Regarding populating dynamic values in text elements

I want to populate some dynamic value in my field catalog text elements how can we achive it?

Hi
Check this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8747e990-0201-0010-a69f-c52888feaadf
Regards
Pavan

Similar Messages

Issue in populating dynamic values in smartform

Hi Experts,
I am facing some serious alignment issue while populating dynamic values in smartform.
Through table, I am populating dynamic values in smart form. If my internal table contains 20 records , first 10 records are populating in first page and remaining records are populating in next page properly. But here issue is whenever that first 10 records are populated in first page system automatically leaves empty row at the end of page. Ideally it should not happen. please tell me how to solve this issue.
thanks
Karthik

Hi,
I was wondering how are the bold lines output, if you only have one line type... is the Table node executed multiple times under the loop node, where the bold text is implemented as separate text node..? It should IMO actually not affect the output of the table in any negative way if it's done so - just curious
With the "protect" I meant this baby:
You could also try to download and attach only the (upper) node involved in the output of table instead of whole form, if there is something in the form that should not be seen publicly...
cheers
Janis

Bex. Query in 3.5 : All Variable values using Text Elements not shown

I am using a Variable, for which I am suppose to select more than 15 values . After executing the report, I am trying look for these values using Layout--> Display Text Elements --> All.
Only first 10-11 values are shown and the rest are shown as ...
As such, I cannot see all the values in WAD too, in the info tab.
Is there any limitations to display the values with text elements ?
Any idea how to display all the values ?
Thanks

You are right. I can do this if I select Filter values.
But, I am trying to show the values entered for the variables using Layout-->Display Text elements --. Alll or variables.
These are the values shown in the web template. The filter values goes to the data analysis tab, which are fine.
I want to display all the values in the information tab, but only few values are show and rest are shown as ... The same is the case when I select Layout-->Display Text elements --> All or variables. after I execute the query.

Dynamic Values for text

I apologize in advance. Not much of a web designer or code guy here, but I just need to create a simple animation to be dropped into a MUSE creation and I think Edge Animate is the right way to do it. For the life of me I cannot figure out how.
Basically, I want to create a simple animation to explain the dimensions of a product. A line with arrows on both ends would grow to the length of a line drawing symbolizing its height for example.
Accompanying that would be a text box that I would like to simply count up from 0.0" to 3.5" for instance.
The question is how do I dynamically update the text from 0.0 to 3.5 across a 2 second animation in Edge Animate?
Is this even available or is this why people are still using Flash.
Thanks in advance and apologies for the naivety!
Karl

Hi Karl,
No naive at all : a very interesting exercise.
We use three elements
• a rectangular shape ;
• a diamond cursor that moves along the shape (2 s tweening) ;
• a text value element.
1) The first solution leverages the update event that is fired by the timeline.
First define constants that you can modify to your needs.
Stage > creationComplete event handler :
endValue = 35;
duration = 2000; // 2000 ms
Timeline.update event handler (accessed via the top left bullet+curly braces icon : circled on the screen capture) :
var newValue = Math.floor( sym.getPosition()/duration *endValue);
sym.$('value').text(newValue);
sym.getPosition() gives the current position of the playhead in ms. We divide it by the total duration of the animation and multiply by the end value to display. Math.floor rounds to an integer value.
2) The second solution leverages the JavaScript setInterval function, which calls a function at regular interval. For that, we define a new variable frequency : you can tweak its value until you get the correct frequency for the update.
Stage > creationComplete event handler
endValue = 35;
duration = 2000; // 2000 ms
frequency = 100;
setInterval(function()
var newValue = Math.floor( sym.getPosition()/duration *endValue);
sym.$('value').text(newValue);
}, frequency);
Download the two versions here : https://app.box.com/s/gi7hownshaz6rti8kggu
Gil

Populating dynamic values in the combobox with XML form Builder.

I am trying to populate dynamic value in the combobox with xml form builder. I see the document saying create property group and document property Id with respecitive values. I am able to create the property group with system admin -> System config
-> KM -> CM -> Global services -> property Metadata -> groups with new button. and I am trying to create document property Id with value. I am not able to find the way to give value in the property. I am using EP 7.0 Sp 14. Please let me know how to sovel it

Hi
You can create new property metadata with System Admin > System Config > KM > CM > Global services > Property Metadata > Properties > New. Specify the values for this metadata as the ones you need to have in the combo box. Use allowed values parameter of the matadata to sepcify the values. Each metadata property will have unique property ID and you can map this property ID to your combo box in xml forms.
Give it a try.
Regards,
Yoga

Display value in text element in screen painter

Hi,
I have created new sreen. I have I/O field and text field. My i/o field is zcust of data element kunnr. After I run transaction and when I chose value in this field (for example customer 123456) I want to be displayed customer name in text field. Customer name is value kna1-name1.
How can i do this?
Thanks.

Hi Nihad,
In the PAI of the screen use the field statement.
field zcust module cust_name.
in the program write the below code to populate the customer name.
MODULE cust_name INPUT.
select single name1 from kna1 into CUST_TEXT
where kunnr eq zcust.
ENDMODULE.
Regards,
Charumathi

Regarding Xcelsius dynamic value alerts

Hi Experts,
Can anyone help me how to give alerts for dynamic condition in xcelsius.
Example: We need to highlet a parameter(crse) value only if it is less than regional crse which comes dynamically.
Dear Experts can you Kindly respond asap........
Regards,
Swetha

Hi Swetha,
In your Alerts panel, enable Alerts and then select As Percent of Target. Choose your Regional CRSE cell as your target.
Under Alert Thresholds, set Minimum to 100% as your alert color.
Let us know if this works!

Text Elements in WAD

In WAD report output, I need to display only 2 variables data(values) selected by the users!
I know we need to use INFORMATION web item, but how can I restrict it to display only 2 variables data
out of 16?

I drag n drop a info web item. Assign a Dataprovider
Select 'Variable value' as Text Element
Select the VAriable by typing the variable tech name manually under 'variable' property.
After doing above steps, still Im not able to see any variable data displayed.

Transporting Translations of Text Elements in SE38

Hi All,
A report has been transported to the integration system in which the text elements are maintained in English Language.
Now, I have to provide the translations to all the text elements in Italy Language. When I maintained the translations (GOTO --> Translations in ABAP editor) for all the text elements, the program has not prompted to save them in a Transport request. Instead all the translations are saved in Development system.
Could you please help me in assigning these translations to a transport request and release them to Integration system?
Best Regards,
Kumar.

Hi,
Go to text elements from the go to menu tab, give a space and try to save it again it will prompt to give the package name and transport request. Assing the package and TR.
Thanks,'
Sriram Ponna.

Initialising constants using text-element

hiii, I want to initialize the constant data object used in my ABAP program with the value of text element, Can anybody plz tell me how to do so?

Actually in my program I was using some constants data object to hold the description of the field name which will be displayed in ALV list in header. for example,, like this
*Constants for Field Descriptions:
Constants:
 c_text1 TYPE descr_40 VALUE 'Material',
 c_text2 TYPE descr_40 VALUE 'Description',
 c_text3 TYPE descr_40 VALUE 'Phys Inv Doc',
 c_text4 TYPE descr_40 VALUE 'Plant'.
Now i want to make these descriptions language independent hence i tend to use text element like this:-
 c_text1 TYPE descr_40 VALUE text-001
but this thing is not working giving some error.

Dynamic text element (Text Symbols)

Hi,
How can we make text element dynamic?
Ex:
If I want a text "Consider date g_date" where g_date is populated from program. Can I pass g_text like text-001 g_text?
Thanks.

If you need it for a message, just use a predefined generic one, i.e
MESSAGE s000(0k) WITH 'Consider date' gdate '' ''.
Then you don't even have to define 'Consider date' as a text-symbol. But you can. Then it is
MESSAGE s000(0k) WITH text-001 gdate '' ''.
Regards,
Clemens

Logic behind dynamic Text Elements in BEX

We are trying to find out how BEx gets the "Last Cube Refresh Date." This can be added as a Text Element in BEx reports. What we are trying to do is determine which date is pulled when a BEx query is running agains a MultiProvider. We have one MultiProvider that consists of 3 Cubes and a DSO. When we run a query against the MP, and compare the "Last Cube Refresh Date" with the values stored in the 0BWTC_C07 cube, sometimes this date stamp matches one of them and sometimes it does not. I realize the times are offset for GMT and that is taken into consideration and we also realize that 0BWTC_C07 is not updated in real time. So our question is still, where does the BEx query get the "Last Cube Refresh Date" when it's run?
Any input is appreciated. Thanks!

Hi,
In the Multiprovider you may have multiple Infoproviders..
so in the report one KF and char will be getting populated from one Infoprovider and another from few other Infoproviders for eg..
so when it will run it will show the latest date for which it has displayed the data in the report for that cube.
also check following threads
The specified item was not found.
To display the Last Data refreshed Date in Webi Report in XI R3
If you want to display that "Status of Data " field in the report... Then you need to set it at...
Run the query -> from the BEx toolbar choose LAYOUT -> Display text elements -> General.
Status of data is the time on which the latest load occured to the cube. Lets say, you have built a report on a cube which is loaded on 01/10/2007. When you run the report, the status of data will show this date 01/10/2007 until you load the cube again. In this case, if you load on 01/20/2007, the status would now show up as 01/20/2007.
Note: If your report is built off a multiprovider with multiple base cubes...then the status of the load would be the latest date off of these cubes with this change...
Lets say the latest request loaded to
CUBE1 01/10/2007
CUBE2 01/15/2007
CUBE3 01/20/2007.
Then the status of the data in a report built off these cubes will be 01/10/2007
If you want to display that field in the report...
Run the query -> from the BEx toolbar choose LAYOUT -> Display text elements -> General.
Thanks and regards
Kiran

Problem in populating dynamic data in standard text

Hi Guru's,
I am finding difficulties in populating dynamic data of a standard text. I have created a standard text PM30_T010 (Type ST) as below.
Objects Used:
Equipment : &NOTIFICATION.EQUIPMENT&
Floc           : &NOTIFICATION.LOCATION&
I have added the container NOTIFICATION at the task level and call the standard text.
INCLUDE PM30_T010 OBJECT TEXT ID ST LANGUAGE EN
But the equipment number and location values are not getting populated. At the same time, if I place the same text (mentioned above) in the description section of Workflow task instead of calling the standard text, equipment number and location values gets populated as expected.
Please let me know how to achive the same through standard text.
Regards,
Parthiban

Hello !
     Check the binding and data types of the containers involved in binding.
    Also check in workflow log, whether the workflow containers are populated with required values.
Regards,
S.Suresh.

How to pass dynamic values in standard text......

Hello,
I have no idea that how to create the standard text with transaction SO10,and how to pass the dynamic values to that standard text.Will you guide me with step-by-step procedure.
Thanking you in advance,
Regards,
Asmitha.

Hi,
    Goto SO10 Tcode
Give :- Text Name:- any Name
           Text Id :- ST
            Language:- required language
Now the Text which you want to print along with the Dynamic variable,
Ex:- Sales order number is &VBAK-VBELN&
Save and Activate
above is i have given it VBAK-VBELN, you can give field name which hold dynamic value.
Now call the above created Standard text in your Form and check it.
Regards
Bala Krishna

Creating text elements dynamically by program

Hi all,
Do you know how I can create text symbols or selection texts dynamically by program? (calling a FM or editing a table?)
What's the table for text elements?
Thanks in advance,
Mathieu

Hi,
Not sure of FM. But programically u can do.
Check the statement
INSERT TEXTPOOL PROGRAM FROM TAB LANGUAGE
SY-LANGU.
This creates the text elements in the specifies program and in specified language.
Not only text elements but also list headings u can create.
Check below sample code given by SAP.
DATA: PROGRAM(8) VALUE 'PROGRAM',
      TAB LIKE TEXTPOOL OCCURS 50 WITH HEADER LINE.
TAB-ID = 'T'. TAB-KEY = SPACE. TAB-ENTRY = 'Sales'.
APPEND TAB.
TAB-ID = 'I'. TAB-KEY = '200'. TAB-ENTRY = 'Tax'.
APPEND TAB.
TAB-ID = 'H'. TAB-KEY = '001'. TAB-ENTRY = 'Name   Age'.
APPEND TAB.
TAB-ID = 'S'. TAB-KEY = 'CUST'. TAB-ENTRY = 'Customer'.
APPEND TAB.
TAB-ID = 'R'. TAB-KEY = SPACE. TAB-ENTRY = 'Test program'.
APPEND TAB.
SORT TAB BY ID KEY.
INSERT TEXTPOOL PROGRAM FROM TAB LANGUAGE SY-LANGU.
eg:TAB-ID = 'I'.                 For Text elements
TAB-KEY = '200'.             Text element number
TAB-ENTRY = 'Tax'.        Actual text
But use it only for new developments. Bucause it may overwrite the existing texts.
Thanks,
Vinod.
Edited by: Vinod Reddy Vemuru on Aug 8, 2008 2:48 PM

Regarding populating dynamic values in text elements

Similar Messages

Maybe you are looking for