Register new report in GL module
Hi all
Is there some some doc where i can find the steps to register a new report in oracle apps?
I have to build a report from scratch, an i want to register it, in oracle apps in the GL module.
Thanks in advance
Soni
You can also refer to:
Note: 133991.1 - How to Register a Custom Report
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=133991.1
Note: 174198.1 - Setup & Usage (Custom Reports)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=174198.1
Similar Messages
-
Hi,
Please can you list the steps required to register a report on oracle apps. Specifically, after the program and the executable have been defined.
Many thanks
nullThe only step required to be done after defining the program is to add it to the appropriate "request group" based upon where in the system you would like the users to see the report.
Alternatively you could define a function and menu item via which the report could be accessed. -
How to register custom report under Custom Development Application
Hi 2 all
How to register custom report under the Custom Development application in R12 vision DB, and also confirm location/folder of Custom Development application in R12.
Thanks
ZulqarnainHi,
You may or may not need to "register" the workflow - it depends on the changes that you made and which Item Type you modified. Some applications are essentially hard-coded to use a specific item type and process, some hard-coded to use an item type but you can configure the process to use, and some allow you to specify which item type and which process to use.
Without knowing exactly what you have done, though, there is no specific advice that anyone can give you here on what you need to do, apart from to ensure that you have saved the new definition to the database.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com -
Error running new report in Siebel
Hi All,
I get this error when trying to run a new report in Siebel (on local web client):
We detected an Error which may have occurred for one or more of the following reasons:
BI Publisher engine failed to generate report.(SBL-RPT-50524)
I have registered the new template, added the new IO and associated the report with a view.
I get the error after clicking 'Submit'.
I'm able to run already existing reports in Siebel.
Any idea?
regards,
HakanUpdate....
This is from the logfile:
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Entering CSSXMLPAdapterSvc::CallJava...
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Getting the XMLP Class Path and loading the JAR files
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 User name : HBONDESSON
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Report Template File Path is D:\Siebel\8.1\Client_2\temp\xmlp\BIP Activity Comments Report.rtf
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 XSL File Path is D:\Siebel\8.1\Client_2\xmlp\templates\BIP Activity Comments Report.xsl
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 XML data File Path is D:\Siebel\8.1\Client_2\xmlp\data\BIP Activity Comments Report_73Z-1RX.xml
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Xliff File Path is D:\Siebel\8.1\Client_2\xmlp\xliff\enu\BIP Activity Comments Report.xlf
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Report Output Type is PDF
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Report Output File Path is D:\Siebel\8.1\Client_2\xmlp\reports\HB Activity Comments Report_73Z-1RX.PDF
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Language Code is enu
XMLPReportLog XMLPReportInfo 3 000000024afd1678:0 2009-11-13 11:49:31 Report Output File path is D:\Siebel\8.1\Client_2\xmlp\reports\HB Activity Comments Report_73Z-1RX.PDF
XMLPReportLog XMLPReportError 1 000000024afd1678:0 2009-11-13 11:49:31 Error in generating xsl file D:\Siebel\8.1\Client_2\xmlp\templates\BIP Activity Comments Report.xsl in the XMLP Engine
ObjMgrBusServiceLog Error 1 000000024afd1678:0 2009-11-13 11:49:31 (xmlpadaptersvc.cpp (518)) SBL-RPT-50524: BI Publisher engine failed to generate report.
ObjMgrBusServiceLog Error 1 000000024afd1678:0 2009-11-13 11:49:31 (xmlpdriversvc.cpp (362)) SBL-RPT-50524: BI Publisher engine failed to generate report.
The only file i have in my filesystem of the above is the Report Template File in D:\Siebel\8.1\Client_2\temp\xmlp\
All other files does not exist in my filesystem. What am I missing in my setup?
Regards,
Hakan -
At-New using ALV Function Modules
Hi,
Could anyone post how to handle control break command 'AT NEW' in ALV Reports using Function Modules.Hi Amit,
you've posted the question asked by me in another thread, Also one is related to oops and the other is related to Function modules. For my issue I have know about both of them.
Waiting for ur reply in form of solution.
Thanks,
G Sandeep Kumar. -
How to register a report program ins EBS?
HI,
I made a new report program called APVOUCHER.rdf it is developed/tested/ and running on Reports 10g windows. Then I ftp it to my EBS R12 linux server. Then I put it under the base path of $AP_TOP/reports/us.
Then I register it in EBS using this
a) Define the concurrent program executable with the Oracle Application Object Library. This links the execution file and the method used to execute it with a defined concurrent program. Log into Applications as the System Administrator and navigate to Concurrent > Program > Executable
b) Define the concurrent program with the Oracle Application Object Library along with any program parameters or any incompatibilities. Log into Applications as the System Administrator and navigate to
Concurrent > Program > Define.
But in the 2nd define the program APVOUCHER ca not me found in LOVs provided under region
Excutable
Name>
Method>
If I click LOV for Name the report name is not in there :(
Anything I miss in here?
Thanks a lotHi,
Before you define the report, navigate to Concurrent > Program > Executable and fill out the form as follows:
Executable: <REPORT SHORT NAME> --> (Similar to the report name you have uploaded but without .rdf)
Short Name: <REPORT SHORT NAME> --> (Same as above)
Application: Payables
Description: <Description>
Execution Method: Oracle Reports
For more details, please refer to:
Note: 133991.1 - How to Register a Custom Report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=133991.1
Once you are done with the above, you need to add this concurrent program to the Request Group which is attached to your responsibility.
- Login to System Administrator responsibility
- Navigate to Security > Responsibility > Define
- Query the Responsibility Name
- Write down the Request Group
- Navigate to Security > Responsibility > Request
- Query the Request Group
- Add the concurrent program
You should be able to see the concurrent program from the responsibility then.
Regards,
Hussein -
Example of a Simple ALV Report using Function Modules (not OO)
Hi,
I am new to ABAP. Where can I get a proper Example of a Simple ALV Report using Function Modules? I searched the forum but did not find a proper solution. Kindly help.
Smruthi.
Edited by: Smruthi Acharya on Jan 29, 2009 7:13 PMHi,
Use this demo code:-
REPORT z_alv01 MESSAGE-ID zmsg.
* TABLES
TABLES : ekpo.
* TYPE POOLS
TYPE-POOLS : slis.
* TYPE DECLARATION
TYPES : BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
matnr TYPE ekpo-matnr,
werks TYPE ekpo-werks,
menge TYPE ekpo-menge,
END OF t_ekpo.
* PARAMETERS
PARAMETERS : s_var TYPE disvariant-variant.
* DATA DECLARATION
*VARIABLES
DATA : check(1),
rep_id TYPE sy-repid.
*INTERNAL TABLE TYPE OF ZEKPO
DATA : it_ekpo TYPE STANDARD TABLE OF t_ekpo WITH HEADER LINE.
*FIELD CATALOG
DATA : it_field TYPE slis_t_fieldcat_alv,
wa_field TYPE slis_fieldcat_alv.
*SORTING
DATA : it_sort TYPE slis_t_sortinfo_alv,
wa_sort TYPE slis_sortinfo_alv.
*FOR TOP OF THE PAGE
DATA : it_top TYPE slis_t_listheader,
wa_top TYPE slis_listheader.
*FOR END OF THE PAGE
DATA : it_end TYPE slis_t_listheader,
wa_end TYPE slis_listheader.
*TO CAPTURE EVENTS AND HANDLE
DATA : it_event TYPE slis_t_event,
wa_event TYPE slis_alv_event.
*FOR GRID TITLE
DATA : wa_title TYPE lvc_title.
*FOR LAYOUT
DATA : wa_layout TYPE slis_layout_alv.
*FOR EXCLUDING STANDARD BUTTON FROM ALV TOOLBAR
DATA : it_exclude TYPE slis_t_extab,
wa_exclude TYPE slis_extab.
*FOR VARIANT
DATA : wa_variant TYPE disvariant.
* INITIALIZATION
INITIALIZATION.
check = 'X'.
rep_id = sy-repid.
wa_variant-report = sy-repid.
*GET DEFUALT ON THE SELECTION SCREEN FOR DEFAULT DISPLAY
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc = 0. " IF DEFAULT VARIANT FOUND
s_var = wa_variant-variant. " PASS THE DEFAULT VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN ON VALUE REQUEST
* TO GET THE F4 HELP FOR VARIANT
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = wa_variant
* I_TABNAME_HEADER =
* I_TABNAME_ITEM =
* IT_DEFAULT_FIELDCAT =
i_save = 'A'
* I_DISPLAY_VIA_GRID = ' '
IMPORTING
* E_EXIT =
es_variant = wa_variant
EXCEPTIONS
not_found = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
s_var = wa_variant-variant. " PASS THE SELECTED VARIANT TO THE SELECTION SCREEN FIELD
ENDIF.
* AT-SELECTION SCREEN
* TO CHECK THE EXISTENCE FOR VARIANT
AT SELECTION-SCREEN.
wa_variant-variant = s_var.
CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
EXPORTING
i_save = 'A'
CHANGING
cs_variant = wa_variant
EXCEPTIONS
wrong_input = 1
not_found = 2
program_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE w001.
ENDIF.
* START OF SELECTION
START-OF-SELECTION.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo
INTO TABLE it_ekpo.
* FIELD CATALOG
wa_field-fieldname = 'EBELN'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'PO #'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'EBELP'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Line Item'.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MATNR'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 15.
wa_field-seltext_l = 'Material'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'WERKS'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 6.
wa_field-seltext_l = 'Plant'.
* wa_field-input = check.
* wa_field-edit = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
wa_field-fieldname = 'MENGE'.
wa_field-tabname = 'IT_TAB'.
wa_field-outputlen = 10.
wa_field-seltext_l = 'Qty.'.
* wa_field-input = check.
* wa_field-edit = check.
wa_field-do_sum = check.
APPEND wa_field TO it_field.
CLEAR wa_field.
* SORT W.R.T. PURCHASE ORDER NUMBER
wa_sort-spos = 1.
wa_sort-fieldname = 'EBELN'.
wa_sort-tabname = 'IT_EKPO'.
wa_sort-up = check.
wa_sort-subtot = check.
APPEND wa_sort TO it_sort.
CLEAR wa_sort.
* FOR GRID TITLE
wa_title = 'Hello'.
* FOR LAYOUT
wa_layout-zebra = check.
* FOR EXCLUDING STANDARD BUTTONS FROM ALV TOOLBAR
wa_exclude-fcode = '&OUP'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&ODN'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
wa_exclude-fcode = '&OAD'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* wa_exclude-fcode = '&AVE'.
* APPEND wa_exclude TO it_exclude.
* CLEAR wa_exclude.
wa_exclude-fcode = '&INFO'.
APPEND wa_exclude TO it_exclude.
CLEAR wa_exclude.
* POPULATE ALL EVENTS INTO INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_event
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE it_event INTO wa_event WITH KEY name = 'END_OF_LIST'.
wa_event-form = 'END'.
MODIFY it_event FROM wa_event INDEX sy-tabix.
CLEAR wa_event.
* DISPLAY RECORDS IN ALV GRID
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = rep_id
* i_callback_pf_status_set = 'PF'
i_callback_user_command = 'COMMAND'
i_callback_top_of_page = 'TOP'
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
i_grid_title = wa_title
* I_GRID_SETTINGS =
is_layout = wa_layout
it_fieldcat = it_field
it_excluding = it_exclude
* IT_SPECIAL_GROUPS =
it_sort = it_sort
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
i_save = 'A'
is_variant = wa_variant
it_events = it_event
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_ekpo
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form top
* TO WRITE THE HEADER
FORM top.
REFRESH it_top.
wa_top-typ = 'S'.
wa_top-key = text-001.
wa_top-info = rep_id.
APPEND wa_top TO it_top.
CLEAR wa_top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_top
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "top
*& Form end
* TO WRITE THE FOOTER
FORM end.
REFRESH it_end.
wa_end-typ = 'S'.
wa_end-key = text-001.
wa_end-info = rep_id.
APPEND wa_end TO it_end.
CLEAR wa_end.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = it_end
* I_LOGO =
* I_END_OF_LIST_GRID =
* I_ALV_FORM =
ENDFORM. "end
*& Form pf
* FOR PF-STATUS WITH USER DEFINED BUTTONS
* -->RT_EXTAB text
FORM pf USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZTG_PF_ALV'.
ENDFORM. "pf
*& Form command
* TO HANDLE USER ACTIONS AGAINST PF-STATUS
* -->UCOMM text
* -->SELFIELD text
FORM command USING ucomm LIKE sy-ucomm selfield TYPE slis_selfield.
DATA : ok_code TYPE sy-ucomm.
ok_code = ucomm.
CASE ok_code.
WHEN 'T_DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL DOWN'.
WHEN 'DOWN'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'DOWN'.
WHEN 'UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'UP'.
WHEN 'T_UP'.
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = 'HELLO'
txt1 = 'USER COMMAND'
txt2 = 'TOTAL UP'.
ENDCASE.
ENDFORM. "command
Hope this helps you.
Thanks & Regards,
Tarun Gambhir -
Crystal Reports 2008 Merge Modules SP1 Fails when installing Wise 7.0
Hello all,
We are packaging our software solution .NET 2.0 Visual Studio 2008, with Wise Studio 7.0 using Crystal Reports 2008 Merge Modules (SP1). (We use CR2008 for reporting)
There is a point (fix service) in the installation when an error message appears saying, " cannot register Businessobjects.enterprise.sdk cannot be register because of dependencies.
We have tried installing in a XP, a Windows 2003 Server, and Vista. The three of them with the same error.
Any ideas???
Thank in advance.
Adrián.-I believe this thread will help:
warnings on build with CRRunTime_12_1.msm
Ludek -
Crystal Reports XI Merge Module Error
Hi,
I am attempting to create an installer that uses the latest (CRXIWIN_SP4) Crystal Reports XI merge module (CrystalReports11_RDC_Reportengine.msm).
When the installer is run an error often occurs (it only occurs on some machines and I have so far be unable to find a pattern as to which machines it fails on):
Error 1904.Module C:|Program Files\Busines Objects\BusinessObjects Entrprise 11\win32_x86\plugins\auth\secLDAP\secldap.dll failed to register. HRESULT -2147024770.
The dll in question (secldap.dll) is present on the machine at the point where the error occurs, but further inspection seems to indicate that a dependency is missing (though it's not clear what dependency).
The readme file supplied with the merge modules would seem to suggest that this is a defect in the merge module that has been fixed (ADAPT00409449).
Any help to sort this out would be much appreciated as I've run out of ideas!
Many thanks,
Simon Clarke.Please post this query to the Legacy Application Development SDKs forum:
SAP Crystal Reports - Legacy SDKs
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek -
CRVS2010 - Error adding New Report
I just downloaded the Crystal Reports Beta for Visual Studio 2010. I added a Crystal Report Viewer to a form with no problems. When I try and create a new report I get the following error:
"An error occurred while adding a Strongly- Typed ReportDocument. The report may be corrupt or invalid."
It will go ahead a create a report in solution explorer, but when I try and open it I get the following error:
"The operation could not be completed. Class not registered"
Help please.
Thanks.See this thread
[Crystal Reports for Visual Studio 2010 Beta 2 and Runtimes Now Available|Crystal Reports for Visual Studio 2010 Beta 2 and Runtimes Now Available]
Bhushan. -
i have installed oracle financials on windows XP jst for learning purpose i am new to oracle financials RDBMS : 9.2.0.6.0
Oracle Applications : 11.5.10.2
i want to register a report now i have created first the executable for that report then in programms i have defined it in payables responsibility but even now i cant see that anything missing plzz help mee
ThanksHi mushy,
The documentation for Oracle Applications 11i can be downloaded at http://www.oracle.com/technology/documentation/applications.html
Check the Excel shet of what file represents the AP, AR, GL..
Regards,
Kiran -
Pricing simultion in a new report
Hi Experts
I need to create a new report in which the input would be Sold to party & material. The output should be the net price of the material after applying all the aplicable pricing condition. The output should match the net value of that order if I a creating the sales order.
In simple words I wish to develop a price simulation report to have pricing information for materials without creating the sales order & the Net value should be similar as if I am creatin the sales order for one quantity.
I tried few Functional module but all eforts gone in vain.
Your hel is appreciatedHi
I think that you can try it with BAPI_SALESORDER_SIMULATE. So search posts in SDN for the string 'BAPI_SALESORDER_SIMULATE'.
Regards
Eduardo -
Taking old report even new report is uploaded on web - Cache problem?
Hello,
I have a problem. We are using remote server for development work.
We are working on web environment. The modules (forms & reports) will be uploaded to the unix server using web compilation links. Now I haveI uploaded (generate), a report (old) to the server. After some modifications new report is uploaded . When I run the report, it is always taking old one, instead of new.
Time stamp in the server is showing new one is uploaded.
I heard this could be because of cache problem on the server. If some one have faced the same , please let me know the solution for this?
Cheers
Ram KanalaFRM-40738 (repid is coming out null)
Looks like here it is not able to find the report
repid := find_report_object('ETOX_9ITEST');
In Forms builder confirm that you have defined a report by this name for the particular form (adding the report in REPORTS_PATH would not suffice). I think it should also point to corresponding report.
Please post the exact error messages as you see it with the error numbers.
Other comments.
2) Added a TNS_ADMIN in the registry to point to TNSNAMES.ORA in the apps directory. This Tnsnames.ora has an entry for report server name. The report server is up when seen in OEM console. But my report does not launch. <<For 9i you do not need to do this . This alias defining is for 6i. In 9i it is "auto discovery" in the subnet.
You can remove this. (You need Tnsnames.ora for DB aliases, I am talking about reports server...)
3) Same comment as above
8)Verify the Reports 9i Service properties and check the "Log On as" information. Be sure to specify on "This account" the user information with which the installation was made.
For Windows/2000:
- Start-> Settings-> Control Panel-> Administrative Tools-> Services
- Double click on the Reports Server
- Go to "Log On" tab
- Change on the "Log On As" section to "This account" and enter the userid/password of the
user that installed Reports Server
- Ensure that the user account where the Reports Server is installed has administrator privileges
and a default printer.
- Restart the Reports Server as the new user.
(For WinNT steps will be similar)
---Workaround till your issue is solved is ....
Start report server as a standalone server
rwserver server=server_name
Thanks
Ratheesh -
Report Generation: New Report.vi
Running applicaion in development mode works fine.
After compiling however I get Error 7: Open VI Reference in New Report.vi
Why am I getting this error?Has the version of Office on your machine changed since you installed the Report Generation Toolkit? The VIs will become broken if the ActiveX interface changes, and this can happen when the Office version changes. I recommend uninstalling and reinstalling the toolkit. Also, what version of Report Generation Toolkit are you using? The latest version is 1.1.1.
-D
P.S. - I'm going to respond to your other thread that you started with a link to this one. Instead of creating multiple messages on the same question, just wait for a response to your initial thread.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
Error 7 occurred at open vi reference in New Report.VI
Hello!
I use the report generation toolkit on LabView 7.0 to create a report in Excel. The program works fine until I make an executable version. I the get the error:
Error 7 occurred at open vi reference in New Report.VI
I use the New Report.VI, Bring Excel to front.VI and Save Report To File.vi
Can you pleace help me!!!Most likely, you did not include the required libraries in your build script. When building an executable in which you use the Report Generation Toolkit, you must include the _Word Dynamic VIs.vi from _wordsub.llb and _Excel Dynamic VIs.vi from _exclsub.llb as dynamic VIs on the Source Files tab.
Check this article for more info.
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/86256a47004e16d186256a84004cb883?OpenDocument
Daniel L. Press
PrimeTest Corp.
www.primetest.com
Maybe you are looking for
-
The only recent changes to the PC are: Ran latest Microsoft updates. Installed Halo2, F1 and TinTin games (all purchased from store, installed off original CD) Installed DirectX Installed Microsoft Games for Windows Live and reditributable Installed
-
I get e mail with hyperlinks that have sound but all I can get is the video and no sound. Example newsmax.com sends e mail alerts with hyper links to topics of interest. When I click on the link it takes me to the video but no sound. Control panel sh
-
Hello all, I'd like to receive some hints about how to parallelize the code below that Thread Analyser has detected races for static variables: #pragma omp parallel for private(i) for (i=0; i<n; i++){ x = calc(a); int calc(int a){ static int x,y,z=0;
-
Disk Utility - repeated need for minor header volume repair...
Hi... Three times in the last week and a half, Disk Utility has reported "Volume header needs minor repair". Each time, I've dutifully started up from my Tiger install CD, and successfully repaired the problem. On at least one of the three occasions,
-
Possible to edit multiple photos in one file?
I thought it was. I have opened an image and I have placed another image in another layer. I am trying to cut out a section of the placed image but it's placed it as a smart object (not sure what that is) but it's saying smart objects are not direct