Regarding the placing of iviews in a Page

Hi All
I have an issue. The issue is that i have two iviews which are document iviews and they contain jpg images in them. Now i am placing these iviews in a page .But i am getting space between these iviews when i veiw the page through a portal .Can anybody please tell me how to remove this white space as it looks very odd in my portal. itried in all ways by editing the size of the images - either it gives me a scroll bar around the image or the image comes too small .
Please reply as soon as possible .
Thanks and Regards
Nishita Salver

Hi Nishita,
Please try to adjust the Page Properties & Layout
Please modify each iView Properties like
Show tray -> No
width, etc.
Regards,
Ramganesan K

Similar Messages

I am having an issue regarding a placed order via customer service department

I recently relocated to Anchorage Alaska as part of a permanent change of station per the United States Air Force. I was initially located on the East Coast in the lower 48 and at the time of activating my contract I had purchased two separate Iphone 4 devices. I also recently went in to a store in February to purchase a Nexus 7 as well.
Upon arrival in Anchorage I had multiple issues regarding the Iphone 4 devices including being unable to send and receive text messages & imessages, unable to make phone calls, dropped phone calls, unable to utilize GPS, as well as not being able to access general account information and use anything related to web browsing or data usage. It was determined that because the Iphone 4 operates on the 3g network and Verizon does not have a 3g network in Alaska, as a result I was utilizing an extended service network from another carrier. As a result of this I am only able to use my Iphone 4 devices while connected to my wi-fi network while within my home, which is totally unacceptable.
I was not made aware that I would be dealing with this when I moved to Alaska and inquired as the the use of the devices I currently owned prior to purchasing the tablet. I was assured by three separate store employees one of which being a manager that all devices would function at 100% efficiency including the Iphone 4s. In fact I was recently billed 350$ for roaming charges last month, which prompted me to speak with a representative via the online chat regarding the significant increase she said that she was unable to process any sort of credit to the account regardless of what I had been told at a local Verizon store where I purchased the tablet.
As a result of all of these mishaps since arriving here in Alaska I determined I was in need of newer devices that utilize the 4G LTE network currently provided by Verizon in Alaska. I know for a fact that the 4G LTE works great up here because my Nexus 7 tablet runs flawlessly and does not incur roaming charges when utilizing the 4G LTE network.
Yesterday I attempted to contact Verizon through the live chat feature regarding upgrading two of the devices on my account. The live chat representative immediately asked me when my upgrade date was. Upon telling her my upgrade date 9/29/2014 she told me I should contact the customer service department as I might be eligible for an early upgrade. I then proceeded to contact the customer service department using my Iphone 4.
My attempt to speak to anyone in the customer service department resulted in a merry-go-round of being put on hold 6 separate times by two different employees, both of which had me wait for more than an hour while they attempted to speak to a manager to gain approval for an early upgrade. The first rep seemed almost sure she would be able to have my devices upgraded early especially considering the issues I was having regarding service.
The second rep seemed newer and was very dodgy about my questions and was very unwilling to help at first. He even mentioned that I had been a Verizon customer for almost two years, had never missed a single payment and had outstanding account history which should have garnered some sort of importance to the level of my request. But I digress, during this time I was disconnected from the call twice from each separate representative.
Both reps assured me they would call me back, I never did get a call back from either one of those reps and I was becoming very frustrated having waited four hours trying to find some sort of solution to my current predicament.
After waiting an hour for the second representative to call back I grew impatient and contacted the customer service department, was put on hold again, and finally reached a third customer service representative who was able to provide a solution for me.
I explained everything I had been dealing with to Cory ID # V0PAC61, both regarding the phones, the issue of the level of service I was receiving, the dire need for working devices and the multiple times I had been disconnected. I explained to him as a result of these issues I was certainly considering switching to a different provider, a local provider even who could provide me the adequate service that I require for my mobile devices.
I explained to Cory that I had been with Verizon for almost two years, and I had been on a relatives account prior to owning my own Verizon account and had never received this kind of treatment when trying to work towards a simple solution. Cory proceeded to tell me he needed to put me on hold to see if there was anything that could be done regarding the upgrades of the device considering all of the trouble I had been dealing with.
After Cory reconnected with me in the phone call he was able to successfully reach a solution by allowing me to upgrade my devices. We conversed about the options available and I eventually decided to upgrade both Iphone 4 devices to Moto X devices as we determined those would be sufficient for my needs while in Alaska. I also proceeded to add two Otter Box Defender cases to the order so that the devices would have sufficient protection. Cory inquired as to whether or not I would like to purchase insurance for the phones as well and I opted for the $5.00 monthly insurance which including damage and water protection.
Cory explained to me the grand total for the devices which included an activation fee of $35.00 for each device, $49.99 for each Otter Box case, and an additional $50.00 for each device which would be refunded as a rebate upon receipt of the devices and activation, a rebate that I would be required to submit. Cory explained to me that the devices would most likely arrive Tuesday of 6/17 and no later than Wednesday 6/18.
Cory took my shipping information and told me everything was all set and the only thing left to do was to transfer me to the automated service so that I could accept the 2 year agreement for both devices. I thanked him very much, took his name and ID# so that I might leave positive feedback about his exemplary customer service and was then transferred to the automated service.
Once transferred to the automated service I was then prompted to enter both telephone numbers for the devices that would be upgraded, I was then required to accept the new 2 year agreement for both devices and after doing so I was required to end the call. I did so in an orderly fashion and expected a confirmation # to arrive in my email regarding the placed order.
I have never received a confirmation email. I decided to sleep on it and assumed a confirmation email would be sent sometime tomorrow. Nothing has since been received however. I woke up early this morning around 6AM Alaska time to speak to another live chat representative, Bryan, in the billing department who assured me the order was currently processing and verified the order #. I asked him whether or not it was typical for a customer to not receive a confirmation email for an order placed and he said it can sometimes take up to 2-3 business days. He then stated that he had taken note of the issues I was experiencing and told me he would transfer me to the sales department as they would be able to provide more information regarding the shipment of both devices and a confirmation email, as he stated he did not want me to have to wait any longer than necessary to receive said devices.
I was then transferred to Devon in the sales department via the live chat service where I was then required to repeat everything I had said to both Bryan and the other representatives I had spoken too. After a lengthy discussion and repeating everything I have just wrote he told me the order was indeed processing and that he would send a confirmation email in the next 30 minutes.
That was 2 hours ago. It is now 8am Alaska time and I still have not received a confirmation email regarding my order. I was sent an email by Verizon an hour ago stating I had a device to "discover". The email contained no information regarding the shipment of my device, the order confirmation number, or anything regarding my account. The email I received was a typical spam email asking an individual to check out the current available phones and sign up for a new contract.
All I want is a confirmation email to assure that the devices are being sent. I need my phone for work and to communicate with my family in the lower 48. I desperately need to make sure that the device is in fact being sent to the proper address, this is why a confirmation email of the order is so important. I do not care about the shipping speed I just want what I ask to be taken care of for a change. I would hate to sit here unable to determine what the status of my devices are only for the order to be stuck in "processing" limbo and be unable to receive the devices when I was told they would be sent.
I feel I have been given the run around treatment way more than is typically given with any company when an individual is trying to work towards a solution. I have been patient and cordial with everyone I have spoken with, I have not raised my voice or shown stress or anger towards the situation I have only tried my best to work towards a solution with anyone I have spoken too but I am becoming increasingly frustrated with this situation.
Any help regarding this matter would be greatly appreciated. This situation has left a sour taste in my mouth and if the devices were indeed not actually processed in an order, or they were not shipped correctly, or in fact if the order had never existed at all it will only deter me from keeping my Verizon account active and affect my decision to switch to another provider.

Hello APVzW, we absolutely want the best path to resolution. My apologies for multiple attempts of replacing the device. We'd like to verify the order information and see if we can locate the tracking number. Please send a direct message with the order number so we can dive deeper. Here's steps to send a direct message: http://vz.to/1b8XnPy We look forward to hearing from you soon.
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

How to change the ESS objects, iViews and Pages, translation in the portal?

Hello everyone,
I'd like to change the standard SAP translation for iView and Pages in the Portal level. Does anybody knows how to do this?
My landscape is NW2004s and ESS for ECC 6.0
Regards
Luciano

you can change the standard SAP iViews and Pages using the Portal Content Translation feature of the Portal ( go to Content Administration->Portal Content Translation. Follow the instructions at
http://help.sap.com/saphelp_nw04/helpdata/en/25/08174082fe1961e10000000a155106/frameset.htm
all ESS iviews and pages have their content "ready for translation" and you can use the instructions above to translate that content.
Tiberiu
please award points if response was useful.

Placing the ux3 Shell in sap.m.Page causes its header to disappear

Hi Community,
I want to have a common Navigation Links for the complete SAPUI5 application , so my preferred choice was ux3.Shell. But while placing the ux3.Shell in sap.m.Page , its header is overridden by that of page . How to avoid this ? Or is there any other way to structure this typpe of requirement for responsive application ?
PFB the screenshot :
Suggestions are welcome.
Regads
Mayank

Hi Hendrik,
Did you check by right clicking on the shell and giving inspect element whether the shell has the splitapp div inside it?
if so then check whether it has got some width and height if not try to give it inform of pixels instead of percentage
Regards
Raghu

Getting the profile of all iviews in a page

Hi All,
I am having 2 iViews created from a single par in a page.
These iviews display some data in the form of a tree view.
The content of these iviews are different and are based on
a profile property value specified in portalapp.xml.
On click of the personalize option, another component (page) is
invoked which displays a similar tree view which can be edited.
The problem is this works fine if there's only one iview in a
page. If there are two or more iviews, the profile property
value retrieved got in the code is the same for all the iviews which
should actually be different for different iviews.
Can anyone guide me how to get all the profile properties correctly?
Regards,
Karthick

Try different values for the Isolation Method property of the iViews (embedded or pumped or url):
http://help.sap.com/saphelp_nw04/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm

Placing iViews into Web Page Composer Web Page

Has anyone got this work?
I have unhidden the PCD so that it is visible in the KM directory.
I have created the entry point for iviews.
When trying to add iviews to a page, I could not navigate to the "pcd" folder in KM, so I went to KM and copied my iviews to the folder I created for the entry point (as the SP12 document suggests "/wpccontent/iviews").
I can then select them to add to a page, but in preview or runtime, the iviews do not appear on the web page.
I realize that the WPC is just a ramp-up/beta, but has anyone else made this work?
Regards

Success!
I think the solution (somehow) is configuring the initial permissions in the Security Zones.
The only problem is that the documentation is incorrect. The correction is in an SAP Note.
Below is the configuration (correction is bolded!):
Documentation says:
Defining Permissions for Security Zones
1. Navigate to Security Zones → com.sap.nw.wpc → wpc (not pagebuilder!). (The documenation says com.sap.nw.pagebuilder. This is incorrect!)
2. Define permissions for Web site owners and, if necessary, for authors.
a. From the context menu of the medium_safety folder, choose Open Permissions.
b. Give the wpc_editor_role role - or a user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
3. Define permissions for users.
a. From the context menu of the no_safety folder, choose Open Permissions.
b. Give the everyone group - or another user group - the permission End User.
You can leave the default entry for the Administrator column as None.
c. Choose Reset Child Permissions.
d. Choose Save.
I made this change, and now I can see iviews in the page. I won't swear this is the solution, but that is the only change I have made lately.

Can i display My application iview and transaction iview in single page ?

Hi,
I am new in web dynpro and portal. i am doing one approval application through web dynpro. Now i need to attache sap inbox to application. For that some budy suggested me about transaction view. So my questions are as folloes.
1.> How i attached my application to iview ?
2.> How i created Transaction iview ?
3.> Can i attache my application iview with transaction iview if it is possible then how ?
4.> Can i display My application iview and transaction iview in single page ?
Please guide me in this procesure.
Regards,
Gurprit Bhatia

Hi Gurprit,
1.> How i attached my application to iview ?
       You can attach your application to web Dynpro IView, for this login into portal, in the Content Management tab right click on a folder, then New --> IView. Select WD java Application. Select your application and create an Iview.
2.> How i created Transaction iview ?
       Similarly, instead of selecting WD java Application, select iView template, you will get a list of available templates, and in this you will find template for Transaction Iview, in this template define the Tx for which you want to create the template.
3.> Can i attache my application iview with transaction iview if it is possible then how ?
      No, I dont think you can attach your application to transaction Iview. but, you can attach both IViews on single page.
4.> Can i display My application iview and transaction iview in single page ?
      Yes, you can attach both IViews on single page. Again in Content Management tab, crate a PAGE; Then right click on created IViews and select add IView to Page ßß: Delta Link.
Hope this helps.
Regards,
Amit

How can i display my iviews in anonymous page

hi experts,
I have created some iviews and I have created a role for all these i views and assigned this role to anonymous user group.
when i access the anonymous page,i get the info"contents not exsits or not enabled",well how can i display my iviews in anonymous page
best regards,
zlf

This page may help
http://help.sap.com/saphelp_nw04s/helpdata/en/1e/e19f58136e654d9709befa464314f2/content.htm

Web dynpro iview in web page composer ?

Hi All,
I am developing one Web site by using Web Page Composer. Can anyone help me for how to use Web Dynpro iview on web page.
Regards,
Rahul.

HI Rahul,
As of now we can not include a Web Dynpro iView on the WPC page like other iViews.
But you can try to create a URL iView from Web Dynpro application
and then add that URL iView to your page.
_Vishal

Can anyone expalin to me the following properties in the Web Dynpro Iview P

Hi all,
Can anyone expalin to me the following properties in the Web Dynpro Iview Properties Editor--
Authentication Scheme
Can be Merged
Default Entry for Folder
Entry Point
Show Debug Screen
Tray Type
Points assured for help

Hi shobhendra srivastava,
1) An authentication scheme is a definition of what is required for an authentication process. In the iView you can set what authentication process (UserName/Password, X.509 certificate, etc.) the iView requires. Find more information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/90/52c43dac1bcf51e10000000a114084/frameset.htm">here</a>.
2) The attribute "Can be Merged" allows you to merge certain objects (worksets, pages, iviews) under the same point in the portal navigation structure. All objects with the same value for attribute "Merge ID" are merged together. The object with the highest value for attribute "Merge Priority" provides the name displayed in the navigation elements (tabs in TLN and links in Detailed Navigation)
3) Find a good explanation of the attribute Entry Point <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/4e/3e703e632c7937e10000000a114084/frameset.htm">here</a>.
4) If this parameter is "true" a debugging screen is displayed before starting the WebDynpro application. Make sure that the parameter DebugMode in the service configuration (=>Applications=>com.sap.portal.appintegrator => Service => Common_Configuration) is not 'false' if you want to use this feature.
5) The attribute Tray Type defines the design of the iView's frame. The attribute can take the following values:
fill: The content area appears with a background color
plain: The content area appears with a white background and a frame
transparent: The background is transparent and the content area appears without a frame
Hope I could help!
Best regards,
Martin

Interaction between two iViews on one page

Hi Everybody!
I have have one question and if you think I am blind, then I apologize for this.
I have two iViews on a page. The First (iView 1) is showing a Link List from KM
and the second (iView 2) is showing the content of an external link.
I would like to implement the following logic:
When the user clicks on a Link in iView 1, the content should appear in iView 2.
Can this be done with standard iView parameters or do I need to implement it on my own?
Thanks a lot and kind regards
Ingo

hi
KM navigation has a core par file in USR(installation) directory com.sap.km.navigation use it in IDE eclipse or nwds and alter the code using epcf and rename it as your class and redeploy it and make it as a template.
you can use this way otherwise please do see the proerties of KM navigation iview which may suggest the way out.hope this helps you .while using the code you have to implement epcm.donavigate and paa parameters to other iview.please don,t forget to give points
with regards
subrato kundu

Moving exisiting iview to new page in MSS buisness package

Hello there,
We are using the MSS bp for ECC 6.0.
I want to change location of existing iview from the general information page to a differ existing page.
I want to use FPM to support events between this iview to the search employee iview.
Is it possible to do this without any code development?
Thanks
For the help
Nir

Thanks Anup & Bala for the quick response.
I know it is possible to use code and solve the problem.
Since I don't want to change the iview content only location I thought it possible to do this with the FPM view editor.
Regards
Nir

Iviews in home page not visible when I assign eu_role to portal users

Hey guys,
For the tool area search, I had access denied error. So I have assigned eu_role to the portal users and I am able to search now in the tool area.. But the problem is when I assign this eu_role to the portal users I am not able to see some iviews in my home page.. Like I had webdynpro iview and km document iview which are not visible now. And in place of KM document iview its showing me with this message:
Links :There are no items to display (Organize Entries)
Suggest me with some help.
Regards
PP

Hi Priyanka,
Just refer these helps for getting idea on PCD Repository Manager.
http://help.sap.com/saphelp_nw04/helpdata/en/76/a8934259a5cc6ae10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b2/d59a4271c80a31e10000000a1550b0/content.htm
It is clearly mentioned in this document that ,
<i>To index the PCD repository, always choose the Portal Roles Search service. Do not choose the services TREX Search or TREX Search and Classification, because these services index the entire PCD. Thus, the search results would also contain iViews and portal pages that are not part of the role of the logged-on user. This ensures error-free navigation.</i>
Regards,
Kishor Gopinathan

How to include iview from one page to another using FPM

Dear experts
using ECC6 NetWeaver 7
I have followed this WIKI guide step by step.
How to include iview from one page to another using FPM?
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=118423928
On step 4 I couldnu2019t create an Iview based on view u201Cpersonal datau201D u2013 it was not possible.
The view wasnu2019t there (in comprehend to the WIKI)
What could be the reason?
I have full authorization on the portal.
Thank in advance for your help.

Please check this.
Re: Organizational History iView
/thread/370447 [original link is broken]
Regards,
Sandip

2 generic table iviews in 1 page in 7.0

Im working on a mss-solution in 7.0, where I need to have 2 or more generic table iveiws in one page, working together with the generic employee seach iview. But I cant get it to work. As soon as I put 2 different table iveiws on the same page, the content in the 2 tables is identical, dispite they are reporting 2 different queries.
If I do the same in 5.0 or 6.0, it works perfectly.
Has anyone experienced the same and found a solution?

Hi,
It is possible to have a page with two generic table iviews displaying different content!. The issue of the two
generic table iViews showing up with the same content on your installation might be caused by creating the iViews based on the SAME FPM-view assigned to the corresponding FPM-application.
Let me give you a brief step-by-step description of how to create a page containing two generic table iviews displaying different content based on the Generic iView Testpage:
1. Go to Self-Service Administrator and open the FPM-Application belonging to 'Test Generic iView'. Path is 'Portal Content -> Content provided by SAP -> srvconfig -> com.sap.pct.erp.srvconfig.mss -> Generic iView'. Open the corresponding FPM application
Select step 'Define Perspectives'
2. Select the 'Generic iView table' FPM view from 'Generic iView'-> FPM Views and choose 'Add FPM view to perspective'
    via right mouse-click menu.
3. Enter an ID for the view within the perspective and maintain the properties accordingly (i.e. enter an appropriate query)
4. Save the FPM Application..
5. Go to Content Administration.
6. expand 'Portal Content -> Content provided by SAP' -> line_manager -> iViews
Choose 'New iView' from right mouse menu.
7. Choose 'Web Dynpro Java application' and press 'Next'
8. Choose 'Create one iView from each application view' and press 'Next'
9. Choose your 'Generic iView Table' under msseeprogenericiview -> com.sap.xss.hr.eeprofile.genericiview.TestGenericIview
-> TestGenericIview and press 'Next'
10. Fill in iView Name and ID and press 'Next'
11. Deselect 'Open page wizard to create WebDynpro page' and press 'Next
12. Press 'Finish'.
13. Choose 'Close wizard' and press 'Ok'.
14. Open the 'Generic iView Test' page under 'Pages -> HCM'
15. Select the new iView create as described above and choose 'Add iView to page' -> 'Delta Link' via right mouse menu
16. Adjust Page Layout if necessary.
17. Save the 'Generic iView Test' page
Follow the above guide to add a second Generic Table iView to your Test Page. The page should show up then with two list and two table iViews and a TeamViewer. After selecting an employee in the TeamViewer the two generic table iViews should show up with different content.
I suggest you to go through the link https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=118423928 , where I explained how you can include iview from one page to another.
Regards
Pooja

Regarding the placing of iviews in a Page

Similar Messages

Maybe you are looking for