Regarding the design

Hi gurus,
I am very new to ABAP,Here i have a project scenario where i want to create a transaction system in R/3 using ABAP,and feed DATA .. i dont know how to do this and i know it is not possible to give the code and everything to this but i want to know the overall idea to do this in step by step here is the project scenario
The project is all about designing a security information system for a company...which has to fullfill the following
1.To track the time of an employee enters and leaves the organisation.the granularity in this should be upto various departments.
2.And the employee can bring any number of visitors to the company..and we should be able to track the visitor information also..(ie the name ,address and other details)
3.the approval for the visitor is given by the immediate manager of the employee...and we should be able to find the peak time of the visitor visit ..ie the day,month on which the visitor flow is more in the company.
i want to feed all this information in r/3
Ie empid,emp name,manager id,department id,department name,time in,time out and date for the employee
and also
visitor id,visitor name ,visitor address, time in ,timeout and date for that visitor and also the employee through whom he came into the office...
I want to know how these can be done in ABAP..
Please let me know asap and i will assign the maximum points fir the usefull answer.
Regards,
RK

Hi,
For this kind of applications you need to design a module pool
program.
through se51 create the screen and maintain the logic in
PAI and PBO events.
Here Iam providing you some links which explains to create
such applications using module pool.
Check the below link:
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Simple program to create module pool.
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Regards,
Raj.

Similar Messages

Open letter to Cisco regarding the UC320 platform

Cisco,
I have never in my life been exposed to a "production" piece of equipment with so many bugs, missing features and oddities as the UC320. While I am sure many of you are working hard to reign in the problems, this platform is an utter embarrassment that should be in the preliminary alpha stages, not a channel product being sold to end users.
It is clear that Cisco has little understanding of how SMALL business works and how SMALL partners work with small business customers. A larger partner may be able to string a larger business along with promises of bug fixes and feature additions while charging them to make things right and.or padding the overall cost to account for the callbacks. True small businesses don't have the time, patience or money to deal with problematic hardware. When a partner sells a small business a piece of technology, it better work (at a reasonable cost) or the technology and the partner are out the door.
I was extremely excited when this system was announced and saw great potential for small business customers and an alternative to the Avaya Partner IP and other platforms targeted at the same demographic. I jumped in and put a UC320 in the office of one of my small customers. This whole experience has cost me the trust of a client and is going to end up costing me $3000-$4000 out of pocket (hardware, labor, travel) to make things right with the customer.
As it stands, countless hours have been spent trying to get this system to operate in a reasonably stable and productive manner. At this time the UC320 system has been reset and reconfigured in KEY mode (this time using 2.1.3(0), as the problems with steering digits, call routing and redial in "hybrid mode" made the system more than a little cumbersome to use. Now in KEY mode, caller ID only works on some stations AFTER a call is picked up. On one station, incoming calls are somehow routed to the "Phone Monitor" buttons instead of the "Shared FXO Line" buttons. The user has to press the monitor button to pick up a call, but the call does not always ring at the station so she has to watch for the lights. While the caller ID functionality is a bit better after the latest firmware update, it is still far from working properly. These basic call routing problems are not reasonable and not acceptable, period. The customer is tired of "we are working on it" and so am I.
Other problems (to mention a few):
The GUI is full of buggy behavior. One example if many: The impendence matching dialog only works the first time around and then the GUI loses track of what it is doing and must be reset.
It takes 7-10 minutes for the GUI to load to the login screen over a remote connection. The UC320 is connected to a Verizon DSL, while not blazing fast it is a decent connection. Initial GUI loading on the LAN is almost as bad.
The IE9 product that ships with every new Windows computer is not compatible with the GUI. This is not reasonable.
The AA is somewhat unpredictable with regard to picking up calls and sometimes results in a busy tone and dropped call, even if the call is the ONLY call on the system. Sometimes the prompts are garbled and sometimes the AA does not even pick up.
Steering digit redial issue - still not addressed. Redial on hybrid mode is useless, as is the phonebook.
Caller ID only works part of the time, yet on every other system I have ever used, it works 100% of the time. This is not acceptable.
Answered calls on shared FXO lines show as MISSED on other stations with those lines. The workaround: remove the missed calls display feature. This is not acceptable.
Thus UC320 is not happy unless it is the only router, DHCP and DNS client on the LAN. The grayfield implementation appears to fail no matter what LAN topology and equipment are used. This device is far from friendly to the typical SBS or existing LAN with a dedicated DNS and/or DHCP server.
The handsets have a cheap feel to them compared to the Avaya and other competitors phones.
The sound quality of the ringtones is almost laughable if not sad
The speakerphone quality and overall voice quality are not as good as the competition's.
The filtering functionality of the logging feature does not appear to work properly
Firmware updates often result in a HANG condition where either the GUI needs reset, the system needs a physical reset and/or sometimes defaulted
Firewall port forwarding rule oddities where a rule is deleted from the gui but is still active in the firewall, yet the inability to easily use another data router to work around this problem.
The inability of the device to properly use the LAN port for INTERNET based functionality (Time for example) if the WAN port is NOT connected,
countless other 'issues" raised in the support forum and other venues...
These are ALL very basic functions that one would expect to be fixed BEFORE a basic telephone system platform is released for production. It is absolutely unreasonable for a CUSTOMER to have to put up with a system this buggy and it is absolutely unreasonable for a partner to have to devote this much time and money to getting system to work at even a very basic level of functionality.
To repeat the scenario: This config is as basic as it gets running 2.1.3(0) with (3) system phones, (3) users, (2) pots trunks and that's it. There are no odd call routing scenarios, no complex AA rules or schedules (in fact the AA is defaulted, including prompts). All (3) system phones have BOTH shared FXO lines (KEY MODE). Each and every firmware version has been tried and the system has been defaulted numerous times. The system fails to meet even the most basic expectations of myself or the end user and has become a sore spot between our company and a very good client.
I am somewhat baffled, if not outright bothered by the fact that this device is riddled with so many problems and the fixes are taking so long to be implemented, if at all. I have been asked (ordered) by the customer to get this "hunk of crap" out of their office and replace it with something that works "at no additional cost". I could not agree with the customer more...
A very unhappy Cisco Partner.
William Burnett

To William (and Cisco,)
Honestly, I like Cisco.
I like their "openess" (you can find documentation and help on almost anything anywhere), the contribution they make to industry by their huge R&D effort (more than all their competition combined....or so I've been told...), the accessibility and responsiveness of some of their key people in the distribution channel, and yes, I like the ecosystem in terms of support, tons of free education and sales support for both their SMB and classic enterprise solutions.
Having said that, I thank God for people like William Burnett, who I am sure opened the eyes of many partners about the things that are horrendously wrong with some of the products in the SMB portfolio, most notably the UC320. I think it is fair to say, that William has effectively "killed" it (the UC320) in it's present incarnation. That is, unless Cisco, decides to really rise to the challenge and fix a product that at first seemed ideal for the small enterprise, but which was poorly implemented in terms of QC and in some cases design.
We certainly are not going to be touching the UC320 with a 10ft pole now Nobody wants (or can afford to) get a bad name by selling "trouble" to your Mom&Pop shops or to people whose trust you worked hard to gain and who are really depending on you to deliver. Not in this economy....not ever.
Coming from a Nortel telephony background, its really hard to accept that having to respond to trouble calls or complaints continuously from customers when Nortel products worked so reliably. In fact, Nortel Norstar is so reliable as a key system that people joke , that's why they went out of business, they couldn't generate enough turnover in new sales on account of people holding on to their Norstar's forever.
As a seller/installer/user of Cisco voice (UC540) and CME there are a couple recommendations I would like to make to Cisco:
1)Private line emulation - inability to transfer or conference calls on a private line. (using the TRUNK XX command) on the CME/UC500 platforms needs to be significantly improved in order to keep up with the competition:
for one, when you select a private line and make a call you cannot transfer that call. Every other system I have worked with allows you to do this. This for me is a glaring "defect/design flaw". I spent a lot of time trying to get this "fixed" as I couldnt believe that Cisco would just omit such a basic function when all their competition has it. (You dont even think about this when dealing with other systems.) Its just expected.
2)Private line emulation - Inability to reflect the dialed number in the Call Detail Records for calls made via a "private line". If you select a private line on the UC500 or CME and make a call, the dialed number would not show up in the CDR. I have programmed systems from Nortel (Norstar, BCM,CS1000), Avaya - (IP Office 500, Partner Plus, and S8x00 Communication Servers) as well as various systems from Mitel and
Panasonic . The CDR packages for these systems are very well implemented and documented. Cisco's systems are well documented as well, but this is an area of the implementation where Cisco falls behind the competition. I am sure this can be fixed, but for some reason, despite a number of requests, it hasnt.
In trying to understand why it is Cisco, with such a huge R&D budget, can't seem to get some things working properly that the competiton has long ago solved and moved on with, I have come to the conclusion that it must be that Cisco propably didnt tap enough of the right (human) resources when it was developing its voice portfolio, and the lack of industry experience shows up in some random places. Sad to say, not paying attention to some of these details, to real world usage scenarios, makes what would be an otherwise super product, just good enough.
Cisco is the biggest networking vendor on the planet. People have a right to have high exectations of Cisco. Their marketing also conditions users and partners to expect more when using their solutions. While we accept that no one is perfect, not even the mighty Cisco, I think most of the complaints and dissapointment expressed in this forum, on this particular thread, are justified because there is a strong feeling that if Cisco can be such a trailblazer with their enterprise portfolio, that they should have understood the importance of ensuring and enforcing good quality control in the design and manufacture of the SMB portfolio. I honestly hope someone from "Corporate" or high enough to make a differnce, looks at this thread started by William and uses it to inspire the will to fix what needs to be fixed to redeem the UC320 in whatever incarnation, in the eyes of its partners (even former ones....such as William)and customers. This is beginning to look like a textbook case of how not to do product development.

The design of this website is confusing and hard to use.

Adobe are regarded as the industry standard of design software, so it seems ironic (or embarrassing) that this website is so poorly designed. I came here simply wanting to post a question about Flash Player but found it the whole experience to be confusing, bewildering and frustrating.
I will list my ten major criticisms below:
1. ILLEGIBLE FONTS
Many of the site's styles (eg discussion titles) use horribly small fonts, to the point of being illegible and nauseating at normal viewing distance. I have to lean forwards towards the screen to read it. I have never had this issue with any other site I visit. The font used is not a screen font and is simply not suitable for being displayed at that size and looks quite ugly (eg lower case 'e' has no hole). In addition, some of the styles use almost illegible colors (eg gray on lighter gray). This kind of "minuscule" typography might be perfect for a small space (eg application control panels), but for a website displayed on a modern computer monitor (at least 1920 pixels wide) it is totally inappropriate. And my monitor is large, I dread to think how small the text would look on a small screen.
2. UNCOMFORTABLE LAYOUT
The layout spans the whole width of the screen, making it very uncomfortable to use the site. All the important elements are aligned either to the left or the right of the screen, with a vast gap in the middle, meaning that one has to constantly dart one's eyes (or neck) back and forth, which is made even worse by the small font size which requires a person to "move in" towards the screen.
3. LACK OF PAGE TITLES
To add to the sense of disorientation, many of the key pages don't have a title, so you simply do not know where you are or what you are looking at. For example if you go to the main list of all the communities (forums.adobe.com/places), there is no title; nothing to tell you what you are looking at. Likewise, if you do a search, there is no title (eg "Search results"). Having titles at the top of pages is fundamental to web design so people don't get confused about where they are.
4. THE "FORUMS" DON'T LOOK LIKE FORUMS
I was brought to the "Using Flash Player" page by an external link, and when I arrived I was just totally confused about where I was and what I was looking at. The page title "Using Flash Player" didn't tell me I was in a discussion community. The page is littered with so many different links and features it is hard to know where to look and what the purpose of the page is. The page does not have a sense of being a discussion forum. I expect a discussion forum to have the word "discussion" somewhere at the top, with a list of threads and information such as last post, replies, views, as well as a way to see how many threads there are in that forum and a way to navigate between pages and see older threads. Not to mention all the strange buttons which I will mention in my next point…
5. MYSTERIOUS BUTTONS
A good website uses terminology and controls that people recognize and understand. But all the buttons on this site are strange. At the top of each discussion forum we have "Overview", "Content", "People", "Sub-communities" and "Follow". I can honestly say I have no idea what any of those mean or do (with the exception of "Sub-communities"). Websites should use clear, unambiguous language so that people know what the controls do and are not clicking on the "unknown". If your site does have unconventional controls that people are not going to be familiar with, you should have tooltip popups which explain, to make it easy for newcomers. I have clicked on those strange buttons but on the whole I have not been able to work out what they do. The "People" button would seem to be a way of finding users/members but surely that is a rare function and it should be at the foot of the page not in a prominent location? Likewise when you do a search, you must choose whether to search for "Content", "People" or "Communities". Most people will have no idea what the first two of these options mean, I certainly don't. It's just a very weird site.
6. INCONSISTENT LAYOUT
Another confusing thing is that there seem to be as many page layouts as there are pages! Every different page I have been to has no common elements or common menus, everything changes. Even different community pages have different features and different layouts. This leaves you feeling totally disoriented. A website's basic controls and menus should not keep shifting around, it leaves the user with no sense of continuity; it cripples their understanding of how the site functions; and it prohibits them from distinguishing between a page's controls and its content, since both keep changing around.
7. BUGGY
I am less critical of bugs because I know that inevitably they happen, and likewise will inevitably be resolved. But in my brief time using the forums I came across plenty of bugs, two are on the main welcome page:
A) First of all, a pop-up box appears which says "Say Something" inviting me to click on the pencil icon. I then click on the pencil icon and another box appears with options. However, the "Say Something" box is still there and it obscures the box below it. You can't click on it, so you have to click off both boxes, then the "Say Something" box is active again, then you can click on the small "skip" button, and then finally you can click on the pencil icon again and see what was there all along. Not a serious bug, but clumsy.
B) Also on the welcome screen there is a link at the top which says "New to the community? Check out our guidelines". I didn't hesitate to click on this because by this point I felt totally lost and confused and wanted all the help I could get. I clicked on that button and it took me to a page called Community Guidelines. I clicked on the first link ("Find answers to questions") which took me to an error page ("Unauthorized. Access to this community or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here.
8. TERMS AND CONDITIONS
Finally, the terms and conditions upon signing up are unreasonably long, to the point of being prohibitive. If someone is having a problem with their software, they don't want to have to spend hours reading through terms and conditions before they can even get to ask a question. It is completely out of order to force people to read all those terms and conditions, and especially forcing people to re-read the whole thing any time there is an update. It is simply laziness on the part of the admin. They could carefully go through the terms and conditions and identify the key elements which have been changed and provide the user with a neat summary, thus saving thousands of people many hours of reading. When I take out a mortgage on a house, I have terms and conditions to read, and I expect there to be a lot. But when I simply want to sign up to a discussion forum, I do not expect a similar level of terms and conditions. People can go to, say, Yahoo or Google or YouTube and discuss these issues freely without having to read any terms and conditions at all. By putting up all these barriers you are just turning people away.
9. IDENTITY CRISIS
Finally (and in conclusion) I would say that the site doesn't seem to know why it exists: whether it is aimed at helping the general public or amusing technology lovers?
I would have expected a site like this to be aimed at the general public, since it is promoted as a help resource by Adobe, and covers a very wide range of products, meaning that a very large and wide range of people should be expected to visit it.
However, the site gives the opposite impression. It has what I would call a steep "learning curve", with complex page layouts, full of unconventional controls and features, as well as the emphasis on community. This would all seem to suggest it is more of an exclusive site aimed more at techy people who want to "hang out" here and become regular users. I feel it is excluding laypeople and casual visitors who are simply seeking quick help.
To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help".
If you want a good example of a good, clean, elegant design that is easy to use, go to www.google.com you will notice that the controls are simple and easy: the eye is immediately drawn to the central part of the screen where the main controls are and there are only two buttons. Then if you want to see more advanced features you can go to the smaller controls which are tucked away in the top right corner and do not distract anyone.

Many of your points are totally legitimate.
This one, however, is not:
…To put it another way, the design of the site seems to be geared much more towards its regular users than those the site is supposedly trying to "help"…
The design and management of the forums for more than five years have driven literally dozens of the most valuable contributors and "regulars" away from the forums—permanently.
The only conclusion a prudent, reasonable person can draw from this state of affairs is that Adobe consciously and deliberately want to kill these forums by attrition—without a the PR hit they would otherwise take if they suddenly just shut them down.

How to delete the design bar in toplevel navigation

Hello,
I tried to delete (or make invisible) the design bar of the toplevel navigation. In the theme editor I could only make it transparent and I tried also some changes in the jsp- and js-file, but nothing worked.
What I want is, that the toplevelnavigation starts there, where at the moment start the design bar. At the moment I have a white hole at this position
I hope somebody can help me with this problem.
Thank you in advance!
Kind regards,
Ulrike

Hello Achim,
thank you for your fast answer.
The only thing I can change in the theme editor for the design bar is the background color. So, I suppose, it's not a graphic.
Or is there another possibility to change the design bar?
regards,
Ulrike

Tip regarding the "systemd[1]: Failed to start Journal Service" error

Just a tip regarding the well-known
systemd[1]: Failed to start Journal Service
error (which I ran into last weekend) to maybe save one or two among you a couple of hours of your time:
The error is described here https://bbs.archlinux.org/viewtopic.php?id=151012 as well as in several other threads in other language boards / in other forums etc. It is usually (as in the linked thread) 'solved' by reinstalling the system - good old Windows magic, also useful when dealing with systemd.
The Problem with this error is that you do not get into your system. Instead, systemd will print you the mentioned "Failed to start Journal Service" error message a couple of million times. There are also no logs that you could retrieve (when booting from a livesystem) and that would give you any helpful hints, since journal is systemd's logging service, old-style system logs are not kept, and the dmesg log doesn't survive the reboot with default settings.
As pointed out in the above mentioned thread, you will see a few more instructive error messages when adding 'emergency' to the kernel line in the bootloader config.
Now there may be plenty of reasons why the systemd journal service might not work. The most common and most annoying, however, appears to be this one:
In this case you will see that the problem actually lies in
systemd[1]: Cannot open /etc/machine-id: No such file or directory
Now, 'man machine-id' reveals that "the /etc/machine-id file contains the unique machine id of the local system that is set during installation. (...) The machine ID is usually generated from a random source (...)". It is obviously perfectly justified to refuse to boot the system because an absolutely insignificant random number is missing. As far as systemd is concerned anyway.
Usually, it seems, the /etc/machine-id is set by /usr/bin/systemd-machine-id-setup during installation or system upgrade. It is not documented anywhere that this is a rather important step and that you should better check if this was or was not actually done before rebooting. Obviously (but for no apparent reasons) systemd fails to run this (or to run this successfully) sometimes.
Also to be recommended: Always retain (back up) your old kernel and initramfs and edit your bootloader config appropriately to be able to boot with your old kernel again ... just to have one or two options left to get back into the system in case of running into an unpleasant surprise from the side of systemd or other packages.
The solution is, obviously, to create this file /etc/machine-id ... You probably want to do that from a livesystem (if you want to try it from the emergency shell, you would need to remount / (i.e. root) as rw and hope that systemd will not punish you for that) by just running the program that was designed for creating this file manually: /usr/bin/systemd-machine-id-setup
http://permalink.gmane.org/gmane.comp.s … devel/7528 states that it might also work with merely creating the file 'touch /etc/machine-id'. Though I didn't try that since I had enough fun with systemd for one week and didn't want to break my system again just to see if that works.

Jristz wrote:
ackalker wrote:Sorry for necrobumping this.
Generating the machine-id in a consistent way is very important when working with KVM and containers, where the machine-id can be set for the VM or container. See `man systemd-machine-id-setup`.
Again, _don't_ just put some random UUID in there, especially not in the systemd package install script, this makes provisioning Arch Linux containers a PITA.
If you thing that the way that arch is handlynbg the machine-id is wrong or can be improved, then file a bug.
He already did.
Jristz wrote:Anyway, I thing if reinstalling systemd package or if systemd have a command to reinitialize the machine-id file.
Like so many of your posts, I had to read this a half dozen times before it made any sense. I think you're hinting at the utility that ackalker already pointed out in the post you're replying to. And, if you read the install scriptlet, you wouldn't need to think about whether or not reinstalling would be an option. You would know that it isn't.

Tabular Modeling. What is the best practice for importing data into VS to limit the records in the designer?

Should I wrap the queries in a procedure with a @StartDate and @EndDate and create a test partition to pass a small date range?
Or can i use the Table properties screen to put the command there and will it run and not be affected or affect the partitions?This would be nice if this SQL statement on this screen was independent of the partitions and I could just leave it with the the
command text = EXEC TransactionDetail '2014-01-01', '2014-05-31' Especially since if you have many tables that load based on a date range. i would not want to jump in and change that query on all of them.
Is there a a way to have a parameter in the project so all tables would get the same @startDate and @EndDate so I could change it in one place?
And I am not stuck to these questions\options, If there is a better way to mass change the queries to run a subset of data for the designer I'd like to hear it.
Thank You,
Phil

Hi Phil,
According to your description, you are looking for the best way to control the rows that are loaded into a table, right?
When importing data to a table of tabular model, we can apply filters to control the rows that are loaded into a table. After you have imported the data, you cannot delete individual rows. However, you can apply custom filters to control the way that
rows are displayed. Rows that do not meet the filtering criteria are hidden. For the detail information about it, please refer to the link below.Filter Data in a Table (SSAS Tabular)
If I have anything misunderstand, please point it out.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here
Charlie Liao
TechNet Community Support

Why would the browser preview display look different than what I am seeing in the design view? Pls help!

When working with accordion panels, when I first insert the widget it looks fine, then I begin customizing the content and then the Preview display does not look the same as the Design display. For instance, in the design display the panel aligns with the adjacent image, but in Preview, it appears offset by one or two pixels.

Hi,
Please take a look at this post with similar discussion : Re: What I see in Design mode is not the same in Preview mode. ?
Regards,
Aish

The Design Tool is not appearing in webdynpro(ECC 6.0)?

hi friends,
when i tried to create a webdynpro, the design tool bar not appearing when i choose Window .I wat to create like LABEL, TEXTFELD, BUTTON. Is i have to change any settings to appear design tool.
Regards,
shankar.

Hi Shanker,
Large no. of threads (which explains how to solve "the page cannot be displayed " problem) in webdynpro abap forum. So I would suggest that if you have any queries like these, you should post it in the webdynpro abap forum to get quick reponses.
By the way, you can refer these thread:
Re: In the view of Web Dynpro- "Page cannot be displayed screen"
Re: page cannot be displayed in browser
Webdynpro View problem. Layout tab says 'The page cannot be displayed'
dsn error, web page canot be displayed in IE
I hope it helps.
Regards
Arjun

How does one get a simple URL link onto the Designer Form?

Greetings:
Thank heavens for small favors, kudos to Adobe for Designer and its basic email functionality.
One annoying thing, I am finding it impossible to put a simple link on the Designer Form. Likewise, if I open the form in Acrobat, the link icon on the toolbar is greyed and unavailable, so I cannot select text and turn it into a link.
I have found that I can make a bookmark with the form open in Acrobat and make that a link to a URL, but I cannot specify the initial view to show the bookmarks open, so there is a very good chance this bookmark/link will never be seen.
The HTTP button help states:
"The HTTP submit button operates like a standard button object with these settings:
Control Type set to Submit
Submit Format set to URL-Encoded Data
Submit To URL set to use the http: protocol."
which doesn't sound like it's meant to function like a simple link, and trying it anyway I get an error message that the url is incorrect.
Any ideas on this?
regards,
stevenjs
"I am but an egg."
--Stranger in a Strange Land

I guess one can't paste html in these posts, here's the code, minus all the html tags, and the brackets for the meta tag, title tag and body tag.
Opening URL in new window from Acrobat.
The Code for the first HTML page.
meta http-equiv="refresh" content="2; URL=Original.pdf"
title New Page 1 title
BODY onload="window.open('startNewPDF.htm', 'newWindow')"
Code for the second HTML page which forces the new document to stay on top.
meta http-equiv="refresh" content="3; URL=New.pdf"
title New Page 1 title
body onBlur="setTimeout('self.focus()',2500)"
By the way, I figured out where to apply javascript to a button. Being new to Designer, I did not see that slender script interface at the top.
James' xfa.host.gotoURL("http://www.yoursite.com",0); does indeed work like a charm. I just selected the button, selected Javascript instead of FormCalc, Selected "click" from the event dropdown, and pasted in xfa.host.gotoURL("http://www.yoursite.com",0); (changing the URL of course).
regards,
stevenjs
"I am but an egg."
--Stranger in a Strange Land

Comprehensible question regarding the usage of a ccBPM in SAP PI 7.31

Hello experts,
I have got basic question about the useage of ccBPM in PI 7.31 double Stack. I haven't created any ccBPM before so the whole set up process is new for me. We are currently using several ccBPM already which where created by our colleagues.
I just have a question about the basic of work of a ccBPM and if the designed process can be realised at all.
The current process should be implemented, starting from the erp system with a trigger report (left side). All the offered function are provided by the called system (right side)
So can this whole process can be realised using ccBPM, so that after the trigger report is called the rest of the process is handled within the pi? The process checkStatus needs to be called within a loop and at the end the generated File should be stored on the file system.
Thanks in advance for clearing my thoughts on this problem guys!
regards
Christian

Hello Christian,
is this a 1-1 correlation? So you have just one sender system and one target system? It might be better then to implement the flow in your sender system and only call single interfaces on PI. While it is technically possible to do everything in PI there is no real added value to do so. BPM is most benefitial when you need to aggregate information from different sources and when the process contains decisions that lead to alternative process steps.
Regards,
Jörg

View questions regarding the Satellite A205-S5859

I would like to know the following:
1. Is there a problem with the speakers from it first use. The sound volume degrades. You have to set it to 100.
2. Can I upgrade the onboard video to a dedicated video ?
3. What's the maximum memory for this model ? Where is the memory chip located ?

A friend of mine has a A200 notebook. Its not A205 but very similar. The A205 is designed for the US market and the A200 for the European market.
So finally I can provide some suggestions regarding the point:
1) Any sound volume issues are not known to me Everything is working ok.
2) No, the graphic card upgrade is definitely not possible
3) I presume this info can be found in the user manual. Did you check this??
But I think there is a possibility for a upgrade to 4GB RAM. But I would not recommend upgrading the RAM to 4GB due to the 32bit OS limitation. All 32bit OSs can handle max 3.2GB RAM.
Finally the position of the memory slots; I think its at the bottom of the unit.
Cheers

Is it possible to set the child index of items in the design view?

Is it possible to set the child index of items in the design view? I have a large png that is on top of everything in design view which is really annoying

Yes it is possible to do so. Goto View>>Tools Pallete. This will open up a tools pallete which you can use to modify the colours and other viewing options of graphs and anything else on the front panel.
For your purpose u select the background of the graph and click on the "set colour squares" present in the lower bottom corner of the pallete. This will open up a whole range of colors you can select for the purpose. There in the black and white strip of colours, there is a box titled "T" on the right most corner. Select that "T" and your background color will go transparent.
Have a nice day. Happy codings.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2

Is there a possibility to disable the DESIGN MODE within BEx Analyzer 7.0?

We need to disable the DESIGN MODE in the BEx Analyzer 7.0.
Does someone know a possibility to restrict the access?
Thanks in advance,
Ulli

Yes, it is possible to restrict the design of already existing workbooks.
You may go to Workbook Settings, enable the option, 'Password Protect Workbook' and keep a password
which may be known only to the people who can change the structure of the workbook.
When this option is selected, if you goto design mode, it would prompt for a password, and if correct password is entered, only then be allowed to add/modify design items.
I hope this helps.
Regards,
Gunjan Narang

Error Logging and notifying users regarding the errors

Hi..
we are designing a workflow in which if any user comes across an error (at any branch or while executing an action) must be alerted with the error and must send a notification to the admin that the process has stalled at that particular part of the workflow due to some error.
my doubts are
1.how can we notify the admin and the initiator of the workflow regarding the error a particular user gets.i saw in adminui that there are two tabs for the admin to view the stalled actions/stalled branches.but the admin and the user needs to be notified with an alert or email that a particular action has been stalled.
i think i conveyed my problem in a correct manner.if its confusing then plz tell me coz i am already confused in this..

Thank you sir for your immediate response of the query.
In the workflow which we are designing,a service request from filled by the user will be routed to the particular approver and he inturn will approve/reject the form accordingly.once he approves,the form is routed to the service provider who will fulfill the service requested and approved.
1.Now,for instance suppose that the workflow gets stalled while the form is with the approver.my question is how to notify the user that the service he requested is delayed due to the stalling of the process in between as well as the admin alerting him with the error which stalled the workflow process.
2.you said that it is easy to setup an email address within the adminui..but i dont know how to do that as i am a beginner.
3.Also u asked me to specify the errors for which we need to send alerts and email notifications...whatever error that occurs whenever the workflow gets staleld needs to be notified both to the user and the admin (as per our requirements).it would be helpful to us if u give a solution for this.
thank you..
Raghava Kumar V.S.S.

Customize the design of the parameter window

Hi,
My manager asked me something and I want to be sure of the answer.
I want to know if I can customize the design of the parameter window in Crystal Report XI or the only way to do that it's to create a .Net application and call the report by it.
Regards,
Hugo

Hi Hugo
Following are the answers for your queries:
Can we modify the size of the parameter window
-No
Can we modify the background color of the parameter window
-No
Can I create a string parameter and have the calendar with this parameter in the window ?
-With a string datatype paramter we cannot have the calendar window.
When I create a parameter for exemple BeginDate when the window appear at the right I always have @BeginDate can I hide this label ?
-Go to Field Explorer->parameter and rename the paramter by removing the '@' sign.
Please let us know if you need any further information.
Regards
Ashwini Yadav

Regarding the design

Similar Messages

Maybe you are looking for