Taking old report even new report is uploaded on web - Cache problem?

Hello,
I have a problem. We are using remote server for development work.
We are working on web environment. The modules (forms & reports) will be uploaded to the unix server using web compilation links. Now I haveI uploaded (generate), a report (old) to the server. After some modifications new report is uploaded . When I run the report, it is always taking old one, instead of new.
Time stamp in the server is showing new one is uploaded.
I heard this could be because of cache problem on the server. If some one have faced the same , please let me know the solution for this?
Cheers
Ram Kanala

FRM-40738 (repid is coming out null)
Looks like here it is not able to find the report
repid := find_report_object('ETOX_9ITEST');
In Forms builder confirm that you have defined a report by this name for the particular form (adding the report in REPORTS_PATH would not suffice). I think it should also point to corresponding report.
Please post the exact error messages as you see it with the error numbers.
Other comments.
2) Added a TNS_ADMIN in the registry to point to TNSNAMES.ORA in the apps directory. This Tnsnames.ora has an entry for report server name. The report server is up when seen in OEM console. But my report does not launch. <<For 9i you do not need to do this . This alias defining is for 6i. In 9i it is "auto discovery" in the subnet.
You can remove this. (You need Tnsnames.ora for DB aliases, I am talking about reports server...)
3) Same comment as above
8)Verify the Reports 9i Service properties and check the "Log On as" information. Be sure to specify on "This account" the user information with which the installation was made.
For Windows/2000:
- Start-> Settings-> Control Panel-> Administrative Tools-> Services
- Double click on the Reports Server
- Go to "Log On" tab
- Change on the "Log On As" section to "This account" and enter the userid/password of the
user that installed Reports Server
- Ensure that the user account where the Reports Server is installed has administrator privileges
and a default printer.
- Restart the Reports Server as the new user.
(For WinNT steps will be similar)
---Workaround till your issue is solved is ....
Start report server as a standalone server
rwserver server=server_name
Thanks
Ratheesh

Similar Messages

Report Generation: New Report.vi

Running applicaion in development mode works fine.
After compiling however I get Error 7: Open VI Reference in New Report.vi
Why am I getting this error?

Has the version of Office on your machine changed since you installed the Report Generation Toolkit? The VIs will become broken if the ActiveX interface changes, and this can happen when the Office version changes. I recommend uninstalling and reinstalling the toolkit. Also, what version of Report Generation Toolkit are you using? The latest version is 1.1.1.
-D
P.S. - I'm going to respond to your other thread that you started with a link to this one. Instead of creating multiple messages on the same question, just wait for a response to your initial thread.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

SCSM 2012 Moving Reporting to new Reporting Server

is there any step by step procedure to move the scsm reporting to a new report server?
Georges Mouawad
Jreij12

Hi,
this link shows how to update the connection strings of the DataSources on the report server.
I did the migrating of the report server from a server to another.
I'll write a step by step procedure as soon as possible.
Anyway thank you Roman
My Best Regards
Jreij12

Copying Report Painter report to new report

Hi all,
We are having a report painter program. I have to enhance that report. I want to add one more output column to that report.
So, I'm trying to copy the existing one and trying to make changes. I'm new to this report painter concept.
Can anybody let me know how to Insert a new filed and where to change the logic to retrieve the data for this new field.
Thanks in advance

hi,
you will have to debug the code.
and then find the appropriate place where you can code acc to your requirement.

ARD Task Server gathering reports even when reporting is disabled

We have noticed lately that at 2am each morning there is a considerable amount of network usage initiated by my task server presumably gathering reports from machines at different sites.
I had recently deleted all my computers in ARD, disabled reporting, and added them back in while making sure not to apply reporting features.
I have dug around in cron, LaunchDaemons, and plist files on the clients and on my task server. On my task server I see a plist that shows reporting is disabled on all the machines. At the client level I do not see anything regarding reporting.
Would it be a good idea to re-send an ard configuration package to all of the clients?
I opened a ticket with Apple, but they won't do anything without having purchased software support.

Hmmm... I seem to have found the plist file that is doing it. I was looking at /Library/Application\ Support/Apple/Remote\ Desktop/ before... looks like /Library/Preferences/com.apple.ARDAgent.plist is the culprit.
This plist is a binary, so I had to use plutil to convert to xml in order to make it human readable. I wonder if I can just hack this file up a bit and re-deploy it to each machine. Or I wonder if it would re-build if I simply remove it from each client. I will need to test to find out, seeing as though the task servers are listed in it, probably not a good idea to remove it all the way.

Mail using old instead of new X.509 certificate, two certs causes problems

I have two X.509 Thawte certificates on my key chain. One expires in 2008, the other expires later in 2007. The 2008 certificate has an additional email address embedded over the 3 in the 2007 certificate.
When I send signed email the old certificate is getting sent instead of the new. If I look at my email entries in ADDRESS BOOK, the old certificate shows except the new email address that is unique to the 2008 certificate.
I exported the 2007 certificate, deleted the 2007 certificate and closed and opened KeyChain Utility and now the 2008, which is the expected certificate shows for all email addresses. Problem is that I can't read any old email that was encrypted with the 2007 certificate unless I import the old certificate.
Anyone know how to have both certificates on your key chain and have OS X default to the latest certificate for sending email, but use the correct certificate for reading all email when mail has been encrypted with one of several certificates over time?
Importing and exporting, deleting certificates as you update certificate is a real pain.

I'm having a similar problem. Also have thawte certificates. I renewed the one about to expire which seems to have worked. I deleted the old one; wrong move, as I now could not read the email that used the old one. I fetched the old certificate, which appears in Certificates, but the email still seems to not be decryptable. There seems to be no way to get it into the My Certificates place. I have used these for several years with no problems until now.
If anybody has a clue on how to read the old email, I would love to hear it.

Can i open a existing report using a report generation toolkit

Hello All,
Suppose I create a new excel report today and close the program, Tomorrow I open the same program and instead of creating a new excel file, i need to update the test results data into the excel file which was created yesterday, is this possible.
I am confused because there is no option called Open report in report generation toolkit, it just has create new report option.
Probably NI Guys can work on this...sorry if it is a;lready existing?
Is there any method to open a existing report?
Pls help.....
Thanks
Solved!
Go to Solution.

Hi,
I have a similar problem. I'd like to use Report Generation Toolkit to enter data into some cells in the active worksheet of the active workbook but it seems impossible?! The user has in beforehand opened the desireed workbook and activated the desired worksheet. I use the 'New Report' VI with the template input set as the path of the active workbook (some self-made ActiveX calls to get the path). When this VI is run, howevere, the excel file is sort of re-opened and another worksheet becomes the active one.
I tried to make a customized copy of New Report.vi, New Report subVI.vi and Excel_Open_Workbook.vi so that the Report object works with the currently active workbook and worksheet, but I failed due to my lack of knowledge in LV classes and such things. It would've been an ugly solution anyway to have custom low-level VIs that does not follow when the RepGen Toolkit develops in the future.
Best regards,
Andreas Nilsson

I have version 8 it wanted me to update the inspiration browser ... uninstalled old version but new

I have version 8 it wanted me to update the inspiration browser ... uninstalled old version but new would not upload and now I can not do pdf... HELP please.

now I can not do pdf.
What exactly do you mean by this? You can't open a PDF file? You can't find a PDF tutorial?

Report for MM for seeing the material old price and new price

Hello friends,
For the ROH material we are maintained the Moving average price. So that material is calculated the average price of that material,
Know My clint wants old price of that material i.e. one year before And
he wants comparison report for old price and new price of the all raw materials
is there any reports are there such kind.
Regards
Pramod

Hi Pramod,
If you want to view the old and new prices on a frequent basis, u can go for an
ABAP query (SQVI) with the base table as MBEW.
Cheers
Arun.

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Hello! I lost my iphone like a month ago, well I reported that phone as lost with my icloud account, now I got a new iphone and I would like to know if I can use that same icloud account with this new phone? The old one will stay reported?

Thank you. The old one will stay reported?

Activity Universe + Audit / Creating a new report

Hello.
We are using the audit & Activity universe reports, but some user have asked to make a new report that is not in the packaged reports in the Audit folder.
He needs for all exisitng reports :
- report name
- date of the last refresh
- author of the last refresh
- and if possible ... the folder where is the report
They asked me too a list of all Users with their "Groups" related ...
is it possible to have report on the CMC datas ?
We are on BO XI R2 - ServicePack 5 - FixPack 5.6
Thank you very much

Hi !
Thanks to everyone who answered to my question, I was able make something now.
I have one more problem with my query on the Activity universe : I always have the old reports (deleted or moved into another folder), even with the condition even_type_id = 65543 = "Object deleted" !
Here my query on BO :
SELECT DERIVED_DOCUMENT_NAME.Detail_Text, AUDIT_EVENT.User_Name, max(trunc(AUDIT_EVENT.Start_Timestamp)), TO_CHAR(TRIM(AUDIT_DETAIL.Detail_Text))
FROM (select AUDIT_EVENT.Server_CUID, AUDIT_EVENT.Event_ID, RTRIM(TO_CHAR(AUDIT_DETAIL.Detail_Text), CHR(0)) as Detail_Text
        from AUDIT_EVENT, AUDIT_DETAIL
        where (AUDIT_EVENT.Server_CUID = AUDIT_DETAIL.Server_CUID)
        and (AUDIT_EVENT.Event_ID = AUDIT_DETAIL.Event_ID)
        and (AUDIT_DETAIL.Detail_Type_ID = 8)
     ) DERIVED_DOCUMENT_NAME, AUDIT_EVENT, AUDIT_DETAIL
WHERE ( AUDIT_DETAIL.Event_ID=AUDIT_EVENT.Event_ID and AUDIT_DETAIL.Server_CUID=AUDIT_EVENT.Server_CUID )
AND ( AUDIT_EVENT.Event_ID=DERIVED_DOCUMENT_NAME.Event_ID and AUDIT_EVENT.Server_CUID=DERIVED_DOCUMENT_NAME.Server_CUID )
AND ( AUDIT_EVENT.Event_Type_ID = 19     /* Document refreshed */ )
AND ( AUDIT_DETAIL.Detail_Type_ID = 43 ) /* Object Folder Path */
AND (AUDIT_EVENT.Event_Type_ID <> 65543 ) /* Object deleted */
GROUP BY DERIVED_DOCUMENT_NAME.Detail_Text, AUDIT_EVENT.User_Name, TO_CHAR(TRIM(AUDIT_DETAIL.Detail_Text))
someone have an idea ?
maybe it's a parameter ?
Thanks again.

Software Update Server, clients report "no new software available"

I have been running Software Update Service on my 10.5.8 (9L30) Xserve for a short time without any problems, updating about twenty 10.5.8 clients on the local network.
Recently the clients started reporting "no new software available" when running software update (GUI or command line), but updates were available on the Xserve:
# defaults write com.apple.SoftwareUpdate CatalogURL http://myserve.mydomain:8088/
# defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL http://myserve.mydomain:8088/
# softwareupdate --list
Software Update Tool
Copyright 2002-2007 Apple
No new software available.
When pointing the clients back to apple for updates, the update is available:
# defaults delete /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
# softwareupdate --list
Software Update Tool
Copyright 2002-2007 Apple
Software Update found the following new or updated software:
* iTunesX-9.0.1
iTunes (9.0.1), 87690K [recommended]
Clients can connect to port 8080 on the server, and the iTunes update has been downloaded to the server and is visible on the file system:
# "curl -s http://myserve.mydomain:8088/index.sucatalog iTunesX.tar
http://myserve:8088/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV6mR dq6RnVY/iTunesX.tar"
# ls -l /usr/share/swupd/html/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV 6mRdq6RnVY/iTunesX.tar
-rw-r--r-- 1 root wheel 54947840 Sep 22 16:20 /usr/share/swupd/html/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV 6mRdq6RnVY/iTunesX.tar
The /var/root/Library/Caches/com.apple.SoftwareUpdate/Cache.db is extremely sparse after running the software update against the local Xserve:
# rm /var/root/Library/Caches/com.apple.SoftwareUpdate/Cache.db
# softwareupdate --list
# strings /var/root/Library/Caches/com.apple.SoftwareUpdate/Cache.db | tail
SQLite format 3
indexprotoprops_indexcfurl_cache_blobdata
CREATE INDEX protopropsindex ON cfurlcache_blob_data(entryID)P
Ytablesqlitesequencesqlitesequence
CREATE TABLE sqlite_sequence(name,seq)
[tablecfurlcache_blob_datacfurl_cache_blobdata
CREATE TABLE cfurlcache_blob_data(entryID INTEGER PRIMARY KEY, response_object BLOB, request_object BLOB,
receiver_data BLOB, proto_props BLOB, user_info BLOB)u
indexrequestkey_indexcfurl_cacheresponse
CREATE INDEX requestkeyindex ON cfurlcache_response(requestkey)r
indextimestamp_indexcfurl_cacheresponse
CREATE INDEX timestampindex ON cfurlcache_response(timestamp)
tablecfurlcache_schema_versioncfurl_cache_schemaversion
CREATE TABLE cfurlcache_schema_version(schemaversion INTEGER)
Wtablecfurlcache_responsecfurl_cacheresponse
CREATE TABLE cfurlcache_response(entryID INTEGER PRIMARY KEY AUTOINCREMENT UNIQUE,
version INTEGER, hash_value INTEGER, storage_policy INTEGER, request_key TEXT UNIQUE,
time_stamp NOT NULL DEFAULT CURRENT_TIMESTAMP)G
indexsqliteautoindex_cfurl_cache_response_1cfurl_cacheresponse
indexsqliteautoindex_cfurl_cache_response_2cfurl_cacheresponse
None of the XML data seen in the Cache.db file after running against Apple's update server is present.
Note, I did multi-home this server fairly recently to add an internal website on a different IP/URL, but I don't think that should have effected the SUS service, which is still available at the original IP/port. I am a Unix/Linux admin by training, so some of the OS X idiosyncrasies are still new to me, and I may not be aware of certain tools/commands that may be helpful in diagnosing this problem.
Thanks for your help in advance,
-Tom

Apologies for responding to my own post, but I believe I have found the issue and am replying with a solution for the benefit of others.
Upon reviewing my original post, I noticed that the curl request for the index.sucatalog was returning XML contents with URLs defined with only the hostname, not the FQDN, even though the CatalogURL was specified with a FQDN.
# curl -s http://myhostname.mydomain:8088/index.sucatalog | grep iTunesX.tar
<string>http://myhostname:8088/content/downloads/05/47/061-7190/xP7dtwZz6YGXLHFHcxVT7CnV 6mRdq6RnVY/iTunesX.tar</string>
This change in URL may have arisen when multi-homing my Xserve for some reason. In my case, specifying the search domain field on the clients seems to have fixed the problem as the simple hostname in the URLs are now able to resolve without the domain.

LV 8 problem with New Report.vi in compiled program

I'm a novice LV programmer trying to finish my first project. The project is the automation of an air flow stand using field point for acquisition/control. Have the code written and everything seems to work fine until I compile. Specifically, I get an error when I attempt to open an Excel template (XLT) using the New Report.vi included in the report generation add on. When the compiled executable run I get a message with the header "Error 7 occured at Open VI reference in New Report vi>report2.vi>auto air flow testing.vi . And then in the body of the message is says:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux.
NI-488: Non-existent board.
VI Path: C:\builds\auto air flow\My Application\auto air flow 1a.exe\Excel_Open.vi
Built Application or Shared Library (DLL): Make sure all dynamically loaded VIs were properly included in the build specification for the application or shared libr
The input to the New Report.vi template connector is C:\Air Flow Data Files\templates\psc.xlt. Again this works in design so I believe the formatting is correct and the file does exist.
Why would this work in design environment but not the compiled program? I recompiled several times and even tried reinstalling the report generation tool kit. Any help or pointers would be greatly appreciated. I will be happy to supply more info if necessary. thanks.

Okay, I found the solution by doing a search here on 'Error 7". My thanks to those who have posted the solution in the past. Regards

No Program generated after creation of new report via Report Painter

Hello,
I have created a new report after copying an existing report from report painter GRR1. The new report has also been assigned to a new Report Group relevant to the same library.
There is no Syntax error. The only change has been to the Title of the report.
However when I am trying to execute the report nothing happens. ABAP found that no program has been generated by SAP for this mew rpeort. We confirmed this by searching with my user ID in table TRDIR.
However there is no trace of it.
We have tried to execute the report from GRR3 & GR53 (report group). The report & report group is having the same attributes as the old one.
Unless the report is in executable stage we are not able to go to the Selection screen & finally from the Technical Information to the program name.
Please could you let me know what can be the possible cause for this & how can we resolve the same.
Thanks & Regards
Shreenath

@JoeSchmoe115: Thanks for your suggestion. Using a web service or WCF service would still mean dealing with potential timeouts for very large reports (granted you can adjust those timeouts).
I think an approach using a console app could work, but rather than having the web app spawn it, an alternative would be to do the following: (1) have the web app insert report generation requests (including all necessary report parameters) into
a database table, and (2) have a console app, periodically invoked by Windows Task Scheduler, which reads that database table and then uses the SSRS API as you describe to generate the report, save the byte stream to a file, and finally send
the e-mail notification to the user.
mkedwards
What you've described will work but saving report generation requests in separate table may not be necessary. I don't have much experience with web services but can they just spawn C# console app with needed parameters and exit without waiting for console
app to complete?
The positive side of using database to store report generation requests is that you would have complete log of all requests. Your console app can then update database with completion status.

I need to add a new report to the application that is done using visual studio and SSRS and SQL Server 2008

I have an application that is done using SSRS on visual studio and it connects to the report server on SQL server 2008 environment.
I've been changing the existing reports using visual studio 2008 and modifying the reports on the report server. How do I add a new report to the application ? I created a new report and deployed it on the report server but it didn't show up in the application.
I can access the application source code on visual studio 2010 and TFS (Team Foundation). Thanks.

Hi,
I have a question. This application retrieves SSRS reports from the report sever. When I download the reports
from the SQL Server I can open them in visual studio 2008 but they don't open in visual studio 2010. I can access the application files on visual studio 2010 and team foundation server 2010. I was unable to open team foundation server 2008 on visual studio
2008. The issue is that I am unable to add a report with a new name to the application. I use visual studio 2008 to deploy the reports on the report server but it has to be the same name to be able to run the report from the application. I can deploy any report
on the report server but I can't access it from the application unless it has to be the same name as the present reports. If I keep the report the same name then it will replace the old report and the new report will run from the application. But only if it's
the same name. I guess when I add a new report to the application with a new name I am supposed to add a definition in the application C sharp files on visual studio 2010 so that the new report will show in the application. What's your opinion
? I have attached 2 images of the application and team foundation server 2010 and the report server.
Thanks.

Taking old report even new report is uploaded on web - Cache problem?

Similar Messages

Maybe you are looking for