Regarding Triggering Point in SAP FI_MM,SAP_SD

Can anybody explain what is theTriggering Point in SAP FI_MM,SAP_SD ?
Thanks

Hi,
follow the link below for details on integration
[http://www.sap-img.com/financial/integration-of-fico-with-other-modules.htm]

Similar Messages

Regarding reorder point planning.

Hi experts,
I have entered safety stock as 40 pcs., reorder point 50 and created requirement for
may 09 - 30 pcs.
jun-09 - 30 pcs.
After executing MRP run it is showing planned order for 50 pcs. only.
But the requirements are not covered I mean to say at last the available qty should be zero.
Please help me on this immediately.
Rgds,
Parul.

In Consumption based planning(re-order point planning), planned independent requirements or dependent requirement will not be considered in the net requirements calculation. Instead, it is triggered when stock levels fall below a predefined reorder point .So, all the planned independent or dependent requirements in a certain period of time should have been considered before setting the reorder point
Therefore, these planning procedures are used in areas for planning both B- and C-parts and operating supplies.(low value materials, but consumption is more)
In reorder point planning, SAP checks whether the available stocks are below the reorder point that has been set for the material. If they are, SAP will create procurement proposal.
We can determine the reorder point manually (u201CVB-Manual reorder point planningu201D MRP Type in standard SAP R/3) or, it can also be calculated automatically using the material forecast (u201CVM-Automatic reorder point planningu201D MRP Type in standard SAP R/3).
In standard SAP R/3 system, besides u201CVB u2013 Manual Reorder Pointu201D and u201CVM u2013 Automatic Reorder Pointu201D MRP Types, there are also other MRP Types that have reorder point as its basis to calculate requirement with additional procedure which count external requirement (sales order and manual reservation) as a requirement. The MRP Type are: u201CV1-Manual reorder point with external requirementsu201D and u201CV2-Automatic reorder point with external requirementsu201D.
If you want to include requirements in the reorder point calculation in addition to the customer requirements and manual reservations,
go to SPRO ->Materials management ->consumption based planning ->master data -> MRP Types
Select the mrp type v1 and
select the following fields:
o     Requirements for materials to be provided in subcontracting
o     Dependent order reservations on the basis of production orders
o     Dependent order reservations on the basis of maintenance orders or networks
o     Release orders
o     Purchase requisition releases
o     Forecast delivery schedules
regards,
sikkandar basha

What is the best way to follow the scenario for Out look integration with share point using SAP Gateway?

1)what is the best way to follow the scenario for Out look integration with share point using SAP Gateway?
2)workflow concepts for Purchase order?
3)Email triggering from out look for an approval process of PO? how these scenario can be best implemented with updated functions in Duet Enterprise.

Hi,
I do not have much idea on gateway integration with outlook but found out this document GWPAM Workflow Template which can be helpful for you to start with.
also you may want to post your question in SAP Microsoft Interoperability forum
Regards,
Chandra

Triggering point for EDIT

Hi Experts,
I have a requirement to update pricing date based on some user action ie whenever user clicks on EDIT button.
What could be the triggering point to write logic.
Important thing is here EDIT action of user is not from WEBUI (it will be from HYBRIS UI).
Could anybody help me in this.
Thanks
Anil

Hi Tom!
You can create a BPM to catch the exception of the send IDOC step, and then use a control step to throw the alert. Another idea: maybe you can trigger the alert or mail from the CCMS..maybe there is a condition to raise an alert based on negative acks.
Please read this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f6d2d790-0201-0010-9382-b50b499b3fbe
Regards,
Matias.
Message was edited by:
Matias Denker

Triggering Points

What and how to use triggering points. and whats the advantage of using it.

Hi,
Refer to SAP help link given below for a generic understanding of Trigger Points:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/bb/047bcbabc711d1890a0000e8323492/content.htm
In brief, trigger points are used to either trigger operations or create orders. For eg, in certain cases, your production order might contain 10 operations & you want to release only first 4 operations & only after the 4th operation is confirmed you want to release the subsequent operations, then you will need to use trigger points. One of the reasons for doing this is, you might not want to reserve capacity on the work center till the first 4 operations are confirmed thereby keeping the capacity available for other Orders.
You can also use it to trigger creation of production order, eg: you might want to trigger the creation of a rework order.
Use CO31 to create trigger points.
I would suggest to go thru the link & do a test in your sandbox.
Hope it clarifies your query.
Regards,
Vivek

Set value to attribute created in other enh. point by SAP

Hi all,
I'm modifying a standard component, I've created an enhancement point and a post-exit in some methods. Within this methods I want to read/modify the value of one attribute that is created in other enhancement point by SAP.
I've tried to read this value using the code wizard but when I try to use it the following message is displayed:
"This element cannot be selected in enhancement mode ZZZ..."
I've written the code by hand but when I try to activate it there is a syntax error, because don't find the type of this element...
I don't know if exits any way to do it.
Thanks in advance.
Regards,
Ricardo.

Hi JhonSnow,
Thanks for posting in MSDN forum.
This issue would be better post to
windwos desktop debugging forum, I will move this issue to there for better support. Thanks for your understanding.
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Source of the triggered mail in SAP (SCOT)

Dear ALL,
Would like to know any information on possibility to find the source of the triggered mails in SAP.
The requirement is to inform the concern team members about the failed mails with status 855 and to remove invalid mail id from the recipient list, with information on, from which transaction the mail has been triggered.
your valuable suggestions would be helpful.
Thank you
Chaitanya

Dear Mr. Deepak,
Thank you for the reply.
Information of the sender is available, but the requirement is to find the transaction/report name from which the user has triggered the mail.
suggestions for the same would be helpful.
Thank you
Regards,
Chaitanya

I need triggering point pa0105 instead of pa0709

Hi Experts,
In my requirement the idoc should be generated after the infotype 0709 in pa40 . i.e 0709 is triggering point , where as now the triggering point i need
0105 as part of 0709 , please give me some help .
Thanks
Venkat.

Hi venkat,
the triggering point is decided because of the 'change pointer' defined.
check the idoc configuration in your system for 0709; you'll figure out the way to set up this new triggering point.
Regards,
Ajinkya

Template doc regarding Gap analysis of SAP BI -MM

Hi Gurus,
Can any one send a template doc regarding Gap analysis of SAP BI -MM

HI,
Gap Analysis:
In simple terms: Gap means small cracks. In SAP world or in Information Technology world, gap analysis is the study of the differences between two different information systems or applications( ex; existing system or legacy system with Client and new is SAP), often for the purpose of determining how to get from one state to a new state. A gap is sometimes spoken of as "the space between where we are and where we want to be."
Gap Analysis is undertaken as a means of bridging that space. Actual Gap Analysis is time consuming and it plays vital role in Business Blueprintstage.
A through Gap Analysis will identify the gaps between how the business operates and its needs against what the package can can't do. For each gap there will be one of three outcomes which must be recorded and actioned,
1. GAP must be closed and customised software can be developed
2. GAP must be closed but software cannot be written therefore a workaround is required
3. GAP does not need to be closed.
A point worth mentioning here is that at time people confuse between user-exits and Gap Analysis. User exits are standard gate ways provided by SAP to exit the standard code and we can write our own code with the help of ABAP workbench, its not new functionality which we are trying to build in sap but its slight enhancement within the same code.
Gap analysis is start point of Realization and once business Blueprint is finished we have to find the realization of sap system for client requirment and there will be certain gaps when compared to system fit. Those gaps can be closed either by re-engineering of business process to fit with SAP or we have to use USER exits in case of small deviations or complete enhancements with the help of ABAP to fit with the SAP system.
The Gaps can differ from company to company. Most commonly, however, missing functionality is industry-specific.
GAP Analysis
Re: gap analysis
Re: gap analysis
Tarak

How to find Event Triggering place in SAP.

Hello,
By looking at a developed Workflow. How do we find out the triggering point code written in SAP transaction. Is there something like WHERE USED LIST to find out the locatoin of Event triggering point?
Please assist.
Thanks,
JM

The other possibility(I Think) is that if the workflow is started by using a raising a event then I think you cna find the respective program name in the SWEL txn, by selecting the respective event name and BOR .
1. Execute txn SWEL.
2. Specify the create date and time and then Execute (F8).
3. Select the BOR and event name and click display.
4. On the new ascreen at the bottom you can find the program name, copy the program name and then navigate to Se38 txn and open the mainprogram in display mode and try to search the program by using the keyword EVENT.
It will display the point and location from where the event is raised...

Creating second InfoView entry point for SAP users in XI 3.1

Hi All,
I have BOE XI 3.1 up and running with the Business Objects Integration kit SAP Solutions kit I would like to create a second infoview entry point for SAP users on the same physical box (single server) as regular InfoView.
I am trying to mock this up and have detailed the following steps below. I suspect I am missing a few steps (for example, where do I specify the entry port?). I am sure step 2 is wrong, as I the desktoplaunch no longer exists in Xi 3.1
1. Copy the InfoView.war file to a new directory ( Program Files/Business Objects/ Business Objects Enterprise 12.0/java/applications/sap). I imagine I would need to rename the war file (say SAPInfoview.war)?
2. Create a xml file with the following logic (the part in bold I consider to be wrong...):
<Context docBase="Program Files\Business Objects\Business Objects Enterprise 12.0\java\applications\sap\SAPInfoview.war" path="/
businessobjects/enterprise115/desktoplaunch"
crossContext="false" debug="0" reloadable="false"
trusted="false"/>
3. Save the xml file (what name? does it matter) in Program Files\Business Objects\Tomcat55\conf\Catalina\localhost
4. Restart Tomcat
5. Change the web.xml to make SAP security the default. But this should not be the regular infoview web.xml. I'm not sure where this would reside.
Thanks,
Steve
Edited by: Steve Bickerton on Jan 15, 2009 9:19 PM

Hi Ingo,
You've been working with Duncan and Sartaj on this. The client has two set of users: non HR which has no BW or R/3 authorization restrictions, and HR, which has authorization restrictions.
They have deployed SSO using AD for the non HR users. They also want to leverage InfoView rather than the SAP portal. For the HR users, we therefore need to capture the SAP id and password at login time to enforce security at the BW and R/3 levels. We could use the existing Infoview entry point (SSO will fail and they will be prompted for a SAP login). I do remember that we offered a second InfoView entry point for SAP users in XIR2. I thought this may be more elegant.
Thanks,
Steve

The relevance\purpose of shipping point in SAP SD

what is the relevance\purpose of shipping point in SAP SD?hat

Hi,
In addition to the above,
A delivery is always initiated from exactly one shipping point. Thus, all items of a delivery belong to one shipping point. Groups of deliveries also belong to exactly one shipping point.
The shipping point can be proposed automatically during order processing depending on the plant, loading group and shipping condition.
The shipping point is used as a selection criterion for lists of deliveries and the work list deliveries.
The shipping point is used as a selection criterion for processing deliveries like printing, picking or goods issue.
Prase

This question regarding sending mail from sap

hi to all,
this question regarding sending mail from sap
rt now iam able to send mails from 500 clint, what r the setting i need to do send mails from my another client 700,
iam using ecc 6.0 with sql database
regards,
krishna
Moderator message: FAQ, please search for available information before asking.
locked by: Thomas Zloch on Aug 16, 2010 2:11 PM

hi to all,
this question regarding sending mail from sap
rt now iam able to send mails from 500 clint, what r the setting i need to do send mails from my another client 700,
iam using ecc 6.0 with sql database
regards,
krishna
Moderator message: FAQ, please search for available information before asking.
locked by: Thomas Zloch on Aug 16, 2010 2:11 PM

External break point in sap r/3 system

i want to set external debugging to rfc in r/3
i tried to set it
its getting set
but when i call rfc from external system(webdynpro)
its not gng to that break point i.e its not linking to that break point
what could be the reason
and how we can set external breakpoint
are there any setting we need to do in r/3 so that break points will work
Regards,
Vani

Hi Vani,
First u have set ur Server to Debug mode...then only u can debug the code...
1. Select "Server0" from J2EE engine (To get this view navigate thru Window--> Show View --> J2EE Engine)
2. Make a right click on "Server0" and choose "Enabling Debugging of Process"
3. Now, Navigate to Run --> Debug --> Select your Project as "Webdynpro Application" and click "new" button
4. Now give some name and Click BROWSE to select ur project and then click APPLY and DEBUG
Or
if u use 2004s, then u can do the settings in Portal itself...which gives u more clear information... follow the link
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0cb32c5-36a7-2910-2c9b-ba4a5bbdbb56">WebDynpro Java Debug Configurator</a>
Hope it helps...
Regards / Guru

Regarding Extracting Data from SAP CRM

Hi,
1) What are steps to extract data fron SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
Can anybody please let me know the answers for these ..........
Thanks in Advance,
Sowji
[email protected]

Hi Sowjanya,
Pls ch this link:
regarding bw crm extraction
CRM extraction
CRM Extraction
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Steps:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Datasources used in CRM-BW extraction are:
0crm_sales_act_1,
0BBP_STSMA_TEXT
0CRMFOCST_TEXT
0CRM_ACCPLN_ATTR
0CRM_ACCPLN_TEXT
0CRM_BILL_BLCK_TEXT
0CRM_CANC_PARTY_TEX
0CRM_CANRSN_TEXT
0CRM_CATEGORY_ATTR
0CRM_CATEGORY_TEXT
0CRM_CLASS_TEXT
0CRM_DECOTP_TEXT
0CRM_DECO_TEXT
0CRM_DIRECT_TXT
0CRM_ECROPT_TEXT
0CRM_FINCLASS_TEXT
0CRM_ITM_OBJ_TYPE_T
0CRM_ITM_TYPE_TEXT
0CRM_JRGUID_TEXT
0CRM_OBJ_TYPE_TEXT
0CRM_OPGUID_TEXT
There many more!
Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
*pls search SDN For more info*
*pls assign points if info is useful*
Regards
CSM reddy

Regarding Triggering Point in SAP FI_MM,SAP_SD

Similar Messages

Maybe you are looking for