Regarding the simple ALV report
Hi All,
I created the simple code for disply of the alv report the code is provided below,but the output is showing only the column heading not the data in the grid, i won't came to know where the problem is please find the problem in the code.
Regards
Sai
********sample code**********
type-pools : slis.
data : b_display type slis_t_fieldcat_alv,
w_display type slis_fieldcat_alv.
data : begin of itab_display occurs 0,
kunnr type kna1-kunnr,
name1 type kna1-name1,
end of itab_display.
data : gd_repid like sy-repid.
itab_display-name1 = 'ram'.
itab_display-kunnr = '10000033242'.
append itab_display.
clear itab_display.
itab_display-name1 = 'sai'.
itab_display-kunnr = '10000033243'.
append itab_display.
clear itab_display.
w_display-col_pos = 0.
w_display-fieldname = 'name1'.
w_display-seltext_m = 'name'.
append w_display to b_display.
clear w_display.
w_display-col_pos = 1.
w_display-fieldname = 'kunnr'.
w_display-seltext_m = 'cus.no'.
append w_display to b_display.
clear w_display.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = gd_repid
IT_FIELDCAT = b_display[]
I_SAVE = 'X'
TABLES
t_outtab = itab_display.
Hi,
Please use the following code.
type-pools : slis.
data : b_display type slis_t_fieldcat_alv,
w_display type slis_fieldcat_alv.
data : begin of itab_display occurs 0,
kunnr type kna1-kunnr,
name1 type kna1-name1,
end of itab_display.
data : gd_repid like sy-repid.
itab_display-name1 = 'ram'.
itab_display-kunnr = '10000033242'.
append itab_display.
clear itab_display.
itab_display-name1 = 'sai'.
itab_display-kunnr = '10000033243'.
append itab_display.
clear itab_display.
w_display-col_pos = 0.
w_display-fieldname = 'NAME1'.
w_display-tabname = ITAB_DISPLAY.
w_display-seltext_m = 'Name'.
w_display-ddictxt = 'M'.
append w_display to B_DISPLAY.
w_display-col_pos = 1.
w_display-fieldname = 'KUNNR'.
w_display-tabname = ITAB_DISPLAY.
w_display-seltext_m = 'cus.no'.
w_display-ddictxt = 'M'.
append w_display to B_DISPLAY.
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = gd_repid
IT_FIELDCAT = b_display[]
I_SAVE = 'X'
TABLES
t_outtab = itab_display[].
Regards,
Sankar.
Similar Messages
-
Example of a Simple ALV Report using Function Modules (not OO)
Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PMHi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
werks TYPE ekpo-werks,
menge TYPE ekpo-menge,
END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
IMPORTING
* E_EXIT =
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo
INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
i_callback_user_command = 'COMMAND'
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
i_grid_title = wa_title
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_field
it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant
it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
WHEN 'T_DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL DOWN'.
WHEN 'DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'DOWN'.
WHEN 'UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'UP'.
WHEN 'T_UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir -
Creating a simple ALV report based on join condition
Dear All
SAP Version: ECC6 EHP7
I wan to create simple ALV report based on join condition. can anyone provide me the complete steps to create this report.
Regards,Hi Syed,
Please check the link,
ALV report - Joining 2 tables
Regards,
Prakash. -
Different between coding of simple ALV report and interactive ALV report
Hi
Please some one tell me the difference (extra coding) for interactive ALV report.
I know how to design simple ALV report but i dont know what extra I hace to code for interactive ALV report.
Thanks in advance.View at se38, ALV grid demos, search BCALGRID
-
How to make the field in the output ALV report editable ?
Hi,
I have a requirement to make fields like MATNR,WERKS in the output ALV report editable . Could any of you help me with this ?.
Thank you.
Moderator Message: Search.
Edited by: kishan P on Sep 6, 2010 6:35 PMHi
Please for available information on SCN. There are a lot of information on SCN about ALV wit hEDIT functionality.
Regards
Abhii -
A simple ALV report using classes & methods ...
i want a simple ALV report using classes & methods ...
my requirement : i have to use classes & methods instead of calling a function module to display in grid or list format.
plz send me with explanation ASAP...it's very urgent..
Thanks in advance .Hi
Please refer
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
U can use methods for vreating ALVs.
There is a method named set_table_for_first_display in OOP Concepts.
Use this Object Oriented Approach for ALV Creation
Calling the method set_table_for_first_display
CALL METHOD cust_alv->set_table_for_first_display
EXPORTING
is_layout = gst_layout
CHANGING
it_outtab = gt_list
it_fieldcatalog = gt_fcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Object Creation and all
Creation of Object for Container
CREATE OBJECT cust_container
EXPORTING
container_name = 'ALV_CONTAINER'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Creation of Object for ALV Grid
CREATE OBJECT cust_alv
EXPORTING
i_parent = cust_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Layout settings
gst_layout-zebra ='X'.
gst_layout-cwidth_opt = 'X'.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'ZCS_INACTV_CUST'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Calling the method set_table_for_first_display
CALL METHOD cust_alv->set_table_for_first_display
EXPORTING
is_layout = gst_layout
CHANGING
it_outtab = gt_list
it_fieldcatalog = gt_fcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
For object oriented concepts refer this link https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
Reaward if helpful -
How to find the customised alv reports
Hi guys,
I m working on a alv-grid report in PP.I want to know how can i find the alv reports already been created in the system.
Thanks in advance.hi,
GO to se37
give the fm name
reuse_alv_grid_display
reuse_alv_LIST_display
and clik the where used list
and select programs
and in that list check out the zprograms or y programs
then you can see it
regards,
Venkatesh -
Simple alv report displaying double click on that goto application
HI Experts,
i will working for that simple alv display the report . when ever user double click on that go to next scren . i will work for ECC 6.0 and function module is REUSE_ALV_LIST_DISPLAY i will write the logic is
at user-command
SET PARAMETER ID 'LIF' VALUE FVAL.
CALL TRANSACTION 'LF03' AND SKIP FIRST SCREEN.
so any body plz help me.
advance thanking u.Hi
try this code...
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = W_PROG
I_CALLBACK_USER_COMMAND = 'PICK'
I_STRUCTURE_NAME = 'EKKO'
TABLES
T_OUTTAB = T_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form pick
* -->UCOMM text
* -->SELFIELD text
FORM PICK USING COMMAND LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
READ TABLE T_EKKO INTO FS_EKKO INDEX SELFIELD-TABINDEX.
CASE COMMAND.
WHEN '&IC1'.
SET PARAMETER ID 'LIF' VALUE FS_EKKO-EBELN. "here write your field name
CALL TRANSACTION 'LF03' AND SKIP FIRST SCREEN. -
Regarding events in alv reports
Dear Friends,
Sorry for this post, Events not triggering in alv reports. There is no errors and no warnings.I am using interactive reports. Please tell me where could be i went wrong. It is displaying basic list information but with out events triggering.Hi,
go through the following piece of code..........
*& Form EVENT_CALL
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
I_GRID_SETTINGS =
IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'ZLAY1'
I_SAVE = 'A'
is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
text
-->R_UCOMM text
-->, text
-->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form event_call_ekpo
we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo =
I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
Thanks
Ashu -
Adding check boxes to the output ALV report ?
Hi,
I have a requirement to add checkboxes as the first field in the output of an ALV report for all the records. Can any of you help me with this ?.
Thank you.Hi,
You can add checkbox using ALV grid display.
Call your ALV grid as below. Pass 'wa_layout' with 'WA_LAYOUT-BOX_FIELDNAME' as your selection column name.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'F_GUI_STATUS'
I_CALLBACK_USER_COMMAND = 'F_USERCOMMAND'
I_GRID_TITLE = TEXT-026
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = I_FIELDCAT
TABLES
T_OUTTAB = I_OUTTAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
Check below link for more help.
[http://www.sapfans.com/forums/viewtopic.php?t=40968]
Thanks,
Archana -
Regarding the performance in report
Hi Abap Gurus,
i am working on the report. my requirement is that after executing the report data gets extracting after 11 hours.the required data is comonf perfectly. how to improve the performance. any tips to follow the performance in the report. if possible post the code.
Moderator Message: Please search the forum for available information.
Edited by: kishan P on Oct 19, 2010 4:50 PMHi,
Please check below thread;
Extract from ALV List
Regards
Jana -
Regarding downloading from alv report o/p to excel sheet
Hi gurus,
When i am trying to download the alv output to excel sheet it is downloading only titles, No data is getting displayed in it.No data is getting downloaded.
Thnaks in advance.Hi,
What are the steps you do to download ALV to excel? We need to replicate the case in order to find answer.
Regards,
Teddy Kurniawan -
Regarding the Crystal Xcelsius Report
Hello Experts,
I am new to buisness Intelligence ...
I have task to create Celsiuse reports for SCM EWM.
I have the following doubt.....
so can you please let me know the procedure how to start?
Whether i have to extract data using extractor? if i extract data using extractor whenther it is available in
Xcelsius report?
Please provide me Crystal Xcelsius document for developing report.
Thanks and regards,
zuberaHello,
Thanks for your help.
Please give the link for business object site.
Thanks and regards,
zubera -
Displaying a Push button in the application toolbar for an ALV report
Hello everyone,
Query:
Is it possible to display a custom push button in the application tool bar while displaying an ALV report(1st one)?
On pressing this custom push button will I be able to display another ALV report(2nd one) based on the selection made on the current ALV report(1st one)?Yes u can have pushbutton on application toolbar.
You just have to use the new pf status in your report program.
You should copy the 'STANDARD' GUI status from program SAPLKKBL using transaction SE90 >Programming SubObjects> Gui Status.
Execute this transaction to get to next screen. select status using checkbox. click on GUI Status --> Copy.
Enter your Z program name and the name you what for this status - you can keep it as 'STANDARD' to be simple.
Then you can edit the new status to add or delete buttons. This will also bring in the standard SAP ALV functionality.
Have a look at below code for using the new status.
TYPE-POOLS: slis.
DATA: i_qmel LIKE qmel OCCURS 0.
data v_repid type repid.
SELECT * FROM qmel INTO TABLE i_qmel.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
i_structure_name = 'QMEL'
TABLES
t_outtab = i_qmel
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'TEST'.
endform.
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
data lv_ucomm type sy-ucomm.
lv_ucomm
= sy-ucomm.
CASE lv_ucomm.
WHEN 'BUTTON'. "Double Click line Item
**Write ur functinality here
endcase.
endform.
Also have a look at below links.
http://www.sap-basis-abap.com/abap/add-button-to-alv-toolbar-with-reuse-alv-list-display.htm
ALV report
Best Regards,
Vibha
*Please mark all the helpful answers -
Plz send me the code of interctive ALV report
Hi
plz send me the code of interctive ALV report
thanks in advance
rachuHi
<u><b>For More alv report examples check these Tcodes <i>LIBS, BIBS</i>Here u can find more number of examples on alv reports of different kinds</b></u>
Check this sample code
TYPE-POOLS: SLIS.
*type declaration for values from ekko
TYPES: BEGIN OF I_EKKO,
EBELN LIKE EKKO-EBELN,
AEDAT LIKE EKKO-AEDAT,
BUKRS LIKE EKKO-BUKRS,
BSART LIKE EKKO-BSART,
LIFNR LIKE EKKO-LIFNR,
END OF I_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
WA_EKKO TYPE I_EKKO.
*type declaration for values from ekpo
TYPES: BEGIN OF I_EKPO,
EBELN LIKE EKPO-EBELN,
EBELP LIKE EKPO-EBELP,
MATNR LIKE EKPO-MATNR,
MENGE LIKE EKPO-MENGE,
MEINS LIKE EKPO-MEINS,
NETPR LIKE EKPO-NETPR,
END OF I_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
WA_EKPO TYPE I_EKPO .
*variable for Report ID
DATA: V_REPID LIKE SY-REPID .
*declaration for fieldcatalog
DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
* declaration for events table where user comand or set PF status will
* be defined
DATA: V_EVENTS TYPE SLIS_T_EVENT,
WA_EVENT TYPE SLIS_ALV_EVENT.
* declartion for layout
DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
* declaration for variant(type of display we want)
DATA: I_VARIANT TYPE DISVARIANT,
I_VARIANT1 TYPE DISVARIANT,
I_SAVE(1) TYPE C.
*PARAMETERS : p_var TYPE disvariant-variant.
*Title displayed when the alv list is displayed
DATA: I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
DATA: I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
INITIALIZATION.
V_REPID = SY-REPID.
PERFORM BUILD_FIELDCATLOG.
PERFORM EVENT_CALL.
PERFORM POPULATE_EVENT.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATLOG
* Fieldcatalog has all the field details from ekko
FORM BUILD_FIELDCATLOG.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'AEDAT'.
WA_FIELDCAT-SELTEXT_M = 'DATE.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'BUKRS'.
WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKKO'.
WA_FIELDCAT-FIELDNAME = 'LIFNR'.
WA_FIELDCAT-NO_OUT = 'X'.
WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG
*& Form EVENT_CALL
* we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "EVENT_CALL
*& Form POPULATE_EVENT
* Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'USER_COMMAND'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-NAME.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form data_retrieval
* retreiving values from the database table ekko
FORM DATA_RETRIEVAL.
SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
ENDFORM. "data_retrieval
*& Form bUild_listheader
* text
* -->I_LISTHEADEtext
FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA HLINE TYPE SLIS_LISTHEADER.
HLINE-INFO = 'this is my first alv pgm'.
HLINE-TYP = 'H'.
ENDFORM. "build_listheader
*& Form display_alv_report
* text
FORM DISPLAY_ALV_REPORT.
V_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = V_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = I_TITLE_EKKO
* I_GRID_SETTINGS =
* IS_LAYOUT = ALV_LAYOUT
IT_FIELDCAT = I_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* i_default = 'ZLAY1'
I_SAVE = 'A'
* is_variant = i_variant
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKKO
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "display_alv_report
*& Form TOP_OF_PAGE
* text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
* i_logo =
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->, text
* -->RS_SLEFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
PERFORM BUILD_FIELDCATLOG_EKPO.
PERFORM EVENT_CALL_EKPO.
PERFORM POPULATE_EVENT_EKPO.
PERFORM DATA_RETRIEVAL_EKPO.
PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
PERFORM DISPLAY_ALV_EKPO.
ENDCASE.
ENDFORM. "user_command
*& Form BUILD_FIELDCATLOG_EKPO
* text
FORM BUILD_FIELDCATLOG_EKPO.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELN'.
WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'IT_EKPO'.
WA_FIELDCAT-FIELDNAME = 'EBELP'.
WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MATNR'.
WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MENGE'.
WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'MEINS'.
WA_FIELDCAT-SELTEXT_M = 'UOM'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-TABNAME = 'I_EKPO'.
WA_FIELDCAT-FIELDNAME = 'NETPR'.
WA_FIELDCAT-SELTEXT_M = 'PRICE'.
APPEND WA_FIELDCAT TO I_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "BUILD_FIELDCATLOG_EKPO
*& Form event_call_ekpo
* we get all events - TOP OF PAGE or USER COMMAND in table v_events
FORM EVENT_CALL_EKPO.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = V_EVENTS
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "event_call_ekpo
*& Form POPULATE_EVENT
* Events populated for TOP OF PAGE & USER COMAND
FORM POPULATE_EVENT_EKPO.
READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC EQ 0.
WA_EVENT-FORM = 'TOP_OF_PAGE'.
MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
WA_EVENT-FORM.
ENDIF.
ENDFORM. "POPULATE_EVENT
*& Form TOP_OF_PAGE
* text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
* i_logo =
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->, text
* -->RS_SLEFIELDtext
*retreiving values from the database table ekko
FORM DATA_RETRIEVAL_EKPO.
SELECT EBELN EBELP MATNR MENGE MEINS NETPR FROM EKPO INTO TABLE IT_EKPO.
ENDFORM.
FORM BUILD_LISTHEADER_EKPO USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
DATA: HLINE1 TYPE SLIS_LISTHEADER.
HLINE1-TYP = 'H'.
HLINE1-INFO = 'CHECKING PGM'.
ENDFORM.
FORM DISPLAY_ALV_EKPO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = V_REPID
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = 'F_USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = I_TITLE_EKPO
* I_GRID_SETTINGS =
* IS_LAYOUT =
IT_FIELDCAT = I_FIELDCAT[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT =
I_SAVE = 'A'
* IS_VARIANT =
IT_EVENTS = V_EVENTS
TABLES
T_OUTTAB = IT_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Try this links...
http://www.****************/Tutorials/ALV/ALVMainPage.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Reward all helpful answers
Regards
Pavan
Message was edited by:
Pavan praveen
Maybe you are looking for
-
Old items are not populated after adding items into a master/detail form
Hi, I am relatively new to APEX. I am creating a master/detail form. It works well. When I add new items the older items are no more populated. Why ? For example I have an itme which is a select list as a Named LOV. At creation of the row I want the
-
How can I export my Imovie events?
So I upgraded to 10 and I really hate that they moved everything into the Imovie Library package: it's like they don't trust us to see the raw files. I would like to export events to another operating system. Has anyone had any luck switching from AI
-
I shoot in raw (Canon 7D) and first do some balancing in Lightroom CS5, going on to further process some images in Photoshop (CS5). If the exposure is OK, toning in Lightroom on its own is generally all that's necessary. Should I then be saving the f
-
Receive complete SOAP Envelope as message
Dear all I have a web service that I have to consume which has a signature value in the SOAP header. In order that I can validate the signature with the message I would like to receive the complete SOAP envelope as (XML) message (<envelope>...<soap-e
-
Photoshop Elements 10 installation - Shared Technologies
I purchased ADOBE PHOTOSHOP ELEMENTS 10 from Amazon. I uninstalled a very old version of Photoshop 6 and then installed Photoshop Elements. It runs the installation through to the end and then rolls it back stating 'Shared Technologies' as the reaso