Regarding spool list title

Hi
Please help me in this regard
i am working in archving project of 3.1i version, here the spool list title has to be generated when i execute program either in foreground or background automatically, for this i wrote Function module "GET_PRINT_PARAMETERS"
please see below code
move sy-sysid to tit3.
move 'MF403' to tit4.
concatenate 'QAR' tit1'/'tit2 into title.
concatenate tit3 plant tit4 into title1.
concatenate title title1 into title separated by space.
move title to title1.
call function 'GET_PRINT_PARAMETERS'
exporting
 archive_mode = '2'
 archive_text = title1
 ar_object = doc_type
 copies = 1
 cover_page = 'X'
 destination = 'LP01'
 expiration = '8'
 immediately = 'X'
 layout = 'X_65_80'
 line_count = 65
 line_size = 132
 list_name = 'QAR'
 list_text = title
 new_list_id = 'X'
 no_dialog = 'X'
 release = ' '
 report = 'YPDQA01R'
 sap_cover_page = 'D'
 sap_object = 'DRAW'
importing
 out_archive_parameters = arparams
 out_parameters = params
 valid = valid
exceptions
 archive_info_not_found = 1
 invalid_print_params = 2
 invalid_archive_params = 3
 valid_missing = 4
 out_parameters_missing = 5
 others = 6.
if valid <> space.
new-page print on
parameters params
archive parameters arparams
new-section
no dialog.
endif.
If i execute this program automatically title should generate in spool "sp01" or else in background job "sm37" - spool list.
sp01
03069 01/18/06 06:53 Archive 3 QAR 003510-107/ JONATHAN EDG0040MF403 

i wrote concatenate statements for this title "QAR" etc,
once program generate title, again some times it not, error: No spool list available.
I checked document_type and archive_object every thing is fine
i debugged the program "sy-subrc = 0" in each step, please let me know what will be the problem.
appreciate for spontaneous reply.
Thankyou
regards
vani.

Hi ,
Please confirm that the code whatever you want in the output must come in b/n
if valid <> space.
new-page print on
parameters params
archive parameters arparams
new-section
no dialog.
-- output data code must come here.
endif.
Hope This Info Helps YOu.
Reward Points If It Helps YOU.
Regards,
Raghav

Similar Messages

Background job cann't open the Spool list, the error as below.

Hi, experts,
My background job 'Z1RM0063' couldn't open the spool list, the error as below:
' The selected section of the spool request 20,004
in SYSTME SID is empty.'
Who could tell me this is why ?
Thank you very much in advance,
B.R
Michael

Hi Michael,
Its very difficult to tell... seems to be a custom job, what program is running?.. Does the spool that the job is trying to read still exists?...
Can you please post more details?
Regards
Juan

Spool list not available from SM37

Hi All,
We have scheduled a job and running successfully.
But spool list not displayed from SM37, whereas spool request generated in SP01 at the same time when the job is completed.
We've checked with the developer and they dint find anything wrong from program end.
Kindly suggest what is going wrong here.
Thanks in advance......

Hi,
Apply the following SAP notes to resolve this problem:
1372936 - Spool lists no longer displayed from SM37 after SP
1174127 - Job refers to incorrect spool request
regards,
Aidan

Spool list column width

Hi,
when i am running ALV in background i see in the spool list there is one column 'sales document' in which the last digit is not appearing. If the required number is 12345678, it is appearing it as 1234567..

Hello Raj,
When you execute the report in backgroud, the output is classical report and which need the line size. If not defined in report then the default is taken as 80 chars.
Please check the line size defined in your program, if not pls define.
REPORT <report> LINE-SIZE <width> LINE-COUNT <height> NO STANDARD PAGE HEADING.
If the line size is more than 255 chars, then there is OSS note for it. (you can try note 530147)
Hope this helps you.
Regards,
Sachinkumar Mehta

Spool List from MRP RUN

hi,
After i run MRP for a Plant , in the spool list i get a list of materials for which MRP has run.
There is another coulmn with heading Selection group, under which nos 1 to 8 are listed.
against each material some nos are displayed.
I am attaching the screenshot of the spool list.
Please refer to Link: [http://picasaweb.google.com/lyrojgeorge/Public#5315125239632521186]
Can someone explain what these nos relate to.
thanks in advance
regards
lyroj

Hi,
The details are the exception messages against the Materials.
Check in MD05 & MD06.
Best Regards,
Siva

Spool List output display 255 char when the rpt is run in Background

Hi Friends,
I tried executing a program in Background.. The report output has more than 64 columns ( more than 255 char ) ..
Iam using "REUSE_ALV_GRID_DISPLAY" for displaying the list.
My Problem:
1. The spool list is truncated after 255 characters when i run in background.
2. Th output in Spool List is coming in 2 rows ... not very clear ... becoz of that the grid lines are not getting displayed.
3. I ve not used any Standard - line size for dislaying ..
4. In foreground i am able to display all the 64 columns... Y not in Background......
5. My Printer setting is ..X_255 .... only ...
Requirement:
1. What should i do to increase the spool list display to more than 255 characters
2. Or how to save the background run reports output to an excel sheet as how we 'll take the from the foreground.
Expecting your answers,
Thanks in Advance...
Cheers,
R.Kripa .........
Enjoy ABAPing ..........
new upcoming Abaper ....

Hello Kripa,
You need to perform two actions.
1. set an appropriate format for the printer you are using. As explained from the previous messages you go to: SPAD -> output devives (type the printer you are using) -> from the menu ..-> goto -> device type -> formats. In there create a new format like Z_65_650
or Z_65_xxxx where xxxx could be up to 1065. This is the length of your report.
When you give your report in background, do not forget to choose the new format you created.
2. After the spool request is created, you take its number and use it ar a parameter in the following report.
Please copy and paste it in a new program, maybe called ZRSPOSHOWSPOOLLIST.
It should work then.
roxani
Display spool list > 255 columns
This is a SAP utility report to allow display of
spool request lists with line size more than 255 characters in
releases 4.6B and 4.6C (4.6D kernel must be used)
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.
global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
global data from LSPOCTOP
DATA: BEGIN OF SPOC
, escape
, prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)
, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I
, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
, <SPOC_FRAME> TYPE C
, <SPOC_ICON> TYPE C
, <SPOC_SYMBOL_LOW> TYPE C
, <SPOC_SYMBOL_HGH> TYPE C
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.
SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.
FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.
REFRESH BUFFER.
CLEAR IS_OTF.
TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.
FORM CLOSE_JOB *
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.
FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
V = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
V2 = 'X'.
endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
ANSWER =
COLUMNS = GCOL
LINES = GLINES
PFORMAT =
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.
LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlange berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.
IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.
copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
, <HOT_PRTCTRL>
, <HOT_FRAME>
, <HOT_ICON>
, <HOT_SYMBOL>
IF START_POS < 2.
write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.
REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH <= AREA_LEN.
REST_LEN = DATA_LENGTH.
ELSE.
WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
STOP.
ENDIF.
CHECK REST_LEN > 0.
ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.
WHILE <LDATA> CA SPOC-FIRST_BYTES.
NEXT_HOT = SY-FDPOS.
IF NEXT_HOT > 0.
ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
MODAB
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
NEXT_HOT
LPOS.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
ENDIF.
IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
ELSE.
ASSIGN 'too_short' TO <HOT_PRTCTRL>.
ENDIF.
IF REST_LEN >= SPOC-FRAME_START_LENGTH.
ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
ELSE.
ASSIGN 'too_short' TO <HOT_FRAME>.
ENDIF.
IF REST_LEN >= SPOC-ICON_START_LENGTH.
ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
ELSE.
ASSIGN 'too_short' TO <HOT_ICON>.
ENDIF.
IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
ELSE.
ASSIGN 'too_short' TO <HOT_SYMBOL>.
ENDIF.
IF REST_LEN > 1.
HOT2 = <LDATA>+1(1).
IF REST_LEN > 2.
HOT3 = <LDATA>+2(1).
IF REST_LEN > 3.
HOT4 = <LDATA>+3(1).
ELSE.
HOT4 = '?'.
ENDIF.
ELSE.
HOT3 = '?'.
ENDIF.
ELSE.
HOT2 = '?'.
ENDIF.
IF <HOT_FRAME> = <SPOC_FRAME>.
COLS = 1. " in most cases.
BYTES = 2. " in most cases.
CASE HOT2.
WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ';'. " box_drawings_light_left
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '<'. " box_drawings_light_up
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '='. " box_drawings_light_right
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '>'. " box_drawings_light_down
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '?'. " drawings_checkbox_off
WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
WHEN '@'. " drawings_checkbox_on
WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
WHEN OTHERS.
BYTES = 0.
ENDCASE.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
ESCAPE_TRICK = HOT3.
SUBTRACT 32 FROM ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
ESCAPE_TRICK = HOT3.
ADD 32 TO ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_ICON> = <SPOC_ICON>.
IF SPOC-ICON_SEL >< 1.
SPOC-ICON_SEL = 1.
ICON_ID1 = '@00@'.
ICON_ID1+1(1) = HOT3.
ICON_ID1+2(1) = HOT4.
ELSE.
SPOC-ICON_SEL = 2.
ICON_ID2 = '@00@'.
ICON_ID2+1(1) = HOT3.
ICON_ID2+2(1) = HOT4.
ENDIF.
IF REST_LEN > 4.
HOT5 = <LDATA>+4(1).
IF REST_LEN > 5.
HOT6 = <LDATA>+5(1).
IF REST_LEN > 6.
HOT7 = <LDATA>+6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.
IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
COLS = 0. " in most cases.
BYTES = 6. " in most cases.
IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
IF THE_PRTCTRL = 'SABLD'.
FORMAT INTENSIFIED ON.
"no 3.0 'SAULN'.
"no 3.0 FORMAT UNDERSCORED ON.
ELSEIF THE_PRTCTRL = 'SAOFF'.
FORMAT INTENSIFIED OFF.
"no 3.0 FORMAT UNDERSCORED OFF.
ELSEIF THE_PRTCTRL(3) = 'COL'.
CASE THE_PRTCTRL+3(1).
WHEN '0'.
FORMAT COLOR OFF.
WHEN '1'.
FORMAT COLOR 1.
WHEN '2'.
FORMAT COLOR 2.
WHEN '3'.
FORMAT COLOR 3.
WHEN '4'.
FORMAT COLOR 4.
WHEN '5'.
FORMAT COLOR 5.
WHEN '6'.
FORMAT COLOR 6.
WHEN '7'.
FORMAT COLOR 7.
ENDCASE.
CASE THE_PRTCTRL+4(1).
WHEN 'N'.
FORMAT INTENSIFIED OFF INVERSE OFF.
WHEN 'H'.
FORMAT INTENSIFIED ON INVERSE OFF.
WHEN 'V'.
FORMAT INTENSIFIED ON INVERSE ON.
ENDCASE.
ENDIF. "printcontrol
ELSE. "??
ENDIF.
ENDIF.
IF BYTES = 0.
BYTES = 1.
WRITE AT LPOS(1) '#'.
COLS = 1.
ENDIF.
ADD COLS TO LPOS.
SUBTRACT BYTES FROM REST_LEN.
IF REST_LEN > 0.
ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF REST_LEN > 0.
ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
REST_LEN
LPOS.
ENDIF.
ENDFORM.
FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
VALUE(LEN)
VALUE(POS).
FIELD-SYMBOLS .
DATA: CHUNK TYPE I.
WHILE LEN > 0.
IF LEN > 255.
CHUNK = 255.
ELSE.
CHUNK = LEN.
ENDIF.
WRITE AT POS FIELD(CHUNK) NO-GAP.
ADD CHUNK TO POS.
LEN = LEN - CHUNK.
IF LEN > 0.
FIELD = FIELD+CHUNK.
ENDIF.
ENDWHILE.
ENDFORM.
FORM SPOOLDATA_WRITE_INIT.
DATA: BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
ESCAPE_TRICK-X1 = '1C'.
SPOC-PRTCTRL_START = ESCAPE_TRICK.
SPOC-PRTCTRL_START_LENGTH = 1.
SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-FRAME_START = ESCAPE_TRICK.
SPOC-FRAME_START_LENGTH = 1.
ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-ICON_START = ESCAPE_TRICK.
SPOC-ICON_START+1 = ','.
SPOC-ICON_START_LENGTH = 2.
ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
SPOC-SYMBOL_LOW_START+1 = '('.
SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
SPOC-SYMBOL_HGH_START+1 = ')'.
SPOC-SYMBOL_START_LENGTH = 2.
ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_LOW>.
ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_HGH>.
SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM.

Spool List not printing in Background

Hi,
When i try to execute the report in background in development system i can able to see the spool list, whereas when i try to execute the same report in testimg server(may be with more data) i can not see the spool list but the job is in finish status.
Please can i know the reason for the same.
Thanks & Regards,
Sudheer.

Hi!
This may be because you started the program with the option, not to create new spool request, or to delete the spool request immediately.
When you run your program in background, check the printer options also.
Regards
Tamá

Bacth job sending email : spool list recipient field

Hi,
When creating a batch job via SM36, it is possible to send the results via email (fill "spool list recipient").
Is there a table where i can find the batch jobs which have the "spool list recipient" field filled?
Thanks,
P.

Pete,
In my system, I see only 2 values for this field. 'RECIPIENT' and BLANK. Please check if it the same with you, in case of more than these values, try to build your logic on ( not equal to RECIPIENT rather than non-blank).
Even if these 2 values only, a job (with the same name) can be executed once with the spool list recipient ON and another without spool recipient. So, be careful in your checking that the record you are checking with the non-blank value of RECOBJTYPE is the SAME execution as in SM37. Use fields SDLSTRTDT, SDLSTRTTM in table TBTCO for it.
Hope you get my point.
Regards,
Diwakar

SM37 Spool list recipient - editing the email's subject

Hello.
I am using scheduled job to send automatically a list in email every day, using the option "Spool list recipient". The name of the job appears default in the email's subject. My question is this: Is it possible to modify the subject, for example puting the variable sy-datum in the subject of the email?
Regards,
Stefan.

Hi ,
Yes we can ,
I hope u r using the FM SO_NEW_DOCUMENT_ATT_SEND_API1 to generate the email . In that we have the
i_packing_list-obj_descr = ' Enter what ever u r trying to put as header'.
Regards,
Bharani

Adding Spool List recipient

Hi Team,
When setting up a user to receive emailed reports the "Spool List Recipent" is not retaining the email addres
It is saved as part of the SM36 set up. But when going back to check in SM37 the error is No Spool List recipient.
Could you please help me on this.
Regards
Raghu

Thanks for your valuable suggestions
Furtherance all the reports printed to a particular printer. But few of the customers didn’t receive those reports. Even though I didn’t set them to print, but still we are getting prints. We set them only to receive mails.
In the successful job log I found “Error sending data (2)” Message no. PO780
Laurie , did u face this issue in your tricky. Does all this issues may helpful in this note 1810625
I really appreciate your help in advance
Regards
Raghu

Email multiple spools from background job - SM36 using Spool List recipient

I create a background job using Spool List Recipient to email me the reports. The program that I scheduled to run creates 2 spools. When the spools are sent via email, only the last spool is sent.
Please advise on how I can get the 2 spools sent via email.

i would not use the Spool List recipient from Job and use the function RSPO_SPOOLJOB_TO_OFFICE in your Program instead.
tell me if it helps.
Regards,
Laurent

Error in Email via spool list recipient feature in SM37

Hello Experts.
I encounter a strange problem. I am not able to send Email to external Email addresses (Lotus Notes) while I am using Distribution list option in spool list recipient option in SM37 background job. I am getting an error in SOST called 'Message cannot be transferred to node SMTP due to connection error (final)'.
I am Able to get email with spool on my SAP inbox if I use the option 'Internal user' in spool recipient.
Also, if I send an email in a custom program via function 'SO_NEW_DOCUMENT_ATT_SEND_API1', I am successfully able to send the email to Lotus notes id using the same distribution list. So, I suppose all the basis settings in SCOT, SU01, SICF are correct.
I checked with my basis team as well but they also see all the email settings as correct.
My spool is very small one and I have all the access in the system.
Anyone having any idea for this issue, please share.
Regards,
Diwakar

I found the answer myself.
In SCOT, SMTP setting, Output format for ABAP list needs to be set as 'PDF' or 'TXT' instead of 'HTM'.
With HTM, it was going in for error for spool email.
Regards,
Diwakar

How to set multiple receivers in the spool list receipent in SM36 ?

We want that the result of a background job can be sent to multiple users. The user email address will be the external address such as, zt330300-163.com, zt330300-tom.com?
Can you help me ? th

Hi,
This can be achieved through creating distribution list and assign the distribution list in the spool list recipient.
Regards,
Prasana.

How to schedule job with spool list recipient in CPS ?

Dear Guru,
i import job with spool list recipient from r3 to cps and schedule in CPS, job is finished but there is no spool send to the recipient ?
Please advise ?
Best regards,
Supat Jupraphat.

What job definition did you use? SAP_AbapRun? SAP_AbapRunPrint? SAP_AbapRunPrintExt?
Do you have XBP 2.0 or 3.0 in the SAP system? (check SE38 > INITXBP2)
Have you loaded the CPS transport files in the SAP system?
Note that using spoollist recipients either involves SAP_AbapRunPrintExt in combination with XBP3.0
OR
It involves SAP_AbapRun or SAP_AbapRunPrint and XBP 2.0 using transportation files in the SAP System.
Please check the section of the CPS admin guide called: "Enhanced SAP Interfaces with Redwood Transports"
Regards,
David

Spool list receipient in SM36

Hi,
I run a report in background that has 220 pages list output.The same is sent to SBWP after I maintain spool list receipient parameters.But when I open the attachment in inbox I can see only 25 pages attachment displaying, of size 17K.Are there any settings that restrict the size or any way to see 220 pages full.
Thanks,

Refer to OSS Note 329537(Spool cut off at 1000 lines when sent to recipient) - The resolution is based on the version of SAP you are on. I had the same issue when I sent a large log file via email to a user and the log was truncated.
Regards,
Mike

Regarding spool list title

Similar Messages

Maybe you are looking for