Regenerating Proxies - list view hangs client
Just wondering if anyone else has come up against this one?
If in the Asset window in the list view, and I attempt to regenerate proxies on a clip, the client freezes. I have to force-quit the client.
Upon restarting the client and inspecting the Search All Jobs I find that the regeneration of proxies did not occur (no surprise) and there is no record of it being actioned.
If in the Asset window in thumbnail view, and I attempt to regenerate proxies on a clip - no issue.
I, too, am suffering this same bug. I didn't realize it was only in list view until this thread. Thank you.
-Cory
Similar Messages
-
Share to open in List View on Client
Currently I'm running Snow Leopard Server 10.6.8. Clients home folders are stored on an external drive and they also connect to a shared volume.
When the open the shared volume it opens in list view everytime. How do I get the volume to mount in list view?Hi Meherally. Thanks for the tip, but my problem isn't related to the process for setting default viewing options. Perhaps some clarification will help.
"Next, select 'view options' from 'view' menu. As you say, the window will have "always show in icon view" but note if the box next to is checked or unchecked. If checked, uncheck it."
This box is always unchecked. The problem is that when I change views in the finder window (from icon, to list or coverflow, or whatever, the "view options"menu always says "always open in icon view". It does not change according to whatever view I am using. this only happens in iDisk. All other folders and disks open just the way I have set them.
In my office I have an iMac G5 running Leopard that works perfectly (in other words, I can set my iDisk view default to always open in whatever view I please), but my new MacBook Pro running Snow Leopard appears to have a bug that prevents this option with iDisk only. The checkbox always says "Always open in icon view" no matter what view I switch to in the finder window. As mentioned above, the iDisk is the only problem. It always opens in icon view and the checkbox does not change with the current window view. All other folders and disks on the MacBook open jsut the way I want. But I'm getting irritated with iDiks always opening in icon view.
Thanks!
I've not come across anyone else reporting this problem on any other forum. -
Finder hangs when sorting in list view on external USB3 portable Seagate
This seems to be a specific Mavericks Finder issue as I have a Mountain Lion backup that does not have this problem. Finder hangs on the Seagate when selecting the Music folder that holds all of my music files (over 300 GB) organized by iTunes in artist and album folders.
I keep two backups, one on an external 1 TB portable USB 3 Seagate drive (5400rpm) and one on an external 2 TB portable USB 3 Toshiba (5400rpm) drive. Sorting thru the iTunes Media/Music folder in any way on my internal HD and on the Toshiba is almost instant and navigation/scrolling is fast. On the Seagate, using Column and grid view works well, even setting the column view to sort (I use Modification Date) causes no hangs and I can easily scroll and select any artist, album or song. But as soon as I select List View for the Music Folder, it starts counting the files and hangs with a spinning beach ball FOREVER. I have to relaunch the Finder and instantly click off the window as it will otherwise hang immediately.
This only happens on the external Seagate, I can easily navigate and scroll the Music folders - which are identical - on my main and external Toshiba drive.
Here's what I did to troubleshoot this issue:
Deleted Finder pref. files (com.apple.finder.plist including lock file inside my Library folder, there were 4 who had some random numbers at the end.
Set all and specific folder views and list views to not sort
Ran Disk Utility from both internal and Rescue partition (no errors found)
Ran Onyx scripts to clean up and do maintenance (no issues popped up)
Booted up in Safe Mode and deleted pref files (as suggested on another forum)
Reset PRAM
Confirmed this issue with other Mavericks boot drives and one Mountain Lion full backup.
I use Soundflower (mentioned in another post), Caffeine, and MenuMeters
Any ideas? Any other preference files to delete?Thanks so much for getting back to me so quickly!
FYI, it seems specifically to happen when I expand a lot of folders in List View, and especially when I have multiple finder tabs/windows open—but that could just be subjective impression. There are no crash reports or anything in Console—I don't know of any other way to monitor the process.
I deleted the finder plist. I also uninstalled and reinstalled XtraFinder—which I’m quite sure wasn’t the problem, since it happened regardless of whether it was installed. In fact, if anything, it seems to crash less when Xtrafinder is active. I did have an additional (second) finder plist file which I deleted—I believe it was left over from TotalFinder—but that didn’t seem to fix it, although it also seems to be happening less frequently.
It’s definitely some sort of bug, and really only bothers me when trying to sort by Date—which can be done other ways, of course.
Will definitely keep you up to date if it changes, and thanks kindly again for your response. -
Show the Read more link in the list view webpart using Client side Rendering
Hi,
I have a share point list name as Team.It contains two columns like Role(single line of text) and Name( people and picker).
I want the display the list view webpart like below format using JS Link/Client side rendering concept.
If list contains more than 3 items (display like this)
>TeamMemberName1
>TeamMemberName2
>TeamMemberName3
Readmore... (Read more link should expand all the team members)
If list contains more than 3 items (display like this)
>TeamMemberName1
>TeamMemberName2
>TeamMemberName3
Could you please provide the code.It is very urgent for me.
Thanks for the help!!!(function () {
debugger;
//Create our Namespace object to avoid polluting the global namespace
var pfh = pfh || {};
//Define our Header Render pattern
pfh.renderHeader = function (ctx) {
var headerHTML = "<ul>";
return headerHTML;
pfh.renderFooter = function (ctx) {
//Define any footer content here.
var footerHTML = "</ul>";
return footerHTML;
pfh.CustomItem = function (ctx) {
var itemHTML = "<li>" + ctx.CurrentItem.TeamMemberName[0].title; + "</li>";
return itemHTML;
//Define any code/function that needs to be run AFTER the page has been completed and the DOM is complete.
pfh.PostRenderCallback = function (ctx) {
//Define the function that will register our Override with SharePoint.
pfh.RegisterTemplateOverride = function () {
var overrideCtx = {};
overrideCtx.Templates = {};
overrideCtx.Templates.Header = pfh.renderHeader;
overrideCtx.Templates.Footer = pfh.renderFooter;
overrideCtx.Templates.Item = pfh.CustomItem;
overrideCtx.onPostRender = [pfh.PostRenderCallback(ctx)];
overrideCtx.BaseViewID = 98; //Note: We're using BaseView ID 99 to match our override below
overrideCtx.ListTemplateType = 100;
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(overrideCtx);
//Now we load in our override to ensure that this Override is only applied to the intended ListView
ExecuteOrDelayUntilScriptLoaded(function () {
var OldRenderListView = RenderListView;
RenderListView = function (ctx, webPartID) {
if (ctx.ListTitle == "Test") {
ctx.BaseViewID = 98;
OldRenderListView(ctx, webPartID)
}, 'ClientTemplates.js');
//Register for MDS enabled site otherwise the display template doesn't work on refresh
//Note: The ~sitecollection tokens cannot be used here!
RegisterModuleInit("/_catalogs/masterpage/Display Templates/csr_ovr_RenderListTemplate_Fixed.js", pfh.RegisterTemplateOverride); // CSR-override for MDS enabled site
pfh.RegisterTemplateOverride(); //CSR-override for MDS disabled site (because we need to call the entry point function in this case whereas it is not needed for anonymous functions)
I am using the above script to render the items.
I am new to the CSR.
Where do i need to include your script in my script.
Please help on this.
Thank you for reply sagar.
Please note that i am not using content search webpart. -
Xtrafinder seems to have broken my 'list view' in Finder. Please Help.
I'm using 10.9.4.
I installed XtraFinder a couple of days ago and instantly my Finder didn't work in list view or column view
I can still use it in icon view but none of the others
I've attached an image as an example of what happens when I switch to list view from icon view. I have completely uninstalled Xtrafinder using its own uninstall method.It's not really clear that you still have a problem, but if you think you do, see below.
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/, /\'$'\n''/g;p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get path of every login item'" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Excel like 'Freeze column header' functionality in sharepoint OOB list view webpart
Hi,
I have OOB external list dropped on a page as listview webpart. It contains many records and hence while scrolling down headers are no available, hence it should freeze all column headers while scrolling down the page. Its directly dragged and dropped
on site page hence no server side formatting can be done.
Is there any way we can apply some client side script to freeze column headers to listview webpart while scrolling down? or any settings that can be done to acheive this?
Thanks in advance.
Regards,
RahulHi Rahul,
Normal techniques for freezing the header row of an HTML table tend to fall short when it comes to SharePoint 2010 lists due to the lack of THEAD elements.
You can try something like this, although you may want to test it in various browsers in case the column heading alignment is off.
<style>
.ms-viewheadertr{background-color:white;}
</style>
<script>
/* wrap the table in a div, set its height, give it scrollbars, and move it down */
var myTable = document.querySelector(".ms-listviewtable");
var wrapperDiv = document.createElement('div');
wrapperDiv.setAttribute("ID","FreezePaneWrapper");
wrapperDiv.setAttribute("style","OVERFLOW: auto; HEIGHT: 400px; padding-top:38px;");
wrapperDiv.appendChild(myTable.cloneNode(true));
myTable.parentNode.replaceChild(wrapperDiv,myTable);
/* Freeze the header row and move it up*/
var headerRow = document.querySelector(".ms-viewheadertr");
document.getElementById("FreezePaneWrapper").style.width = "" + headerRow.scrollWidth + "px";
headerRow.style.width = "" + headerRow.scrollWidth + "px";
headerRow.style.position = "absolute";
headerRow.style.top = ""+(headerRow.offsetTop-39)+"px";
/* Tell the header's columns to be the same width as the cells in the first "alternating" row */
var columns = document.querySelector("table.ms-listviewtable tr.ms-alternating").querySelectorAll("tr>td");
headers = document.querySelectorAll("tr.ms-viewheadertr th");
for(var i = 0; i < headers.length; i++){
if(columns[i].scrollWidth > headers[i].scrollWidth){
headers[i].style.width = ""+columns[i].scrollWidth + "px";
}else{
columns[i].style.width = ""+headers[i].scrollWidth + "px";
</script>
Edit: Also, you may want to inspect the HTML attributes on the external list view to be sure the class names match up with the querySelector parameters above. Specifically, the table should have a class of "ms-listviewtable", the header row should
have a class of "ms-viewheadertr", and rows of alternating background color should have a class of "ms-alternating".
If any of those are different in your case, you may be able to adjust the above code accordingly. -
Calendar - Trouble printing in list view
I want to print all events and items on each of my calendars (so that ultimately I can combine them into one and know that whatever should be there, is).
I’m in list view, but the print option seems to stick or hang when it gets to ‘Calculating layout…’ The Calendar app remains open. (It hasn’t crashed or frozen.)
How do I fix this? Also, is there a maximum limit as to the date range to insert as an option? (I’ve tried narrow ranges but this hasn’t yet worked, either.)
Thank you!I have not understood why this problem was occurring, but I have found a solution which is to force the calendar entries to be reset from Mobile Me. I did this:
1 Did a backup in iTunes in case it went horribly wrong.
2 Went into iphone>settings>Mail Contacts Calendars > (Mobile Me Account) > Switched off calendars - told it to delete entries on iphone.
3 Turned off iphone
4 Waited a bit
5 Turned iphone on
6 Repeated 2 and switched on calendars.
7 Waited a bit for Mobile Me to sync
All calendars restored nicely..
Why this problem occurred in the first place is a mystery. Unlike other punters, I didn't have itunes syncing my calendars to iphone, only Mobile Me........... It has the strong smell of a bug as this problem emerged after many months of trouble free syncing only when I updated to iphone 3. -
How to add List view to SharePoint 2013 app
Hi
I'm developing intranet metro style app as SharePoint 2013 auto hosted . i need to get promoted list to display in my app page as it is display in SharePoint host site. i have seen some blog post but no clue of detail way of doing it (http://www.greggalipeau.com/2013/12/25/adding-list-views-to-sharepoint-2013-apps)
Can any one let me know how to do this in a way steps to follow or any information on this highly appreciated.
Kind regards
Radikahttp://newscarrouselapp.codeplex.com/ Download sample
http://nettitude.wordpress.com/2013/01/27/creating-a-carousel-in-a-sharepoint-app-using-client-side-rendering/
http://webcache.googleusercontent.com/search?q=cache:t4nEmPtXxtQJ:sp2013.blogspot.com/2012/08/use-list-view-in-sharepoint-2013-apps.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-a
<WebPartPages:WebPartZone runat="server"
FrameType="TitleBarOnly" ID="full" Title="loc:full" >
<WebPartPages:XsltListViewWebPart ID="XsltListViewWebPart2"
runat="server" ListUrl="Lists/SlideShow" IsIncluded="True"
NoDefaultStyle="TRUE" Title="Slideshow Images"
PageType="PAGE_NORMALVIEW" Default="False"
ViewContentTypeId="0x">
</WebPartPages:XsltListViewWebPart>
</WebPartPages:WebPartZone> -
PE 9 and 10 Help PDF Invalid List View Descriptions
Bottom line: Has anyone reported on these problems, and, if so, what is being done about them?
Until proven otherwise, I believe that Premiere Elements 9 and 10 Help PDF requires editing of its List View Descriptions which are appropriate for at least version 8.0/8.0.1, 7, and 4, but not versions 9.0/9.0.1 and 10. Please refer to the Help PDF Projects/View Clip Properties
for version 10:
http://help.adobe.com/en_US/premiere...B-312BB3F13B11
for version 9:
http://help.adobe.com/en_US/Premiere...355c-7f98.html
Problems in this regard for Premiere Elements later than version 8.0/8.0.1 and not for versions 8.0/8.0.1, 7, and 4:
1. List View Properties display in text for export video file, no Data Rate Analysis graphs
2. List View Columns, no ADD to add your own columns, so only Adobe built in ones, and none of the Adobe built in ones, like Client, allow for editable text.
Comments:
Data Rate Analysis
I had read somewhere that these graphs appear for tape based rather than non tape based imports. Mini test: Premiere Elements MPEG4.avi import and DV AVI export of the MPEG4.avi. Results: Version 8.0/8.0.1 Properties for import in text format (file properties) only and Properties for export in text format (file + export properties) as well as display of Data Rate Analysis graph. Versions 9 and 10 Properties for import (file properties) and for export (file + export properties), both import and export text only.
List View Columns
1. If I look at the project.prel WordPad documents and the Client Column information there in each, I do not see any difference.
2. If I create a Premiere Elements 8.0/8.0.1 project, set List View column choices Comments and Client, type in the comments and client information, and save/close/and re-open the project in:
a. Premiere Elements 9.0/9.0.1, the Comments columns and its information will not appear; the Client column will appear, but its information will not be editable. (The 9.0/9.0.1 version does have Client, but not Comments, as a built in choice under Edit Columns)....the latter might explain why no Comments column except...
b. Premiere Elements 10, neither the Comments nor Client columns and their information will appear. (The 10 version does have Client, but not Comments, as a built in choice under Edit Columns.)
One of the Potential Problems:
It is well accepted that, if you edit a project from an earlier version in a later version, you cannot go back to the earlier version for editing. So, one potential problem that I see in all this is the loss of this type of information on upgrading from 8.0/8.0.1 and earlier....
a. If you create a Premiere Elements 8.0/8.0.1 or earlier project which includes Comments and Client information in these List View Column choices, you will lose all that information in version 10 and have only non-editable Client information in version 9.
And, yes we have filed an Adobe Feature Request/Bug Form on this one.
Any comments about what I may have overlooked in trying to get those Help PDF List View Descriptions to work for me would be appreciated.
Thanks.
ATRI definitely agree that the Help files could use some updating, Tony.
-
List view is blank in event browser
I have noticed something strange in Final Cut ProX. If I select an event in the Event Browser while in Film Strip View I can see all of the files that are in that event. If I click on the icon to show clips in List View, none of my files can be seen in the Event Browser. If I then click back on the Film Stip View, the Event Browser stays blank. The only way to get it working again in Film Strip View is to close and re-open Final Cut ProX.
Am i doing something wrong or is there a problem with the program. I purchased the Ripple Training series and it seems that I should be able to just jump back and forth between the two views.
Thanks for the help.Due to the silence, I figured nobody else had this problem so I went ahead and called Apple for assitance. The issue turned out to some sort of corruption in my preferences. I was able to resolve the problem by trashing my preferences file.
In case some else has a similar strange issue, it is very easy to trash your preference file.
1) Close FinalCut Pro X
2) Open a finder window
3) Go to Library\Preferences
4) Find the file "com.apple.finalcut.plist"
5) Delete the file "com.apple.finalcut.plist"
6) Restart your computer
7) Open FinalCut Pro X and it should be like when you first started the program
This does not seem to impact any of your previously imported events or projects -- it just resets the program settings. -
Missing views dropdown on list view web part.
I asked this before, and it got moved to "admin" with no replies. I really need to know this. I think it may be appropriate for design and customization, because I think that's what the solution may require. It doesn't appear to be an "admin" issue.
Any help will be gratefully received. I am very frustrated by this. The "View:" dropdown list on the right side of the list view web part for my document libraries is not available. The truly weird thing is that in a few cases, it is there, but I can't tell any difference between those web parts or DLs and the ones without the views drop-down. I have defined several public views for each document library. There are no "closed" web parts on the page (which was one suggestion I got).
I can't figure out why the views menu sometimes appears and sometimes does not, when there appears to be no way to control it. Can anyone enlighten me or suggest how I can make it appear? My users are threatening to demand a separate web part for each view (there are hundreds). I may have trouble using SPD on the client's site.That works if the Web Part was Closed, but does not help if the user deleted the Web Part.
After some digging around in SharePoint Designer and in SharePoint itself, I have a solution for restoring the View dropdown after the out-of-the-box List View Web Part has been deleted. This solution can be accomplished without SharePoint Designer if you are working with a library, but to clean out the views from a list, you will need SharePoint Designer. I am doing this in MOSS 2007 SP1, but it should work for WSS 3.0 as well.
For this example, I am using a document library called Public Documents and my View is allitems.aspx, but this should work for any list or library.
Here are the steps for bringing back the View dropdown:
1. Navigate to the list or library that is missing the View dropdown
2. Go to Site Actions > Edit Page > Add a Web Part . In the Lists and Libraries section, check the box next to the Public Documents library and click the Add button.
3. Within the new Web Part, go to edit > Modify Shared Web Part and change the Toolbar Type to “Full Toolbar”. Click the OK button.
4. Click the link to Exit Edit Mode and you should have the Full Toolbar for the list/library displayed, but it is still missing the View dropdown menu.
5. Go to Settings > Create View .
6. Choose Standard View .
7. Name the view, check the “Make this the default view” box, select the columns to include, and click the OK button.
8. Voila, the View dropdown menu is back on the site.
9. To completely clean it up, for a list, open in SharePoint Designer and delete the allitems.aspx view from the Forms folder. For a library, you can go to the Actions menu and select Open with Windows Explorer . Open the Forms folder (you may need to show hidden files to see this folder) and delete the allitems.aspx view. If you do not have access to SharePoint Designer and you are working in a list, you will need to delete the link on the Quick Launch and add again to point to your new view name.
10. If the View you deleted was the default for the list or library, it may remove the link from the Quick Launch. It can be added again by going to View All Site Content , selecting the appropriate list or library, going into its Settings menu, and modifying the Title, description and navigation settings to show on the Quick Launch. -
Hello all,
I have what so far appears to be a fairly unique problem. We are running a multilingual SharePoint 2010 environment with English as the default language and French as the secondary. We have setup the sites in a variance relationship, but the
issue I am discussing happens outside of a variant as well.
We have created a library outside the variant (but within the collection) that the two sites must share. A list view web part was created via Designer to add to each site to provide a quick view into the list. If we are in the libary and switch
to French, then update the column label it will remember the setting (because of the resource file) and maintain it as the language is flipped back and forth. Where it doesn't work is as a web part in a variant or where the language is different.
If the language is different, the out of the box columns work find, but the custom columns (all site columns not library\list columns) remain as the english label. It doesn't matter if within a variant or outside with the browser language changed.
It always reverts back to English. It's like it isn't using the same resource file that was used in the list itself.
I created a custom view and modified it with xslt as per
http://sharepoint.stackexchange.com/questions/50004/how-to-change-column-title-for-a-view-but-not-modify-the-list but this only worked within the list and did not occur in the list view either.
I can't be the first that has come across it, either I am not performing my searches properly, no one has ever documented a fix for this or this is something we just can't fix with OOTB tools. That's the other thing, the solution has to be accomplised
OOTB or with minor client side changes. I can't fire up Visual Studio because they are piloting Office 365 and have put a "No custom code" mandate on for migration.
Thank you all in advance.Ok, I have come up with a solution. I edited the XSLT for the web part on the page. I did the following:
1. Create the variants in the Site Ccollection
2. Create the library outside of the variants.
3. Add all the columns you require for the library. It is very important all the columns are there before you move on.
4. Create a French and English view.
5. Create the list view web part via designer.
6. Add the list view web part to each site selecting the appropriate view to use.
7. Edit the page in SharePoint Designer 2010.
8. Place cursor in the column you wish to modify.
9. Click Design in the List View Tools on the ribbon.
10. Then click Customize XSLT and select Customize Item. Select this option otherwise you will generate a **LOT** of unnecessary XSL code.
11. You are looking for a piece that resembles the following:
<xsl:with-param name="fieldtitle">
<xsl:value-of select="@DisplayName"/>
</xsl:with-param>
12. Modify it by typing in the actual column name you want. You should end up with something like this:
<xsl:with-param name="fieldtitle">
New Column Name.
</xsl:with-param>
13. Now, for this page only, the column will be renamed.
There are some caveats:
1. Doesn’t appear to work in a publishing portal. I think this has to do with how SP stores the pages in this case. In a publishing portal you can only modify the page layout which won’t work as we need to modify the content.
2. If you add another column, you will need to repeat the XSLT modification
Anyways, I hope this helps out any others with the same issue or need as I had. -
How to add SharePoint 2013 Promoted link list view web part in page programatically with Tiles view using CSOM. I found that it can be
done by using XsltListViewWebPart class but how can I use this one by using shraepoint client api.
shivNice, can you point me to the solution please ?
I'm trying to do this but I get an error :
Web Part Error: Cannot complete this action. Please try again. Correlation ID: blablabla
StackTrace: at Microsoft.SharePoint.SPViewCollection.EnsureViewSchema(Boolean fullBlownSchema, Boolean bNeedInitallViews) at Microsoft.SharePoint.SPList.GetView(Guid viewGuid)
All help really appreciated. -
version 12.1.2
I have a list view with 2 rows, 2 columns. column sizes are ( c1 = 85% and c2 = 15 %). C1 displays table data, and c2 has a button on each row, which takes me to different page.
When I click the button I am expecting it to take me to the next page. But for some reason I have to click the button twice to go to the next page. When I click the first time, it only highlights the
row, then when I click the second time, it takes m to the next page. Is there any special settings I need to change for a list view?
First I tried implementing row double click by using client/server listeners to take me to the next page, it showed the same behavior (had to double click twice to go to next page). So I thought it might have something to
do with the client/server listeners not working correctly. So switched to using button to go to next page and I am still seeing the same behavior. Here is my code, I would greatly appreciate any help.
<af:listView value="#{bindings.emp1.collectionModel}" var="item"
emptyText="#{bindings.emp1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.emp1.rangeSize}" id="lv1"
partialTriggers="::b6" selection="single" immediate="true"
binding="#{SomeBean.empListView}">
<af:listItem id="li1">
<af:panelGridLayout id="pgl3">
<af:gridRow marginTop="5px" height="auto" id="gr1">
<af:gridCell marginStart="5px" width="85%" id="gc1">
<af:outputFormatted value="#{item.bindings.empId.inputValue}"
id="of1"
inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
binding="#{MouseDoubleClickBean.empID}"/>
</af:gridCell>
<af:gridCell marginStart="5px" width="15%" marginEnd="5px"
id="gc2">
<af:button id="b4" icon="#{resource['images:add_ovr.png']}"
action="callEditFlow" rendered="true"
visible="true"/>
</af:gridCell>
</af:gridRow>
<af:gridRow marginTop="5px" height="auto" marginBottom="5px" id="gr2">
<af:gridCell marginStart="5px" width="85%" id="gc3">
<af:outputFormatted value="#{item.bindings.empName.inputValue}"
id="of2"
inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
binding="#{MouseDoubleClickBean.empName}"/>
</af:gridCell>
<af:gridCell marginStart="5px" width="15%" marginEnd="5px" id="gc4"/>
</af:gridRow>
<af:clientListener method="doMouseDblClick" type="dblClick"/>
<af:serverListener type="CopyEmp"
method="#{MouseDoubleClickBean.copyEmpDetails}"/>
</af:panelGridLayout>
</af:listItem>
</af:listView>
<af:resource type="javascript">
function doMouseDblClick(evt) {
var btn = evt.getSource();
AdfCustomEvent.queue(btn, "CopyEmp",{},true);
evt.cancel();
</af:resource>
Thanks.Hi,
can you try af:commandButton to see if it is a problem with af;button. If this doesn't work then it appears that there is an issue with the focus setting preventing the action to come through. A work around in this case would be to override the SelectionListener on the vlieView component and to queue the command button action (the downside is that each time you select a row it will navigate (which means you could set the button display to hidden).
I suggest to file a bug with support. If you don't have a support contract, please zip up a simple test case based on the HR schema and send it to frank <dot> nimphius < at > oracle <dot> com (replace the <dot> with . and <at> with @). The testcase should be zipped and renamed to ".unzip" as the extension
Frank -
SharePoint Online list view threshold issues: "because it exceeds the list view threshold enforced by the administrator"
Office 365 SharePoint Online can be problematic when it comes to exceeding the list item threshold (e.g. 5,000).
Examples of what happens after exceeding the threshold (e.g. 5,000 items):
You can’t create new forms for the list in SharePoint Designer.
You may have challenges with metadata fields in the forms (e.g. adding metadata values, editing metadata values, deleting the metadata column from the list).
Cannot save the list as a template (i.e. you get the threshold error).
Issue I'd like assistance with: how can I create a custom NewForm in SharePoint Designer
when the list exceeds the threshold limit, given this is Office 365 SharePoint Online and I don't have access to increase that limit?
As a control for my testing, I created another list with just a few custom columns with no list items --it worked fine for that list.
I also tried clearing local AppData cache which didn't solve it. I'd need Central Admin on O365 SharePoint Online to increase the threshold which I don't have access
to do. Errors received in SharePoint Designer:
"Could not save the list changes to the server." After getting this, I tried to work around
the create new forms issue by saving a copy of the original NewForm as NewForm2 and got the root error that I suspected was underlying it all:
“Server error: the attempted operation is prohibited because it exceeds the list view threshold enforced by the administrator”.
Any ideas for how to create a new list form in SD?Thanks Alex.
I just found a couple new workarounds instead of using SharePoint Designer:
Method 1: Add web parts to the form pages on the client side:
Go to the list and execute one of these actions depending what form you want to edit: create a new item (NewForm), edit an item (EditForm), or display an item (DispForm).
With the form you want to edit displayed, go to the gear icon and click "Edit Page".
You should now see the web part page show up with "Add a Web Part" as an option.
Add a Content Editor or Script Editor web part.
Add your custom code to either one to manipulate the HTML objects using your favorite web languages.
Method 2: Use InfoPath 2013.
The InfoPath 2013 route appears to work.
Maybe you are looking for
-
Information about configuration parameters
Does anybody know where to find information about these parameters in SXMB_ADM - Integration Engine Configuration? - BPE - DISPATCHER - MIN_DURATION_PROCESSING - BPE - DISPATCHER - PACKAGES_PER_COMMIT Thanks!
-
I noticed that after retouching photos in iPhoto on my iMac and then transfering to the iPad, the album in the iPad will still show the original photos before retouching. Is there a way to get transfer the retouched photos onto the iPad?
-
Anybody seen this error message?
I recently replaced the internal HD on my G4 Quicksilver tower and get this error message when I dock my iPod (40GB with click wheel): "The system extension /System/Library/Extensions/iPodDriver.kext/Contents/Plugins/iPodFireWireTranspo rtSupport.kex
-
HT5787 Reset Apple ID sent to email but not received
What is the average amount of time between request for reset email and receipt of said email?
-
ITunes store standard-definition TVshow comp requirements
What are the computer processor/other requirements for downloading and playing standard (as opposed to high) definition tv shows? I know that the HD shows require a dual-core 2.0Ghz processor or higher (which I don't have unfortunately....those new m