Regarding total number of rows in query analyzer

Dear all,
I have one query. when i execute the query using analyzer i get upto 65000 rows only in excel file. We have 2007 excel format and it has row-capacity more than that.
From report i should get around 80000 rows. Is there any setting to extend the no. of rows, so that i can get complete report?
i can give some restriction on query, but that is another option.
Plz guide me for the same.
Regards,
Omkar
Edited by: omkar patil on Jul 23, 2008 12:09 PM

Query JumpTargets are nothing but going one query to 1.another Query,
2. Any Transaction Code( screen) at cube level OR ODS level.
Clearly I am specifing that If u wnt to diplay Detailed data( ODS data) for respect Record at the cube level we will use this QueryJump Tagets .
It is also called as Report to Report Interface.
Example scenario:
On Cube level query Diplaying Different vendor balances but it is not diplaying the document details for the balances for that perticuler vendor .
so at this situation u have to create Interface between Cube query with Vendor details & ODS query with document Details of that perticuler vendor.
How to do This : steps to do this:
1.Goto Transaction code RSBBS.
2.There ur having two tabsrips 1.Query 2.Infocube
3.click on query tabstrip it will ask query name ---> enter the query name ( Base query Which u created on Cube vendor details)
4.click on create button it will give some some screen in that select REPORT TYPE as BW Bex Query radio button-->select Traget system Local-->at Report u have to enter ur Detailed report which u created on ODS.
5. Click on Transfer (f8)
6.Save it.
How to check query jump:
1. Execuite ur base Query ( Query which is created on ur cube )
2.click on any( vendor) column of that report -
>right click->select goto-> there u will see the query name which u created on ODS ->click on it
It will dispaly the detail report for that (vendor) column.

Similar Messages

Total number of rows fetched

hi
Is there any way to get total number of rows fetched along with
result set in a single query
jos

Hi,
You are referring to "Analytical Functions"
COUNT(*) OVER ()the above one your are counting the number of records, with respect to logical parition window -as if you specify with it the over clause. it won't provide the information as required, with respect to the your first post.
- Pavan Kumar N

How to set total number of rows of table control

Hi All,
I want to set the total number of rows of table control. I don't want to display the blank rows in table.
Regards,
Shrinivas

Need some fine tuning regarding the scrollbar height but it's a start
Unless this isn't what you asked for
Small number of rows
Large number of rows
Attachments:
PlayingWithTable.vi ‏17 KB

Display the total number of rows for the report in OBIEE 11g

Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacne

Check this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful

Count total number of rows present in the schema

Count total number of rows present in the schema including table, sequence, view
Desirable Output
table          Sequence     Views
1000          20          1000

You mean You need to count the No of Tables, View and Sequence Present in the Schema ??
Hi Some thing like this,
SELECT a.view_cnt AS "View Count", b.tab_cnt AS "Table Count",
       c.seq_cnt AS "Sequence Count"
FROM (SELECT COUNT (*) view_cnt
          FROM USER_VIEWS) a,
       (SELECT COUNT (*) tab_cnt
          FROM USER_TABLES) b,
       (SELECT COUNT (*) seq_cnt
          FROM USER_SEQUENCES) cWhich give you,
View Count      Table Count      Sequence Count
       153              878                   32Thanks,
Shankar
Edited by: Shankar Viji on Aug 28, 2012 3:03 AM

Find Total Number of Rows in Database

I am trying to find total number of rows in Database? Thanks in advance

I'd come back to a question of "why". What possible reason could you have to want to know the number of rows in every table in the database?
This seems like it is a request from someone non-technical where they're not sure exactly what they need to ask to get the information they want. I'm forseeing something along the lines of
User: How many rows are in the database
DBA: Ummm.... <<goes off and spends a lot of resources to count>>> ... 1 billion.
User: Wow, that's a lot... How big are those rows...
DBA: Hmmm... <<goes off and spends more time trying to find an average row size>>... 100 bytes
User: <<Plugs numbers into Excel>>... OK, our database is 93 GB, so we need to order 100 GB of disk for our new environment.
DBA: <<Months later, after 100 GB of disk has been budgeted, purchased, and delivered>> User, you didn't order enough disk for our disaster recovery environment.
User: You said our database was only 93 GB!!
DBA: 93 GB of data. Plus 100 GB of indexes, TEMP, UNDO, space for archived logs, ...
When "odd" requests come down, it's generally the case that the person asking the question doesn't know what question they really want to ask because they don't have the domain knowledge to know how to ask the question. Walking over and asking them what they're hoping to accomplish/ what they're using the data for generally leads to a case where
- The user gets exactly the information they need, not the information they think they want
- The DBA does a lot less work, since the right question is almost always easier to answer
- The user thinks of the DBA as a really helpful sort of guy and remembers how helpful you were in the past when you have to push back on other things later
- No one ends up playing the blame game when the user gets just what they asked for and not what they want.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Total number of rows

Is there anyway of getting the total number of rows in the database via JDBC on a MySQL database?

thanks guys for your help but since my returned result set is huge anything that has to load the whole result set in memory is absolutely out of the question.
For my situation what DrClap suggested works wonders. I use
SELECT COUNT(*) FROM SomeTable
and then
count = rs.getInt(1);
This way I get the total number of rows plus its really quick.
Thanks DrClap

Select a specific number of rows in query

How can a specific number of rows be selected in a query? For example, a query retrieves 30,000 records and I want to retrieve the output by groups of 5,000. I want the query to retrieve the first 5,000 records, then the next 5,000 records etc. I tried rownum but that does not work.
Thanks,
PANY

Not AGAIN. Please...........
Do you know how to Google? Search forum?
Why do you ask this boring FAQ AGAIN?
Sybrand Bakker
Senior Oracle DBA
Experts: Those who know how to search.

Fastest way to check total number of rows from View ?

Hello Everyone,
Good Morning !!!!
I am trying to know the exact number of rows from a view.
I have total 262 columns in a view name vw_sample. First column name is col_1 and I do not have permission to view that. but I do have permission to view all other 261 columns. I want to know fastest way to know exact number of rows in this view vw_sample.
How can i know that ?
I tried below things.
1) Tried using COUNT(*) & COUNT(1) but I don't have permission to first column col_1 so that didn't worked.
2) I do not have permission to view DMV "sys.dm_db_partition_stats"
3) I tried to execute below code.
select col_2, col_3,...col_262
into #TempTable
from vw_sample
and it gave me below error
Msg 1105, Level 17, State 2, Line 1
Could not allocate space for object '<temporary system object: 9830433781072176840>'
in database 'tempdb' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.
4) Accidentaly I run below code
select col_2, col_3,...col_262
from vw_sample
It gave me 11 million rows in 40 minutes. As we know this method is not good to test just number of rows from a view.
So what would be my option here ?
Thanks in advance.
Thanks
Fredyy

Fredy, did you try with other column names instead of col1?
SELECT COUNT(col2) FROM View
What difference does that make, than using your column 1.
Please mark as answer, if this has helped you solve the issue.
Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.
IMO, sqlsaga's answer is the way to go, but you may need to make a minor change. When you do COUNT(<some expression>), SQL counts the number of rows where <some expression> is not NULL. So if col2 can be NULL you need to make a change
so you know what you are counting can't be NULL. If there is some other column in the view that can't be NULL, just count it. Otherwise just use the ISNULL function to convert NULL's to a value. For example, do
Select COUNT(IsNull(col2, 0)) From vw_sample
Note the above assumes that col2 is a type that contains a number (int, numeric, float, etc). If col2 is of a different type, then just replace the 0 in the above with any valid value of the same type as col2 (so '' for varchar, '19000101' for datetime,
etc).
Tom

How do I increase the total number of rows?

This seems like a dumb question, but I can only seem to be able to add one new row at the bottom of my spreadsheet at a time using the '=' in a circle button that appears below the last row of the spreadsheet.
I want to add hundreds of rows, and I can only seem to add one at a time which seems ridiculous and a huge waste of time. There has to be a way to add a huge block of empty rows to the spreadsheet right? Can you really only add one new blank row at a time?

you can select rows, then use the key combination <option> + <down arrow> to add the same number of rows you selected for each key press.
If you select five rows then each time you type the key combination Numbers will add five rows.
If I want to add many rows I select all rows, then type the key combination, then I select all rows, and type the key combination again, repeat as needed

How to get total number of rows return by query

hi all
i am using forms 6i with oracle 10G in windows environment....
i have a tabular form now i want to know that how many rows return by the query...like when user click on enter query and then give any search criteria and then execute query..it displays the records but i want to count the records that how many rows are return.............
hope you understant what i mean
Thanks in advance
Regards

U can use
"Select count(*) from <table> where <condition>"
<condition> is the where clause being used during "Execute Query"
this will give u the no of records in query.
And second option is to take a summary column. whose function is set "COUNT" and
"Summarized item" should contain a column that will never be blank. After execute query this column will give u no of records in block.
Regards....

How to find number of rows after query

I have a simple query page. On this page I enter query criteria and hit the go button I get the query result. (say it finds one record)
On processFormRequest of the controler of this page after I execute (executing explicitly because I am using some bind variable too) the query I print getFetchedRowCount() and getRowCount() and I get 10 (as the total records according bind variable criteria are 10). Where I am expecting 1 as the result.
and I want to get the value of that row as well.
Can anyone please guide me how I can achieve this?
Thanks

Yes I am using queryBean for search region. I can see both, criteria that I am passing through search region and bind variable in the query.
If I pass the customer name it gives me that customer as a result.
but the counts i get doesn't seem to consider that search criteria from query region.
Interestingly when I execute the query again with the same customer name ...I get the correct count. i.e 1
Followoing is the query from "about this page-->business component reference details."
SELECT * FROM
select distinct super_customers.party_name
   customer_name,
   super_cust.cust_account_id customer_id,
   sup_cust_acct.Status,
   sup_cust_acct.customer_class_code,
   CINT_CRM.Get_Customer_Type(sup_cust_acct.customer_type),
   sup_cust_acct.FOB_Point,
   sup_cust_acct.sales_channel_code,
From
   hz_parties Customers,
   hz_parties Super_Customers,
   hz_parties cust_cont_rel,
   HZ_RELATIONSHIPS REL,
   HZ_Cust_Accounts rel_cust_acct,
   HZ_Cust_Accounts sup_cust_acct,
   HZ_CUST_ACCT_RELATE_ALL Super_Cust
where
   customers.party_id = rel.subject_id
and cust_cont_rel.party_id = rel.party_id
and rel_cust_acct.party_id = customers.party_id
and Super_Cust.related_cust_account_id = rel_cust_Acct.cust_account_id
and super_cust.cust_account_id = sup_cust_acct.cust_account_id
and Super_Customers.party_id = sup_cust_acct.party_id
and sup_cust_acct.account_number like 'SC%'
and cust_cont_rel.status = 'A'
and rel.status = 'A'
and rel_cust_acct.status = 'A'
and Super_Cust.status = 'A'
and sup_cust_acct.account_number like nvl(:customerNumber, sup_cust_acct.account_number)
and nvl(rel.object_id, -1) = nvl(nvl(:contactPartyId, rel.object_id), -1)
and upper(super_customers.party_name) like upper(nvl(:customerName, super_customers.party_name))
and sup_cust_acct.account_number like 'SC%') QRSLT
WHERE
(( UPPER(CUSTOMER_NAME) like UPPER(:5)
AND (CUSTOMER_NAME like :6
OR CUSTOMER_NAME like :7
OR CUSTOMER_NAME like :8
OR CUSTOMER_NAME like :9))

Getting a specified number of rows froma query

How can I get the minimum 3 row from a query after a order by in the select
Eg;
SELECT ROWNUM,ROWID, connection_id, GROUP_ID
FROM prov_pending_commands
ORDER BY group_id
4     AAAZWTAAYAAANMiAAA     680932     32702947
3      AAAZWTAAYAAANMgAAB     644610     32703643
2 AAAZWTAAYAAANLrAAB     51925942 32704602
1 AAAZWTAAYAAANLrAAA     61247803 32704613
I need to get only the group ids 32702947,32703643, 32704602 for some other processing.
I checked by getting rownum or row id, but after ordering it gives wrong data
Please need help

Hi,
Try this,
select * from (select name, row_number() over (order by name) as row_num from test) row_num
where row_num <= 3
If you are looking for something else explain us more with sample output.
Thanks!
M T

Count of total number of rows, distinct count of column

Hi ,
I am looking for a procedure that will insert following data into columns :
Table_name Column_name COUNT(*) , count(DISTINCT COL_NAME)
EX: Employee emp_name 5000 4500
Employee emp_location 5000 10
I want this for the whole schema.
I have a procedure which give me count(*) , but i am not able to write a procedure for count(DISTINCT COL_NAME)
If some one can help me, that would be the really helpful
Thanks

SOmething like this could also work ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE    10.2.0.3.0      Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.50
satyaki>
satyaki>
satyaki>SELECT table_name,
2         column_name,
3         DBMS_XMLGEN.getxmltype ('SELECT Count(*) c FROM ' || table_name).EXTRACT ('//text()').getnumberval() tot_rows,
4         DBMS_XMLGEN.getxmltype ('SELECT Count( distinct '||column_name||') d FROM ' || table_name).EXTRACT ('//text()').getnumberval() unique_rows
5 FROM all_tab_columns
6 WHERE owner = 'SCOTT'
7 AND   table_name in ('DEPT','SAL_GRADE','GRADE');
TABLE_NAME                     COLUMN_NAME                      TOT_ROWS UNIQUE_ROWS
DEPT                           DEPTNO                                  4           4
DEPT                           DNAME                                   4           4
DEPT                           LOC                                     4           3
GRADE                          SUBJECT                                 2           2
GRADE                          UPN                                     2           2
GRADE                          L_EVEL                                  2           2
GRADE                          GRADE                                   2           2
GRADE                          TID                                     2           2
GRADE                          ACADEMICYEAR                            2           1
SAL_GRADE                      MAX_SAL                                 6           6
SAL_GRADE                      MIN_SAL                                 6           6
TABLE_NAME                     COLUMN_NAME                      TOT_ROWS UNIQUE_ROWS
SAL_GRADE                      GRADE                                   6           6
12 rows selected.
Elapsed: 00:00:01.06
satyaki>
satyaki>
satyaki>You may have to work a little - if you want to use this for all the case.
Regards.
Satyaki De.
Added column name
Off course credit goes to Michael. ;)
Edited by: Satyaki_De on Jan 27, 2009 12:19 AM

Ho to count the total number of rows Sql Reporting Services Report Builder's Dataset after filteration based on parameter

Hi to all,
             I have parameter and data-set i.e consists of SharePoint List items,Data-set get's filters and I need to count the total rows of the data-set i.e I get after filtration.
Thanks, Quality Communication Provides Quality Work. Mohammad Siddiqali.

Hi siddiqali,
Thanks for the question and Destin Joy’s reply. Please try to add the filter in the dataset level rather than the data region
level. Detail steps as below.
1.
Double-click the dataset name in the Report Data window, click Filters in the left panel.
2.
Click Add button, choose Admission Date in the Expression drop-down list. Type in the Value textbox with the parameter name: @selectDate.
3.
Right-click the cell that your identified by the red circle, select Expression, type in it with:
=CountRows("DataSetName")
Thanks,
Sharp Wang
Please remember to mark the replies as answers if they help you and unmark them if they provide no help.

Regarding total number of rows in query analyzer

Similar Messages

Maybe you are looking for