Anybody seen this error message?

I recently replaced the internal HD on my G4 Quicksilver tower and get this error message when I dock my iPod (40GB with click wheel):
"The system extension /System/Library/Extensions/iPodDriver.kext/Contents/Plugins/iPodFireWireTranspo rtSupport.kext was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update."
Things I've tried:
1.) Updated iPod software and iTunes.
2.) Deleted the extension from the Library. I dragged it to the trash, but it didn't actually delete. The next time I fired up iTunes I didn't get the error message, but I have ever since.
This error is more of an annoyance and doesn't seem to affect the docking process and the transfer of music from iTunes to my iPod.
But still.
Anybody have a similar problem and a solution. Thanks in advance

You should certainly be alarmed.  Well, sorta actually this might prevent you from making any changes, but other than that you should be fine, but fix it.  Is there a dump file created?  Are there any other processes going down?
david

Similar Messages

  • Has anyone seen this error message: "Disc burner or software not found"?

    Two weeks ago I successfully burnt a CD of Word files. Yesterday I put in a blank DVD and got a formatting error message. I didn't think too much of it (thought I had bad discs).
    Tonight I tried to burn a CD out of iTunes. I got this error message: "Disc burner or software not found"
    I suspect this is not good.
    Can anyone help? Details on the DVD drive below.
    Thanks a lot.
    Will D
    MATSHITA DVD-R UJ-857:
    Firmware Revision: HBE4
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: No
    MB 1.83, 2G RAM   Mac OS X (10.4.8)  

    Thanks for the post.
    No moving or renaming files, except for I deleted a file related to Adobe Acrobat to remove a toolbar thing. But nothing other than that.
    Are there specific files I should be looking out for?
    Thanks again.

  • Has anyone seen this error message before?

    Hi
    We have a server running Windows 2008 R2 which we have built as a demo environment for P6 R8.3 EPPM. It was upgraded to R8.3 SP1 late last year, and has just been sitting idling in between being used for product demonstrations.
    Recently I decided to let Windows Update apply a bunch of patches to the OS and the SQL Server instance running on the box - today when a colleague and I logged in to EPPM we kept getting a popup window every 10 seconds or so in front of the main portlet windows, headed "message from webpage", with the message
    Logged messages:
    message='unable to initialize AdfAgent' level=SEVERE error=message;'AdfIE8Agent' is undefined description:'AdfIE8Agent' is undefined number:-2146823279 name:TypeError at hh:mm:ss
    This happens if we access the application using IE; it does not happen if we use Chrome - can anyone offer any suggestions what might be causing it? There is nothing related to AdfAgent or AdfIE8Agent in the Oracle KB at the moment

    Sachin
    On the server where P6 + WebLogic are installed, it's IE 11
    On my client PC, it's IE 11 as well
    I am pretty sure that that the problem has only started since IE11 appeared, but that may be wishful thinking. I have tried clearing everything from the browser cache, with no difference in behaviour. I have also tried setting the emulation mode to IE8 but that didn't seem to make a difference either.
    I have restarted the P6 web app several times, and cannot see any errors in the WebAccessLog.html except for a occasional minor one related to Struts - certainly nothing that seems related to ADF directly.
    Whatever the issue is, Chrome is not affected, and I have now installed it on the server as well where it is working fine.

  • Ever seen this error message? You tried to use HTML or other restricted code. We, currently, do not allow HTML or other types of code in our message board posts or signatures. Try again with simple text only.

    Trying to load this site
    http://southcarolina.247sports.com/
    and it redirects me to this address
    http://media.247sports.com/Oops.html?aspxerrorpath=/
    and gives me the error message. "You tried to use HTML or other restricted code. We, currently, do not allow HTML or other types of code in our message board posts or signatures. Try again with simple text only. "
    Thanks for your help

    Clear the cache and the cookies from sites that cause problems.
    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • Problem emailing from LR4, anyone seen this error message?

    I just upgraded from LR3 to LR4. 
    This is the error message I get, anyone know what I am doing wrong?

    Same here. Known problem, reported by Victoria Brampton. I filed a bug report an hour ago.

  • Anyone seen this error message (pic)

    http://farm5.static.flickr.com/4131/5063609092650eab9b7db.jpg
    Just found this random error message waiting for action on my screen.
    Has anyone encountered such error message before?

    I have not encountered such an error message, but this may be an over the air update that was initiated by your carrier which failed.
    http://www.addictivetips.com/mobile/att-pushes-first-ota-update-changing-carrier -to-7-1/

  • TS3694 Has anybody had this error message: "the iphone could not be restored. an unknown error occurred (1015) ???

    the iphone could not be restored an unknown error occurred 1015

    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

  • Has anybody seen this error - Itunes

    When i click on any of these tabs Books, Movies, App Store, TV Shows, Music i get the following error.
    This is started happening from today.

    Forgot to insert the image, here it is.

  • When you update you iOS, have you seen this error message: not eligible for this build?  The serial

    Dear Mr. Jobs,
    My husband has been an avid supporter of Apple, having purchased a great deal from you over the past many years. Personally, I have been an iPhone user since it was introduced a few years ago. 
    In July 2010, I stood in line at the Apple Store in the Stanford Shopping Center to purchase the iPhone 4. In February of this year, I tried to update the iPhone and got the 'sign of death'. My iPhone turned into a piece of brick and I was not able to make any phone calls, which at that time, was very inconvenient. I remember having to coordinate a pick up at the airport early the next morning and my phone was dead. Apparently, in trying to update the phone, it corrupted the firmware and I could no longer activate that phone. It was a frustrating experience on the eve that I had to go to the airport and I spent hours trying to see if there is anything that I could do to get the phone back in working order.
    The following day, I made an appointment with the genius and my husband and I took the iPhone to the Stanford Apple Store to see if there was a problem with the phone. Without hesitation, we were asked if we purchased the phone overseas. Of course, as Asians, they probably thought that we purchased it in the black market in China. After hearing our response, their next question was whether we hacked the phone. Why would they bring up these issues? Rather than immediately delving into the problem, we found it very annoying that the employees would tried to divert Apple's problem to us. After trying to diagnose the problem, they gave us a new phone and activated it using their in-store computer. 
    We took the phone home, thinking that the problem had been solved. When we got home, we tried to update the iPhone to no avail. The firmware was corrupted and we had to once again, bring the phone back to the Apple Store in the Oakridge Mall in San Jose. The Apple employee told my husband to go to the AT&T store, as there was potentially a SIM problem. My husband went to the AT&T Store and was told that they couldn't help him, as the SIM was fine. They did, however, replace the SIM so that there would be no issue.
    In April, when there was an upgrade to the iPhone software, we once again tried to update the software and was unable to. Once again, the firmware was corrupted and we were forced to take the phone back to the Stanford store. Again, they asked us if we purchased the phone overseas. Why? They could have easily looked at the records, but no, your records are so bad that you are unable to pull it up. That afternoon, we spent four hours at the store, updating the OS on the computer as well as updating the iPhone. They assured us that they solved the problem.
    This past weekend, as there was another update to the iPhone software, we were once again unable to update it and were forced to take it back to Apple. Again, we were asked, did you buy the phone overseas. It's very frustrating and annoying to repeatedly get asked that question. After a series of back and forth communications between the genius and my husband, we were told that they didn't know what the problem was. This time, we told them that we would not be leaving the store until they solved the problem. We have an Apple computer and an Apple iPhone, so 'Apple' should find the source of the problem and fix it once and for all. The genius then suggested that we migrate the data from my computer to my husband's computer and try to update the phone using my husband's computer. We didn't accept that answer. 
    Our genius then asked the help of a second genius and after taking his suggestion, they found that the serial number for my iPhone had been assigned to France Telecom. Once again, they asked if we bought the phone overseas. Why? Please train your employees to not accuse the customers of doing this. Many of us are honest and we take offense to this. In fact, we told them that we purchased the phone from the Stanford Store (where we were at). After looking for the record, they said that we must not have purchased it from them. The onus, then, was up to us to prove that the phone was, in fact, purchased from the Stanford Store. Fortunately, my husband saved the email and was able to show the genius that the phone was purchased from them. How could your records be so poor as not to be able to find our purchase?
    After two hours at the store, we were told that we, not Apple Stanford, had to call customer care to resolve the problem. Being that this is an Apple problem, I would have expected Apple to follow up on our behalf. Why is it that the customer has to spend additional time to deal with an issue that was caused by Apple. 
    My husband has been dealing with customer care, who apparently has escalated the problem to other divisions within the organization. It's been two days and the problem still has not been resolved. In fact, the answer remains that they are not sure how to resolve the problem. Why can't you update your system and redo the record so that I can go on in peace. Every time I try to update the software, I'm afraid that I won't have a working phone. Do you blame me? 
    This has been one of the worst experiences that I have had with an Apple product and it still is not over. Collectively, my husband and I have spent over 25 hours dealing with this issue both at home and at various Apple Stores. It has been a hassle having to go from place to place, having to sync the phone multiple times, having to update the software multiple times on both the computer and iPhone and ultimately, not having it fixed once and for all. Please let me know how you expect to compensate us for this experience and how and when you expect to fix my iPhone issues.
    Mr. Jobs, I know that you expect perfection from your team. This has been a tremendous waste of time for my husband and me and has been a less than stellar experience.
    Regards,
    Lea Anne Ng

    With that one, I'd check on your Hosts file on your PC, Lea.
    Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".

  • Anyone seen this error message before ?

    I have just reset my phone back to factory settings to try and solve an elusive bug and have just put mail, contacts and music back on it. No video and no notes.
    When syncing music to the same library as before, I get the following message which I don't recognise;
    "Save multiple items to clipboard was not copied to the iPhone XXXXX because it cannot be played on the iPhone".
    There doesn't seem to be anything in the music library which corresponds to the description.
    Anyone got any insight ?

    I wouldn't call it "insight" necessarily, Graham, but just wondering if you had an app of some description on the Mac that allows you to copy contents of clipboards from the Mac to the phone, like Copy Share?
    http://isource.com/2009/07/06/copy-share-new-app-lets-you-copy-effortlessly-betw een-iphones-touches-macs-awesome/
    If so, could that (or something like that) be the source of the clipboard message?

  • Has anyone seen this error message before? If so, any suggestions?

    Happens whenever the user tries to add a signature to a PDF.

    Hi,
    I don't recognize the toolbar on the left side of the screen. Is there a third-party plug-in installed. If so, close Acrobat, move the the plug-in out of the plug_ins folder located at \Program Files\Adobe\Acrobat 9.0\Acrobat\plug_ins (don't delete, just move it somewhere else), restart Acrobat and try to sign. If the crash doesn't occur then it's being caused by the non-Adobe plug-in.
    Steve

  • Illegal Load factor 0.0 -- Has anybody seen this?

    Hi
    I am getting this weird error once in a while.
    java.lang.IllegalArgumentException: Illegal load factor: 0.0
         at java.util.HashMap.<init>(Unknown Source)
         at java.util.LinkedHashMap.<init>(Unknown Source)
         at java.util.HashSet.<init>(Unknown Source)
         at java.util.LinkedHashSet.<init>(Unknown Source)
    THis is caused by a call to something as simple as:
    Set<IAgent> result = new LinkedHashSet<IAgent>();
    Has anybody seen this error before?
    I sometimes also get this error while compiling my code inside Eclipse.
    I am afraid this could be a hardware related problems since I only see this error while running on my machine with an AMD 4800, windowsXP pro sp 2, sun jdk 1.5.0_06.
    It is not persistent. It only happens once in a while.
    Any suggestions of what could be the source of the problem?
    Marcel

    if you are saying eclipse is throwing the error, then somewhere in eclipse they have passed 0.0 as the second argument to the HashMap constructor,
    HashMap(int initialCapacity, float loadFactor)and you should post this as a bug here:
    https://bugs.eclipse.org/bugs/
    If it is your code that is doing it, don't do that.

  • Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found". This error message is seen when first starting Windows Vista, prior to starting Photoshop Elements 12.

    Error Message "ElementsAutoAnalyzer.exe unable to locate. This application failed to start because ExtendedScript.dll was not found".
    This error message is seen every time when first starting Windows Vista, PRIOR to starting Photoshop Elements 12.1 
    It does not seem to interfere with the normal operation of Photoshop Elements, but it is a constant annoyance.

    try removing all itunes and all other apple program
    follow this link for more info. http://support.apple.com/kb/HT1923
    reboot ur window after uninstalling
    after that download the latest itunes setup and install.

  • HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks

    HI, i'm having this error message [There was a problem downloading the software for the iphone "banster's iphone". An unknown error occurred (-23)] when im doing the upgrading to IOS 5. anybody know how to slove it? Thanks

    Yep, me to exactly the same problem,  the error message keeps telling me to check my internet connection  or try later.  Nothing wrong with my internet connection.  Is it an apple server problem?

  • Can anybody help me with this error message I keep getting

    When I try to export my document as a pdf I keep getting this error message...  "The document “Client Invoice_TMC copy” could not be exported as...."

    What version of Numbers?What version of Mac OS X?
    Have you tried restarting Numbers?
    Have you tried restarting your computer?
    Can you export other documents to pdf?
    Have you tried printing the docmment to pdf using the built-in print dialog?  To do this select the menu item "File > Print", then click the print button, then select the "Open in Preview" select from the PDF button in the bottom left corner:

Maybe you are looking for

  • Muse 2014.2.1.10 - place of svg - not showing right in design mode but correct in browser

    Hi, I am trying to place an svg file as a stand alone object and I am not seeing it correctly in design mode at muse. It seems to add a black stripe at the bottom of the svg covering a significant amount of the svg image. When preview at the chrome b

  • BI NW2004s Upgrade Question

    Hello All, We recently upgraded our BI systm to NW 2004s. It was a pure technical upgrade with only ABAP stack. We have not migrated into the new functionality and we are just using the old functionality. I have a few questions on adding other compon

  • Chromium Weirdness

    For some reason just this morning chromium started acting funny. The problem is with the cursor. It is like it gets stuck in one mode. So if I hover over a link then the cursor changes to a hand but then while I am on the next page it stays as a hand

  • Reverting VAT /CST during Purchase Return

    Dear Freinds, I wanted help from you"ll, I have made a Purchase Return for a material having VAT, in such a scenario how do I revert back VAT during the purchase return in the system. Similarly in place of VAT ,if the material carries CST , than how

  • Where to change duration multiple selected clips

    In previous answers I've read if you have selected all clips (Cmnd A) and you want to change duration of all still images you press Ctrl D (change duration) but WHERE on the screen do you change it. If I move the playhead it looses its Ctrl D command