Regarding standar report using tcode FAGLL03
I am creating a report using table bsis in which I am checking total items for a particular GL account in a month.
I am comparing the report output with tcode FAGLL03 for the same GL account and the same period. But it is not matching.
Can anybody tell me why??
The total of data in my report is matching with that of table bsis.
hi,
to select open items you must select bsis and bsas (dependent from field target date = STIDA)
A.
Similar Messages
-
Regarding sales report using MC+E
Hi all,
We are viewing sales report using T-Code MC+E. In the main screen there is a variant for the selection of period. The period we are giving there is pulling up calender year. We want it to pick Fiscal Year instead of Calender Year.
Is there any where in the configuration that we can make that setting on.
Can any one suggest me to resolve this issue. Let me know if I am not clear with anything.
Thanks in advance
Ravi BoppanaHi,
I was trying to enter my fiscal period in the same field you instructed me to. When i went to OM01 there are no entries there. So should I create a new entry there. Can you pls assist me.
Thanks in advance,
Ravi Boppana -
While sheduling report using tcode - RSCRM_BAPI
Hi,
we are executing query in RSCRM_BAPI through event we are getting below eerror.
Error when scheduling the Query (JOB_CLOSE).
Can you please advice how to resolve.Hi.
The solution depends on which error message you get in log.
Plz provide exact error message from log as described above.
Regards. -
Can you create report using report painter with Tcodes:FAGLL03,FCHN
Hi Experts,
1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
2.i never used report painter can anyone provide report painter pdf for ecc6.0
3.can any oneguide me how to develop report in report painter by using this tcodes.
4.If not possible can i do with report writer?
Regards,
naresh.
Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!cross posted
Edited by: nareshvarma on Jul 19, 2010 9:11 AM -
Unmanaged reports using the RAS
We have certain question regarding unmanaged reports using the RAS and Business Object .
1. How do we programmatically open unmanaged reports using the RAS server with BusinessObjects Enterprise.
2. How do we configure the report directory which will specify the full path containing the sample reports.
3. How do we publish the crystal report in to repository. As we have license for Business Object. Do we require separate license for this.Hello Sai,
the answers to lots of your questions can be found in our [RAS samples for .NET |https://boc.sdn.sap.com/dotnet/samples]on our [dev lib|https://boc.sdn.sap.com/developer/library].
Please see some of our unmanaged RAS samples for .NET. ([example|https://boc.sdn.sap.com/node/6392])
The lowest version for them to run is CR XI R2 SP2 as this brings the inproc RAS. -
Submit report using selection-table to report 'RKAEP000'(Tcode ksb1)
Hi,
I am calling report "RKAEP000'(This is the report for tcode KSB1) using submit statement in my program to import the ksb1 output in my program. For time being I am calling this report using selection-set 'variant'.
The selection screen of ksb1 is designed with modulepool program (screen 100).
The selection screen of my program is similar to ksb1 initial screen, except layout option and controlling area is on the screen itself instead of calling it through menu.
Please tell me how to post the selction criteria of my report to the calling program 'RKAEP000'.
Thanks,
sureshYou can use WITH addition of SUBMIT statement.
SUBMIT report1 USING SELECTION-SCREEN '1100'
WITH SELECTION-TABLE rspar_tab
WITH selcrit2 BETWEEN 'H' AND 'K'
WITH selcrit2 IN range_tab
AND RETURN.
Regards,
Premal -
Hi All,
Can anyone please explain me the functionality of report RPCEMDU0_CALL (Tcode-PC00_m10_OTEM). This is used to generate master data idocs. Any documentation would be really helpful.
Also is there any way to alter the idoc data before sending. Please let me know.
Thanks in advance.
Regards,
Priti ThakurStandard Doc[ for this transaction.|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/f6/2318b13cf011d2a62900104b56737d/frameset.htm]
There are few threads in SDN and ittoolbox to discuss about the problems but nothing much!
To alter the format...explore the program. You can use the "Enhancement" part to add your custom logic to add columns to interface internal table. To access the enhancement...go to the program and press the 6th button from left ..the swirl button or press Shift + F4. Then activate enhancements ...to do the necessary coding as required.
Also try the user exit:
Note 1515497 - OT: Selection of a Provider - Customization User Exits
As per this note, there is a contact info of SAP Developer...if the note and the info is helpful and you need help related to that note or that functionality contact them.
Edited by: Amosha on Jun 22, 2011 10:31 AM -
Line Item : New dispaly field for Report generated using Tcode FBL1N
Hi Geeks,
I want to display further fields in the line item report generated using Tcode FBL1N . i have refered OSS note 373268 it only discuss about fields available from index table ( BSID/BSAD/BSIK/BASK/BSIS/BSAS ) and special field from tables ( BKPF, BSEG, BSEC, BSED... ) using FAKP .My requirement is to add NAME1 from LFA1. Pls suggest a solution.
Thanks,
KarthikHi Ushma,
Its possible.No need to cpy into Z transaction. You'll have to use a BTE for it.
Go to FIBF.
Create a 'Z' product.
Put your own. Goto settings-> P/S modules-> of a customer.
Now in the event 00001650 of z product there is a function module.
It'll be 'LINE_ITEMS_GET_GKONT'.
make a z by copying this and then put it here.
Put code in that ZLINE_ITEMS_GET_GKONT.
Also create append structure in RFPOS and RFPOSX with the fields you want.
And activate.
varun -
Regarding reports using Report Painter
Hi gurus,
I am new for this reports. I have to create a report for HU's with material number,handling unit number, description and status. I am trying create this report using report painter. I have gone through forums on how to create a report. But there is no standard reporting table for this HU's. To create a report libraries are needed but these are linked to reporting tables. So can any one explain me how to create a reporting table and also report.
Let me know if I am not clear about anything.
Thanks in advance.
Ravi BoppanaHi,
You can use this link, it describes pretty fair the procedure:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/d1/44f2b5c7f411d296080000e82de14a/frameset.htm
Generally, the technique is the same as for other SQL tools.
Regards,
Eli -
How to add Additional fields in standard SAP Report RMCLOBJVN ,TCODE CL6BN
i am facing problem in Report RMclobjvn , TCODE is CL6BN
i have to add some additional fields on the result screen.
but when i search inside the report i could not retrieve any user exits but through a search utility i got 4 user exits of which 2 seem to be useful.these are
<b>Exit name
CLCLRS01 Additional Fields on the Result Screen
CLCLRS02 Fill the Additional Fields on the Result Screen</b>
i activated the these exits and have tried putting in break point in side the include.
But the problem is this that
[<b>b]that CL6BN Tcode is not triggering anyhow these userexits.</b></b>
does anyone has any solution for adding the additional fields.Hai Manish
Check the following Links
You can do it in two ways using append structure or include structure of that standard table.
once you added , you need to adjust it and activate using the menu utilities->data base utulity-> Activate and Adjust .
check this SAP help..
for append structure
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb61446011d189700000e8322d00/frameset.htm
for include structure.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21eb54446011d189700000e8322d00/content.htm
Regards
Sreeni -
Issue with Reports using costume measures - BPC 10.0 NW
Hello BPC Colleagues,
I’m having a problem with some BPC reports using costume measures and I would like to have your inputs about this issue.
When all the reports are executed using a costume measures the report execution fails after a long time of execution (7min). The report has 1200 accounts and 57 company codes.
In order to create trial balance we create these costume measure. Basically the measures are standars (with a few changes) and it works for limited reports (few account and companies) but we I try to executed for several accounts and companies I have the following error:
“The execution of report Default Report failed. Please contact your administrator.”
Error while communicating with the server
Framework message:
The underlying connection was close: An unexpected error occurred on a receive.
Summary of the BPC LOG:
|An error occurred while receiving the HTTP response to https://BPCENV.APPSET.MODEL. This could be due to the service endpoint binding not using the HTTP protocol. This could also be due to an HTTP request context being aborted by the server (possibly due to the service shutting down). See server logs for more details.#
We already increased the PSAPTEMP table and this didn’t fix the issue. At the beginning we were sure that this was an issue with table space but the error persist.
I don’t think (maybe I’m wrong) that this is not an issue related to the costume measure or to authorizations since I can retrieve data if I reduce the request to less accounts an company, so in my point of view this looks like a performance issue.
Just for you, below you will find the details about our measure that generate the problem:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
Finally is important to mention that we are using BPC 10.0 NW (SP08)
If you have any suggestion for me I will appreciate.
Thanks you a lot!Hi Vadim,
Once again, thanks for your help.
We already modified the YTD standard measure but is with that measure that I have problem. Do you think that my new formula is not efficient and for that reason I’m having this problem? Is this correct?.
Below you will find the standard and costume measure. In red I marked the difference between these 2 formulas:
YEAR TO DATE CUSTOME MESURE:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER), [MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA],CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
YEAR TO DATE STANDAR MEASURE:
'IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="INC",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%], [%TIME%].CURRENTMEMBER),-[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="EXP",SUM(PERIODSTODATE([%TIME%].[%TIMEYEARLEVEL%],[%TIME%].CURRENTMEMBER),[MEASURES].[/CPMB/SDATA]),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="AST",([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),
IIF([%ACCOUNT%].CURRENTMEMBER.PROPERTIES("2/CPMB/ACCTYPE")="LEQ",-([MEASURES].[/CPMB/SDATA], CLOSINGPERIOD([%TIME%].[%TIMEBASELEVEL%])),-[MEASURES].[/CPMB/SDATA]))))';SOLVE_ORDER=3
If you have any suggestion to correct my formula I would really appreciate it.
Regards, -
Interactive report using Infoset quiereis with SQ01,SQ02,SQ03.
Hi,
I have to create a report by using the infoset query with SQ01,SQ02 and SQ03 Tcodes. But problem my requerment is that I have to create one interactive report with these quereis.
Can any body tell me how to create this interactive report using infoset quereis OR are there any standard quereis which are having interactive nature.
Pleas send me the solution and thanks in advance.
regards,
J.Yes, but I am not able to figure exactly how to implement it? I mean I can do this same code in SE38 where I know names of the internal tables. But when in SQ02 we can't modify/read system tables (I found name of the system tables using report generated by SQ01). So how you will access them, then how you will reflect our changes in output ALV grid?
Example:
Data:
Rate Cat. Installation Date
71 60000984 20/10/2009
71 60000984 20/12/2009
71 60001101 10/09/2009
78 60000310 10/09/2009
78 60000315 10/09/2009
83 60000297 10/09/2009
so in this case I want output:
Rate Cat. Installation Date
71 60000984 20/12/2009
71 60001101 10/09/2009
78 60000310 10/09/2009
78 60000315 10/09/2009
83 60000297 10/09/2009
You will see 71 60000984 20/10/2009 is not the latest one, therefore I don't want that row. I can do the ABAP logic for this, but exactly what and how to implement in SQ02? -
Using TCOde rscrm_bapi and a query result in a error
Hi All,
When using tcode RSCRM_BAPI the query execution results in a error Query Meta data is Incomplete
Please suggest me the solution for this ASAP.
Regards,
VarmaHi Varma,
is the query working fine?? Otherwise use transaction RSRT2 and "generate a new report"! This should fix problems with query.
Regards,
Adem -
Production order reporting using COOIS
Hi all
I am using tcode COOIS for creating reports for Production orders. I have the following requirement
I want to batch schedule the report using a variant which I have done. The report should automatically run every night at 12 am and it should automatically email the report to the email ids of the Production team. The report should be in a spreadsheet format. My question is
1/ where do i put the e mail id
2/ how do i make it to spit the report in a spreadsheet format ( Manually I can go into System > List > Save > Spreadsheet and save it onto spreadsheet)
thanks a lotHi John Mastram,
Use transaction SM36 to schedule your batch job. There you can maintain the email address of the recipient.
If the scheduled job has a spool list output, the same would be sent by email to the address maintaind
Regards,
Jayakandan -
Hi All,
I have TCode of SAP Query, i need to find out SAP Query.
things i followed:
1) Executed TCode and menu bar --> System --> Status. I got Program.
2) I went to SE93 --> TCode --> Display --> bottom i got UserGroup, Query but when i try to check that Query in SQ01 it is saying Query has not created.
3) Executed program using FM RSAQ_DECODE_REPORT_NAME, got UserGroup n Query. but same issue as above.
Query is working but when i check in SQ01, it has not created is showing.
My requirement is - functional has created 4 SAP Queries. i need to merge all the SAP Queries into 1 report program.
i need how can we check those SAP Queries in SQ01 using TCode.
Regards,
Naresh.Hi Naresh,
You did not explain how the reports were created, but if they can be accessed directly via a transaction code individually, they were probably manually created by a programmer via ABAP and were not created via SQ01. Thus, you cannot find them in the SQ01 table. Only if they were created via Ad Hoc Query (PQAH) or directly in SQ01, would they be available via SQ01.
If they were created in SQ01 in a Development system and transported to your Productive system, they can be found in the Global Area as indicated above by Boris. If they were created directly in the Productive system, they can be found in the Standard Area. And again, each area has its own set of User Groups, so you may be looking in several areas. The key is to learn how and where the queries you are searching for were created.
Paul
Maybe you are looking for
-
The plan doesn't use the index but the cost of INDEX FULL SCAN looks better
Hi, Well, I'm sure I miss the boat... and if the question is pretty tricky, the answer is probably :"You're stupid Greg!". Well anyway, you'll probably be interested in trying to answer it as I've spent some times on it without any result ! I use Ora
-
I just download cs6 photoshop, I can successfully download the program but when I try and open it up I get an error that tells me "Adobe Photoshop CS6 has encountered a problem and needs to close. We are sorry for the inconvenience." I uninstalled
-
If my imported video files are 720 by 480 will my movie have to be small sized?
I'm editing DV video files that, when I look at the specs on the file, says that the dimensions are 720 x 480. Common sense tells me that I shouldn't necessarily have to end up with a DVD that only covers about 1/3rd of my final viewing screen, but p
-
my iPod says that i need the iCloud password and i already had put it in and it is saying it is wrong... so I'm trying to totally reset my iPod touch but i have to turn off the "find my ipod" and i have to sign into my iCloud so i was wondering how t
-
Oracle Objects for OLE Documentation Release 9.0.1 Part Number A90173-01 In particular I want to have all the objects, properties, and methods that I would use in Visual Basic programming.