Regd MSS FPM Configuration...

Hi ,
we have implemented ESS & MSS business packages . I need to show the Appraisals and Qualification iview which is displayed under MSS >> Team >> Employee Information >> Personnel development page in MSS >> Team >> Employee Information >> General Information page . Is it possible to use the Appraisals and Qualification applications in General Information page?. Can we overwrite the sap.xss.BaseConfigurationID for these applications?.
Thanks in advance,
Vasu

Hi,
1) create your custom page/iviews based on MSS Pers Info
2) create your custom FPM app based on current FPM app for MSS Pers Info (copy & paste as a delta link)
3) change your new custom FPM app to include the Appraisal & Qualif
4) include in your new custom page for MSS Pers Info the Appraisal & Qualif iview
a few additional steps can be required, check for your case (current views and perspective)
The Wiki proposed is excellent, maybe you can read it starting from point 3. Also the following Wiki can be more useful for your requirement:
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=118423928
KR

Similar Messages

Start button in FPM configuration

Hi all,
There is a start button in FPM for initial screen.
In my webdynpro component, i have created 2 applications MAINTAIN and APPROVE.
Few days back i was able to hide start button for MAINTAIN application,
but because of the requirement change I had to hide for application APPROVE also.
I tried to hide in the same way as I have done for MAINTAIN application but button is not getting hidden.
Is there anything that I am missing like refresh of something, so that FPM configuration change is reflected
Thanks in advance.
Veda

Hi,
Problem is resolved.
There is a dropdown in FPM config, there I have selected webdynpro built in and then made button container of initial screen invisible.
But did not work for approve application as the FPM config changes are not getting saved.
I had to create a new application.
The changes would get saved if the support pack SAPKA70207(SAP_ABA) and SAPKB70207(SAP_BASIS) is implemented
Thanks
Veda

FPM configuration

Hi,
I am new to WDA and trying to work on FPM. Can anyone suggest me a good online course/material on FPM confuguration which i cn use a reference for FPM configuration.
Regards

Hi,
There is no online course material . There is fairly a good Developers guide and plenty of demo applications available.
see the scn forum for FPM [Floorplan Manager (FPM) Web Dynpro ABAP [original link is broken]|Floorplan Manager (FPM) Web Dynpro ABAP [original link is broken]]
Developers guide [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f3cfd2-46d0-2b10-b3ab-eabf3452cc50]
See the demo applications in the package apb_fpm_demo

FPM Configuration ID Determined by User Role

Hey All,
Sorry for the naivete of this question, should be a quick one. I have about 10 hours experience in Webdynpro and FPM. I'm working on just creating a copy of the LO_OIF_MAIN_APP and doing a deep copy of the configuration IDs. Everything works great, easier than when I tried this about five years ago. Now I have a config ID of my own (ZLO_OIF_SDOC_APP_CP) that has my own changes in it. However, when I launch NWBC I get the canned version and not mine. Of course, I'm missing a tie here but I can't seem to find it. What ties this to my user-id? I've deeply searched the likely tie, that being the role of SAP_SR_INT_SALES_REP_5...no luck. My end goal is to create three distinct configurations of the Sales Order Interface for different Sales Order users. One for Returns, one for Credits and one for Orders. How do I tie them to the user-id? What simple component am I missing?
Thanks for your help!
Greg

Hi Greg,
Please replace the WD object LO_OIF_MAIN_APP with your custom application in role SAP_SR_INT_SALES_REP_5 as below
Hope this helps you.
Regards,
Rama

Steps for ESS MSS installation,Configuration

Hi all,
I am having an experience of six months in sap ep(enterprise portal)
and web dynpro for java.
In the next month iam required to install ess and mss buisness package completly from start.
I have an basic knowledge of ess mss which i got by reading material from sdn library.
Can any one help me with the steps required for the installation ,configuration and customization of ess mss package.Also
I need an information about installation ,configuration and customization of various webdynpro application in ess mss package
Please help me with the steps,it is very urgent.
Full points will be rewarded for answers.

(BIBLE) - Employee Self-Service (ESS) Applications
http://help.sap.com/saphelp_erp2005vp/helpdata/en/6a/5bc8a009d54fcaa8e06c826a57253b/frameset.htm
What is ESS
Employee Self-Service or ESS is a web-based solution designed to automate many of the repetitive tasks of the HR function
by allowing employees direct access to HR information and services. The basic idea of ESS is that employees are empowered to be responsible for their own personal information.
Benefits:-
One of the major reason for organizations implementing ESS is that it allows HR professionals to spend less time in administrative tasks like paper filing,
attendance monitoring etc and more time dealing with more complex and strategic HR issues.
The Gartner Group had estimated that 40 percent of traditional HR activities were handled by ESS in the year 2000 and this can only increase over time.
You can learn about ESS and its features and also Business Package details from:-
ESS Document:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAESS/ESSIAC.pdf
What is ESS(Must See):
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4598a190-0201-0010-a59f-820e3b31f854
ESS Blog:
Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
http://help.sap.com/saphelp_erp2005/helpdata/en/f6/263359f8c14ef98384ae7a2becd156/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erphcm/employeeSelfService&
http://help.sap.com/saphelp_erp2004/helpdata/en/38/e8584c2a664547b60442646bee23b6/frameset.htm
Manager Self-Service
http://help.sap.com/saphelp_erp2004/helpdata/en/0a/8b3b40b1607a56e10000000a1550b0/frameset.htm
Employee Self-Service
http://help.sap.com/saphelp_erp2004/helpdata/en/5b/76a6d7fd3a4e91bfb422405bf3e04d/frameset.htm
to customize in r3
Cheer!!
SJ.

WebDynpro FPM configuration exception

Hi Experts,
I'm facing a scenario, I greatly appreciate if some one can answer. Thank you.
We are implementing NW04s SP9. ESS webDynpro version. backend ECC6.0
We are not using NWDI and we are implementing out of the box, no customization to standard delivered ESS WD apps.
In Dev portal every thing works fine. In QA portal I have transported using packages. but I did deployed ESS BP on QA system.
In QA environment every thing works fine if I assign super admin rights to the employee userID, if I remove the super admin role I' getting an dump error saying FPMCpnfiguration Exception: ReadObject "com.sap.pct.erp.srvconfig.DataRecord failed"
Can somebody experienced this issue. I have tried all ways from security standpoint like assigning content admin role only with ESS role same error as above, when I assign super admin role with ESS role, it works just fine.
Can some one suggest some options.
Greatly appreciated.

Hi Sunil,
You have to create enhancement implementation for your application configuration. Then you have to follow the below procedure for enhanceing the feeder class.
1. Create explicit enhancement for your feeder class by choosing spiral button in the class object toolbar, then it will provide pre,post and override method for your methods.
2. As per your requirement you need to add some action in your table control toolbar, for that you need to implement post exit for the GET_DEFINITION method.
3. Enhance your FPM application for adding the table control button and assign the created action in your feeder class and process the events in the post exit implementation of your PROCESS_EVENT method.
THanks & Regards
Praveen Gupta

ESS/MSS sso configure between java and abap instance

Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best Regards

Hi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

MSS reports configuration

Hi all,
I am following the MSS configuration document to set up the reports. One of the step is described as below in the document:
You must also configure certain parameters in the Portal Content Directory (PCD). The parameters relevant for reporting include:
● scenario
Define the scenario that creates a list of available reports. In the standard delivery, the standard scenario is RPT0. The value of the scenario parameter is the MDT scenario. If you want to use the standard scenario, set the parameter scenario=RPT0.
● viewgroup
Parameter viewgroup defines the Object and Data Provider (OADP) view group. The view group contains at least one view ID. View IDs determine the list of Organizational Management objects such as employees and organizational units.
My problem is I can not find the parameter either in individual iView or anywhere in portal, can anyone tell me where I can find the iView parameters listed above and change the value to my own customized scenario?

Currently we are bulding a MSS scneario which contains the iView sap.com/mssrpt/Reporting for HCM (MDT) reporting and multiple HCM ERP 6.0 backends where the reports should be executed. We have provided the iView in the application parameter with the new JCO connections parameters (like sap-wd-arfc-useSys=SAP_R3_HumanResources_MetaData:001 etc.) This part works fine. We have the right MDT scenario on the assigned ERP backend and the org. structure and the people on the assigned ERP backend system. But the selected report will be always executed on the wrong system - means on the system which is behind the system standard system alias SAP_R3_Human Resources. Is there some customizing table where the ALIAS could be stored - for the LPA-Reporting iView via the Launchpad there is the table FPB_LP6_R_MDT_C but this table is obviously not processed with the iView mssrpt/Reporting.
Kind Regards,
Harald

Reuse FPM configuration in another webdynpro component

Hello,
I would like to define the navigations and buttons in one component configuration . And then use this in another webdynpro component. As the buttons/navigation is applicable to multiple requirements. So I would like to reuse it.
I tried to do this using the developer's guide (7.0 , EhP2). But I am getting a dump
'The current application triggered a termination with a short dump ' .
Not sure if I am doing some thing wrong. Any ideas in this regard would be helpful.
method Web DynproDOINIT .
data: lo_usage type ref to if_Web Dynpro_component_usage,
ls_conf_key type Web Dynproy_config_key.
lo_usage = Web Dynpro_this->Web Dynpro_cpuse_fpm_usage( ).
if lo_usage->has_active_component( ) = abap_true.
lo_usage->delete_component( ).
endif.
ls_conf_key-config_id = u201CID configuration of FPM componentu201D.
* recreate component using new configuration ID
try.
(C) SAP AG Floorplan Manager ABAP - Developeru2019s Guide 185
Preliminary Version
call method lo_usage->create_component
EXPORTING
component_name = 'FPM_OIF_COMPONENT'
configuration_id = ls_conf_key.
catch cx_Web Dynpro_runtime_api .
endtry.
Thanks alot
Saujanya

Saujanya wrote:
Hello,
>
>
> I would like to define the navigations and buttons in one component configuration . And then use this in another webdynpro component. As the buttons/navigation is applicable to multiple requirements. So I would like to reuse it.
>
> I tried to do this using the developer's guide (7.0 , EhP2). But I am getting a dump
> 'The current application triggered a termination with a short dump ' .
>
> Not sure if I am doing some thing wrong. Any ideas in this regard would be helpful.
>
>
> '
>
method Web DynproDOINIT .
> data: lo_usage type ref to if_Web Dynpro_component_usage,
> ls_conf_key type Web Dynproy_config_key.
> lo_usage = Web Dynpro_this->Web Dynpro_cpuse_fpm_usage( ).
> if lo_usage->has_active_component( ) = abap_true.
> lo_usage->delete_component( ).
> endif.
> ls_conf_key-config_id = u201CID configuration of FPM componentu201D.
> * recreate component using new configuration ID
> try.
> (C) SAP AG Floorplan Manager ABAP - Developeru2019s Guide 185
> Preliminary Version
> call method lo_usage->create_component
> EXPORTING
> component_name = 'FPM_OIF_COMPONENT'
> configuration_id = ls_conf_key.
> catch cx_Web Dynpro_runtime_api .
> endtry.
>
> Thanks alot
> Saujanya
if your actual coding is like as it is above then it will give dump. For example
ls_conf_key-config_id = u201CID configuration of FPM componentu201D.
You need to replace the u201CID configuration of FPM componentu201D with the actual component configuration id.

RE:FPM configuration

Dear Experts,
In FPM component configuration,I have added a new button in the tool bar.but i dont know how to write an action for that corresponding button.Could you please help me out on this ?
Thanks & Regards,
R.Dhineshraj.

Hi,
In FPM whenver you add a button in the tool bar you will have a event ID associated with it.
In the web dynpro component where you implement IF+FPM_BUILDING_BLOCK interface, int hat component controoler you will have PROCESS_EVENT method.
based on the event ID you can write you code in this method.
Regards,
Madhu

MSS Launchpad configuration

Hello All,
Kinldy let me know what is the minimum configuration for the Manager desktop & MSS launch pad. For the Report workset I'm running into errors. The error is MSS: REP NOT_FOUND. Could any one let me know the IMG config and what else needs to be changed to the Reports Web Dynpro.
Thanks in Advance,
Praveen

Hello,
Did you solve your problem ?
If yes, do you remember how you solve it ?
I have the same problem.
Thank you for your feedback.
Philippe

Regd.UDDI server configuration in PI 7.1 and services registry

Hi ,
i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
I am using PI 7.1 and trying to taste the services registry flavour of it.
i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
i get a message that such a role doesnt exist at all.
Qn1:Do i need installed any software componet like UDDI etc, or do in need to have uddi server
configured for this , if yes how to do that..
I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
Qn2:How to configure UDDI server n PI 7.1
, any step by step guide which applies to PI 7.1 will help.
Qn3:What is the relation between tcode soamanager, services registry and UDDI
Qn4: I am not able to search my services in soamanager->business administration->WS administration
I have activated the services (Webservice Runtime)as mentioned in the Blog
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

Thanks Raj,
This property specifies a URL for the host name of the *physical machine where the Discovery
API of the UDDI server is located.* Its value is set automatically by default.
I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
what may be the reason for not able to assign the above roles as per the sap note given above?
Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
accepted,i used my ID for configuration XI super user!
After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
it slaps me with this error
Com.sap.aii.ib.core.uddi.RegistryCleintException:
A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
But if i open Services registry i can see that service got published.when i test in WS navigatore it
gives 503 service unavailable error.
How to delete unused published services
. Initialy i took the wsdl URL generated from
disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
How to delete them?I can see any direct option
Regards,
Abhi

Is ESS/MSS configured in ECC 6.0 ??

Hi all,
     Please let me know whether ESS/MSS is configured in the ECC 6.0 by default and if it is how to check it and start working on it.........
Thanks & Regards
Jerry

hi if you have ECC 6.0 it does not mean that you have ESS MSS already configured.
all you have to do is to install ESS MSS to your portal server (EP WAS).
if you are trying to check if some one has already installed it or configured it then you will have to logon to portal and check in PCD -> content provided by SAP
here you will find Employee self service Folder.
if not then you have to deploy the ESS MSS BP.
The link have been changed or revised check this fresh download link for BP
there are mainly 3 BP which you need to install. Make sure you install SAP PCUI_GP 600 first then ESS & MSS.
goto: https://websmp203.sap-ag.de/support
Click on SAP Support Packages - Entry by Application Group
Follow the link goto -> Support Packages and Patches -> SAP Application Components -> SAP ERP ->
SAP ERP 6.0 -> Entry by Component -> SAP XSS (Self Services)
Here you can select the Patch which you want to go after your initial installation which was SP09 i.e
For ESS
Under -> SAP ESS 600 you will get the ESS BP
Click on #OS independent -> supoose you want to go for SP13 then download
SAPESS13_0-20000512.SCA----> SAP ESS 600 Support Package 13 &
SAPESS13P_2-20000512.SCA---->Patch for SAP ESS 600 Support Package 13
similarly for MSS
Under -> SAP MSS 600 you will get the MSS BP
Only      SAPMSS13_0-20000503.SCA---->SAP MSS 600 Support Package 13
Similarly for SAP PCUI_GP 600
Under -> SAP PCUI_GP 600 you will get the SAP PCUI_GP BP (Remeber this BP must be installed first)
only      SAPPCUIGP13_0-20001215.SCA---->SAP PCUI_GP 600 Support Package 13
Also Check : https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=31476
if you have any other questions feel free to ask.
Cheers!!
SJ.

MSS Configuration within SAP Portal

Hi!
I have successfuly set up ESS for SAP ECC 6.0 IDES system within SAP Portal 7.0.
Now I would like to set up MSS scenario.
How to set up the following MSS functions?
- Team
- Budget
- Project
- Planing and Peporting
The errors I currently get by executing these functions:
Error loading template 0TPLS_0PA_C01_Q0110_V02_C
Which SAP course covers MSS?
Thank you very much!
regards
Jürgen

Hi
This SAP Course Covers ESS/MSS.
HR290 ESS/MSS System Configuration
Check these [Details|http://www.sap.com/services/education/catalog/course.epx?context=%5B%5B%7CHR290%7C%7C%7C073%7CG%5D%5D%7C]
Regards
Rajendra

No child found in WebDynproContext with name mss~eepro

Hi ALL,
We have deployed MSS 1.41 on portal 7.01 system.
BP_ERP5MSS 1.41 SP8 (1000.1.41.8.0.20100916080053)
In Manager self Service Role in portal under Team there is Employee Information service which contain General Information page,which contains below mention webdynpro components i.e,
Salary Development
Employee Search
Company Properties
Photo
General Data
Archived Documents
Related Activities
Personal Data
Absence Days
Message Box
Data Tracking
But at portal run-time, the General Information Page is blank, while the dedicated webdynrpo component at iView preview display below mention error:
com.sapportals.portal.prt.runtime.PortalRuntimeException:
Failed in WD JNDI lookup. javax.naming.NameNotFoundException:
No child found in WebDynproContext with name mss~eepro
And i have checked in System Information, component mss~eepro is not present.
So, please suggest how to resolve this issue.
Regards
hanif

Hi Hanif,
First of all you will need Self Service Administrator role to verify that the FPM configuration exists.
1. Download and Deploy the Self Service Administrator role from
Support Packages and Patches > SAP Application Components > SAP ERP > SAP ERP 6.0 > Entry by Component > Portal Content > Support Packages and Patches > BP ERP05 SELF-SERV ADMIN 1.0
2. Follow the steps mentioned in this blog to verify whether the srvconfig folder and the Employee profile folder exists. Also check do you see a corresponding FPM application.
Incase the folders and the FPM applications are not present, you are advised to redeploy the sca files corresponding to MSS.
Thanks
Prashant

Regd MSS FPM Configuration...

Similar Messages

Maybe you are looking for