Regarding the select-options on the selection screen

In select-options the low and high fileds must be displayed in the following explained manner...
How to get the low field value as 1000 (default) and it must be in display mode (not possible to change the value) and high field must be empty and it has to allow us to enter the value.
How to get this....?
Please help me in this regard...
Thank u very much
Regards..
Nagarjuna

TABLES : mara.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
INITIALIZATION.
S_MATNR-SIGN = 'I'. "inclusion
S_MATNR-OPTION = 'BT'    "between
S_MATNR-LOW = '1000'.
APPEND s_matnr.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name EQ 'S_MATNR-LOW'.
      screen-input = 0.
      MODIFY screen.
      EXIT.
    ENDIF.
ENDLOOP.
Reward if Helpful.

Similar Messages

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

Output from tables which I mention in select options of the screen as input

Dear All,
I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
e.g. If i put table name as an input i.e. MARA in select option .
In program how to write select query to get records from that table ?
SELECT MTART MATKL from MARA
Every time I should not go to select query of program & replace the tablename.
How to solve this problem ?

Hi,
PARAMETERS p_table(30)." type string.
"This is a Tested code Just Execute and Check
START-OF-SELECTION.
DATA: lt_tmp TYPE REF TO data.
DATA : line TYPE REF TO data.
FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
ASSIGN lt_tmp->* TO <lt_tmp> .
CREATE DATA line LIKE LINE OF <lt_tmp>.
ASSIGN line->* TO <wa>.
SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
IF sy-subrc = 0.
    LOOP AT <lt_tmp> ASSIGNING <wa>.
      DO.
        ASSIGN COMPONENT sy-index
           OF STRUCTURE <wa> TO <dyn_field>.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        IF sy-index = 1.
          WRITE:/ <dyn_field>.
        ELSE.
          WRITE: <dyn_field>.
        ENDIF.
      ENDDO.
    ENDLOOP.
ENDIF.
Cheerz
Ram

Select options -restricting the operator value options.

Hi,
In selection screen for the select options or parameter declarations I need to restrict the operator options , like when they click for any select options it will give options to select = , #, <, <= , > , >=
all these options right.
I would like to restrict the user to select only > and >= while passing values.
Can anyone give me idea how I can approach this?
Thanks in advance.

Hi,
use this FM...
SELECT_OPTIONS_RESTRICT can be use to supress options available with a SELECT-OPTIONS on a selection screen.
jusy copy the code and execute it....It will give the exact output what u want.....
TYPE-POOLS sscr.
TABLES : marc.
*Define the object to be passed to the RESTRICTION parameter
DATA restrict TYPE sscr_restrict.
*Auxiliary objects for filling RESTRICT
DATA : optlist TYPE sscr_opt_list,
*** TYPE sscr_***.
*Defining the selection-screen
SELECT-OPTIONS : s_matnr FOR marc-matnr,
s_werks FOR marc-werks.
INITIALIZATION.
*Restricting the MATNR selection to only EQ and 'BT'.
optlist-name = 'OBJECTKEY1'.
optlist-options-eq = 'X'.
optlist-options-bt = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_MATNR'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY1'.
APPEND *** TO restrict-***_tab.
*Restricting the WERKS selection to CP, GE, LT, NE.
optlist-name = 'OBJECTKEY2'.
optlist-options-cp = 'X'.
optlist-options-ge = 'X'.
optlist-options-lt = 'X'.
optlist-options-ne = 'X'.
APPEND optlist TO restrict-opt_list_tab.
***-kind = 'S'.
***-name = 'S_WERKS'.
***-sg_main = 'I'.
***-sg_addy = space.
***-op_main = 'OBJECTKEY2'.
APPEND *** TO restrict-***_tab.
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
EXPORTING
restriction = restrict
EXCEPTIONS
too_late = 1
repeated = 2
selopt_without_options = 3
selopt_without_signs = 4
invalid_sign = 5
empty_option_list = 6
invalid_kind = 7
repeated_kind_a = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards
Kiran

Can you pass a hidden value along with your select option in the form selec

Can you pass a hidden value along with your select option in the html form select

Off topic. Locking.

Have new update but when i am on trying to sync I have no scroll down bar to select option on the bottom of pages so sync is not done with all i want on it. Using my arrow keys also dont work. I have deleted itunes

Have new update but when i am on trying to sync I have no scroll down bar to select option on the bottom of pages so sync is not done with all i want on it. Using my arrow keys also dont work. I have deleted itunes and reinstall but its still the same. Any ideas?

iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?

How to select option to the particular view container

Hi All,
I am working on ALV , i have view container for search parameters, here i want to add select option in to the same view container.. anyone help me to achive the same.
Thanks
Ram

As Tamil said above, you have to put the select options in the view that you are embedding in the view container. For help on how to use select options in webdynpro, you can have a look at the tutorial in the following link...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09fec07-0dab-2a10-dbbe-c9a26bdff03e

I can access a website and select the 'print' option but the print misses out

I can access a website and select the 'print' option but the print misses out photos that should be included in the print. It happens on more than one website. If I use Explorer it doesn't happen. I guess there must be a setting or something that I have not found? Any help very gratefully received. Than you.

I don't know if this will help, but I found it by accident. When I send Word projects to recipients, it doesn't always read properly depending on their format. If they have a PC It distortes my program, or they may have newer versions of Word. If you have your document showing select 'print' and on my print menu at the bottom left corner it has a button that says 'PDF'. Click on that and it gives you several options for a PDF. What I do if I'm emailing to someone is select the email option then you can always print from the email. Hope that helps.
jr

The size of your selected options exceeds the available space

I am trying to install a brand new full version of Adobe Creative Suite 4 Web Premium.
I am unable to proceed, as the install options window tells me "The size of your selected options exceeds the available space" with a red exclamation point.
It says my options require 9.6GB of space.
I am trying to install on my D Drive, which has 1.1 TB of available space. Yes, that's right, Terrabytes.
Help!
System: Intel Core2 Quad Q6600 @2.4 GHz, Windows Vista Ultimate 64 bit SP1, 4 GB RAM, system drive WD Raptor (75GB) and main drive (where I am trying to install CS4) is (6) 500GB seagate SATA hard drives in a 2.5TB RAID 5 array. Motherboard is a Gigabyte GA-P35-DQ6 and video is an Nvidia GEForce 8800GT (512 RAM). RAID controller is onboard the motherboard (Intel ICH8R)

SOLVED!
Bob and Peter, you nailed it.
I had inadequate room on the C drive...I was down to only 5 GB of space.
I cleaned up the desktop (The wife thinks that is a great place to store everything) and freed up my C drive so it had just over 10 GB of free space, and the red exclamation point went away. It is now happily installing onto my D drive.
Ian, my C drive (system) is a Western Digital Raptor...10,000 RPM. They are really small (75GB) but really fast so that windows boots up really quick. It is a performance thing. My D is a RAID array for redundancy...as I cannot afford to lose my pictures, videos, and documents, etc. - and I always keep my program installs on D so as to keep the C drive speedy and un-cluttered - plus if and when windows gets corrupted (which it does once every couple of years for some reason), I can re-do it in 5 minutes with an image using Acronis True Image.
Thanks to all of you for your ideas, and I am glad I got it solved. If any Adobe employees read this...you can at least throw in some nice paper manuals for the software. When software is $1600.00 I'm not real concerned about saving another tree - and you shouldn't be either...I'd rather have some paper manuals for reference when I buy a full retail package. So pump up the packaging please. Thanks!!!!
Shane

Off Set on a Select Option on the Query

Hi Peolpe,
How can i do to put a Off set on a select option on the query ?
Thanks.

Hello rafael,
When you restrict any char. with a variable just right click on the variable, you will see the option on the contex menu.
Sarhan.

Adding default value for a select-options in a selection-screen

hello gurus,
i have a report program with the following select-options in a selection-screen block:
select-options: so_site for MyTable-werks.
i want the so_site to have a default value once the program displays. can it be possible?
regards,
sid

Hi sid,
1. Whenever we use select-option,
an internal table of type range is
automatically created.
2. so, in fact, we have to put
record in this internal table.
3. eg. Just copy paste in new program.
4.
report abc.
tables : t001.
select-options : bukrs for t001-bukrs.
initialization.
bukrs-sign = 'I'.
bukrs-option = 'EQ'.
bukrs-low = '1000'.
append bukrs.
regards,
amit m.

Default Current year in select option field on selection Screen

Dear Experts,
I want to set current year as default value in fiscal year select-options field on selection screen.
for this, i hv written following code
DATA:VAR_DATE TYPE SY-DATUM.
DATA VAR(4) TYPE C.
VAR_DATE = SY-DATUM.
VAR = VAR_DATE+0(4).
this retrieves current year .
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT VAR TO VAR..                            "Fiscal Year
SELECTION-SCREEN END OF BLOCK B1.
Now when i am executing program pop-up is raised describing "Specify the range Limits". Please help.
Regards,
Apoorv Sharma

>
Ganga Bhavani R wrote:
> Use below lines.
>
> SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-000.
> SELECT-OPTIONS I11 FOR ANLC-GJAHR DEFAULT SY-DATUM+0(4). "Fiscal Year
> SELECTION-SCREEN END OF BLOCK B1.
Hi, Ganga,
I think it will not working properly that way, Please test the bellow Sample Code.
TABLES: anlc.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-000.
SELECT-OPTIONS i11 FOR anlc-gjahr .
SELECTION-SCREEN END OF BLOCK b1.
INITIALIZATION.
IF i11[] IS INITIAL.
    i11-low = sy-datum+0(4).
    APPEND i11.
ENDIF.
Thanks and Regards,
Faisal

Getting select options in module pool screen

hi experts,
can any one suggest me how to provide select options in module pool screen.
thank you,
regards
vijay

Hi,
Take two fields on screen first for low value and other for high value (say vbeln_low and vbeln_high) also design a button next to the high textbox for select-option button used to display popup.
Using these two input fields append a range (say r_vbeln for vbap-vbeln) for the field to be used (either in query or anywhere).
ranges : r_vbeln for vbap-vbeln.
IF NOT vbeln_high IS INITIAL.
    IF NOT vbeln_low LE vbeln_high.
      MESSAGE e899 WITH text-007. "high value is smaller than low value
    ENDIF.
ENDIF.
r_vbeln-sign = 'I'.
r_vbeln-low = vbeln_low.
IF vbeln_high IS INITIAL.
    r_vbeln-option = 'EQ'. "if user takes only a singlr value
ELSE.
    r_vbeln-option = 'BT'. "if user takes both low & high value
    r_vbeln-high = vbeln_high.
ENDIF.
APPEND r_vbeln. "append range
CLEAR r_vbeln.
On the button click call this FM to call a popup for select-options.
DATA : tab TYPE rstabfield.
tab-tablename = 'VBAP'.
tab-fieldname = 'VBELN'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
   EXPORTING
     title                   = text-002
     text                    = ' '
     signed                  = 'X'
*         lower_case              = ' '
*         no_interval_check       = ' '
*         just_display            = ' '
*         just_incl               = ' '
*         excluded_options        =
*         description             =
*         help_field              =
*         search_help             =
     tab_and_field           = tab
    TABLES
      range                   = r_vbeln
   EXCEPTIONS
     no_range_tab            = 1
     cancelled               = 2
     internal_error          = 3
     invalid_fieldname       = 4
     OTHERS                  = 5.
IF sy-subrc EQ 2.
    MESSAGE s899 WITH text-003. "no value selected
ELSEIF sy-subrc <> 0 AND sy-subrc <> 2.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
This whole code will append your range r_vbeln to be used in program.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Regarding the select-options on the selection screen

Similar Messages

Maybe you are looking for