Regarding set-up of reports

Hi all - I have created a few reports using Query designer. I have created a few text variables for the initial selections for these reports.
What are the next steps to be followed for the business users to be able to select the data they want from these reports ?
Should I create roles and authorizations for these queries and transport and ask the usergroups to access the reports via Bex ?
I searched in sap help for a task-wise or a step-wise procedures followed after creating the queries in Query designer but I could not find any. If anyone can give a general task-flow involved after the creation of the queries on Query designer, it'll be of great help to me.
Thanks.

Hi,
Once you create the queries and test them to make sure they are working, transport them to Prod and put them in roles or folders.
Now you need users to access these queries , so add the queries to the existing roles or create new roles for the users to access the queries.
Cheers,
Kedar

Similar Messages

Error in RSS file when setting datasource in report

Hi,
I trying to prepare script to deploy my reports to reporting service 2008. Script is takes from
this question (Deploying Reports rss). Unfortunately code provided for data sources settings is not working in my case and I do not know why.
Sequence is following: removed reports path, re-craete it, create datasource and for each report following actions performed: deploy and set datasource.
After first report tried to set data source in itself scripts failed with error:
D:\_ST\FLASH>rs -i deploy.rss -s http://localhost/ReportServer_i2008
Parent folder Pipeline Reports created successfully.
Deploying report 'CRM Practice Report'
Report: CRM Practice Report published successfully.
Setting datasource to report 'CRM Practice Report'.
Error setting datasource to report 'CRM Practice Report'
ERROR while Publishing report: CRM Practice Report
Unhandled exception:
The data source 'Warehouse Datasource' cannot be found.
Here is the script I using to deploy datasource and reports:
Dim definition As [Byte]() = Nothing
Dim warnings As Warning() = Nothing
Dim destinationFolder As String = "Pipeline Reports"
Dim reportsTargetPath As String = "/" + destinationFolder
Dim reportsSourcePath As String = "D:\Depot\Internal\BDW\BDW_Phase4\Src\BDW_R4.17.2\Reports\BDW_Reports"
Dim datasourceName As String = "Warehouse Datasource"
Public Sub Main()
Try
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
If rs.GetItemType(reportsTargetPath) = ItemTypeEnum.Folder Then
rs.DeleteItem(reportsTargetPath)
End If
rs.CreateFolder(destinationFolder, "/", Nothing)
Console.WriteLine("Parent folder {0} created successfully.", destinationFolder)
CreateReportDataSource(datasourceName, "SQL", "Data Source=apopov\i2008;Initial Catalog=bdw")
PublishReport("CRM Practice Report")
PublishReport("CRM Report")
PublishReport("Pipeline Practice Report")
PublishReport("Pipeline Report")
Console.WriteLine("Tasks completed successfully.")
Catch ex As Exception
Throw ex
End Try
End Sub
Public Sub CreateReportDataSource(name As String, extension As String, connectionString As String)
Dim definition As New DataSourceDefinition()
definition.CredentialRetrieval = CredentialRetrievalEnum.Integrated
definition.ConnectString = connectionString
definition.Enabled = True
definition.Extension = extension
Try
rs.CreateDataSource(name, reportsTargetPath, False, definition, Nothing)
Catch e As Exception
Console.WriteLine("ERROR creating data source: " + name)
Throw e
End Try
End Sub
Public Sub PublishReport(ByVal reportName As String)
Try
Console.WriteLine("Deploying report '{0}'", reportName)
Dim stream As FileStream = File.OpenRead(reportsSourcePath + "\" + reportName + ".rdl")
definition = New [Byte](stream.Length-1) {}
stream.Read(definition, 0, CInt(stream.Length))
stream.Close()
rs.CreateReport(reportName, reportsTargetPath, False, definition, Nothing)
Console.WriteLine("Report: {0} published successfully.", reportName)
SetDatasource(reportName)
Catch e As Exception
Console.WriteLine("ERROR while Publishing report: " + reportName)
Throw e
End Try
End Sub
Public Sub SetDatasource(ByVal reportName As String)
Try
'Not working, I do not know why
Console.WriteLine("Setting datasource to report '{0}'.", reportName)
Dim reference As New DataSourceReference()
reference.Reference = reportsTargetPath + "/" + datasourceName
Dim source As New DataSource()
source.Item = reference
source.Name = datasourceName
Dim sources As DataSource() = New DataSource(0) {}
sources(0) = source
rs.SetItemDataSources(reportsTargetPath + "/" + reportName, sources)
Catch e As Exception
Console.WriteLine("Error setting datasource to report '{0}'", reportName)
Throw e
End Try
End Sub
I have not ideans why this error may occures.

Hi Alex,
I have test the script in my test environment, it works.
Based on the error message, the data source 'Warehouse Datasource' cannot be found. Please check, did you have add Warehouse Datasource.rds file in the same folder? In your case, it is located in: D:\Depot\Internal\BDW\BDW_Phase4\Src\BDW_R4.17.2\Reports\BDW_Reports
If the issue is persist, please feel free to ask.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

OBIEE Answers does not display the result set of a report query

Hi,
We have a pivot table type of report in Oracle Business Intelligence Enterprise Edition v.10.1.3.3.2 Answers that has the following characteristics:
     3 Pages
     3 Sections , 4 Columns
     18363 Rows in the result set
As per the NQQuery.log, the query for this report executes successfully resulting in 18363 rows. However, nothing comes up in the display on Answers. Moreover, no error is reported. The instanceconfig.xml file has the following setting:
<PivotView>
     <CubeMaxRecords>30000</CubeMaxRecords>
     <CubeMaxPopulatedCells>300000</CubeMaxPopulatedCells>
</PivotView>
Even with these settings, Answers just returns a blank page - nothing is displayed in the name of the result set of the report query. Has anyone encountered this problem scenario before?
Any help is much appreciated.
Thanks,
Piyush

Hi Fiston / Pradeep,
Thanks for your inputs. A few points to note:
-> I am actually not getting any error message in answers or the NQQuery log. Moreover I am not getting any errors related to "query governor limit exceeding in cube generation" also.
-> I have other pivot table type of reports in the same repository that work fine. In fact the report which has this issue even works sometimes - what actually is happening is that if I alter the number of sections from 3 to 4, then the result set changes from 14755 Rows to 18363 Rows and as per the NQQuery.log in both cases the query completes successfully. However, when the result set has 14755 rows, I get to see the output in Answers; however when the result set is 18636 rows, the Answers screen just goes blank and does not show any output or error. This makes me believe that there is some parameter in instanceconfig or the NQSconfig file - I have tried a lot of changes but nothing works !
Any help is much appreciated.
Best Regards,
Piyush

Default setting for Budget Report S_ALR_87013558

Dear All,
In Budget Report S_ALR_87013558, when it is executed every time when we enter, 2 number formats are displayed, one in Lakhs (Factor 1,00,000) and one in units (Factor 1). When I change it to Factor 1 through "Number format", then it comes as per selection.
This is only in prod server, dev server is ok.
How can I make it default to normal for all users on client level, i.e. to Factor 1.
Thanks
Shubham

Execute the report, now change the number format as per your requirement, now after changing, Press Ctrl+S, this will save the setting to this report. so if you execute the report system will take the number format which you saved as default setting.

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
null

On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help.

Set up delivery report on 6700 slide

My misses has just got a 6700 slide but I can't find how to set up delivery reports or view the memory card.
Im sure it very obvious but any help will be very appreciated
Thanks

You're welcome, and I assume your network DOES support it !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Regarding setting additional clauses to the Standadr VO

Hi,
I have a standard VO. I want to append certain conditions to the query of the VO.
The additional clause begins with 'minus'.
I have read something in this forum itself about getting the existing query from the VO and then appending the clauses to the query and adding the query back to the VO.
Please give me your valuable inputs regarding this issue.
Thanks,
Priya

Follow the thread Regarding setting a where clause dynamically for a standard VO
--Shiv

Regarding SET TITLEBAR in normal ABAP report

Hi All,
I wnat to know the use of SET TITLEBAR command in ABAP report . i have searched the forum but i am not find any sutable answers.
for what purpose we use the SET TITLEBAR in normal ABAP report.
Regards
CB

SET TITLEBAR - Liste
Syntax
SET TITLEBAR title [OF PROGRAM prog]
[WITH text1 ... text9].
Extras:
1. ... OF PROGRAM prog
2. ... WITH text1 ... text9
Effect
During list processing, this statement sets the GUI title, specified in title, for the display window of the current list level and all following list levels up to the next statement SET TITLEBAR. The statement has - for the most part - the same syntax and semantics as for screens.
In contrast to the screens of dynpros, each list level automatically remains linked to the title set for it. When you return from the display of a higher list level to the display of a lower list level, the latter is displayed with the title that was set for it.
Check the HELP file of SAP before posting your queries.

Regarding upgrade of web report\web templates functionalites BW 3.5-BI 7.0

hi all,
         I m working on a Upgrade study from BW 3.5 to BI 7.0 for Web Templates,web items and java scripts.
Below is the scenario of the client system:
New web templates are created from the 6 master web templates available for publishing to a custom Portal (created using BSP and hosted on the WAS). TOOLBAR and FOOTER are custom web templates used in all Master Templates and contain various JavaScript functions and footer code respectively.
TOOLBAR provides the Toolbar, header and buttons functionalities in the Master Templates via the contained Javascript functions. FOOTER displays the date and time of issue as well the logged in user.
FOOTER1 and FOOTER2 are web items derived from FOOTER web template. They have different set of web item properties and are used to create web templates used through the custom Portal.
It is observed from BW Tables that out of 100 unique Web Templates available in the system, 90 are using TOOLBAR template and 95 are using FOOTER template.
No external Javascript .js files are used in the Web templates. Most of the Javascript functionality is contained in TOOLBAR and no other custom javascript in master templates. However, there are some derived web templates where custom javascript is contained.
Following is the process to create custom Web Templates in development server that are eventually transported to QA and Production:
1)     The appropriate master template is identified and saved with new name in developer role.
2)     Dataprovider is added to corresponding web items.
3)     From the library, properties are transferred from master template to the custom template.
4)     Report title is added in HTML tab.
5)     No changes are needed in the Web Templates Properties except change of value in Show Jump Target in field to the portal Frame ConPortal or _self in case RRI is to be used.
6)     Some properties like Title, Width in Pixel, Affected Data Provider, etc. needs to be adjusted. Changes can be done to web items seen in Overview tab except the FOOTER and TOOLBAR web items. These web items are saved as reusable components in Library.
7)     After all the changes the web template created is transported from development server.
To summarize, all master data for creation of web templates like reusable master templates, web items in library, web templates containing Javascript code are stored in dev. server. Custom web templates created from these are transported.
I want to validate the sequence of migration as below:
Following sequence has to be followed for the Web Templates and Queries Migration in development BI 7.0 Server:
1)     Migrate the Individual BEx Queries first and perform functional testing.
2)     Migrate the TOOLBAR template manually (create as new in BI 7.0 Toolset) and FOOTER template automatically (using Migration Tool).
3)     Manually migrate the JavaScript code in TOOLBAR. Please refer to section ..for more details.
4)     Migrate the library of reusable web items, if any.
      (What to do if web item is custom or is not supported in BI 7.0)
5)     Migrate the Master Web Templates manually (create as new in BI 7.0 Toolset) and automatically (wherever possible) and perform functional testing.
6)     Migrate the custom web templates automatically (wherever possible) and manually, if automatic migration is not possible. Perform functional testing and data provider binding.
7)     Perform jump target binding wherever applicable.
8)     Transport custom templates, TOOLBAR and FOOTER to QA and Production subsequently.
Also i have the following questions:
1. How to migrate functionalities accessed thru web templates like jump queries, general navigation blocks with filter, table interface, and are data providers automatically linked to web items or have to be done manually post migration.
2. Do we need to migrate the library of reusable web items also.
3. After migrating the master web templates and javascript containing templates to BI 7.0, can we migrate automatically the custom webtemplates derived from master templates and containing the custom javascript that is now avaialbe in BI 7.0, will they pick up the custom code automatically.
thanks in advance
Regards
praveen

No resolution found

Setting IT performance report in Solman

Hi,
We are trying to set up IT performance reporting in Solution Manager. BI client is same as production client. The Info objects are not getting activated. The job fails with the message to use a different BI client.
SOLMAN SM37 Job log:
Message text
Message class
Message no.
Message type
Job started
00
516
S
Step 001 started (program CCMSBI_SETUP_BATCH, variant , user ID KZHX33)
00
550
S
Incorrect client 025
00
001
S
use BI client 001.
00
001
S
Prerequisites check failed
00
001
A
Job cancelled
00
518
A
If any one faced this issue and resolved, kindly throw some light on it.
Thank you.
Regards,
Manju

Hi Manju,
The issue is due to inactive object in the infocube .
Please check the note: 1110013 - ST: Manual activation of BI Content for E2E Diagnostics SP13 attachment . it will help to activate the inactive object.
or
Go to basis configuration -> step 5. configure automatically ->re-excute the Activate BW Source System. so it will reactive the infocube.
Also check the below discussion,
CCMS_BI_SETUP IT Performance Reporting Activation
Error :
20140620 050208[ERROR ]: Activation of InfoCube 0CCMDAY1 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMDAY1 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMDAY2 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMDAY2 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMMIN1 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMIN1 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMMIN2 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMIN2 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMMNTH1 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMNTH1 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMMNTH2 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMMNTH2 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMQTR1 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMQTR1 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMQTR2 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMQTR2 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMVRKF failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMVRKF manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMWEEK1 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMWEEK1 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0CCMWEEK2 failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0CCMWEEK2 manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoCube 0SMD_PE2H failed
20140620 050208[HELP ]: Attempt to activate object CUBE:0SMD_PE2H manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoSet 0CCMIAGGR failed
20140620 050208[HELP ]: Attempt to activate object ISET:0CCMIAGGR manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoSet 0CCMIAVDT failed
20140620 050208[HELP ]: Attempt to activate object ISET:0CCMIAVDT manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of InfoSet 0CCMICURR failed
20140620 050208[HELP ]: Attempt to activate object ISET:0CCMICURR manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of MultiCube 0CCMPDATA failed
20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMPDATA manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of MultiCube 0CCMSDSR failed
20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMSDSR manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of MultiCube 0CCMSMTPH failed
20140620 050208[HELP ]: Attempt to activate object MPRO:0CCMSMTPH manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of MultiCube 0SMD_MPEH failed
20140620 050208[HELP ]: Attempt to activate object MPRO:0SMD_MPEH manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMAGGR failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMAGGR manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMAVDT failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMAVDT manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMBUFF failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMBUFF manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMCURR failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMCURR manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMSDCFG failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMSDCFG manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMSYINF failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMSYINF manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCMTHRS failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCMTHRS manually in transaction RSOR. If this is successful, execute setup again.
20140620 050208[ERROR ]: Activation of DSO 0CCM_SCFG failed
20140620 050208[HELP ]: Attempt to activate object ODSO:0CCM_SCFG manually in transaction RSOR. If this is successful, execute setup again."
Rg,
Karthik

Regarding Aging / Net dues report another way

Hi,
I have seen aging report for customer in SAP B1, its okay but not serve my purpose. i want this report little difference.
when i run this report system will ask to put the date and all customer will show.
example for one customer below:
i put the date 15-01-2011 then Net Dues will show like below:
Customer name--   Date      -Ivoice Num Invoice AmtDue days--
Balance
ABC--01/01/2011INV001 1000--
14
ABC      -
03/01/2011-- INV002 4000--
12
ABC -
07/01/2011-- INV003 5000--
8
ABC-- 15/01/2011 INV004 80001--
18000
Now, Incoming payment made on 16-01-2011 amt     4500
now i want to see net dues on 16-01-2011, it should come like below;
Customer name--   Date      -Ivoice Num Invoice AmtDue days--
Balance
ABC      -
03/01/2011-- INV002 500--
13
ABC -
07/01/2011-- INV003 5000--
9
ABC-- 15/01/2011 INV004 80002--
13500
look what has happened, INV001 has paid fully and INV002 has partial paid. ( 4500-1000-3500=500 for inv002)
if it is possible to make query report please help me about this.
Regards,
Mizan
Edited by: mizan700 on Apr 25, 2011 4:50 PM

Hi Zal,
Thanks for your hard work.
please see the link below and which i have marked red color. actually i want to know   Bangladesh Lamps Ltd total balance due is 2071528.90. against which Invoice.
http://www.sendspace.com/file/cy9j92
Below is my SQL query
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
-- =============================================
-- Author:          <Mizan>
-- Create date:      <26 Apr 2011>
-- =============================================
ALTER PROCEDURE [dbo].[@BGWL_NetDues]
     (@Age DATETIME)
AS
BEGIN
--DECLARE @Cardcode varchar(12)
--DECLARE @Cardname     varchar(50)
--DECLARE @CardFName     varchar(100)
--DECLARE @Itemcode     Varchar (8)
--DECLARE @Dscription     varchar(100)
--DECLARE @Quantity     FLOAT
     SET NOCOUNT ON;
     IF EXISTS (SELECT * FROM SYS.OBJECTS WHERE NAME ='Temp_NetDues')
Drop table Temp_Netdues
CREATE TABLE Temp_Netdues (Cardname varchar(100),
DocNum int, InvDate datetime, Days int, InvAmt Float, Balance FLOAT )
INSERT INTO Temp_Netdues
Select A.Customer [Name of Customer], A.DocNum [Invoice#], A.InvDt [Date],
datediff(dd, A.InvDt, @Age) [Days],
A.InvAmt [Invoice Amount],A.[balance] from
SELECT T0.[CardCode], max(T0.[CardName]) [Customer], T0.[DocNum],
max(T0.[DocDate]) [InvDt], T0.[DocDueDate], T0.[DocTotal], T0.[PaidToDate],
Doctotal - paidtodate [InvAmt], 0 as balance
FROM OINV T0 where datediff(dd, T0.[DocDate], @Age)>0
group by cardcode, docnum, docduedate, doctotal, paidtodate
having ((doctotal -paidtodate) > 0)
union all
SELECT T0.[CardCode], max(T0.[CardName]) [Customer], 0 as [DocNum],
'' as [InvDt], '' as DocDueDate, 0 as [DocTotal],0 as [PaidToDate],
0 as [InvAmt],T1.balance [Balance]
FROM OINV T0 , OCRD T1 where datediff(dd, T0.[DocDate], @Age)>0 and
T1.[CardCode]=T0.[CardCode]
group by T0.cardcode,T0.[CardName],T1.balance
having ((sum(doctotal) ) > 0)
) A
order by [Name of Customer],[Invoice Amount] desc
update Temp_Netdues set InvDate='', days=0 where docnum=''
--delete from Temp_NetDues where docnum=''
SELECT * FROM Temp_Netdues   order by Cardname,Balance asc
END
Regards,
Mizan
Edited by: mizan700 on Apr 26, 2011 2:44 PM

Error - Object variable or with block variable not set while running report

Hi,
I am trying to run BEx reports through portal.
However I am not able to run any report. I am getting following error.
"Run time error '91':
Object variable or with block variable not set"
This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
Also I have authorization to those reports. So doesn't seem to be authorization issue.
Please help me to resolve this problem.
Thank you in advance.
Regards,
Deepti Jain.

Hi Deepti,
Can i knw how you solved this issue?
Regards,
Maili

Is PaperSize set in the Report Design Machine Dependent and not Universal?

Hello
I have been having a problem with setting a Custom Paper size in CR2010 for Visual Studio 2010 VB Net and in the solution that I found, the author says that
The fact is that crystal report save the information of the format of a report in a non-portable way!
It saves the "ID" of the format instead of his "Name"!
The problem is that in Windows this ID is machine dependent.
I created a Paper size for C6 envelopes, and used that Paper size name when I created a report. But whatever settings I used for setting PaperSize at runtime, the Report printed on the Default Paper size for the printer which in my case is A4.
Using this code
Dim doctoprint As New System.Drawing.Printing.PrintDocument()
            doctoprint.PrinterSettings.PrinterName = "YourPrinterName" '(ex. "Epson SQ-1170 ESC/P 2")
            For i = 0 To doctoprint.PrinterSettings.PaperSizes.Count - 1
                Dim rawKind As Integer
                If doctoprint.PrinterSettings.PaperSizes(i).PaperName = "MyCustomFormatName" Then
                    rawKind = CInt(doctoprint.PrinterSettings.PaperSizes(i).GetType().GetField("kind", Reflection.BindingFlags.Instance Or Reflection.BindingFlags.NonPublic).GetValue(doctoprint.PrinterSettings.PaperSizes(i)))
                    oRpt.PrintOptions.PaperSize = rawKind
                    Exit For
                End If
            Next
from Stefano on http://social.msdn.microsoft.com/Forums/en/vscrystalreports/thread/e16a1630-ad0c-4fda-8351-16e0807072eb I have been able to print on the custom Paper Size Option that I had created
My question is, if I am making a report which is going to be used by other users on different computers, do I need to use the code to find the correct paper size ID on the Users computer for all paper sizes, both standard sizes and custom sizes?
For example will myReportDocument.PrintOptions.PaperSize = PaperSize.PaperA4 in the code not work on another users computer if their printer has a Default paper size of Letter? Will I need to use the above code example to find the paper size ID for the user's machine?
Thank you

Hello Ludek
Thank you for the reply
Not the same query - the two links to the two questions you listed were how to overcome the problem of making the report print using a custom size
In finding a solution to that, the suggestion was made that the PaperSize stored by the Report is a machne dependent ID - if that is the case then is it correct that when the report is used on a different computer by another user, that the Paper ID size stored by the Report will not work for the second computer and that I need to include code to find the second users Paper ID that matches the paper size that the report requires even for standard paper sizes?
I understand that custom papersizes may require code to find the Machine Paper ID, but am now not sure if the problem arises for all paper sizes when the report is used on third party computers
Regards
David

How to use selection-set in submit report

Hi ,
How to use,
submit report via selection-screen
                                     using selection-set 'ABC' .
Can somebody pl tell me how to use selection-set 'ABC' in submit report . It would be nice if someone can send me a piece of code.
Regards,
Hardik

Hi,
This is from ABAPDOCU.
SUBMIT REPORT01
       VIA SELECTION-SCREEN
       USING SELECTION-SET 'VARIANT1'
       USING SELECTION-SETS OF PROGRAM 'REPORT00'
       AND RETURN.
Effect
Executes the program REPORT01 with the variant VARIANT1 of the program REPORT00.
You can use f1 help also.

Regarding set-up of reports

Similar Messages

Maybe you are looking for