Regd Wagetype and basic pay from 0008 thru internal table in smartform..

Hi,
I have a requirement where i have to display in my smartform the values for basic pay and different wagetypes from infotype 0008. In my smartform for 1 employee, only those values of wagetype and basic pay should print which are maintained in 0008. If no value then it should not display in my smartform at all (No even like 0.00).
For this i have made an internal table in my smartform. Plesae advice how can i pass these vales in my smartform.
Note* -  There is a filed in my custom inftyope 9003 - "Salary details as on (P9003-ZZDATE1). The value for basic pay and wagetype should be less than or equal to this date.

Hello Preethi,
From your thread ,what i understood is that you have created a able in the smartform.right?You can loop this table and put a condition for checking whether there any records in the internal table.
Hope this will help you !!!
Reward points if it found useful!!
Regards,
Manoj.

Similar Messages

  • Default wagetype in Basic pay infotype that depends on payscale type

    Hi,
    Just want to ask if there's a way to default different wagetypes in basic pay infotype that depends on person's pay grade area and pay grade type? Defaulting means I will not choose the wagetype in the pay group but when i choose a specific pay grade area and pay grade type the system will automatically populate the wagetype in basic pay infotype. I've tried using feature LGMST and table V_T539A but this way it is limited to employee subgroup and not by pay grade area and pay grade type.
    Hope you can help.
    Thank a lot.

    Hi,
    Note: It is not adviced to deviate from the standard or Best Practice.
    >You can copy the LGMST feature, customise pay grade area and pay grade type fields in the decision operation structure to address your requirement. Please test the consequences before implementing.
    Regards
    Chandrashekar

  • PERSONNEL PAY AND BASIC PAY

    Experts,
         I would like to know some information regarding personnel pay
          What is personnel pay and its use ?
          What is relationship between personnel pay and basic pay ?
          Where personnel pay is using in real time ?

    Hi,
    Could you describe a bit further.  What do you mean my personnel pay? ---> Employee payroll??
    If so here is goes.......
    Personnel pay, being an employee's payroll per pay period can be calculated in different ways depending on your solution.  ie:  if the employee is hourly or salary.
    An employee's basic pay info type is used by the payroll driver to calculate a valuation base (hourly rate) for each employee calculated split.  ie: 18.00 /hr or 2000.00 /per period
    This valuation base is then used in payroll to calculate the employees pay period remuneration.
    Let me know if this answers your question.
    thanks.
    JB

  • Logic for retreiving the values from a dynamic internal table

    Hi all,
    I have an issue with the logic to fetch data from a dynamic internal table into fields. let me give you guys an example the sy-tfill = 9 (subject to vary). I need to populate the fields.
    Regards,
    Sukumar

    Hi,
    this is for printing out the info in a dynamic table,
    it will work likewise to insert data.
    PARAMETERS:
      p_tabnam TYPE tabname DEFAULT 'DB_TABLE_NAME'.
    DATA:
      lv_dref TYPE REF TO data,
      ls_dd03l LIKE dd03l,
      lt_fieldname TYPE TABLE OF fieldname,
      ls_fieldname TYPE fieldname.
    FIELD-SYMBOLS:
      <fs> TYPE STANDARD TABLE,
      <wa_comp> TYPE fieldname,
      <wa_data> TYPE ANY,
      <wa_field> TYPE ANY.
    REFRESH lt_fieldname.
    SELECT * FROM dd03l INTO ls_dd03l
                       WHERE as4local = 'A'
                         AND as4vers  = '0000'
                         AND tabname  = p_tabnam
                       ORDER BY position.
      ls_fieldname = ls_dd03l-fieldname.
      APPEND ls_fieldname TO lt_fieldname.
    ENDSELECT.
    IF NOT ( lt_fieldname[] IS INITIAL ).
      CREATE DATA lv_dref TYPE TABLE OF (p_tabnam).
      ASSIGN lv_dref->* TO <fs>.
      SELECT * FROM (p_tabnam) INTO TABLE <fs>.
      WRITE:
        / 'CONTENTS OF TABLE', p_tabnam.
      LOOP AT <fs> ASSIGNING <wa_data>.
        SKIP.
        WRITE:
          / 'LINE', sy-tabix.
        ULINE.
        LOOP AT lt_fieldname ASSIGNING <wa_comp>.
          ASSIGN COMPONENT sy-tabix OF STRUCTURE <wa_data> TO <wa_field>.
          WRITE:
            / <wa_comp>, <wa_field>.
        ENDLOOP.
      ENDLOOP.
    ENDIF.
    grtz
    Koen

  • How to transfer data from a dynamic internal table

    Hi All
    I want to transfer data from a dynamic internal table<dyn_table>
    to a non dynamic internal table itab which should have the same structure as <dyn_table>.
    How can this be done?
    Regards,
    Harshit Rungta

    As stated earlier this can be done only through field symbols...
    You cannot create an non dynamic internal table with ANY structure...using DATA statement
    If the strucutre is defined well and good...you can create an non-dynamic internal table...
    If you do not know the structure then the internal table has to be dynamic...and to be generated using field symbols
    DATA: lv_ref TYPE REF TO data.
    FIELD-SYMBOLS: <fs_dyn_table> TYPE STANDARD TABLE.
    * You create a dynamic internal table...
    CREATE DATA lv_ref LIKE (your_dynamic_internal_table).
    ASSIGN lv_ref->* TO <fs_dyn_table>.
    Now...do the transfer.
    <fs_dyn_table> = "your_dynamic_internal_Table
    Hope it helps!

  • Upload data from Excel to Internal table in ECC

    Hello SDN,
    Here I am facing a problem for uploading the data from excel sheet to internal table in ECC6.0
    Main problem is we don't have any FM ALSM_EXCEL_TO_INTERNAL_TABLE.
    Please provide me the solution how to upload the data from excel to internal table through class. If possible please provide me the sample code so that it will be very helpful for me.
    Waitingfor your valuable response.
    Thanks & Regards,
    Kumar.

    Hi,
    you can use OLE to acces (not only) excel, but this will only work in dialog processing.
    regards,
    Hans

  • In SRM How to upload data from Excel to Internal Table

    Hello Experts,
    As seen the Function Module 'ALSM_EXCEL_TO_INTERNAL_TABLE' does not exists in SRM.
    Is there any alternative to upload the data direct from excel to Internal table using any other FM. As seach did't get any relevant FM.
    Please advice..
    Thanks..

    did u try this
    TEXT_CONVERT_XLS_TO_SAP
    in this manner
    CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header              = 'X'
          i_tab_raw_data             = lt_raw
          i_filename                 = p_path
        TABLES
          i_tab_converted_data       = gt_output
        EXCEPTIONS
          conversion_failed          = 1
          OTHERS                     = 2.
    this FM works on DOI
    so
    SAP document about DOI:
    http://help.sap.com/saphelp_nw2004s/helpdata/EN/e9/0be775408e11d1893b0000e8323c4f/frameset.htm
    SAP Demo Program about DOI: SAPRDEMOEXCELINTEGRATION.
    the fm you mentioned works on OLE
    so you could refer,
    SAP document about OLE:
    http://help.sap.com/saphelp_46c/helpdata/EN/59/ae3c98488f11d189490000e829fbbd/frameset.htm
    Also you can refer this post
    Download of SRM Contracts in Excel - Unit of Measurement Missing
    Let me know if this works ..
    Regards
    Manthan.
    Edited by: Manthan_R on Feb 23, 2010 12:18 PM

  • To upload data from excel to internal table

    hi
    in excel sheet it contains 4 tabs.to upload data from excel to internal table i have used this fm
    text_convert_xls_to_sap .but error wil comeing.that error in tables parameter.iternal table does not contain data.ple help me.(v 6.0) ple give me one example with coding

    Hello,
    Take a look on this: [ABAP - Upload data from Excel to Sap using OO|https://wiki.sdn.sap.com/wiki/x/xOw].
    Regards.

  • How to Import customized internal table to smartform from Print Program

    Hi Gurus,
    I want to Import customized internal table to smartform from print program, Can anybody tell me how it is possible.
    With regards,
    S.Saravanan

    There is no problem passing an internal table to a smarforms, smartforms have the same interface as a function module ([Defining the Form Interface|http://help.sap.com/saphelp_nw70/helpdata/en/1c/f40c5bddf311d3b574006094192fe3/frameset.htm] in [Smart Forms|http://help.sap.com/saphelp_nw70/helpdata/en/a5/de6838abce021ae10000009b38f842/frameset.htm]) so could you elaborate a little more on your requirement (is it a standard a custom forms, etc.)
    Regards,
    Raymond

  • How to read the method and put that code in 1 internal table

    Hi,
    Actually in the normal ABAP, if we want to read the report,  then we will write read report statement.
    If we want to read method then this statement will not work.
    So, to read the method and put that code in 1 internal table , which statement we need to write?
    Regards,
    Radhika

    Hi Naimesh,
    Thanks for your reply.
    As, i am not aware of ABAP Objects i am having some issues:
    Actually that is working for some methods in some classes.
    Here 1 issue is there:
    In se24 1 method is there in 1 class.
    Even by using that FM in SE37 i am able to get the program name by giving class and method name,
    but while using that FM in the program i am not able to get that program name.
    so, i am unable to read the source code of the program?
    1 example here:
    Class name is CL_GUI_FRONTEND_SERVICES.
    in this class, methods like FILE_EXIST , FILE_GET_SIZE, etc are there.
    By giving the class name and method name i am able to get the program name also,
    but while using that FM in the program i am not able to get that program name.
    so, i am unable to read the source code of the program?
    Here is my code:
    REPORT  Z16059_SCAN_METHOD.
    DATA: BEGIN OF I_PROGRAM OCCURS 0,
          LINE(256) TYPE C,
          END OF I_PROGRAM.
    DATA METHOD TYPE PROGRAM.
    DATA: BEGIN OF I_STRUCTURE,
          CLS_NAME(30) TYPE C,
          METH_NAME(61) TYPE C,
          END OF I_STRUCTURE.
    I_STRUCTURE-CLS_NAME = 'CL_GUI_FRONTEND_SERVICES'.
    I_STRUCTURE-METH_NAME = 'CL_GUI_FRONTEND_SERVICES-FILE_EXIST'.
    CALL FUNCTION 'SEO_METHOD_GET_INCLUDE_BY_NAME'
      EXPORTING
      MTDKEY             =  I_STRUCTURE
    IMPORTING
       PROGNAME          = METHOD
    EXCEPTIONS
       INTERNALMETHOD_NOT_EXISTING      = 1
       OTHERS                             = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    READ REPORT METHOD INTO I_PROGRAM.
    Please help me out in this regard.
    Thanks & Regards,
    Radhika

  • How to Read records from structure to internal table

    HI,
    Can any body know how to read the records from structure to internal table at runtime.
    please give me sample program if possible.
    thanks in advance
    KP

    if your internal table is having the same structure as the structure you are reading the values from then you can directly assign like..
    internatable table work area or header line = structure.
    or else if they are different assign field by field like
    internal table-field1 = structure-field1.
    internal table-field2 = structure-field2.
    award points if it helps.

  • CTC Cal in basic pay IT 0008

    Hi,
    my qst was already in previous thread but dint get proper resolution.
    I want to cal IT 0008 based on CTC.
    Exp: CTC of an employee is 60,000p/m it shld breakup like
    Basic pay 50% of CTC
    HRA 50% of basic etc
    So for that i have copied /tpa wt to custome wt 5550 - as CTC WT and other regular componend with mb10
    i have assigned WT 5550 to v_t510 as
    3     I3G1     01     5550(ctc)       01.01.1990     31.12.9999     40,000.00      INR
    3     I3G1     01     5553(conv)     01.01.1990     31.12.9999     800.00              INR
    And in table v_t539j as
    PRZNT     /TPA        Total Package     1     01.01.1900     31.12.9999     5550     CTC                 100.00 %
    PRZNT     5551     Basic Pay     1     01.01.1900     31.12.9999     5550     CTC                    50.00 %
    PRZNT     5552     HRA               1      01.01.1900     31.12.9999     5551     Basic Pay     50.00 %
    and when i cheCK IT 0008 values are not trigerring so plz tell me where i went wrong plz
    Req is for indian payroll
    Thanks
    Edited by: Vibinsap on Feb 21, 2012 10:32 AM

    Hi,
    Please configure the flexible benifit package as per your requirement.
    Bhairava

  • Positive time and basic pay

    Dear All,
    What will happen to basic pay (infotype 8)  when the employee has clock time of 3 hrs and his planned working time is 8 hrs for the day
    (processing class reduction factor 10 set to 1).
    regards
    NKMP

    1. Are you using clock in / clock out. If so is this 3 hrs is after reqular schedule or during the regular schedule
                 yes using clock in / clock out. 3 hrs during the regular schedule. employees worked less time
    2. Are you using standard timeschema? yes
    3. If you say the employee is salaried, what are the wagetypes you are maintain in IT0008?
          basic, hra, special allowance
    now since he had clocked in less time for the day. How his basic,hra, special allowance will be calculated
    regads
    NKMP

  • ADF 11g can not select and copy data from cell of readonly table in IE

    hi,
    In ADF 11g, when render view object as readonly table with Single RowsSelection, using IE browser can not select and copy data from the cell, but it work in firefox.
    is it a bug?
    Edited by: kent2066 on 2009-5-18 上午8:46

    Hi Timo,
    Sorry forgot to mention versions.
    We are using 11.1.1.7 and IE 9.
    I tried in Google but could not get the solution.
    Kindly let me know solution for this.
    PavanKumar

  • How To UPLOAD a DATA (.DAT) fiel from PC to internal table and then split it into the data different columns

    Hi all,
    I am new to ABAP Development. I need to upload a .DAT file (the file doesn#t have any proper structure-- Please find the .DAT file in the attachment). After uploading the DATA (.DAT) fiel I need to split in into different columns. Refering the attached .DAT fiel the fields in bracets like:
    [Arbeitstag],  [Pecunia], [Mita], [Kunde], [Auftrag] and  [Position] are different fields that need to be arranged in columns in an internal table. this .DAT fiel which I want to upload and then SPLIT it into various fields will will treated as MASTER DATA table for further programming. The program that I had written is as below. Also please refer the attached .DAT table.
    Please if any one could help me. i searched a lot in different forums but couldn't find me  a solution. Also note that the attached fiel is in text (.txt) format here but in real situation the same fiel is in DATA (.DAT) format.
    *& Report  ZDEMO_ZEITERFASSUNG9
    REPORT  ZDEMO_ZEITERFASSUNG9.
    Types: Begin of ttab,
            Rec(1000) type c,
           End of ttab.
    DATA: itab  type table of ttab.
    DATA: wa_tab type ttab.
    DATA: file_str type string.
    Parameters: p_file type localfile.
    At selection-screen on value-request for p_file.
                                           CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
                                            EXPORTING
    *                                          PROGRAM_NAME        = SYST-REPID
    *                                          DYNPRO_NUMBER       = SYST-DYNNR
    *                                          FIELD_NAME          = ' '
                                               STATIC              = 'X'
    *                                          MASK                = ' '
                                             CHANGING
                                               file_name           = p_file.
    *                                        EXCEPTIONS
    *                                          MASK_TOO_LONG       = 1
    *                                          OTHERS              = 2
    Start-of-Selection.
      file_str = P_file.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                      = '\\10.10.1.92\Volume_1\_projekte\Zeiterfassung-SAP\BUP_ZEIT.DAT'   " This the file  source address
          FILETYPE                      = 'DAT'
          HAS_FIELD_SEPARATOR           = ';'
    *     HEADER_LENGTH                 = 0
    *     READ_BY_LINE                  = 'X'
    *     DAT_MODE                      = ' '
    *     CODEPAGE                      = ' '
    *     IGNORE_CERR                   = ABAP_TRUE
    *     REPLACEMENT                   = '#'
    *     CHECK_BOM                     = ' '
    *     VIRUS_SCAN_PROFILE            =
    *     NO_AUTH_CHECK                 = ' '
    *   IMPORTING
    *     FILELENGTH                    =
    *     HEADER                        =
        tables
          data_tab                      = itab
       EXCEPTIONS
         FILE_OPEN_ERROR               = 1
         FILE_READ_ERROR               = 2
         NO_BATCH                      = 3
         GUI_REFUSE_FILETRANSFER       = 4
         INVALID_TYPE                  = 5
         NO_AUTHORITY                  = 6
         UNKNOWN_ERROR                 = 7
         BAD_DATA_FORMAT               = 8
         HEADER_NOT_ALLOWED            = 9
         SEPARATOR_NOT_ALLOWED         = 10
         HEADER_TOO_LONG               = 11
         UNKNOWN_DP_ERROR              = 12
         ACCESS_DENIED                 = 13
         DP_OUT_OF_MEMORY              = 14
         DISK_FULL                     = 15
         DP_TIMEOUT                    = 16
         OTHERS                        = 17
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      LOOP at itab into wa_tab.
            WRITE: / wa_tab.
      ENDLOOP.
    I will be grateful to all you experts for ur inputs
    regards
    Chandan Singh

    For every Auftrag, there are multiple Position entries.
    Rest of the blocks don't seems to have any relation.
    So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
    Try out this snippet.
    DATA lt_data TYPE TABLE OF string.
    DATA lv_data TYPE string.
    CALL METHOD cl_gui_frontend_services=>gui_upload
      EXPORTING
        filename = 'C:\temp\test.txt'
      CHANGING
        data_tab = lt_data
      EXCEPTIONS
        OTHERS   = 19.
    CHECK sy-subrc EQ 0.
    TYPES:
    BEGIN OF ty_str,
      a1 TYPE string,
      a2 TYPE string,
      a3 TYPE string,
      p1 TYPE string,
      p2 TYPE string,
      p3 TYPE string,
    END OF ty_str.
    DATA: lt_str TYPE TABLE OF ty_str,
          ls_str TYPE ty_str,
          lv_block TYPE string,
          lv_flag TYPE boolean.
    LOOP AT lt_data INTO lv_data.
      CASE lv_data.
        WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
             OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
          lv_block = lv_data.
          lv_flag = abap_false.
        WHEN OTHERS.
          lv_flag = abap_true.
      ENDCASE.
      CHECK lv_flag EQ abap_true.
      CASE lv_block.
        WHEN '[Auftrag]'.
          SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
        WHEN '[Position]'.
          SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
          APPEND ls_str TO lt_str.
      ENDCASE.
    ENDLOOP.

Maybe you are looking for