Regarding multiple KJS in iAS 6.0 application server

hi,
Why we have multiple kjs log option in iAS 6.0. How this impacts the server performance or any other issues related to it.
How we can merge multiple KJS to single (any configuration needs to be done).
thanks in advance
mohan.

Hi Karmesh,
As a role of thumb, Oracle does not support any extended shared memory segments on IBM AIX. Please take a look OSS notes #105429, 123366.
Additionally, I would like to suggest that you use dynamic SGA that has been mentioned in OSS note #105429.
What kind of memory, you are talking about, in your last question? Oracle memory tuning or SAP memory tuning?
Regards,
Orkun Gedik
Senior SAP R/3 Basis and Development Consultant
ASTRON

Similar Messages

How to store multiple files from SAp in to Application server?

Hi Guys,
 Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
 Any Logic or Code for how to do is welcomed.
 plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
 DIRNAME(200) TYPE c, " name of directory.
 sp_name(100) TYPE c," name of entry. (may end with *)
 END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
 dirname(75) TYPE c, " name of directory.
 aliass(75) TYPE c, " alias for directory.
 svrname(75) TYPE c, " svr where directory is availabl
 sp_name(75) TYPE c, " name of entry. (may end with *)
 sp_cs(10) TYPE c, " ContainsString pattern for name
 END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = in_file
 "FILETYPE = 'BIN'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = ' '
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
TABLES
 DATA_TAB = itab
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
 TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
 move g_tmp_file_path to in_file.
 h_destin = ''.
 SPLIT g_tmp_file_path at '\' into table itab.
 loop at itab into g_tmp_file_path.
 h_destin = g_tmp_file_path.
 endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
 EXPORTING
 tabname = '/BI0/PCO_AREA'
 lfieldname = 'CO_AREA'
 IMPORTING
 dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'SP_NAME'
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'destin'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = searchpoints
 FIELD_TAB = lt_dfies
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
 WHEN 'ORA'.
 CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
 MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'ADA'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
 MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'INF'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
 MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
 APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
 WHEN 'DB6'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
 IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
 MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 ELSE.
 EXIT.
 ENDIF.
 WHEN OTHERS.
 EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = sy-uname.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = 'all'.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
 PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
 DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
 CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
 ID 'VALUE' FIELD programfiles_path.
 IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
 CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
 ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
 CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
 ENDIF.
 CONCATENATE programfiles_path '\SAP\hostctrl'
 INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
 searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
 ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
 IF sy-opsys = 'Windows NT'.
 searchpoints-dirname = '.\'.
 ELSE.
 searchpoints-dirname = './'.
 ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
 ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
 h_ind = sy-tabix.
 IF searchpoints-sp_name IS INITIAL.
 DELETE searchpoints INDEX h_ind.
 ENDIF.
ENDLOOP.
ENDFORM.

Regarding Upload of data into SAP from Application server using DATA SETS

Hi all,
I have a problem when uploading data that is application server [.txt file] into SAP using OPEN DATA SET,READ DATA SET & CLOSE DATA SET it is now going to dump. The file is actually splits the fields by using Tab Delimiter.
During uploading some junk values are coming with '#' so it going to dump and giving follow type of error.
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Unable to interpret "#0#0#0#0#0#0#0#" as a number.
Can any one solve the above issue as i need it urgently.
Thanks in advance.
Thanks & Regards,
Rayeezuddin.

Hi Hielman,
Thnaks for that reply and for effort you are putting to solve my issue.
I had done the same thing what u have posted prior to your reply but still i am getting dump.
FORM f_get_legacy_data .
DATA: l_tab type xstring,
 l_tab1(1) type c,
 s type x.
move '23' to l_tab.
move l_tab to l_tab1.
OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
OPEN DATASET v_pfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc <> 0.
 MESSAGE text-207 TYPE c_e.
ELSE.
DO.
 CLEAR wa_input1.
 READ DATASET v_pfile INTO wa_input1.
 READ DATASET v_pfile INTO wa_read.
 IF sy-subrc EQ 0.
 move wa_read to i_txt-txt.
 append i_txt.
 ELSE.
 EXIT.
 ENDIF.
ENDDO.
s = '09'.
loop at i_txt.
 move i_txt-txt+10(1) to l_tab1.
 move '#' to l_tab1.
 split i_txt-txt at s into wa_input1-vbeln wa_input1-posnr
 split i_txt-txt at '#' into wa_input1-vbeln wa_input1-posnr
 wa_input1-per0bal wa_input1-per1val
 wa_input1-per2val wa_input1-per3val
 wa_input1-per4val wa_input1-per5val
 wa_input1-per6val wa_input1-per7val
 wa_input1-per8val wa_input1-per9val
 wa_input1-per10val wa_input1-per11val
 wa_input1-per12val.
 APPEND wa_input1 TO i_input1.
 CLEAR wa_input1.
endloop.
ENDIF.
CLOSE DATASET v_pfile.
IF i_input1[] IS INITIAL.
If there is no data in the legacy file or if the structure of the
legacy data does not match with that of internal table error message
need to be displayed.
 MESSAGE text-211 TYPE c_e.
*&--begin of change--
ELSE.
 CLEAR: wa_input, wa_input1.
 LOOP AT i_input1 INTO wa_input1.
 MOVE wa_input1 TO wa_input.
 MOVE: wa_input1-vbeln TO wa_input-vbeln,
 wa_input1-posnr TO wa_input-posnr,
 wa_input1-per0bal TO wa_input-per0bal,
 wa_input1-per1val TO wa_input-per1val,
 wa_input1-per2val TO wa_input-per2val,
 wa_input1-per3val TO wa_input-per3val,
 wa_input1-per4val TO wa_input-per4val,
 wa_input1-per5val TO wa_input-per5val,
 wa_input1-per6val TO wa_input-per6val,
 wa_input1-per7val TO wa_input-per7val,
 wa_input1-per8val TO wa_input-per8val,
 wa_input1-per9val TO wa_input-per9val,
 wa_input1-per10val TO wa_input-per10val,
 wa_input1-per11val TO wa_input-per11val,
 wa_input1-per12val TO wa_input-per12val.
 APPEND wa_input TO i_input.
 CLEAR: wa_input, wa_input1.
 ENDLOOP.
ENDIF.
ENDFORM. " GET_LEGACY_DATA
When i am giving input as
Directory /pw/data/erp/D5S/fi/up
Name: Backlog1616_D1S.txt
BKCOPO1 BKSOI1 1000.00 100.00 -200.00 0 0 0 0 0 0 0
BKSOPO2 BKSOI2 2222.22 0 300 0 0 0 0 0 0 0
BKSOPO3 BKSOI3 -3000 400 0 0 0 0 0 0 0 0
BKSOPO4 4000.55 500 600 0 0 0 0 0 0 0
0040000000 000010 -100 -110 -110 0 0 -600 0 0 0 0
0040000001 000010 -110 -110 0 0 0 -610 0 0 0 0
I am getting i_input internal table populated as follows at the end of that subroutine.
After appending [APPEND wa_input TO i_input].
BKCOPO1#BK|000000| 0.00 | 0.00 | 0.00 |
BKSOPO2#BK|000000| 0.00 | 0.00 | 0.00 |
BKCOPO3#BK|000000| 0.00 | 0.00 | 0.00 |
BKCOPO4##4|000000| 0.00 | 0.00 | 0.00 |
0040000000|000000| 0.00 | 0.00 | 0.00 |
0040000001|000000| 0.00 | 0.00 | 0.00 |
And output is showing erronious records: 6
No entries inserted.
Can you solve this issue.

Report Path in Application Server

Can we have multiple paths for .rfd files in Application server 9ias? Actually we have two separate applications. We wanted to keep .rdf files in separate folders on app server. Is there a way when we run one application, it should check rdf files from one folder and for second application, check from second folder.
Thanks

Hi,
This is possible in Reports9i patch 1 onwards. You can use a feature called Dynamic Environment Switching. You can define 2 environments in the Reports Server Config file (each with a different REPORTS_PATH). At runtime, you have to specify the ID that identifies your environment. Pl see Patch 1 (or later) release notes:
http://otn.oracle.com/documentation/reports.html
Navneet.

How do I add a selection screen parameter to get a application server file

Hi All..
Can you please suggest how can we add a selection screen parameter to get a application server file ?
Thanx in Advance...
Regards,
Deepak

Parameter def :
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 02(30) text-005 FOR FIELD p_xlfil.
PARAMETERS: p_xlfil LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Browse
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xlfil.
PERFORM ws_get_filename USING p_xlfil.
FORM ws_get_filename USING p_xlfil.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_path = 'C:'
 mask = ',Excel,*.xls,All,*.*.'(100)
 mode = 'O'
 title = 'Title'(101)
 IMPORTING
 filename = p_xlfil
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0.
 CLEAR p_xlfil.
ENDIF.
ENDFORM. " WS_GET_FILENAME
Regards
Oops i did not read "application server"
Use FM F4_FILENAME_SERVER and not F4_FILENAME/WS_GET_FILENAME.
Message was edited by:
 Raymond Giuseppi

Application Server Specs

How to spec out the Application Server 10g Machine ?
If we need to support x number of clients.
or
if we need to add more users in an already running server is there any algo/formula to add 'y' RAM to the server to support 'x' number of users.
Regards
Adnan Siddiqui

How to spec out the Application Server 10g Machine ?
If we need to support x number of clients.
or
if we need to add more users in an already running server is there any algo/formula to add 'y' RAM to the server to support 'x' number of users.
Regards
Adnan Siddiqui

Moving files in application server

Hello Everyone,
Is it possible to move all files from one directory to another directory in application server?
My requirement is like this:
I want to move all files present in one directory (Let's say A) to another directory (Let's say B) in application server.
I pick one by one each file from directory A, process it by ABAP program and then wants to move the same file into directory B.
When all the files moved to directory B, directory A should be empty with no files.
Kindly let me know if anyone comes across this scenario.
Waiting reply in anticipation.
Regards,
Tarun

hi,
Get all the files from application server directory using function module EPS_GET_DIRECTORY_LISTING.
To move the file to archive directoryuse FMs 'PFL_COPY_OS_FILE'
To Delete 'EPS_DELETE_FILE'.
Regards
Sudheer

10g Application Server 10.0.3 Topology

Hi, all!
Could anyone tell me if there's a place where I can find information regarding the new JMX feature for 10g Application Server? It would also be useful to know about topology (clustering,...) and scalability.
Thanks in advance!
Ana Luc�a Medina

Thanks jm.
But when i tried to check from otn downloads there is a 64 bit deployment version available for itanium processors which we are not able to install on xeon processors. Anyways i installed the 32 bit version of 10G 10.1.3 on 64 bit and its working fine. Can you find out if there is any memory consuption for the 32 bit server when installed on 64 bit windows server
thanks once again for your promt reply

Application Server Control Console

I am trying to change my administrator's password in the OC4J server..
The response message was:
This option has been deprecated.Please start the OC4J server to set the administrator's password. If the OC4J administrator accound has already been activated, use the Application Server Control Console or the Admintool to change the password for this account.
How can i access the Application Server Control Console or Admin Tool?
What is the exact path?
Im stuck in here please help...

Hi Hussein,
according to the note
NOTE : Using AS Control with EBiz R12 is NOT FULLY SUPPORTED.
so i would not want to activate it.
would you please give me advice on the note below note.
i am upgrading ebs r12 12.0.6 to r12 12.1.1
in the process, if my ebs r12 using EJB then i must undeploy the application first before before applying the patch.
---How do i know if EBS r12 12.0.6 using EJB or not ???
Thanks for your help.
Regards,
Tom
5.1.2 Apply Oracle Application Server 10g Release 3 (10.1.3) Patch Set 4
(10.1.3.4.0)
The following procedure describes how to apply the patch set:
1. If you are applying 10g Release 3 (10.1.3) Patch Set 4 (10.1.3.4.0) to a 10g
Release 3 (10.1.3.0.0) Oracle home and your system uses Enterprise Javabeans
3.0 applications, then you must undeploy your applications before applying
the patch.
This step is not necessary if you are applying the patch set to a 10g Release 3
(10.1.3.1.0) or 10g Release 3 (10.1.3.2.0) Oracle home.
The following procedure describes how to undeploy the applications:
a. Log in to the Application Server Control Console as the same user name
as the one used for the original installation. If the application is deployed
to a specific OC4J instance, then navigate to the OC4J Home page for the
See Also: "Introduction to Backup and Recovery" in the Oracle
Application Server Administrator's Guide for complete information
about Oracle Application Server Backup and Recovery.
11
OC4J instance. If the application is deployed to a group, then navigate to
the Group page.

SEFAUtil and Trusted Application Server

Morning,
I'm trying to determine if it is acceptable / best practice to install Group Call Pickup functionality on a FE server; ie the trusted application server. I have read numerous blogs that say it is not good practice to install the trusted application server
for group call pickup on one of your Front Ends, but can find no reference to this anywhere from Microsoft.
I have searched through the entire CHM file for Lync 2013 and can only take away the below references regarding supportability;
"You can collocate a trusted application server with the Front End Server."
This says to me its ok, and there's nothing anywhere else in the documentation to suggest otherwise.
So regarding Group Call Pickup and the installation of a Trusted Application Server, can anyone advise on why I shouldn't install this on an FE?
Ta.

Thanks Thamara, I'm just struggling to see why (in a 300 user deployment for example) on a standard edition FE I can't drop the trusted application on that same server, and instead need to provision another server 'just' for group call pickup.
Why wouldn't I be able to ask MSFT to troubleshoot any issue for me? It states below that it is supported for collocation in an Enterprise deployment
http://technet.microsoft.com/en-us/library/gg398102.aspx
and again for standard edition collocation;
http://technet.microsoft.com/en-us/library/gg398131.aspx
If someone was to ask me for a technical reason why I shouldn't do this, I can't give them one - that's my problem. If there was an element of risk, wouldn't MSFT state so much like they do with collocation of Backend databases with other databases - ie
supported but not recommended?

Fetching of multiple files from Application Server into SAP Program

Hi All,
I have a issue related Fetching of multiple files from Application Server into SAP Program.
Actual issue is as below.
In the selection screen of my program i will give Application Server Path as :
/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*
Then the based on above input it should pick up all the files that are matching eppi0720* criteria.
Suppose if i am having 5 files with above scenario, i have to fetch all those 5 files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.

If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
 default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
 name_of_file(260) type c,
 name_of_path(1285) type c.
data: begin of file_list occurs 100,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file_list.
data: begin of file,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file.
call 'C_DIR_READ_FINISH' " just to be sure
 id 'ERRNO' field file_list-errno
 id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
 id 'FILE' field p_file
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
 sy-subrc = 4.
 exit.
endif.
* Read the file list and add to internal table.
do.
 clear file.
 call 'C_DIR_READ_NEXT'
 id 'TYPE' field file-type
 id 'NAME' field file-name
 id 'LEN' field file-len
 id 'OWNER' field file-owner
 id 'MTIME' field file-mtime
 id 'MODE' field file-mode
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
 if sy-subrc = 1.
 exit.
 endif.
 append file to file_list.
enddo.
* Write out the file list
loop at file_list.
 write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman

How to create the user on Internet Application Server(IAS) control console

Hi All,
My Client is asking me for How to create the user on Internet Application Server(IAS) control console 10.1.2( 10g release 2).
If anyone have the document for How to Create the User on Internet Application Server (IAS) console 10g release 2 , then please send me the document and help me out from this Concern.
Regards,
Yadav@intelli.
Edited by: 851080 on Apr 8, 2011 6:31 PM

Are you using OID? Can you provide more details about your iAS environment?

How to implement multiple Value Helps within the same Application ??

Dear Experts,
I want to implement multiple value helps in the same view.For that I have declared exporting parameters of type 'wdy_key_value_table.' within the component controller for each of the value helps.While I do activate and test the application I get the following error :
The following error text was processed in the system HE6 : A row with the same key already exists.
The error occurred on the application server hsdnt24s11_HE6_00 and in the work process 4 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_PO_VIEW1~VALUESET_BSART of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: WDDOINIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_INIT of program /1BCWDY/9VSHJWRNR0EZPKFT3ZKC==CP
Method: DO_INIT of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
I dont know how to implement multiple value helps.Need your help on this.
Regards,
Mamai.

Hi
Hint is : A row with the same key already exists it means , It is assigning the same value/Key to row and you are calling it at WDDOINIT so it giving error at the time of initialization .
Better way to do the coding at some event in view OR if not possible than just execute the first value help in wddoinit later clear all the value before gettig the other Value help. Code it at WdDoModify View to get its run time behaviour.
BR
Satish Kumar

Syncing Forms Across Multiple Application Server Servers?

Hi Guys,
I was hoping someone could point me in the right direction. We recently brought up multiple servers running Application Server 10.1.2.3 for High Availability of our forms and reports. My question is, is there a way to keep the forms files synced? With IIS for example, I have written a batch file that will go check for modifications on a source server and then sync any destination servers that are out of sync. However with Application Server, you cannot simply copy files over because if they are in use they are locked.
Would anyone happen to know of any kind of solution for keeping multiple Application Servers synced?

What we do is use a Load balancer with Multiple App severs. To keep the forms correct we take one out at a time off peak and update and do this round robin until they match.
Best Regards
mseberg

In Oracle 9 Application Server can we create multiple instances???

Hi I need one help this is regarding to the oracle 9 application server in this can we create the multiple instances??
my application was already developed and currently it is working with one instance for this i need to create the another one more instance which is same as existing and my application is web application developed in Forms6i and the db is oracle 9i my requirement is to create one more instance what are all the configuration files need to be modified and please give this info ASAP....

It is still not very clear. What do you mean by creating "one more instance of the same application in the same application server"? By "application" do you mean another instance of OC4J in same Application Server Instance? If yes, you can do that. I mean you can create another OC4J component in same Application Server Instance without doing another installation. Refer this for details:
http://download.oracle.com/docs/cd/A97329_03/core.902/a92171/config.htm#1010793
If you are looking to create another Application Server Instance out of same installation/binaries (i.e. Oracle Home) than the answer is no. You can not create multiple Application Server Instances out of one Oracle Home. You will have to do another installation in a different Oracle Home and that's how you will get another Application Server Instance.
Hope this helps.
Thanks
Shail

Regarding multiple KJS in iAS 6.0 application server

Similar Messages

Maybe you are looking for