Register more than one recipient in SM36 Recipient Determination

Dear all
Is it possible to register more than one recipient in SM36?
I want to send the function report by backgroud job and send the report to multi-parters automatically.
Now I have to use third party mail address as a transfer and config the route in external mail exchange to carry out such case.
thanks a lot.
Slam

Hi,
You can create a distribution list in the transaction SO23...Then use that distribution list in the spool recipient..
In the distribution list you can give multiple email addresses..
Thanks,
Naren

Similar Messages

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

Attempt to register more than one resource in transaction

Hi,
What is the solution to the error message " Attempt to register more
than one resource in transaction"?
I received this error today after converting some DataSources in an
existing project to TXDataSources. The database is Oracle 8 using the
Thin drivers.
I'm certain that I've been able to have multiple resources in the same
transaction in past projects on other servers, so it must be some
server configuration issue. Thanks.
Frank

Hi Frank
Are you using an XA driver ?
sree
"Frank LaRosa" <[email protected]> wrote in message
news:[email protected]..
Hi,
What is the solution to the error message " Attempt to register more
than one resource in transaction"?
I received this error today after converting some DataSources in an
existing project to TXDataSources. The database is Oracle 8 using the
Thin drivers.
I'm certain that I've been able to have multiple resources in the same
transaction in past projects on other servers, so it must be some
server configuration issue. Thanks.
Frank

Exception MDSLockedSessionManager already registered. Can't register more than one.

I've migrated my application from 11.1.2.1 to 12.1.2 using JDev 12c.
I can deploy it to my standalone weblogic without problem.
But when I access it I get exception:
java.lang.Exception: MDSLockedSessionManager already registered. Can't register more than one.
        at oracle.adf.share.mds.MDSTransManager.registerMDSLockedSessionManagerInst(MDSTransManager.java:131)
        at oracle.adf.share.mds.MDSTransManager.registerMDSLockedSessionManager(MDSTransManager.java:123)
The stack trace starts in my custom filter:
    public void doFilter(ServletRequest request, ServletResponse response, FilterChain chain) throws IOException,ServletException {
            chain.doFilter(request, response);
What do I wrong?
Thanks,
Lukas

Check all meta data in any descriptors. I bet there is a duplicate entry in one of them (e.g. weblogic-application.xml)...
Timo

Can you register more than one PayPal Account?

Can you register more than one PayPal Account?

Hi;
You can register multiple PayPal accounts with Adobe FormsCentral. (However, you cannot register the same PayPal account in multiple Adobe FormsCentral accounts.) The most recently registered account appears in the PayPal account text box by default.
Thanks,
Josh

Can I register more than one iTunes account on my Apple TV

Hi all, am I able to set up more than one iTunes account on my Apple TV? My flatmate and I have different files on our computers, so we'd like to have both of our stuff on Apple TV. Is there a way that we can either register both of us or just switch between the users?
Thanks

Your question states that you already have an tv, so I'll restrict the answer to the current model only. You also ask if you can both have stuff ON the tv, from which I then assume you are asking if you can sync from both computers to the tv which you can't.
Only one computer can provide the primary library and sync content to an tv, you can of course set the other computer up to provide a secondary library and stream content to the tv from it when it is on with itunes running.
(Please excuse my unsupported nomenclature)

ALE distribution model - one message type to more than one recipient

Hello colleagues,
currently I'm working on an integration project between one SAP system and an e-shop system. The communication is established through IDOCs ( both inbound and outbound ). There is another system ( POS ) which is already integrated
with SAP via IDOCs also.
   Now I'm facing the following problem regarding distribution of transactional IDOCs ( orders, deliveries, etc. ): when assigning one message type ( for example DESADV - Delivery: Shipping notification ) to more than one external system in ALE distribution model I receive a message alerting that one message type can be send to only one recipient.
The distribution model is as follows:
Model Views
   SAP to POS
      SAPDEV ( the SAP system )
         POS ( the external POS system )
            DESADV
   SAP to E-SHOP
      SAPDEV ( the SAP system )
         E-SHOP ( the external e-shop system )
            DESADV
   Well, the system message is clear and I did the obvious: create a complete copy to the original message type and than assign it to the E-SHOP system ( the original message type is already used in integration between SAP and POS ).
As you can see I have found a workaround already but I think that it comes natural to SAP to communicate with other systems and to exchange same kind of documents to those systems and I can't believe that there isn't a standard solution for situation like this.
FYI I'm working on SAP ECC 6.0
Thanks in advance.
Wish you nice day and successful week ,
Vladimir

I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
Mark this post as answered so that others can find it useful.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

BB stripping recipient name/address when they are more than one in TO or CC

Have a very perplexing problem. My client cannot see more than one
recipient name and/or address at the TO and CC lines on his
blackberry, but he sees them ALL in Outlook.
I can send to his [email protected]
account, and he
sees them in Outlook AND on his Blackberry.
When I send to him on his [email protected] , he only sees 1
name and/or address at the TO and CC line on his blackberry, but sees
ALL recipients names and/or address in Outlook?
I have looked at the messages in Exchange Message Tracking and I can
see them hitting the server with the additional recipients (after the
first name) removed when the SEND TO address is
[email protected] .
On some emails, he may have been the third name in the SEND TO list,
and when he sees them on his Blackberry, it only shows the first
persons name so if it wasn't him, he doesn't even see his name listed?
There is not filter on his account and he is the only one with this
problem. He has a Blackberry Curve.
Rogers is no help....they just keep saying it's Exchange.
Any ideas?

what happens when that person does a "reply to all" from his/her blackberry device ? who are the different recipients ?
can that person send a message to several To: from his/her device ?
did you do the soft reboot or the hard reboot ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once.

I have 2 problems with Mail. I cannot address an email to more than one recipient. And I receive some emails more than once. Can you please help?

Restart your Mac. See if that makes a difference.

Unity Connection - sending email to more than one recipient

Hello.
I would like to know how can I send voicemail message via email to more than one recipient.
It works for me with one recipient (Smart Host + Accept and Relay Message in User Message Actions, but in relay address I can only use one email address).
Thanks in advance

A mailbox in Unity Connection is intended - and licensed - for a single user. It was not intended to allow for multiple receiptient distribution. If you want that functionality you could create each user a mailbox, add a distribution list with the mailboxes as members, and a call handler to address message to the DL instead of an individual mailbox the messages out.
Short of that you would need to have the SMTP smart host forward the message to multiple people (i.e. an email distribution list)
Please remember to rate helpful responses and identify helpful or correct answers.

Texting to more than one recipient?

Hi all,
Is the Palm Pre not capable of sending a text message to more than one recipient? I just tried this, and my message just disappeared after I hit "send" and never went out.
Thanks,
- Steve
Post relates to: Pre p100eww (Sprint)

Have you repeated your inability to send to multiple people, or is it possible this was a one time error where you pushed the wrong button or accidentally did a back gesture?
I frequently text to more than one recipient without issues. The only thing I can't figure out is, how to add a recipient when replying to an existing text. In other words, when I start new, I can type in the names of as many recipients as I want (typically my wife and two kids) and it works fine. But when my son sends me a text and I want to send him a reply but add my wife as a recipient, I can't do that.
Message Edited by ponyfool on 09-20-2009 12:41 AM

Error message - Cannot print to more than one recipient

Let's face it, the email addresses allocated to our printers aren't exactly memorable. My solution was to set up a Gmail account with a memorable address and use the 'Forwarding' feature to redirect eprint requests to my printer. It is not working and I get an error message saying that I cannot send a print request to more than one recipient.
The forwarding option on Gmail only has one email address in it, my eprint addy, so I'm stuck now as to what to do next.
Can anyone solve this problem please or offer another alternative solution?
Many thanks.
This question was solved.
View Solution.

I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
Mark this post as answered so that others can find it useful.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HT2731 can i have more than one apple id on a computer? As when we go away we want to facetime from our macpro to our main mac at home and both are registered under the same apple ID. Thanks

Can you have more than one apple id on a computer. We are going away and want to facetime from our macpro to the mac computer at home but both are registered under the same apple ID. What should we do ?

I will share with you what I have done to manage this with my family. While the solution isn't without flawes, it seems to do the trick. First, you need to have one person who is managing the synching of everyone's devices. In my family, I have three iphones, about to be four, and five ipads. We all synch to the same apple ID to allow one another to take seemless advantage of our Itunes, which is on our Imac. To synch individual music or video interests, we simply select which playlists we want and manually synch that way. A couple of us use imatch and the cloud to make the entire library accessable as well. With respect to the imessage, mail, contacts, etc. we each have a gmail account for our individual emails, contacts etc. So for instance, my forth grade daughter has a gmail account that we choose to synch her contacts, calendar, etc to and then that is also the account where she receives her imessages from on her ipad and itouch. My son, who has an iphone and ipad, does the same thing, but under settings, he goes to imessage and checks his phone number and his email as his preferred way to receive imessages and texts. My wife and I do the same thing. To avoid having everyone see one anothers contracts etc, we only synch contacts from our individual email accounts. Here is the downfall to this: When you update your phone or add a new device, apple always wants to reset everyone's facetime and imessage settings and then low and behold we are all receiving imessages from one another's friends etc. To work around this, I simply take each of their devices and go to their imessage settings and only check the email and phone numbers relative to their devices. I dont' know is this is the best solution, but it seems to work for us.

How do people register for more than one person on a form?

We had a lot of complaints last year from organizations who sent several employees to our training. It took a long time for them to process these one at a time. How do people register for more than one person on a form?

Hi thearcca,
This entirely depends on the form you create, you can add multiple choice button and ask for the no. of employees the organization wants to register.
Also, you can add corresponding text field for the names.
Thanks,
Vikrantt Singh

Register more than one recipient in SM36 Recipient Determination

Similar Messages

Maybe you are looking for