Regd K9RR3D2000003 table and associated SAP IMG
Hello Gurus,
I am looking at the table K9RR3D2000003 - Derivation rule:COPA Revenue type derivation from SO Type. Can someone please tell me the Transaction and SAP IMG path to access this table and to make entries.
Thanks and Regards,
SNK.
I Could trace this out. It is in Transaction KEDR.
Thanks,
SNK.
Similar Messages
-
Corrupted table and associated mappings
I believe I caused a problem by reimporting a table into the owb. All the mappings with the table became undeployable and any new mappings with table were undeployable and created hanging sessions when attempting to deploy. Export and Import also led to an error. Tried deleting table and importing again but have fear in my heart now.
Cannot import from exported file. This is the error:
MDL1407: Cannot import TABLE with business name <T_DETAILS> matching by object identifier because a TABLE <MER.MER.T_DETAILS> with the same physical name <T_DETAILS> but different object identifier already exists.
Do i need to start wacking packages in my target schema or the owb schema?
Thanks,Hi,
The object which you are going to import having different object identifier.
Try changing the parameters while Importing as follows.
Import option as "Add new metadata and replace existing objects"
Match By as "Physical Names"
If the problem still exists, remove the object which you are going to import from OWB and try.
If you feel problem, then take a backup snapshot for safer side.
Hope this helps.
Best Regards,
Gowtham Sen. -
Check table and value table -Example
Hi Experts
Please give me the step by step procedure to create the check table and value table, and how to work on it.
Thanks in advance.
Regards
RajaramHi
Check Table is for Field level Validation whereas Value table is for Domain Level Validations.
Value Table proposes table for check table.
I think you are clear with this.
more elaborate.
Check Table
The Check Table is the table used by system to check if a data exist or not exist.
While creating a table if you want to be sure that a field can have some values
and these are in a certain table, you can give IT this table as CHECK TABLE.
Value Table
This is maintained at Domain Level.
When ever you create a domain , you can entered allowed values. For example you go to Domain SHKZG - Debit/credit indicator.
Here only allowed values is H or S.
When ever you use this Domain, the system will forces you to enter only these values.
This is a sort of master check . .
To be maintained as a customization object.
This mean that if you want to enter values to this table you have to create a development request & transport the same.
Differences:
1)check table will carry out the check for input values for the table field being entered in any application
and value table will provide values on F4 help for that table field.
2)The check table defines the foreign keys and is part of the table definition.
The value table is part of the domain definition.
check table is validation at field level.
value table is at domain level.
Value table is defined at the domain level and is used to provide F4 help for all the fields which refer to that domain.
Check table is defined against a field in SE11 if you want the values in that field to be checked against a list of valid values. For e.g. if you are using the field matnr in a table you could define MARA as the check table.
Also while defining a check table SAP proposes the value table as check table by default. Referring to the previous example if you tried to define a check table for the matnr field SAP would propose MARA as the check table.
1. what is the purpose / use ?
-- so that the user can select values
from some master table , for that field !!!!
2. This is done by
CHECK TABLE (foreign key concept)
(and not value table)
3. When we create a check table for a field,
then
some DEFAULT table is PROPOSED
4. that DEFAULT table is nothing
but PICKED up from the domain of that field,
and shown from the value of VALUE TABLE.
CHECK TABLE -it is a parent table.
for example..
i have two tables ZTAB1 and ZTAB2.
I have one common field in both the tables,i can make any ztable to be the check table .If i make Ztab1 to be the check table then when i have to make an entry in ztab2 i will check whether ztab1 is having that value or not..
its also field level checking..
Valuetable-It is nothing but default check table.
one parent can have n number of child tables.For example
For ztable we have zchild1 and zchild2 tables r there.
Its domain level checking..When zchild2 uses the same domain as used by zchild1 then the system automatically generates a popup saying a check table already exists would u want to maintain it.
go to domain and then press the value tab u can see the valuetable at the end...
Please refer the links below,
d/r b/n check and value table?
wjhat is the exct difference between check table and value table
what is the check table and value table
check table and value table
Re: wjhat is the exct difference between check table and value table
http://www.sap-img.com/abap/difference-between-a-check-table-and-a-value-table.htm -
About the Names of std Tables and their list of contents
Hi every body ,
can u pls give me Source of finding the list of standard tables and their contents
such that i can refer to those tables to determine what should be the Mandatory data elements .
i need just 2 determine what is required and what not ?
Awaiting for a brighter and good response .....
reply to [email protected]Hi,
Search for SAP Tables in www.sap-img.com. You will find a Zip file, this has most of the tables used in most of the modules. Check those tables and find which are all the primary fields.
Regards
Subramanian -
Unable to print main window and associated secondary windows in next page
Hi All,
iam print line items values in first page by using main window (table) and associated terms &condition in second window(template).
But i want terms & condition to printed in other page.I tried to create COMMAND to manually trigger second page but it doest work.
Kindly suggest.
Attached is snap shot of current output(Shaded region are space of dat window).Also attached is overlapping of main and secondary windows.
Since i need to increase the above template sizes i shifted main window and other 2 secondary window downwards so i wanted them to print in next page.Hi abhijeet,
Add Programming lines before Command before loop statement,
In that Count the itab using describe table.
Add condition if count EQ Sy-tabix.
pass to command line.
Try this,
Regards,
Venkat. -
Comparing columns in table and triggers
hi masters,
i have oracle 10g in Linux and us PL/SQL developer to access database, ia m not a developer, but am assigned task to compare columns in table and associated trigger.
let me explain, we have 800 tables, and each table essentially have a trigger created on it. the condition is that each trigger on table should include each column in table, that is columns in table and trigger should be same.
now i don't understand how to compare them, rather can you suggest any query for the same?? and comparing 800 tables manually will be tedious job...
i am unable to compare trigger columns with that of tables..
how can we achieve this???
any suggestions??
thanks and regards
VDHi,
A good starting point could be consult user_triggers view. Example:
Connected to Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
Connected as hr
SQL> desc user_triggers
Name Type Nullable Default Comments
TRIGGER_NAME VARCHAR2(30) Y Name of the trigger
TRIGGER_TYPE VARCHAR2(16) Y Type of the trigger (when it fires) - BEFORE/AFTER and STATEMENT/ROW
TRIGGERING_EVENT VARCHAR2(227) Y Statement that will fire the trigger - INSERT, UPDATE and/or DELETE
TABLE_OWNER VARCHAR2(30) Y Owner of the table that this trigger is associated with
BASE_OBJECT_TYPE VARCHAR2(16) Y
TABLE_NAME VARCHAR2(30) Y Name of the table that this trigger is associated with
COLUMN_NAME VARCHAR2(4000) Y The name of the column on which the trigger is defined over
REFERENCING_NAMES VARCHAR2(128) Y Names used for referencing to OLD, NEW and PARENT values within the trigger
WHEN_CLAUSE VARCHAR2(4000) Y WHEN clause must evaluate to true in order for triggering body to execute
STATUS VARCHAR2(8) Y If DISABLED then trigger will not fire
DESCRIPTION VARCHAR2(4000) Y Trigger description, useful for re-creating trigger creation statement
ACTION_TYPE VARCHAR2(11) Y
TRIGGER_BODY LONG Y Action taken by this trigger when it fires
SQL> select * from user_triggers;
TRIGGER_NAME TRIGGER_TYPE TRIGGERING_EVENT TABLE_OWNER BASE_OBJECT_TYPE TABLE_NAME COLUMN_NAME REFERENCING_NAMES WHEN_CLAUSE STATUS DESCRIPTION ACTION_TYPE TRIGGER_BODY
TRGTEST BEFORE STATEMENT INSERT HR TABLE DEPARTMENTS REFERENCING NEW AS NEW OLD AS OLD ENABLED trgTest PL/SQL DECLARE
before insert on departments -- local variables here
BEGIN
nul;
END trgTest;
UPDATE_JOB_HISTORY AFTER EACH ROW UPDATE HR TABLE EMPLOYEES REFERENCING NEW AS NEW OLD AS OLD ENABLED update_job_history PL/SQL BEGIN
AFTER UPDATE OF job_id, department_id ON employees add_job_history(:old.employee_id, :old.hire_date, sysdate,
FOR EACH ROW
SECURE_EMPLOYEES BEFORE STATEMENT INSERT OR UPDATE OR DELETE HR TABLE EMPLOYEES REFERENCING NEW AS NEW OLD AS OLD ENABLED secure_employees PL/SQL BEGIN
BEFORE INSERT OR UPDATE OR DELETE ON employees secure_dml;
END secure_employees;
RK_ALT_BEF_TRG AFTER EVENT ALTER HR SCHEMA REFERENCING NEW AS NEW OLD AS OLD ENABLED rk_alt_bef_trg PL/SQL BEGIN
AFTER ALTER ON HR.SCHEMA dbms_output.put_line('AFTER Schema trigger fired');
dbms_output.
SQL> Regards, -
DB2 Table locks after SAP Gui crashes
Hi,
I have a really annoying problem. Since my SAP Gui crashes sometimes, when I have nearly the limit of sessions open, I get serious problems with table locks in DB2.
Background:
When I run a program, which is updating/deleting/inserting data in SAP tables and the SAP Gui crashes, the table entries, which have been processed at that time get locked. So when SAP is then doing the roll back, the locks still exist!
The SAP basis guys have restarted the system for me, when I got this problem before, but it's really annoying, when this happens again...
I mean, of course the SAP gui shouldn't crash, but anyway the locks should be deleted by SAP during roll back, right?
Does anybody know this problem and does anybody know how to solve it without restarting the machine?
Many thanks!Hi Markus,
true, the SAP Gui is also an issue I have to solve... But anyway the table lock should not occur.
If you think about some other situations, where the process can be interrupted:
- Calling a BAPI synchronous via RFC, which is updating/inserting/deleting table records
- Windows bluescreen
- etc....
Whatever, it is really annoying to be in the need of restarting the system, when a process is going to be interrupted...
Any ideas to this anyone?
Thank you! -
Shipping point field and associated table...
Hi,
Can someone tell me the field and table asscoiated with shipping point ?
Also which transaction code we use for printing smartform for Bill of Lading ?
Thanks.
Regards,
Tushar.Hi Tushar,
some of the related tables which i found for Shipping point are <b>VTTK & VTTP</b> tables
For the required tables and fields download this document from
http://www.sap-img.com/sap-download/sap-tables.zip
and look at the SD tables tables to know the shipping details..
Reward if it helps
Regards,
Santosh -
Insert /delete data from SAP Z table to Oracle table and opposite
Hi,
Can u help me write this FM from the SAP side?
So, I have two tables ZTABLE in SAP and Oracle table ORAC.
Let's put three columns in each of them, for example
TEL1
TEL2
ADRESS
NAME
where TEL field is primary from ZTABLE to ORAC...
(in FM there shoud be abap code for writing data in ZTABLE after we press some pushbutton made in sap screen painter..)
for example, when we write new record in ZTABLE
00
112233
Street 4
Name1
this data shoud be inserted in Oracle table ORAC.
when we write new record in Oracle table for example
01
445566
New Street
Name2
this data shoud be inserted in ZTABLE.
Field TEL1 can be only of two values 01 or 02, other combination is not valid...
I must have all data from Oracle table ORAC in ZTABLE and opposite.
It should be the same scenario for DELETE...
And this communication should be online between sap and table in oracle database...
Can u help me from sap side? and give idea how to configure on oracle side??
Thanks a lot,
NihadI dont know if we can directly connect to a oracle database ( wait for the answers from others on this )
but in XI we have the JDBC adaptor to insert and retrieve data.
so for the outbound from SAP the flow can be something like this (with XI in landscape):
1) You have a screen to maintain a new entry / delete an entry
2) On save , this record gets saved or deleted from the Ztable in SAP
3)) In the same screen you can call a proxy class-method (generated using SPROXY transaction ) to send the record to XI.
4) XI to format it and insert into the oracle table
Mathews -
How to protect SAP Application Tables and Reports in R/3
Hi Gurus,
Any one please explain me detail how to protect tables in R/3 with different senarios.
How to protect reports in SAP R/3 without assigning SA38 transaction access
How to protect Program in SAP R/3 in R/3Hello Happyman,
<b>What do you mean by Protect Table, Program and Report?</b>
Let me ask you one base Question, On which area are you working? Are you from functional side or Technical side (Developement or Basis guy)?
This is very clear cut answer that with the restricted autorization you can protect table and programs. Do not provide the change autorization.
CATCH your BASIS guy and he will do rest of the things. Just explain him what are you want to protect.
Hope this helps.
Regards
Arif Mansuri -
To upload SH customers in Temporary table and create customers master in SAP
Hope you are doing great ---Need you help/advice on the below thought
we receive an excel file listing accounts that need to be set up as customer recipients I.E customer master in SAP system . we receive a file in the from of spread sheet and then we manually create the same in SAP system. Since this size of this indirect customers is growing day by day business has decided to automate this process
proposed solution-
1.Modify the file received from external system to format required for loading in SAP and add all the mandatory fields in the customer master
2.Load the file into a temporary tablein SAP ( transaction code)
3.verify the data and approve for actual customer creation in SAP ( create inbound idols to create customer master data in SAP)
4.check how many customers created in SAP with standard T.code
From the step 3 above the idea is to create an an inbound idoc . Debmas and etc to create the customers in SAP system .
Not sure how to go about this to achieve this functionality. I need to understand what all does it takes to see this functionality work
will be great help if any of you can forward me the technical specs or details if you have worked on the same
Appreciate your help----
MohitHi Mohit,
I think you are mixing solutions. I think you don't need to create an inbound idoc, because this requirement could be achieve using a LSMW. Create a batch recording, use the Excel structure, even you could add the missing (necessary) fields to create the customer. By standard, the LSMW will create a temporal table and will check duplicate customers, using for example the tax number (assuming this number can't be repeated).
Another solution if you are planning to upload data directly from the source system, on this case you could use the inbound idoc.
Regards. -
How are attribute and text master data tables linked in SAP R/3?
Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
ThomasHi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max -
Flow of tables information between sap and java
How should i pass the table information from sap to java.
and how to process the data of a table in the java program. i had seen the examples of JCO. BUT I IS VERY CONFUSING (BCOZ I DON'T KNOW JAVA).
PLZ IF U DON'T MIND SEND ME CODE SNIPPET TO
1.GET THE TABLE INTO THE JAVA PROGRAM
2.PROCESSING THE TABLE INFORMATION IN JAVA PROGRAM
3.MODIFYING THE TABLE INFORMATION IN JAVA PROGRAM
4.SENDING BACK THE TABLE TO SAP FROM JAVA PROGRAMhi,Kondani
as JCO offers both Client side and server Side programming.
you can use JCO to connect SAP ABAP.outbound and inbound.
1) JCO example 5 is about Server side programming java code. And you can see the data mapping is this example.And you must use sm59 to define the connections in SAP before you start.
2) example 1 is about client side programming.
try example 1 first. you can get a table from SAP using BAPI.
Lots of JCO weblog you can see here
https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&query=jco&selected=9&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv%3Fprttheme%3DCSIN%26QueryString=jco%26SearchPluginName=sdn_weblog%26SelectedCustomProps=resourcetype(value=sdn_weblog)
Regards -
Flow of tables informaion between sap and java
How should i pass the table information from sap to java.
and how to process the data of a table in the java program. i had seen the examples of JCO. BUT I IS VERY CONFUSING (BCOZ I DON'T KNOW JAVA).
PLZ IF U DON'T MIND SEND ME CODE SNIPPET TO
1.GET THE TABLE INTO THE JAVA PROGRAM
2.PROCESSING THE TABLE INFORMATION IN JAVA PROGRAM
3.MODIFYING THE TABLE INFORMATION IN JAVA PROGRAM
4.SENDING BACK THE TABLE TO SAP FROM JAVA PROGRAMhi,Kondani
as JCO offers both Client side and server Side programming.
you can use JCO to connect SAP ABAP.outbound and inbound.
1) JCO example 5 is about Server side programming java code. And you can see the data mapping is this example.And you must use sm59 to define the connections in SAP before you start.
2) example 1 is about client side programming.
try example 1 first. you can get a table from SAP using BAPI.
Lots of JCO weblog you can see here
https://www.sdn.sap.com/sdn/search.sdn?contenttype=url&query=jco&selected=9&content=/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fSDN!2fiViews!2fWCM!2fcom.sap.sdn..wcm.search.search_adv%3Fprttheme%3DCSIN%26QueryString=jco%26SearchPluginName=sdn_weblog%26SelectedCustomProps=resourcetype(value=sdn_weblog)
Regards -
How can i view and manipulate the Tables created in SAP DB (Netweaver)
Hai ,
i created one table in SAP DB integrated in Netweaver for J2EE Application.
How can i view the table in SAP DB.
Can i see the data inserted in that table in table view manner ?.
can i edit the data in the SAP DB table?.Hello Kishor,
You need to download the SQL Studio. With this tool login to the SAPDB server and you will be able to view the content of your table and manipulate your table as well
http://dev.mysql.com/doc/maxdb/tools.html
Regards
Abdul
Maybe you are looking for
-
I seem to have two apple id's. How do I get rid of one?
I am trying to access the Cloud to find a lost document, but I seem to have two apple id's, one is verified. I can't access cloud. How can I do that? Is there any other way to find my document? It means another week of work if not.
-
Azure AD user name not using configured custom domain name
I have configured a few users for Lync Online that I setup before I had custom domain name work with Azure AD. Now I have the custom domain setup and verified and configured as the primary domain. The users that were configured for Lync Online are
-
SLD server connection is inactive SCDT_LIS_IF011
After install and test SLD into XI 3.0, I am trying to customizr a Solution Manager 3.1 to connecto with SLD using SYSM_SETUP. I configure RZ70, SLDAPICUST, and SMSY_SETUP->Edit->expert setting as requested in SAP documentation. When I try from SMSY_
-
Premiere Elements 4.0 burn issue
Premiere Elements 4.0 with Windows XP (both pre-loaded on a Dell computer purchased new in 2007). I am able to create *.prel files with no problem and I had been able to burn projects up to 5-hr length to DVD with no problem until recently. Starti
-
How to set debug mode in jdeveloper for SOA Suite
Hello, Is possible to use jdeveloper, soa suite and debug mode? I can debug my web application with oc4j embendded server. But when i want to deploy on oracle application server and debug, doesnt work. How can i fix that? I saw that tutorials for jde