Regarding no of rows in table

Hi Guys,
I have requirement to know the no of rows contained in all the tables of a particular database.I have written a PL/Sql script to do this job But there was a little change in the reuirement means now I have to get the tables in the descending order of the row count.
Please suggest me how to proceed I have also attaching the Pl/sql script that I have written .
Please tell me where to modify
DECLARE
v_cnt NUMBER;
v_str VARCHAR2(1000);
BEGIN
DBMS_OUTPUT.PUT_LINE(RPAD('TABLE_NAME',50,' ')||'ROW COUNT');
DBMS_OUTPUT.PUT_LINE(RPAD('----------',50,' ')||'---------');
FOR v_rec IN (SELECT table_name FROM all_tables WHERE owner='TP' AND ROWNUM <=100 ) LOOP
v_str :='SELECT COUNT(*) FROM '||v_rec.table_name ;
EXECUTE IMMEDIATE v_str INTO v_cnt;
IF v_cnt <> 0 THEN
DBMS_OUTPUT.PUT_LINE(RPAD('TP.' || v_rec.table_name ,50,' ')|| v_cnt);
END IF;
END LOOP;
END;
Please help me to modift this to get the tables in the descending order of the rowcount
Thanks ,
Prafulla

SQL> create or replace function count_rows(table_name varchar2)
  2  return number
  3  is
  4    i number;
  5  begin
  6    execute immediate 'select count(*) from '||table_name into i;
  7    return i;
  8  exception
  9    when others then return 0;
10  end;
11  /
Function created.
SQL>
SQL> select table_name
  2  ,      num_rows
  3  from ( select table_name
  4         ,      num_rows
  5         from ( select table_name
  6                ,      count_rows(table_name) num_rows
  7                from   all_tables
  8                --where  owner = 'TP'
  9              )
10         order by num_rows desc
11       )
12  where rownum <= 100;
TABLE_NAME                       NUM_ROWS
SDO_COORD_OP_PARAM_VALS              9829
SDO_COORD_REF_SYS                    4449
SDO_COORD_OPS                        2298
SDO_COORD_OP_PARAM_USE                726
SDO_DATUMS                            536
SDO_COORD_OP_PATHS                    365
<etc>
PENDING_TRANS$                          0
100 rows selected.(Don't forget to uncomment the where clause)

Similar Messages

  • How to delete the row in table control with respect to one field in module pool programming?

    Hi,
    Can I know the way to delete the row in table control with respect to one field in module pool programming
    Regards
    Darshan MS

    HI,
    I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
    I have written this code,
    module USER_COMMAND_9000 input.
    DATA OK_CODE TYPE SY-UCOMM.
    OK_CODE = SY-UCOMM.
    CASE OK_CODE.
         WHEN 'DELETE'.
            LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
                APPEND LS_SOURCE TO LT_RESTORE.
                DELETE TABLE LT_SOURCE FROM LS_SOURCE.
                SOURCE-LINES = SOURCE-LINES - 1.
            ENDLOOP.
    But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
    So I thought of doing with respect to the field.

  • How to get all the index of "selected rows" in table control?

    Hi Gurus,
    I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
    I know that the event for capturing selected row is in PAI.
    I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
    TOP INCLUDE
    YPES: BEGIN OF Y_ZQID_CHECK,
            IDNUM           TYPE ZQID_CHECK-IDNUM,
            WERKS           TYPE ZQID_CHECK-WERKS,
            MATNR           TYPE ZQID_CHECK-MATNR,
            LICHA           TYPE ZQID_CHECK-LICHA,
            LIFNR           TYPE ZQID_CHECK-LIFNR,
            ECOA_S          TYPE ZQID_CHECK-ECOA_S,
            ID_STAT         TYPE ZQID_CHECK-ID_STAT,
            ID_DATE         TYPE ZQID_CHECK-ID_DATE,
            FLAG_MAILCOA(1) TYPE C,
            MARK(1)         TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
           END   OF Y_ZQID_CHECK.
    DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
    PAI
    PROCESS AFTER INPUT.
    * MODULE USER_COMMAND_9004.
    LOOP AT T_ZQIDCHECK_DISCH.
      MODULE READ_TC_DISCH .
    ENDLOOP.
    module READ_TC_DISCH input.
      DATA: W_LINE_SEL TYPE SY-STEPL,
                  W_TABIX    LIKE SY-TABIX.
      GET CURSOR LINE W_LINE_SEL.
      W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
      MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
    If I am selecting single row, I can properly get the selected index via debug.
    BUG:
    When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
    Please see the screenshot.
    [url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
    Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
    Helpful inputs will be appreciated.
    Thanks.
    Jaime
    Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PM

    Hi,
    Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
    Flowlogic.
    LOOP WITH CONTROL TC_01.
         Module Get_Marked.
    ENDLOOP.
    Module Pool
    Module Get_Marked.
    read the data from the internal table where mark  = 'X'.
    this should give you only selected records.
    Endmodule.
    Kindly check the tablecontrol property.
    Regards,
    Ranjith Nambiar

  • Unable to delete a row in table control

    Hi,
    I'm unable to delete a row in table control.
    I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
    Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
    Please help.
    Regards,
    Manasee
    Message was edited by: Manasee Chandorkar

    hi,
    kindly chk this.
    PROCESS BEFORE OUTPUT.
    MODULE status_9010.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
    ENDLOOP.
    PROCESS AFTER INPUT.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
    ENDLOOP.
    *& Module move_data_to_table OUTPUT
    This is to move the data from the internal table to the table control
    MODULE move_data_to_table OUTPUT.
    This is to move the data from the internal table to the table control
    zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
    READ TABLE int_factor INDEX tab_control-current_line.
    IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
    ENDIF.
    ENDMODULE. " move_data_to_table OUTPUT
    *& Module move_data_from_table INPUT
    Date is moved from the table control to the Internal Table
    MODULE move_data_from_table INPUT.
    To move the data from the table control to internal table 'INT_FACTOR'.
    int_factor-modecode = zmpets_mode-modecode.
    int_factor-rangeid = zmpets_range-rangeid.
    int_factor-factor = zmpets_servfacto-factor.
    int_factor-chk = line.
    *here if the data is there, it will modify
    MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
    APPEND int_factor.
    CLEAR int_factor.
    ENDIF.
    ENDMODULE. " move_data_from_table INPUT
    *delete a line from table control
    MODULE user_command_9010 INPUT.
      CASE sy-ucomm.
    When an entry is deleted, and the entry is removed from the table
    control.
        WHEN 'DELETE'.
          PERFORM f_del_frm_tab_cntrl.
      ENDCASE.
    ENDMODULE.
    FORM f_del_frm_tab_cntrl .
      LOOP AT int_factor WHERE chk = 'X'.
        DELETE int_factor WHERE chk = 'X' .
        CONTINUE.
      ENDLOOP.
      CLEAR int_factor.
    ENDFORM.
    for any clarifiaction pls mail me.
    pls reward points, if this helped u.
    regards,
    anversha.
    [email protected]
    Message was edited by: Anversha s

  • How to select perticular row in table control for BDC

    Hi all
    I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is  material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
    Please Suggest me. it urgent.
    Thanks& Regards,
    RP

    Hi all
    I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is  material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
    Please Suggest me. it urgent.
    Thanks& Regards,
    RP

  • . How to put Check box in every row in Table

    Hi Friends,
    I have one doubt in Webdynpro with java. How to put Check box in every row in Table?
    For Exam My requirement is I am getting BAPI from ECC System. So I have to go given input details in first view and output details in SecondView. So in Second View I will taken Table that data will displayed in rows. I need each and every row first I need check box.
    Here Select Check Box of particular row then click GetData button.  That row data will be displayed in one popup window.
    In table suppose 6 rows available in table. Every Row first Check box available.
                             empid, name, sal  ,firstname, last Name
                             empid, name, sal  ,firstname, last Name
                             empid, name, sal  ,firstname, last Name 
    How to put Check box in every row in Table?  can you send any examples applications
    Regards
    Vijay

    Hi Friend,
    When we are getting BAPI From ECC System. that BAPI Have nodes and Attribues...in under node we can't create "CheckBox"
    attribute.
    So i am doing like this.I am create on Checbox attribue out side of Node. Check Box data type is boolean.
    next i am creating table ( that table having rows and columns) Right click on table-->Click on Insert GroupedColumn->again right click on nsert GroupedColumn---> Here Select Check Box.
    Okay...here i am getting one problem. i have got Check boxes .But i am select check box in  first row. that time all check boxes will be selected.
    i need select first row check box that only first row will be selected suppose i selected second row check box that only second will be selected.
    i need this can u help me....
    Regards
    Vijay

  • How to get color in the final row of table view( table control)

    Hi,
    iam having a table control displayed with 10 records as output,in that i need to provide a color for the final row since it is total inorder to show difference from other records.
    Kindly advise me on this.
    Thanks & Regards,
    Nehru.

    Hi Nehru,
    Checkout [THIS|Re: set color for a particular row in table view] thread .
    [This |http://www.sapdesignguild.org/resources/htmlb_guidance/table.html#at] Might also help you.
    Regards,
    Anubhav
    Edited by: Anubhav Jain on Jan 4, 2009 7:34 AM

  • How to get all rows in table to red using alternate rows properties option

    How to get all rows in table to red using alternate rows properties option

    Hi Khrisna,
    You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
    I tried doing it and the colors freaked me out (all red) :-D
    Kindly tell me if im missing something.
    Regards,
    John Vincent

  • How to Hide Row in table view depend on condition

    Dear Friends,
    Please any one suggest how to do hide some rows in table depend on condtions.
    My Issue is :
    I have table with binding componant context controller, with in that some rows are no need to disply in my table, I tried to delete that entities from collection wrapper in do_prepare_output. but that entites are perminatly deleted from model node.
    how can achive this with out delete entities from model node and hide some rows in table view.
    thanks & Regards

    Hi Andrew,
    Please can you explain alobrate, because i wont' found that method in my implimentation and it's table config like follow
    <% IF attr->check_consistency( ) eq abap_true. %>
        <chtmlb:configTable  xml="<%= lv_xml %>"
                             id="TextList"
                             navigationMode="BYPAGE"
                             onRowSelection="select"
                             table="//Text/Table"
                             width="100%"
                             selectedRowIndex="<%=Text->SELECTED_INDEX%>"
                             selectedRowIndexTable="<%=Text->SELECTION_TAB%>"
                             selectionMode="<%=Text->SELECTION_MODE%>"
                             usage="ASSIGNMENTBLOCK"
                             visibleRowCount="3"/>
      <% ENDIF. %>
    thanks & Regards
    Ganesh

  • Regarding page down in the table control veritcally

    Hi all,
              I have an issue regarding page down in the Table control in module pool , i.e when i m click the vertical scroll bar and going for page down then , the control is flowing to the next sceen which is not needed , and it shuld just scroll down and up vetically.
    Can anyone help me how to handle the page down event ?
    Thanks & regards,
    satya

    Table Controls: Examples with Scrolling
    The following example processes a table control with LOOP without parallel loop using an internal table. In addition to the scroll bar, the user can also carry out program-controlled scrolling with function codes.
    REPORT demo_dynpro_tabcont_loop.
    CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
    DATA: ok_code TYPE sy-ucomm,
          save_ok TYPE sy-ucomm.
    DATA: itab TYPE TABLE OF demo_conn,
          fill TYPE i.
          TABLES demo_conn.
    DATA: lines TYPE i,
          limit TYPE i.
    SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
    CALL SCREEN 100.
    MODULE status_0100 OUTPUT.
      SET PF-STATUS 'SCREEN_100'.
      DESCRIBE TABLE itab LINES fill.
      flights-lines = fill.
    ENDMODULE.
    MODULE fill_table_control OUTPUT.
      READ TABLE itab INTO demo_conn INDEX flights-current_line.
    ENDMODULE.
    MODULE cancel INPUT.
      LEAVE PROGRAM.
    ENDMODULE.
    MODULE read_table_control INPUT.
      lines = sy-loopc.
      MODIFY itab FROM demo_conn INDEX flights-current_line.
    ENDMODULE.
    MODULE user_command_0100 INPUT.
      save_ok = ok_code.
      CLEAR ok_code.
      CASE save_ok.
        WHEN 'NEXT_LINE'.
          flights-top_line = flights-top_line + 1.
          limit = fill - lines + 1.
          IF flights-top_line > limit.
            flights-top_line = limit.
          ENDIF.
        WHEN 'PREV_LINE'.
          flights-top_line = flights-top_line - 1.
          IF flights-top_line < 0.
            flights-top_line = 0.
          ENDIF.
        WHEN 'NEXT_PAGE'.
          flights-top_line = flights-top_line + lines.
          limit = fill - lines + 1.
          IF flights-top_line > limit.
            flights-top_line = limit.
          ENDIF.
        WHEN 'PREV_PAGE'.
          flights-top_line = flights-top_line - lines.
          IF flights-top_line < 0.
            flights-top_line = 0.
          ENDIF.
        WHEN 'LAST_PAGE'.
          flights-top_line =  fill - lines + 1.
        WHEN 'FIRST_PAGE'.
          flights-top_line = 0.
      ENDCASE.
    ENDMODULE.
    The layout of screen 100 is:
    A resizable table control called FLIGHTS is defined. The fields of the table control are transferred from the structure DEMO_CONN in the ABAP Dictionary. The first two columns are lead columns. The corresponding fields are output fields. A title bar, column headers, and a selection column are created. The component MARK of type character with length 1 from structure DEMO_CONN is assigned to the selection column. You can select one column and several lines.
    It has the following flow logic:
    PROCESS BEFORE OUTPUT.
      MODULE status_0100.
      LOOP WITH CONTROL flights.
        MODULE fill_table_control.
    ENDLOOP.
    PROCESS AFTER INPUT.
      MODULE cancel AT EXIT-COMMAND.
      LOOP WITH CONTROL flights.
        MODULE read_table_control.
    ENDLOOP.
      MODULE user_command_0100.
    The system executes a loop at PBO and PAI using the table control FLIGHTS. During the PBO loop, a module is called to fill the table control from table ITAB of the ABAP program. During the PAI loop, a module is called to modify table ITAB.
    Before the PBO loop, in the module STATUS_0100 the current number of lines of the internal table ITAB is placed in component LINES of control structure FLIGHTS. This helps the system to correctly install the scroll bar of the table control.
    During the PBO loop, in the module FILL_TABLE_CONTROL the work area DEMO_CONN is filled with values from the internal table, where the row index corresponds to the current row of the table control.
    During the PAI loop, in the module READ_TABLE_CONTROL the current number of the loop SY-LOOPC in the table control is placed an auxiliary variable. The number is dependent on the size of the screen. The rows of the internal table, whose row index corresponds to the current row of the table control, are overwritten with the contents of the work area DEMO_CONN. User input is transferred from the input fields of the control to the internal table. In particular, the internal table also contains a flag in the column MARK to indicate whether the row of the table control is selected or not.
    After the PAI loop, user input is processed in the module USER_COMMAND. The GUI status SCREEN_100 provides the appropriate function codes. You can scroll line by line or page by page, or Goto the first or last page. You can implement scrolling by setting the component TOP_LINE of control structure FLIGHTS. For page-by-page scrolling the auxiliary variable that is filled in the PAI loop by SY-LOOPC is used as the step size.

  • Applying table scroll bar for only table rows with table columns fixed.

    hi oa gurus,
    i had implemented table scroll bars using oarawtextbean , there is no problem in vertical and horizontal scroll bar working its working fine. but the requirement is i need to scroll only the table rows with table columns fixed. so , how to achieve the table scroll for only table datas neglecting table headers.
    the code for vertical and horizontal bars scroll is like this,
    OARawTextBean ors = (OARawTextBean)webBean.findChildRecursive("raw1");
    ors.setText(div id=tabledivid style=height:500px;width:100%; overflow:auto>);
    OARawTextBean ore = (OARawTextBean)webBean.findChildRecursive("raw2");
    ore.setText("</div>");
    where raw1 and raw2 are rawtextbean created above and below of the table . but i dont know hoow to apply this only for table rows neglecting table columns , can anybody give any ideas.
    pelase this is very urgent , can u help me in this regards
    thanks
    Edited by: user630121 on Sep 29, 2008 5:17 AM
    Edited by: user630121 on Sep 29, 2008 5:18 AM

    hi,
    I have a similar task to do... Only to apply scrollbar at the table level.
    I tried using the above mentioned but I am facing Null Pointer Exception..
    Please explain about raw1 and raw2
    Rahul

  • How to add empty rows in table in smart form

    how to add empty rows in table in smart form?
    plz help me regarding this
    send me ur queries to [email protected]

    You will need to add some extra rows to the internal table that your table is displaying.  Use a program node to append additional rows with a key but no argument.
    Alternaively a template may me more suitable for your requirement than a table.
    Finally, please do not include you e-mail address in your question.  Your question and the answers provided to it are for the benefit of everyone in the Community.
    Regards,
    Nick

  • Add and Delete a row in table

    Hi Expert,
    In SAP interactive form OFFLINE Scneario.
    I have a deep structure. In which i am using other structures like kna1, knb1, knvv.
    Now in KNVV is again a deep structure in which i have a table type.
    Now a draged and droped this table type to my layout  so i got a table.
    I Need to have two buttons ADD and Delete, To add and delete a row in table repectvily.
    I saw other threads also but get not do it.
    My table type attribute's name in KNVV structure is VLACT.
    I write following code on click action of ADD button
    data.#subform[0].Button1::click: - (FormCalc, client) -
    VLACT.row.instanceManager.addInstance(1);
    xfa.form.recalculate(1);
    but it shows error msg
    accessor "VLACT.row.instanceManager.addInstance(1);"
    is unknown.
    Also i am not able to see tabel itself wich i draged and droped. Only two buttons are there.
    Plz help
    Thanks ? Regards,
    Arvind

    Hi Otto,
    This is the code i am using to add new row.
    Also all the settings in form are correct like "Repeat row for each data item" etc.
    I want to have at most 7 rows.
    var nTableLength = Table1.nodes.length; 
      var nNumRow = 0;
        for (var nCount = 0; nCount < nTableLength; nCount ++)
          if ((Table1.nodes.item(nCount).className == "subform") & (Table1.nodes.item(nCount).name !== "HeaderRow"))
           { nNumRow = nNumRow + 1; }
               if (nNumRow == 7)
               { xfa.host.messageBox("The maximum allowable number of rows is 7. You cannot add any more rows.", "Warning", 3); }
           else {
                  Table1.Row1.instanceManager.addInstance(1);
                  xfa.form.recalculate(1);
                   xfa.host.messageBox("row added" );
    I get the msg form the statment        xfa.host.messageBox("row added" );
    But i can not see the newly added row
    Plz help
    Thansks & Regards,
    Arvind

  • Adding/delete/copy a row in table in web dynpro

    Hi Expers,
    We  have  arequirement where on screen of view there is a "ADD" button,"DELETE" button and a ":COPY" button. once the user click on "ADD" button , a new row must add in the existing table,once the user select a  row from table and click on "DELETE" button , that row must delete .once the user click "COPY" button a new row must added with the data of the selected row.
    Can you plz help me how to do this.
    Thanks
    Mahesh

    Hi Mahesh,
    -> To add a new row to the table, you need to create and bind  a new element to the node.
    DATA: lo_nd_test TYPE REF TO if_wd_context_node,
            lo_el_test TYPE REF TO if_wd_context_element,
    ls_test TYPE wd_this->element_test.
      lo_nd_test= wd_context->get_child_node( name = wd_this->wdctx_test ).
      lo_el_test= lo_nd_test->create_element( ).
      lo_nd_test->bind_element( new_item = lo_el_test set_initial_elements = abap_false ).
      lo_nd_test->set_lead_selection( lo_el_test ).   " to select the new row added
    -> To delete the exisiting row, get the selected row element and call remove_element method.
    lo_el_test= lo_nd_test->get_lead_selection( ).
    lo_nd_test->remove_element( lo_el_test ).
    -> To copy the existing row, get the values of the selected row using get_static_attributes( ) method and set the values to the new row added.
      lo_nd_test= wd_context->get_child_node( name = wd_this->wdctx_test ).
      lo_el_test= lo_nd_test->get_lead_selection( ).
      check lo_el_test is not initial.
      lo_el_test->get_Static_attributes( importing static_attributes = ls_test ).
      clear  lo_el_test.
      lo_el_test= lo_nd_test->create_element( ).
      lo_nd_test->bind_element( new_item = lo_el_test set_initial_elements = abap_false ).
      lo_el_test->set_Static_attributes(EXPORTING static_attributes = ls_test ).
    Regards,
    Manogna

  • Enable/Disable Rows In table Control

    I m getting material number for particular material doc.  if i get N rows in output i want to disable all other rows of table control.
    Moderator message: please search for previous solutions to similar problems before asking.
    Edited by: Thomas Zloch on Nov 20, 2010 7:24 PM

    Hi,
    In PBO, Loop at your table control lines, create a module inside it and use
    LOOP AT SCREEN.
    SCREEN-INPUT = '0'.
    MODIFY SCREEN.
    ENDLOOP.
    Regards,
    Senthil

Maybe you are looking for

  • Regarding the wireless problem of my T60. Hope there is someone who can help me out. Thx.

    I have read some of the posts and i found out that some of the Thinkpad users have the problem of unable to connect wireless network using Access Connection but not Window wireless network connection. For my case, i have connect the network with both

  • Dual booting Windows 8 and Arch Linux with UEFI

    Hi all! I'm trying to install Arch Linux on my computer where I already have Windows 8, and I'm getting a little stuck when it comes to the partitioning. Following the beginner's guide and the method here: https://wiki.archlinux.org/index.php/Un - n_

  • Help with chapter title text and removing "{" symbol

    I am trying to creat a Quicktime Pro movie with chapter titles.  I followed the instructions in the Quicktime user manual to use a text editor and I am able to creating the chapter markers as desired, however, my chapter titles all have the "}" symbo

  • Strange Screen Glitches Starting Up

    Sometimes when I power on my MacBook Pro, the screen is blank or has strange vertical lines in it. I think the LCD screen is bad. If you lightly press on the bottom corner of the screen, the problem usually goes away. If you lightly press on the bott

  • Importing Qucktime (Mov) problem in Adobe Premiere Pro CS6

    Hello, I'm haveing a problem importing Quick time files into Adobe Premiere CS6. Whenever I try and import a quicktime mov Premiere becomes unresponsive and crashes does anyone know what the problem might be and how to rectify this issue? I'm useing