Register font under Windows

Hi all,
I'm writing an Installer application for another software product, and am having difficulty finding out whether it is possible to have Java install a font under Windows correctly.
Any help you could give in whether this is possible would be greatly appreciated.
Cheers!

Hi,
Have you tried to use NI-VISA property node to control different Modem lines?
I mean that if you use NI-VISA to communicate with COM port you can create property node of your "VISA Recource control" corresponding to port. Then create its property node and go to "Properties->Modem Line settings". This allows you to control the states of CTS, DCD, DTR, DSR, RI and RTS lines.
I used it under win2000 without any problems.
Good luck.
Oleg chutko.

Similar Messages

Firefox 6 running under Windows 7 64-bit does not render fonts correctly.

The default sans-serif font for Firefox is Arial. Running Firefox 6 under Windows 7 32-bit, the font renders properly, but under 64-bit Win7, the font is too heavy, and bold or strong makes no difference. I run Win7 64-bit on a laptop computer and use Firefox 5 on it, and the fonts render properly. Possibly a Firefox 6/64-bit problem?

Hi strangerland, don't give up hope -- I'm using Firefox 36.0.4 on Windows 7 right now.
That said, I understand troubleshooting fatigue and when you find time to think about Firefox again, and have the opportunity to shut down and restart Windows, you might try testing in Windows Safe Mode with Networking, a mode that blocks some external programs that can interfere with Firefox.
* [http://windows.microsoft.com/en-us/windows/advanced-startup-options-including-safe-mode#1TC=windows-7 Advanced startup options (including safe mode) - Windows Help]
* [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Start your computer in safe mode - Windows Help]

I installed an ancient version, photoshop element 2, on PC under Windows 7 after change of computer station and it is impossible to register modification made; error message: impossible because saturated disc ....what is not the case: many space on the di

I installed an ancient version, photoshop element 2, on PC under Windows 7 after change of computer station and it is impossible to register modification made; error message: impossible because saturated disc ....what is not the case: many space on the disc. How to repair this error please?

Hello
Thank you for your answer which is interesting because it is a disk of 2 TB... If I create a partition do you think it can solve my problem? I prefer this old version of Photoshop, very practical to use...

Running DS-5 armcc compiled code (PIC) under Windows EC 2013

Hi All,
i just wanted to know if it is generally (officially) supported to run code that is compiled via the armcc (5.03) from DS-5 under Windows Embedded Compact 2013. Or if this is discouraged (reasons?).
The problem i have:
The bootloader contains some code that must be run during Windows EC Startup. So this code is loaded from the Flash, copied to RAM (reserved and commited via VirtualAlloc and marked as executable) and then the functions are called via FunctionPointers.
The code is compiled and linked as position independent and the stack base register is set accordingly before any function is called via pointer and reset when it returns.
This works in about 9 out of 10 tests without problems. But sometimes i get all sort of exceptions (Data Abort, Prefetch Abort, Unknown Instruction, ...). Most (if not all) of the time they occur when the position independent code runs on one of the two
cores.
The code runs on an i.MX6DQ (dual).
If i only enable one core, i can't reproduce the problem (i assume that multicore-handling and multithreading in WinEC 2013 Update 10 is really well tested and works without problems, so this can't be the real reason).
I've thoroughly checked and debugged the code, i'm really sure there is no illegal access or other problem with the code itself.
Could it be a problem to call code compiled via DS-5 armcc? I've compared assembler code that Visual Studio/Platform Builder generates with code that DS-5 generates (but i'm no assembler expert). I can't see any obvious special code that is added by Visual
Studio/Platform Builder (i.e. that functions need) that is not there in the DS-5 code.
Best Regards
Sebastian

So I think you could be able to image some code for ROM from another compiler and without knowledge of Windows CE. However, if the code will be called from Windows CE, this becomes more difficult requiring very careful isolation from the
MMU state, processor state, kernel/user mode, etc. Code that works great when called from the bootloader might not work at all from Windows CE itself. The main problem with mixing code from different compilers is the object file format and conventions for
entry and public names. Very unlikely that you'd be able to "link" code from any other compiler with PB-compiled code.
You might think about the x86 image which can easily call BIOS from the bootloader but which can't even begin to call BIOS from CE itself. The problem isn't the compiler (which is different), but the operating environment differences and assumptions.
Paul T.

How to install Adobe Hypatia Fonts in Windows 8?

I recently downloaded the Acrobat software and am entitled to a free gift after registering the product. I opted for free download of the Adobe Hypatia Font Family. However, the installation instructions did not include how to install the fonts in Windows 8. Can someone kindly guide me through the process? Many thanks.

Search Google using terms like "Windows 8 install font" and you will find several helpful results. Here's one now:
http://www.groovypost.com/howto/install-fonts-microsoft-windows-8/

Install Font in Windows 7 with MDT

I need to install company fonts in windows 7. I use MDT 2010 to install OS and my applications, this works great, but when I try to install fonts (the way I use to do for XP,...objFontsFolder.CopyHere FontName...) it just does not work. The fonts are not installed.
How can I install a font using MDT in Windows 7
Thanks
Daryl

yes create a windows and fonts folder
yes I have done it under post install
It better to store reg file in the deploymentshare because during installation it is not easy to run or access a reg file from a network share.
Chris
I made folder as suggested and copied fonts that I wanted to use with new win7 image but after I re-imaged one of out laptops I cant see that those fonts are actually copied/installed.
Let me explain in steps what I did to avoid any confusion:
1. made folder under deployment share D:\DeploymentShare\$OEM$\$1\Windows\Fonts and added 10 diff fonts
2. added new tasksequence under post install (run command line) and added line regedit /s %SCRIPTROOT%\fonts.reg
3. made fonts.reg and added it to D:\DeploymentShare\Scripts
This is how fonts.reg looks like:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Fonts]
"somefont1 (TrueType)"="somefont1.TTF"
"somefont2 (TrueType)"="somefont2.TTF"
and so on to nr 10...
What am I doing wrong ?

Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?

Hello
I'm currently developping an image processing algorithm using Labview 7.1 and the associated IMAQ Vision tools. After several tests, I found a weird result. Indeed, I put the labview algorithm - including the IMAQ VI on the library to get sure that I use all the time the same VI - on my memory stick and used it on two different computers. I tested the same picture (still in my memory stick) and had two very different results.
After several hours trying to understand why, I found that there were a difference between the results given by both computers at the very begining of the algorithm. Indeed, I used a JPEG file.
To open it, I first create an Image with IMAQ Create (U8). Then, I open it.
Then in my first sub-VI, I use IMAQ Cast Image to be sure that the picture is a U8 grayscale picture.
Right after that, I use the IMAQ Linear Averages. The results of this VI are different on the two computers.
I tried several time on the same picture : one computer always give me the same result but the two computers give me a different result. So there is no random variable on the results.
So my question is : Do IMAQ Cast Image or IMAQ Linear averages give different results when using different computers that are running under Windows XP ?
My bet is on IMAQ Cast Image but I'm not quite sure and I do not undestand why. The labview and IMAQ are the same on both computers.
The difference between the two computer are above :
Computer 1 :
Pentium(R) 4 CPU 3.20GHz with a RAM of 1Go. The processor is an Intel(R).
The OS is windows XP Pro 2002
Computer 2 :
Pentium(R) 4 CPU 2.80GHz with a RAM of 512Mo. The processor is an Intel(R).
The OS is windows XP Pro 2002.
If anybody can help me on this problem, it would be really helpful.
Regards
Florence P.

Hi,
Indeed it's a strange behaviour, could you send me your VI and your JPEG file, (or another file that reproduces) so that I could check this inthere ?
I'll then try to find out what's happening.
Regards
Richard Keromen
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Découvrez, en vidéo, les innovations technologiques réalisées en éco-conception

Fonts on windows become faded

fonts on windows menu bars and message boxes etc. become faded after opening the geforce fx 5700 window in advanced settings, after shutting down and then rebooting the fonts appear as normal, just recently installed this card with driver 5.2.1.4 on win2k prof. any advice on this much appreciated

This is common, and under several configurations I have experienced this too. It has something to do with clear type font settings in XP, native resolution on your monitor, brightness settings and refresh rates.
If the refresh rate is high and the brightness, contrast and gamma settings are too high, you will see this anomally. It's a matter of finding the sweet spot with your particular configuration.
That's about all I can say on this, I have been able to correct or minimize this but haven't come to the magic bullet as I usually try several settings in combination so it's hard to pin down.

I do I make all fonts from Windows/Fonts available to CS5 ?

It used to be that I very rarely used fonts within CS5 but recently I have. I realized that all of the fonts supposedly included with CS5 are not available via my drop down menu.
I then found these fonts in Windows/fonts so I copied all of those fonts into Program Files/Common Files/Adobe/Fonts. These unavailble fonts are now listed in that folder but are still not available via the dropdown menu in PS CS5.
I've recently read that the fonts don't really even NEED to be in the Program Files/Common Files/Adobe/Fonts folder and that PS should actually make all of the fonts in Windows/Fonts available via the dropdown menu. Yes, I have restarted PS after copying the files and also tried rebooting my PC after copying the files. The fonts are still not available via the drop down text menu within PS even though all of them are now in both locations.
Can anyone help me with this problem? Thanks!

Sometimes the font names are shown with slightly different names in windows, depending on the program.
For example, in photoshop cs5 if you scroll the font list almost to the bottom, do you see a font named Kozuka Gothic Pr6N
I believe that is the same as the KozGoPr6N font(s) listed in the windows font folder.
The different font styles (Bold, Heavy, Light etc.) are listed under the font styles drop-down just to the right of the font list in the tool options bar.
I believe the font menu in photoshop cs5 sorts/shows the fonts by script.
This script might make it easier to indentify the fonts as shown in photoshop with the names shown in the windows fonts folder.
Show Font Name.jsx
http://regex.info/blog/2007-09-26/583

Installing PS1 Fonts on Windows 7

Hello,
I use a mac at work but a Windows 7 64-bit machine at home. I'm taking some work with me and I'm looking at the font files that I'll need and I see a bunch of PostScript Type 1 files and one .scr file. I was looking up how to install PostScript Type 1 fonts on Windows 7 and read that you need both the .pfm and .pfb files, but I don't see these here. First, what is the .scr file, and second, will I still be able to download these fonts on to my PC?
Thanks in advance!
Tom

Unfortunately, the format for Type 1 files for WIndows is very different from that of MacOS.
For Windows, the font file itself has the suffix .pfb (PostScript Font Binary) and the extended font metrics file has the suffix .pfm (PostScript Font Metrics). Both must be available for the font to be installed and used under Windows. Typically, the two files would be in the same directory. You right-click the .pfm file and chose the Install font option.
The MacOS versions of Type 1 fonts cannot be used under Windows. Typically the font foundry that has supplied you with the MacOS version would also have the same fonts in the Windows format.
- Dov

Can't get fonts from windows to come up in CS4 photoshop

Hello, I have CS4 photoshop extended, and i can't get the fonts that come with Windows Vista to come up on CS4 photoshop also i have illustrator CS4 and i get the same response on the fonts over there. I tried copying the fonts from windows to the fonts folder in adobe and it just kicks it out. The fonts i am trying to load is Arial Black,Arial bold, helevitica, just to name a few, i don't want to have to pay for those fonts if i already have them. Any suggestions? Tim McCuiston

Be aware that some fonts are listed under different names in Adobe programs and that some show the main name to the left window and the variations in the right.

JDK Installation troubleshooting under Windows

When JDK 1.6 are installed under Windows,
It do not write the Path of Its compiler files
in Windows register.
And programmes like javac.exe cannot be
invoke in CMD window.
But some programme of JDK are copyed
in system32 Windows directory?!!!!
Interesting solution to invoke
java.exe and other :-)

When JDK 1.6 are installed under Windows,
It do not write the Path of Its compiler files
in Windows register.
And programmes like javac.exe cannot be
invoke in CMD window.Correct, that is by design. You must add the JDK executables to the path if you want to use the shortened command "javac".
Instruction here:
http://java.sun.com/docs/books/tutorial/essential/environment/paths.html
But some programme of JDK are copyed
in system32 Windows directory?!!!!
Interesting solution to invoke
java.exe and other :-)

No library panel option under windows menu PC signed in to cloud

I have photoshop at home and work I want to use shape captured on my ipad noticed no library panel option under windows menu.
in general Cloud, Bridge andLlibraries confuse me obviously not the same but after viewing tutorials more confused.
Damian Burns smart and stupid at the same time!

Chris and Gener7here are my system details below
Adobe Photoshop Version: 2014.2.0 20140926.r.236 2014/09/26:23:59:59 x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, AVX, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2491 MHz
Built-in memory: 8074 MB
Free memory: 5400 MB
Memory available to Photoshop: 7045 MB
Memory used by Photoshop: 60 %
3D Multitone Printing: Disabled.
Windows 2x UI: Disabled.
Highbeam: Disabled.
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
thankyou for trying to help me
Damian Burns
Sent from my iPad

What speed should I set my fans to while gaming under windows?

What speed should I set my fans to while gaming under windows?

Have you tried using the "Arial Unicode MS"? I saw that "the Arial Unicode font includes support for the Asian languages (Simplified Chinese, Traditional Chinese, Japanese and Korean) as well as for all the languages used in major commercial markets." Let me know if this works.
Regards,
Claire Reid
National Instruments

X230T graphics performance under Windows 8

My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
X320T running Windows 8 Pro x64

rsbrux wrote:
My Thinkpad originally came with Windows 7 Pro, but I have changed to Windows 8 in order to resolve problems with VSS. OOB, both Windows 7 and Windows 8 gave me a "Desktop graphics performance" rating of 5.7. Under Windows 7, upgrading to the latest Lenovo driver improved this to 6.1, leaving my HDD (at 5.9) as the limiting factor in performance. Under Windows 8, however, replacing the Windows driver with the latest Lenovo driver has reduced "Desktop graphics performance" to 5.6! What gives?
P.S. I just discovered a Power Options advanced power setting "Intel Graphics Power Plan", which was set to "Maximum Battery Life" for both battery and plugged in. I changed it to "Maximum Performance" when plugged in, but the Windows experience Index (WEI) for "Desktop graphics performance" remains a mer 5.8.
After you changed the setting to "Maximum Performance" , did you run the WEI test again?

Register font under Windows

Similar Messages

Maybe you are looking for