ticket
SAP Ticketverifier Message: falling back to Lotus Domino Authentication
SAP Ticketverifier: invalid ticket
Opened the NOTES.INI file and started to look for the variables of mySapView, and MySapSuppressEmptyTicketWarning, but they are not presented in this file
Need help to start looking for error
Regards
Kay-Arne
Message was edited by: Kay-Arne Aarlie

There are several ways to do this, but for best results on a single installation (versus many), manually add and configure the following SAP TV variables in Notes.ini. Remember to leave a single blank line at the end of the file (a known issue with the last variable not being read):
<b>;===Custom Start===
MYSAPPSEPATH=<your path info goes here>\verify.pse
MySapDebug=<True or False>
MySAPVIEW=<the custom view name, if one is used>
MySapSuppressEmptyTicketWarning=<True or False>
;===Custom End===</b>

Can't open HTTP server socket on port 50000 in dispatcher

We get the following message in the console_log for the dispatcher.
ID000544: Error starting service http. Can't start the service due to java.io.IO
Exception: Can't open HTTP server socket on port 50000
[ServiceManager]: ID000544: Error starting service http. Can't start the service
due to java.io.IOException: Can't open HTTP server socket on port 50000
[Framework -> criticalShutdown] Service http startup error!
Anyone have any ideas what might be the problem?
Thanks,
Keith

Hello Keith,
this errors occurs when the port http 50000 is already taken. Please could you check if this port on your machine is free or an other dispacther instance is already started on same machine. You can change the port in sap j2ee config tool (dispatcher-> services->http)
Best Regards,
Fabrice

Weblogic certificate is not being authenticated in Oracle HTTP Server

I am using Oracle HTTP Server with SSL and mod_proxy set up trying to pass a url through to the weblogic server. I start with my OHS url in the browser and the proxy is switches to the url to weblogic but I get the following error on the OHS side:
[2011-12-22T18:40:09.4683-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-2077] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] nzos proxy handshake error, nzos_Handshake returned 29024(server social.us.oracle.com:443, client 10.139.164.191)
[2011-12-22T18:40:09.4683-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-2171] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] NZ Library Error: Invalid X509 certificate chain [Hint: the client probably doesn't provide a valid client certificate]
[2011-12-22T18:40:09.4685-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] (20014)Internal error: proxy: pass request body failed to 10.139.164.191:7001 (denovm11-1.us.oracle.com)
[2011-12-22T18:40:09.4685-07:00] [OHS] [INCIDENT_ERROR:32] [OHS-9999] [core.c] [host_id: denovm11-6] [host_addr: 10.139.164.196] [tid: 1155799360] [user: root] [ecid: 004hBXzInYHEOPb_THt1ic0007DM000002] [rid: 0] [VirtualHost: social.us.oracle.com:443] proxy: pass request body failed to 10.139.164.191:7001 (denovm11-1.us.oracle.com) from 10.139.164.196 ()
And the following error on the weblogic side:
####<Dec 22, 2011 6:40:10 PM MST> <Warning> <Security> <denovm11-1> <AdminServer> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <8e6c6502a1af117a:4eeee51e:13466bb040d:-8000-000000000000a764> <1324604410502> <BEA-090482> <BAD_CERTIFICATE alert was received from denovm11-6.us.oracle.com - 10.139.164.196. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
Here is my ssl.conf from OHS:
# Oracle HTTP Server mod_ossl configuration file: ssl.conf #
# OHS Listen Port
Listen 443
<IfModule ossl_module>
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# Some MIME-types for downloading Certificates and CRLs
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
SSLSessionCache "shmcb:${ORACLE_INSTANCE}/diagnostics/logs/${COMPONENT_TYPE}/${COMPONENT_NAME}/ssl_scache(512000)"
SSLSessionCacheTimeout 300
# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
<IfModule mpm_winnt_module>
SSLMutex "none"
</IfModule>
<IfModule !mpm_winnt_module>
SSLMutex pthread
</IfModule>
## SSL Virtual Host Context
<VirtualHost *:443>
<IfModule ossl_module>
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional and require.
SSLVerifyClient none
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
SSLCipherSuite SSL_RSA_WITH_RC4_128_MD5,SSL_RSA_WITH_RC4_128_SHA,SSL_RSA_WITH_3DES_EDE_CBC_SHA,SSL_RSA_WITH_DES_CBC_SHA,TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA
# SSL Certificate Revocation List Check
# Valid values are On and Off
SSLCRLCheck Off
#Path to the wallet
SSLWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
BrowserMatch ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
</IfModule>
<IfModule proxy_module>
ProxyRequests Off
<Proxy *>
Order deny,allow
Allow from all
</Proxy>
# Path to the wallet
SSLProxyWallet "${ORACLE_INSTANCE}/config/${COMPONENT_TYPE}/${COMPONENT_NAME}/keystores/default"
SSLProxyEngine on
SSLProxyVerify none
# ottest : denovm11-1
ProxyPass /test https://abc.us.oracle.com:7001/test
ProxyPassReverse /test https://abc.us.oracle.com:7001/test
</IfModule>
</VirtualHost>
</IfModule>
On the OHS side I have all the certificates needed so SSL is working properly. The weblogic environment is currently working fine with other webgates, but those are apache and we are trying to switch to OHS.
Can OHS use mod_proxy to connect to weblogic or do I need to use mod_wl_ohs?
Does anyone see anything wrong in my ssl.conf file in regards to the proxy section.
Thanks in advance.

In summary:
You need to create a new wallet with CSR (certificate signing req)
Send this to your certificate authority and get the signed server certificate.
Now import the signed server cert and the trusted root cert in to the wallet that you created newly.
Modify ssl.conf to point to the new wallet location.
To create wallet refer to : http://docs.oracle.com/cd/E25054_01/core.1111/e10105/wallets.htm#CHDGIJDC
Further reference: http://docs.oracle.com/cd/E25054_01/core.1111/e10105/sslconfig.htm#CBDGIJDF
Dont mind if this doc is 500 pages ;)

Regarding HTTP server

Similar Messages

Maybe you are looking for