Regarding Title for the Screen

Hi,
I want the title of the screen as Title name along with date & time ( date & time from table ).
How can i set that ?
Waiting for ur Reply...
Regards
Srinath

Hi try this code ,
Here you can give the values inside p1 and p2.
DATA: title TYPE string,
      prog   TYPE string,
      p1(10) TYPE c,
      p2(10) TYPE c.
MODULE status_0100 OUTPUT.
title = 'TITLE_0100'.
prog = '...'.
p1 = '...'.
p2 = '...'.
SET TITLEBAR title OF PROGRAM prog WITH p1 p2.
ENDMODULE.
Regards,
Amit.

Similar Messages

Report Painter - title for selection screen

Hi
I have created a report for PCA within GRR1/2 transactions. When I run the report, at the initial screen where I select the period for example, there is no title on the screen, it just comes up as ": SelectioN". However when the report runs, I actually see the name of the report.
How do I add the name to the selection screen?

Hi,
I believe, the name of selection screen comes from the name of the Report Group, but I could be wrong...
Regards,
Eli

How can I create a Title for the worksheet in Discoverer Plus

Dear members,
I am using discoverer 4i Plus to create workbooks. I am not finding an option to insert a title for the worksheet. In Discoverer Desktop we have a separate option to insert or edit a title. I am not sure how can we create titles in Plus.
Any suggestions.
Thanks
Sandeep

Hi,
I am not able to login to Discoverer Desktop Using my Applications username. My Desktop Version is 4.1.37. The same username works in Discoverer 4i Plus and i can create workbook there.
I went to Tools--->Options--->Connections and checked the option connect to both standard and application EUL's and while i am logging in i checked the small box which comes in the login screen. I do not know why this happening.
I am also able to login as the database user in Desktop but not as an application user.
I want to login into desktop as an application user and create a template workbook which has title and then assign that workbook to a particular responsibility since creating title cannot be done in Plus.
I am not sure what's going wrong here because the Desktop works for database user but not for an application user. Any comments are highly appreciated.
Thanks
sandeep

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Error message 00 344 : No batch input data for the screen SAPMF02D 0324

Hi Experts,
We are working with SAP CRM 4.0 and SAP R/3 6.20
We have an important number of BDocs (type 'BUPA_MAIN' ) in status E02 with the error message
00 344 : 'No batch input data for the screen SAPMF02D 0324'.
Can any one help us to explain the cause of this message and how to resolve it ??
Thanks you in advance for your help !
Best regards,
Nabil.

Any ideas ?
We really appreciate your help !

How to get the screen groups for the screen field which are on selectionscn

hiiii Experts,
               How to know the screen groups for the screen field which are on selection screen.
Thanks and regards,
kasyap

     NAME                                             PNPABKRS-LOW
        GROUP1                                             SEL
        GROUP2                                             DBS
        GROUP3                                             LOW
        GROUP4                                             180
to get this use this:
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    if screen-name CS 'ABKRS'.
      BREAK-POINT.
    endif.
ENDLOOP.

Browser tab title for the site goes away.

I have modified my master page to show the Title for the Site Home page in the Intranet Portal. The tag in the master page reads this:
<title id="Title1" runat="server"><asp:ContentPlaceHolder id="PlaceHolderPageTitle" runat="server">ABC</asp:ContentPlaceHolder> </title>
When I browse the site in IE, the title "ABC" shows up in the browser tab but goes away after some time. In chrome, it gets replaced by the URL of the Site page:
http://site/pages/default.aspx. It only happens when i'm on the Site Home page. When i'm on a different page or within sub-site, it retains the Name of that page. How can I resolve this so that Title stays as long
as I'm on the site home page.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

Hi K-Joshi,
According to your description, my understanding is that you want to customize the browser title for a site in SharePoint 2010.
Please change the Title tag in your master page as the followings:
<title id="Title1" runat="server">
<SharePoint:EncodedLiteral runat="server" text="ABC " EncodeMethod='HtmlEncode' />
<asp:ContentPlaceHolder id="PlaceHolderPageTitle" runat="server"/>
</title>
More information, please refer to the link:
http://www.broculos.net/2013/07/how-to-customize-title-tag-in.html#.U3rvDHmKCM8
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Titlebar for the screen to be dynamic!

Hi,
Can we have the GUI status for a screen dynamic.I have constant in my program (no of days) which need to be part of my GUI status (titlebar) for my screen.So that when i change the constant value in my program the titlebar for the screen is automatically updated!
Any input will be highly appreciated...
Thanks!

Hi
Insert & in your titlebar, and then when you set it:
SET TITLEBAR 'XXX' WITH TITLE.
The system'll replace & with the value in TITLE.
So:
If .......
TITLE = ....
else.
TITLE = ....
endif.
SET TITLEBAR 'XXX' WITH TITLE.
If you want to manage more variable part, you can insert &1 &2 ... &5 in titlebar (I believe 5 is max, but i don't remember), and so:
SET TITLEBAR 'XXX' WITH TITLE1 TITLE2.....

When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

I have the exact same problem, I think. I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE. So big I could only see one or two icons. I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar. I finally just had to wait for the battery to die, then recharge it, and it looked normal again. I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them. I checked my accessibility settings, and Zoom was already off. So what is causing this problem for so many people, and what can we do to prevent it? Please help.

HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

So it's not the Zoom feature? Open System Preferences Universal Access pane Seeing tab. Make sure Zoom is turned OFF.
If it's not that, then you may have the resolution set so that it is not optimal for the built-in display. Open System Preferences Displays pane Display tab. The optimal resolution is usually the one at the top of the list of choices.

Display unaccountably gets too big for the screen

This has happened maybe a dozen times, and I don't know what I did to make it happen. Suddenly, the desktop display gets too large for the screen, and I have to scroll around to find the dock or the menu bar. Whatever else I'm working on, e-mail, etc., gets outsized, too. Does anyone know how to correct this? So far, restarting has worked, but that's a pretty time-consuming way to do it.

Cindy,
Hold down the CNTL key and scroll down with the mouse or trackpad. That should change it back to size. This is called screen zoom.
Cheers
You can also deactivate it in System Preferences for the Mouse and/or trackpad.
Message was edited by: captfred

After update to 10.9.4, it is not possible to use my iphoto library for the screen saver

after the update to 10.9.4, it is not possible anymore to choose a folder in my iphoto library for the screen saver

Problem solved after the third! reboot!

Mac login acounts too wide for the screen

The older versions worked just fine, but Lion login account icons run left and right and are too wide for the screen on the macmini. So, I have to scroll to get to my account at the end of the list. Is there a way to change this?

It is possible that the screen is too wide or too high and that the scroll bars fall off.<br />
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also:
* http://kb.mozillazine.org/Resizing_oversize_window
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
See:
* http://kb.mozillazine.org/Corrupt_localstore.rdf

Xr2 v3-p remote where is the zoom button tv picture is to large for the screen

I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.

themamalama wrote:
I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.
For your Cisco/Scientific-Atlanta brannded DVR, it sounds like the user settings may need to be adjusted.
To access the user settings, turn OFF your set-top box; it will remain in standby mode.
Press (Guide) on your remote while the set-top box is in standby mode. OR press Channel Up + Channel Down simultaneously on the front panel of the set-top box.
Scroll to TV TYPE and choose the appropriate setting for the TV: 4:3 Letterbox, 4:3 PAN/SCAN or 16:9 widescreen
Scroll to HDMI/YPbPr OUTPUT and change it to either 480p std, 480i std, Pass Thru or 1080i
Scroll to 4:3 OVERRIDE and select 480p

TITLE for the Interactive report

Hi,
I like to show a Title for the Interactive Report in several different languages.
But it seems if I just pick Interactive report, there will be no Title shown.
What is proper way of doing this ?
So, what I did was, I created a HTNL region, just to show the Title, but it seems the translation and XLF file doesn't pick it up
Please help
--John

I have further to report.
It looks like a bug.
The REGION title text is missing in "TRANSLATE APPLICATION" in "SHARED COMPONENTS" under WINDOWS environment.
The REGION title text is in SUN environment, but does not shown as translated in the browser.
Thx
--John

Regarding Title for the Screen

Similar Messages

Maybe you are looking for