Regarding split delivery in sd order

Hi,
Please find below my requirement.
When the delivery document is made with reference to sales order a delivery split is required if the delivery dates at the line items of the sales order is different.If the dates are different we have to copy the line item with ealier delivery date.
i have to use routine 101 underf the deliveries requirements of the transaction vofm and do the modifications in the same.i do not know how to use the transfer parameter BP_SUBRC while doing the modification.

you don't have to change the routine 101 but the one you use in the copy control from order to delivery.
to find them: SPRO. logistiv execution->shipping->copy control
reward if helpful
regards
Roberto

Similar Messages

  • Delivery Split in Stock transfer Order

    Hello gurus,
                        In Stock transfer order process, Delivery has been split. In purchase order we have two materials, while creating delivery in VL10B System is splitting the deliveries and creating two delivery no. instead of one delivery. I checked everything but i could not reach out the solution. can you tell me what could be reason for this delivery split in Stock Transfer Order Process.
    Regards
    Soumendu

    SAP have provided a report ZLE_ANALYZE_DELIVERY_SPLIT in note 355404.
    This report tells you exactly what is causing the split by highlighting the cause in red. It does not make any change to the database on your system (i.e. no changes are made on your system). I would recommend you implement this report.
    Often, I have seen the delivery time being the cause of a delivery split. So check the values of LIKP-LFUHR for each delivery. But the above report would tell you exactly.

  • Delivery Split from multiple sales order with signle ship to party

    Dear All,
    I have multiple sales oreder with different Sold to party and single Ship to Party.
    I want to combine all sales order into a single delivery but here deliver split due to different sold to party which I have checked through report ZLE_ANALYZE_DELIVERY_SPLIT.
    Can any body suggest me, whether i can write any copy control routine so that it will stop in splitting delivery.
    Please suggest if any other way of possibility.
    Regards
    Prashant

    All partners which stand in the partner schema of the delivery and which are copied from the preceding document are part of split criteria. The only mandatory partner of the outbound delivery however is the ship-to party.
    You can delete the sold-to party from the partner schema for deliveries with order reference and it is then no included in splitting criteria.
    Furthermore you can control split criteria in copy control routines -> field ZUKRL is used for this purpose. You can check standard routine FV50C001 for that.
    Your Z* code means that you have applied custom logic to define split criteria. But most probably it is called by copy control routines and the mechanism should be the same.
    For more details you can also check OSS notes:
    SAP Note 546668 - FAQ: Delivery split when creating deliveries
    SAP Note 166397 - Delivery split according to customer field ZUKRL
    Regards,
    Dominik Modrzejewski

  • Split delivery

    hello sir if i have 2 ship to party and order quantity is15 then if i want 10 items go to one ship to party and rest go to another ship to party. inshort i wan to do split delivery  due to multiple ship to party .kindly help me to solve this.

    Dear Chavvii,
    I think it is possible in standard.
    For Ex. If you want to deliver Material A - 100pc to Ship to party X and Y 50 - 50.
    Then in your sales order enter Material A - 50pc and again enter 2nd line of same material A - 50 pc.
    Go to details of your first line item then go to item partners and maintain shipto party as X and similarly maintain Ship to party Y for 2nd Line item.
    Now when you create delivery, system will split delivery for each Ship to party which will be processed further seperately
    I think this is what you want.
    regards
    Mayank

  • Link between Delivery and Sales Order Schedule Line

    Hi Gurus,
    I have a requirement in which i need to display quantity and amount at schedule line level and also the delivery and delivery item for each schedule line.
    For example, if there is a sales order O1 and item 10 for which we have 3 schedule lines and 3 deliveries as well say D1, D2 and D3.
    Report should be something like this
    Sales Order    Item   Schedule Line    Delivery    Del Item   Confirmed Order Qty
    O1                 10      1                       D1           10            5
    O1                 10       2                      D2            10            5
    O1                 10       3                      D3            10            4
    How can i determine that a particular delivery corresponds to which schedule line of that saler order-item?
    We have the link between delivery and sales order but is there any way that we can get the link of delivery at schedule line level?
    Please help.
    Regards,
    Gaurav

    Hi,
    I suppose you must check with SD functional consultant and the post should also be in the logistics SD forum and not BI. But I suppose there is know specific link between the schedule line of SO to the Delivery. It is more like a bucket flow for ex.
    Sale order   Item    Schedule line  qty
    SO1            Item1     Sch1            10
    SO2            Item1      Sch2           10
    Delivery Item QTy
    DO1       IT1   15
    DO2       IT1    5
    In this case qty 15 is distributed over both SO1 and SO2, and SO2 ITem1 Sch2 has link to both the DOs
    So I am not sure if you can establish a one to one link, please check with your SD consultants.
    Regards,
    Ashwin G

  • Delivery from Sale Order for Inquiry stock

    Dear All,
    We have unique requirement from client mentioned below, any help would be greatly appreciated.
    This is a trading sale which is initiated from inquiry.
    1. Inquiry is created in SD, which in turn triggers Purchase Requisition.
    2. PR is converted to RFQ.
    3. Based on RFQ prices are negotiated with vendors, then Quotation is sent to Customer from VA21 which is created against inquiry.
    4. Now when the PO is created w.r.t RFQ, then GR is done , Stock will be lying against inquiry.
    5. But i want to do delivery from sales order for stock lying against inquiry.
    we are looking for a workaround solution.
    Note:
    1. Client has disagreed with Stock Movement from Inquiry to quotation using MB1B, as it becomes manual transaction.
    2. PR triggering has to be @ Inquiry, as sale order will not be created until quotation is approved.
    Looking forward for valuable inputs.
    Thanks in advance
    Best Regards,
    Chaithru

    Tien,
    Approval will not work when you have mutiple rows of data.  You would have to work with SP Transaction Notification
    There has been threads before on the forum on the same topics.
    Block the Quantity in Sales Delivery
    Approval Procedure for chaning quantity in Delivery Document
    Suda

  • Forbid partial delivery of item, but allow partial delivery of sales order

    HI,
    have someone faced situation when it is required to allow partial delivery for sales order with restriction that item in sales order should be delivered fully. For example:
    SO has following items:
    Item1     MAT1     10 un
    Item2     MAT2     10 un
    Item3     MAT3     10 un
    Material MAT3 only 5 un available in storage. MAT1 and MAT2 are available.
    The system should create delivery for Items 1 and 2, but not for 3. Next time when creating delivery from SO and MAT3 is available, delivery is created por item3.
    I have found Partial delivery indicator on client data. This allows partial delivery.  Then I have found partial delivery indicator on sales order item data (Shipping).
    Is it possible to combine those two indicators to ensure client request?
    Can this requirement be covered in another way?
    Thanx in advance!
    Brucke

    You can achieve the requirment using customer-material information record.
    In t.code VD51, maintain customer-material information record. Here you can find a field called partial delivery/item field. Here you maintain value C- Only complete delivery allowed. Leave the max.Par.deliveries field blank.
    This will make sure that the partial deliveries are NOT allowed for a particular customer/material combination. If you maintain this setting at customer master level (t.code VD02), then this will apply for all materials.
    Regards,

  • Budget error while creating delivery from sales order

    hi Gurus,
    System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
    I am picking material from unrestricted plant stock (not in project stock).
    I am also confused as sales order has 3 line items & error shows Item 004 !

    Hi Kuldeep,
    Check this note,
    Note 159387 - Message BP603: incorrect line item is displayed
    Its valid only till 4.6. Might give you some idea but.
    Regards,
    Gokul

  • Error while doing outbound delivery against Purchase Order

    hello
    i m getting error while doing Outbound delivery for purchase order as follows
    EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
    Message no. M7146, i m not getting wht will be the reason,
    Regards
    NISHJ

    Please go through the note - 305582. It is clearly given the direction.
    Symptom
    You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
    During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
    Cause and prerequisites
    In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
    However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
    Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
    Solution
    Implement the program change in accordance with the correction instructions.
    Afterwards implement Note 413908 immediately if this is relevant for your release.

  • BAPI or FM to create outbound delivery from Sales order

    Hello All,
    My requirement is to create a outbound delivery from sales order. Also i need the batch number and texts to be updated in the delivery.
    For this i need a single FM. The catch is that we don't have the batch number and texts in the sales order. That i have to take from some other delivery. I can get all the information .
    The problem is that i can not find a FM through which i can create the delivery from the order and update the same.
    I should not use two FM.
    Could you please tell me some FM which does both in one go?
    Thanks and Regards,
    Rahul Sinha

    Hi
    Hi,
    You can use the BAPI BAPI_DELIVERYPROCESSING_EXEC.
    Check this sample code..
    PARAMETERS: p_vbeln LIKE vbak-vbeln.
    DATA: BEGIN OF t_vbap OCCURS 0,
    vbeln LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
    kwmeng LIKE vbap-kwmeng,
    matnr LIKE vbap-matnr,
    werks LIKE vbap-werks,
    END OF t_vbap.
    DATA: t_request TYPE STANDARD TABLE OF bapideliciousrequest
    WITH HEADER LINE.
    DATA: t_created TYPE STANDARD TABLE OF bapideliciouscreateditems
    WITH HEADER LINE.
    DATA: t_return TYPE STANDARD TABLE OF bapiret2 WITH HEADER LINE.
    SELECT vbeln posnr kwmeng matnr werks
    INTO TABLE t_vbap
    FROM vbap
    WHERE vbeln = p_vbeln.
    LOOP AT t_vbap.
    t_request-document_numb = t_vbap-vbeln.
    t_request-document_item = t_vbap-posnr.
    t_request-quantity_sales_uom = t_vbap-kwmeng.
    t_request-id = 1.
    t_request-document_type = 'A'.
    t_request-delivery_date = sy-datum.
    t_request-material = t_vbap-matnr.
    t_request-plant = t_vbap-werks.
    t_request-date = sy-datum.
    t_request-goods_issue_date = sy-datum.
    t_request-goods_issue_time = sy-uzeit.
    APPEND t_request.
    ENDLOOP.
    CALL FUNCTION 'BAPI_DELIVERYPROCESSING_EXEC'
    TABLES
    request = t_request
    createditems = t_created
    return = t_return
    READ TABLE t_return WITH KEY type = 'E'.
    IF sy-subrc = 0.
    MESSAGE e208(00) WITH 'Delivery creation error'.
    ENDIF.
    COMMIT WORK.
    READ TABLE t_created INDEX 1.
    Write: / 'Delivery ', t_created-document_numb.
    Regards,
    Sreeram

  • Function Module / BAPI for Inbound Delivery from Purchase Order

    Hi,
    I need to create an inbound delivery from Purchase Order items and am looking out for some Function Module or BAPI for the same.
    The requirement is that i should be able to specify selected line items from PO for delivery.
    I tried the BDC method for VL31N , but the particular item selection is problem, since by default it shows all the items of PO and i want only selected items.
    Do reply.
    Thanks in advance.

    check these and their documentations.
    BAPI_INB_DELIVERY_CHANGE       Change inbound delivery
    BAPI_INB_DELIVERY_CONFIRM_DEC  BAPI for inbound delivery verification from a decentralized system
    BAPI_INB_DELIVERY_SAVEREPLICA  BAPI Function Module for Replication of Inbound Deliveries
    Regards
    Prabhu

  • Scheduling issue for splitted operations in process order

    Hello All,
    I am facing problem after scheduling splitted operation in process order. The scenario is as follows.
    In process order there are 5 operations. 10, 20, 30, 40 and 50. Out of the above operations 30 is splitted and two different resources are assigned to it. Control key assigned to splitted operation (30) is also scheduling relevant. Now the flow of operations will be as below.
    1. Operation 10
    2. Operation 20
    3. Operation 30 - Operations is splitted (Resource used is A), qty to be produced - 10 kg.
    a. Operation 32 - Quantity of operation 32 is changed to 5 kg. Resource used is B.
    b. Operation 34 - Quantity of operation 34 is changed to 5 kg. Resource used is C.
    4. Operation 40
    5. Operation 50
    Relationship exists between opearion 10-20, 20-30, 40-50 and between 30,32, 34 with 40. But there is no relationship exists between splitted operations 32 and 34 with any of the previous operations for eg. 10 & 20.
    Issue is after scheduling all operations relationship remains maintained between operations 32, 34, 40 & 50. As operation 30 is splitted to two different operations equally total time for scheduling gets reduced but after scheduling of all operations all previous operations before operations 30 does not get resceduled? Scheduling type maintained for order is Backward Scheduling.
    Please check this and guide me how all operations before operation 30 can be rescheduled as per changed timing of operations 32 and 34.
    Best Regards.
    Edited by: Avinash Mohite on Mar 19, 2010 12:43 PM
    Edited by: Avinash Mohite on Mar 19, 2010 3:14 PM

    Hi,
    I hope u r doing in this way:
    In the capacity header screen enter individual capacity as 2. then click on Got( on top of same screen) and go to individual capacites. Enter the names of two individual capacities, for example 1 and 2. These are the names of two work centres where u r splitting ur operation.
    Double Click on operation 0030 and go to tab 'splitting' . Tick on ' required splitting' and enter maximum no. of splits as 2.Then go to capacity requirements assignment tab. enter the individual capacity as 1 and 2 and enter the splitted quanitites.Save and reschedule .
    Check and revert.
    Regards.

  • Splitting batch in process order

    HI friends,
    How I can split bach in process order ?
    Regards,
    Chetan

    Hi.
    Please Refer Below SDN thread.
    [Batch split|Batch determination for component  in co11n;
    Pradeep
    Edited by: Pradeep Kumar on May 24, 2008 10:49 AM

  • Error in PGI delivery for sales order

    Hi Experts,
    Can any tell me why do I get an error message
    "You are not authorized for given plant and mvt tpe"
    when I try to do a PGI for a delivery of sales order.
    thanks in advance.

    Hi Ashwin
    In realtime there will limit to user to access to some Plant Data.
    For SD guys access to sales order only it will not allow to create delivery for that product..for thts y u r not allowed to access  for delivery.
    In real time they will create user profiles for each document type.
    Regards
    Srinivas.

  • Status is not updated from delivery to sales order item.

    Dear Folks,
    One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
    Thanks & Regards,
    murali.

    Dear Murali,
    Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
    I hope it will help you,
    Regards,
    Murali.

Maybe you are looking for