Registration and activation via ntlm proxy
used to be able to do this by bypassing NTLM authentication on a proxy for adobe.com, adobeconnect.com & adobelogin.com. It no longer works. Any idea what else needs to be bypassed?
Please refer the article: Creative Cloud Help | About Creative Cloud Packager.
Regards,
Romit Sinha
Similar Messages
-
Registration and Activation Script in PHP
Hi,
I am creating an registration application. Prior to a
successful registration, users must first activate their account
from the provided email address in order to validate the provided
email addresses. This application is powered by PHP script. Hoping
someone could provide some concept about how this could be done and
some tutorials will be appreciated. Thank you.
Regards,
Edwin.oO(edwin@aw)
> I am creating an registration application. Prior to a
successful registration,
>users must first activate their account from the provided
email address in
>order to validate the provided email addresses. This
application is powered by
>PHP script. Hoping someone could provide some concept
about how this could be
>done and some tutorials will be appreciated. Thank you.
I can't provide code, just the idea how this is usually
accomplished:
When the users registers or creates the account, a kind of a
key is
generated. This can be a random string for example or an MD5
checksum of
the user name or something like that, let's take "crztgvhbjn"
as an
example. This key is stored in the database along with the
user data and
send to the user's email. In order to activate the account,
the user has
to follow a particular link, which contains the key, e.g.
http://example.com/account/activate?key=crztgvhbjn
or (nicer URL)
http://example.com/account/activate/crztgvhbjn
Whatever. Then the script just has to check that the
submitted key is
valid and activate the account.
Micha -
WRT160N and internet via a Proxy server
Hi all,
i connect to the internet using a proxy server. i can connect to the internet if i specify the proxy server address directly in my internet explorer and set my router to auto config for intenet. BUT if i toggle on the proxy server in my IE, i cant access the router's web based setup until i toggle it off. once i toggle off the proxy server, i cant access the internet.
does anybody know what i'm missing.Check the network connection window ..... if any Dial Up adapter ...or PPPOE adapter or Proxy Server adapter is installed or not ...
If so disable it or click cancel as default .....
Then check if you are able to go online with LAN connection or not .... -
had to buy a new laptop and am trying to install XI (current and active licensee)....registration setup screen indicates ("Invalid Serial Number")? Account is active.
Is it by any chance asking for a "qualifying serial number"?
-
I have an old Mac G5 with OSX 10.5.8
After a crash of my HD, I reinstalled the CS3.
At the time of recording I get a window with the message "COMPLETED REGISTRATION" and under "There was a problem sending the informasioni via internet" and still under three choices to "send back" and "records in a second time "or" never record "and I continue to choose the latter option.
Another problem is that in Bridge (version 2.0.0.975) I can no longer see thumbnails of RAW files from my Canon 40D that I saw before.
Should I upgrade ACR? which is the latest version supported on my Mac?
thank youSergio Bellotto if you keep receiving the registration screen then please try accepting the screen in a different User account.
-
Hi, I need to activate my Adobe CS3 on a new computer because my old one died and I'm having difficulty. Tried the normal registration way and then logged in with my Adobe ID and can see the software and activation code already registered. How to get it on my computer registered?
If your two activation are in use you need to call Adobe. Install CS3 to to point of activation and call Adobe at that point. They have help me in cases like your My Disk crashed and I replaced it. Could not deactivate the crash activation. I done that twice over the years I've been using PS for around 20 years
To see your key you need to click on the product in your Adobe products and services page. -
Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?
Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?
-
Windows 8 and IE10 not accepting Proxy Settings via Group Policy
We have recently introduced a couple of Windows 8 computers in our network, and we are having issues applying the Internet Explorer Proxy Server settings.
We use a Microsoft TMG 2010 server as our proxy server for accessing the internet.
We have been using a GPO with the following settings to automatically configure our Windows 7 computers running IE9 with the appropriate Proxy settings:
User Configuration\Policies\Windows Settings\Internet Explorer Maintenance\Connection/Proxy Settings
“Enable Proxy Settings” : Checked
“Address of proxy” : server.domain.local
“Port” : 8080
“Use the same proxy server for all addresses” : Checked
“Exceptions” : Here we have a list of several internal or partner sites that should not be proxied.
This GPO has worked beautifully for our Windows XP and Windows 7 users with IE 7, 8 and 9.
Now with Windows 8 and IE10, this no longer works.
I’ve therefore added a Windows Server 2012 Domain Controller to the network, and using GPMC on that new DC, I created a new GPO with the following settings:
User Configuration\Preferences\Control Panel Settings\Internet Settings\Internet Explorer 10
Now, seeing as these are preferences, it’s a little different. But, I’ve “checked off” the option “Use a proxy server for your LAN” as well as “Bypass proxy server for local addresses”.
Then I click on “Advanced” and setup all my proxy settings the way I would like them, including the proxy server name, port and exceptions list.
When this new group policy gets applied to my Windows 8 PC, the only setting that gets applied is the “Use a proxy server for your LAN”.
It does not configure the name or port of the proxy server nor does it configure the exceptions list.
If I go back to the GPMC, and edit the new GPO, the settings are all there.
However, if I just view the settings from the main GPMC screen (without opening the GPO itself),
I don’t see all of those settings (again, only the one “Use a proxy server…”)
What am I missing???Hi All, - (Revised Answer by myself)<o:p></o:p>
I banged my head against the keyboard on this one for some time trying to get this group policy to apply. I
did every thing that was suggested, learning about the F6 and F7 keys to Green underline and Red underline the options required and not required. I even gave in and used the registry settings and it still did not work. It turned out that I had
2 issues. The first one is obvious and the second not so obvious, this is how it is setup:
I have a 2012 R2 Standard DC with Windows 8.1 clients/workstations and IE 11. As you are aware you must make
sure that the following are underlined in green:
Automatically detect settings - (but not ticked)<o:p></o:p>
Use proxy server for your LAN<o:p></o:p>
Bypass Proxy for local address<o:p></o:p>
Next I made sure that the following had red dotted lines:
Address<o:p></o:p>
This still didn't work, so I went through my 'Do Not use proxy servers for addresses beginning with' removed all
of these and then re-added one by one until the problem materialized. The first issue was when using wildcards I had added an entry with the following:
http://domain.subdomain.com/*
Then caused my proxy fields not to be applied, I re-added this just with:<o:p></o:p>
http://domain.subdomain.com/
<o:p>This next one is IMPORTANT.</o:p>
I had these entries in a Word document of which I had copied and pasted from the entry box for 'Do
Not use proxy servers for addresses beginning with'. As shown in the screen shot above provided by SVEN_BURGER I had very similar entries:
http://domain.subdomain.com/;10.*.*.*;172.27.*.*;http://172.27.*.*
Each time I copied and pasted the line (+ more) above the proxy field on the Windows 8.1 client
be blank after using 'gpupdate /force' I then noticed that in my Word document the whole string was being seen as 1 URL due to the http part at the beginning, so I changed my entry to look like this:
10.*.*.*;172.27.*.*;http://172.27.*.*;http://domain.subdomain.com/
I again noticed that this section:
http://172.27.*.*;http://domain.subdomain.com/
Was being seen as one URL in my Word document. To resolve this I had to add the URL's individually and
apply and OK these before going back in and making the next entry. So I ended up adding them all individually after separating the
URL's in my Word document.
I hope this helps. -
CREMDM and DEBMDM via Proxy/BAPI
Has anyone used a BAPI/proxy interface for customer and vendor master data instead of IDoc? If so could i get some pointers on where to start or some things that need to be done to make this happen? My scenario is File from MDM and want to use proxy/BAPI to R/3. Hope i am makeing sense. Any help would be greatly appreciated.
Hi Derrik,
there are some BAPI's but I would never use a BAPI when an Idoc is available.
The reason is that the idoc gives you the change to monitor messages in error, reprocess them and so on (like you can do from transaction WE05), instead for BAPI's you do not have these options and you cannot see the result of your operation after you have done it.
Regarding proxies, there is nothing standard in R/3 to send customer/vendors, but in ERP 604 you have the [SupplierERPCreateRequest_In|http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=36BA3D85092411DC5A11000F20FCB6A9] ES for Vendors, for customer you have [CustomerERPCreateRequestConfirmation_In|http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=E9F7B718706E11DA36BB000F20DAC9EF], which unfortunately is synch ES.
By the way, why you do not want to use DEBMAS and CREMAS?
Regards,
Sergio -
500: Registration failed. Check Mobile user and activation code
Hi all,
I am currently implementing SAP's customer financial fact sheet in our landscape. I have tested the service and it is working and creation application and application connections are also done.
However, when I tried to log in using the application i got this error
I have tried many time in creating the application connection with a new username and activation code but still I had this error. I also have double check to make sure the username and activation code is the same as in the SCC that I had created.
Could anyone advice me on this. All advice are greately appreciated.
Thank you.
Regards,
AmandaHi all,
The error above had been solved by adding a security as seen in the print screen bellow.
Thank you.
regards,
Amanda -
Hyper-V host registration in Active Directory.
Hi everybody,
I have question regarding hyper-v nodes registration in active directory.
As in the original TechNet documentation Microsoft (https://technet.microsoft.com/en-us/library/dn550728.aspx) stated:
"...The management network must have connectivity between all required infrastructure, and to any location from which you want to manage the server."
Is it a recommended practice to register the host in AD with the management interface ip address?
Kind regards,
KarolyKardy,
"The management network must have connectivity between all required infrastructure, and to any location from which you want to manage the server."
This is simply saying that any infrastructure you want to use to manage your server (Active Directory, Group Policy, DNS, WSUS, etc.) needs to have network connectivity to your management network. IE. AD needs to have connectivity to your server to push
group policy. By "register" your node in active directory, I'm assuming you mean add it to the domain. Unless there is some obscure reason why you shouldn't, adding it to AD will only aid you in administration.
You mentioned specifically joining the domain "through the management interface". You don't need to specify anything to do this. If the machine has connectivity to AD via whatever means possible you will be fine.
Does this answer your question? -
HTTP connection from OSB web service to external system via a Proxy Server
Dear experts,
May I know has anyone tried to use HTTP protocol to send a request from OSB web service to external system via a proxy server? Heard that we need to establish some sort of tunnel (socket) to talk to Proxy Server. Can you please any have sample code or configuration steps to share?
Thank you very much!!http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#wp1137294
Adding Proxy Servers
Use the Summary of Proxy Servers page to add and configure Proxy Server resources and make them available in Oracle Service Bus as a system resource. You must be in an active session to configure or reconfigure Proxy Server resources.
1. If you have not already done so, click Create to create a new session or click Edit to enter an existing session. See Using the Change Center.
2. Select System Administration > Proxy Servers.
3. Click Add.
4. In the Name field, enter a name for the Proxy Server resource. This is a required field.
5. In the Description field, enter a short description for the Proxy Server resource.
6. In the Host-Port Parameters section, enter the following information:
1. In the Server Host field, enter the host name or IP address of the Proxy Server. This is a required field.
The Server Host name for the Oracle Service Bus proxy server must be identical to the server host name of the actual proxy server.
2. In the Clear Text Port field, enter the Proxy Server clear-text port number.
3. In the SSL Port field, enter the Proxy Server SSL port number. You must enter either a clear text or SSL port number.
4. Click Add.
You can configure multiple Proxy Servers for each Proxy Server resource. This enables Oracle Service Bus to perform load balancing and offer fault tolerance features for the Proxy Server resource.
7. If the Proxy Server performs proxy authentication, enter a user name in the User Name field, and the associated password in the Password and Confirm Password fields.
These fields are optional, and required only if the Proxy Server is secured.
8. Click Save to create and save the Proxy Server resource in the current session.
9. To end the session and deploy the configuration to the run time, click Activate under Change Center. -
Guys, I just upgraded my iphone 3gs to ios6, it took 2 hours get it installed. However asfter installing there are issues with activating it.
Its getting failed every time..."says the activation server is temporarily unavailable".
Tried activating via itunes but no respite " says No sim inserted".
pls help.No, I did not find a way to fix it. Went to Apple store to be told that the phone is dead and I would need to purchase a new phone. A little frustrated with the fact that it is Apple who caused the phone to not work!
-
Apple Mail and GoogleMail via IMAP
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
_*Apple Mail and GoogleMail via IMAP*_
As posts concerning the setup of Apple Mail for GoogleMail IMAP access become more frequent on Apple Discussions, I decided to collect some of the most asked-for info in one place. The following hints are intended to provide enough info for anyone who wants to get started with Google Mail IMAP and Mail.app.
As you might have noticed already, GoogleMail behaves differently from other IMAP accounts in some respects. One of the underlying reasons is its use of labels instead of folders (i.e. instead of moving messages to different folders – like e.g. Private and Work – in order to establish some order, rather there are labels tagged to the messages). Because of this a particular setup of Apple’s Mail client is required.
*Activating IMAP for Google Mail*
If you haven’t activated access via IMAP for Google Mail already, follow the instructions given by Google [here|http://mail.google.com/support/bin/answer.py?answer=77695&topic=13294]. It boils down to this:
1) Sign in to Gmail.
2) Click "Settings" at the top of any Gmail page,
3) click "Forwarding and POP/IMAP",
4) select "Enable IMAP".
5) Click "Save Changes".
*Creating a new account in Apple Mail*
To add a Google Mail IMAP account in Mail.app, go to File > Add Account. A wizard will open which prompts you to insert your Name, the eMail-address of the new account and the password. Don’t use the option for automatic configuration if it’s available. Info on what to type into the different fields can be obtained from Google [here|http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814]. The most important are:
1) Incoming Server: imap.gmail.com, port 993 (using SSL)
2) Outgoing Server: smtp.gmail.com, port 465 or 587 (using SSL)
3) Your account name is your full email address including "@gmail.com" (without the quotation marks)
*Configuring the Google Mail account in Apple Mail*
After you have added your Google Mail IMAP account to Mail.app, you’ll find a section for Google Mail in Mail.app’s sidebar with subfolders like "All Mail" (which has in turn several subfolders) and folders for each label you created with GoogleMail. Now you have to configure the account properly. Despite what [Google recommends|http://mail.google.com/support/bin/answer.py?answer=78892&topic=1281 4], I found the following settings to work best for me.
In the sidebar, navigate to the subfolders Trash/Sent/Drafts/Junk of "Google Mail" (the one with the white folder icon instead of a blue one) in turn and go to "Mailbox" menu > "Use this mailbox for..." > Trash/Sent/Drafts/Junk respectively. Afterwards these folders show up as subfolders to the main Trash/Sent/Drafts/Junk folders in the sidebar (and at the same time disappear from the GMail section). Among others this step is necessary because of Google Mail’s implementation of labels. E.g., as Google states [here|http://mail.google.com/support/bin/answer.py?answer=78892&topic=12814]:
Messages that are deleted from an IMAP folder (...) only have that label removed and still exist in All Mail
So if you want to delete a message you have to set the option to "Use this mailbox for… Trash" as described above. Same applies to sent messages etc.
Furthermore, make sure every checkbox in Mail's Preferences > Accounts > GoogleMail > Behavior is checked . (Some will already and automatically be checked when you apply the option "Use this mailbox for..." as described above).
*Some basic troubleshooting tips*
1) If your counter for unread messages in Mail.app doesn’t refresh properly, go to "Mailbox" menu > "Sync all accounts".
2) If you have set up a Smart Mailbox in Mail e.g. for unread messages and every unread message of Google Mail shows up twice, then add the criterion "Message is not in mailbox" > "All Mail", and set the requirement for messages to comply with ALL conditions (instead of ANY). This is necessary because of every message there is a copy stored in All Mail.
I hope these info will be regarded as helpful by anyone who tries to get started with Google Mail and experiences some problems on the way.
The links given were accessible as of September, 3rd, 2008. The setup was tested on a MacBook with OS X 10.5.4 Leopard and Mail 3.4 (928/928.1).
Good computing.
floba
(Note: the above given hints are personal suggestions and I don’t assume liability for any disorders that might occur after applying the described steps.)
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
_*Apple Mail and GoogleMail via IMAP*_
As posts concerning the setup of Apple Mail for GoogleMail IMAP access become more frequent on Apple Discussions, I decided to collect some of the most asked-for info in one place. The following hints are intended to provide enough info for anyone who wants to get started with Google Mail IMAP and Mail.app.
As you might have noticed already, GoogleMail behaves differently from other IMAP accounts in some respects. One of the underlying reasons is its use of labels instead of folders (i.e. instead of moving messages to different folders – like e.g. Private and Work – in order to establish some order, rather there are labels tagged to the messages). Because of this a particular setup of Apple’s Mail client is required.
*Activating IMAP for Google Mail*
If you haven’t activated access via IMAP for Google Mail already, follow the instructions given by Google [here|http://mail.google.com/support/bin/answer.py?answer=77695&topic=13294]. It boils down to this:
1) Sign in to Gmail.
2) Click "Settings" at the top of any Gmail page,
3) click "Forwarding and POP/IMAP",
4) select "Enable IMAP".
5) Click "Save Changes".
*Creating a new account in Apple Mail*
To add a Google Mail IMAP account in Mail.app, go to File > Add Account. A wizard will open which prompts you to insert your Name, the eMail-address of the new account and the password. Don’t use the option for automatic configuration if it’s available. Info on what to type into the different fields can be obtained from Google [here|http://mail.google.com/support/bin/answer.py?answer=78799&topic=12814]. The most important are:
1) Incoming Server: imap.gmail.com, port 993 (using SSL)
2) Outgoing Server: smtp.gmail.com, port 465 or 587 (using SSL)
3) Your account name is your full email address including "@gmail.com" (without the quotation marks)
*Configuring the Google Mail account in Apple Mail*
After you have added your Google Mail IMAP account to Mail.app, you’ll find a section for Google Mail in Mail.app’s sidebar with subfolders like "All Mail" (which has in turn several subfolders) and folders for each label you created with GoogleMail. Now you have to configure the account properly. Despite what [Google recommends|http://mail.google.com/support/bin/answer.py?answer=78892&topic=1281 4], I found the following settings to work best for me.
In the sidebar, navigate to the subfolders Trash/Sent/Drafts/Junk of "Google Mail" (the one with the white folder icon instead of a blue one) in turn and go to "Mailbox" menu > "Use this mailbox for..." > Trash/Sent/Drafts/Junk respectively. Afterwards these folders show up as subfolders to the main Trash/Sent/Drafts/Junk folders in the sidebar (and at the same time disappear from the GMail section). Among others this step is necessary because of Google Mail’s implementation of labels. E.g., as Google states [here|http://mail.google.com/support/bin/answer.py?answer=78892&topic=12814]:
Messages that are deleted from an IMAP folder (...) only have that label removed and still exist in All Mail
So if you want to delete a message you have to set the option to "Use this mailbox for… Trash" as described above. Same applies to sent messages etc.
Furthermore, make sure every checkbox in Mail's Preferences > Accounts > GoogleMail > Behavior is checked . (Some will already and automatically be checked when you apply the option "Use this mailbox for..." as described above).
*Some basic troubleshooting tips*
1) If your counter for unread messages in Mail.app doesn’t refresh properly, go to "Mailbox" menu > "Sync all accounts".
2) If you have set up a Smart Mailbox in Mail e.g. for unread messages and every unread message of Google Mail shows up twice, then add the criterion "Message is not in mailbox" > "All Mail", and set the requirement for messages to comply with ALL conditions (instead of ANY). This is necessary because of every message there is a copy stored in All Mail.
I hope these info will be regarded as helpful by anyone who tries to get started with Google Mail and experiences some problems on the way.
The links given were accessible as of September, 3rd, 2008. The setup was tested on a MacBook with OS X 10.5.4 Leopard and Mail 3.4 (928/928.1).
Good computing.
floba
(Note: the above given hints are personal suggestions and I don’t assume liability for any disorders that might occur after applying the described steps.)
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information. -
Push data from BW 3.5 to XI 3.0 via ABAP proxy
Hi,
I have the following scenario: I´m in BW 3.5 trying to send data to XI 3.0 via ABAP proxy. I´ve already found a "How-to" to do build this scenario, but something does not work. I think that problem is when a try do the logon from BW to XI because I got the message "logon data not provided" on http service in XI. I´ve already configure an RFC Destination(SM59) as R/3 connection(type 3) and another as HTTP connection to R/3(type H) and both are correct. Someone knows where I configure the user/pass to logon from BW Intergration Server to XI Integration Server?
Regards,
Rafael SoaresHello fellows!
I discovered that my problem was configuration on SXMB_ADM transaction.
Thank you very much for your help!
Best regards.
Rafael
Maybe you are looking for
-
Have upgraded to 7.6.1 and itunes wont open!!!!!!!!!!!!!!!
I have upgraded to itunes 7.6.1 as i kept on finding more and more songs only available on newer versions and i was still on 6, anyhow since i have done this i cannot get itunes to open at all and it is driving me insane, there is no pop up with erro
-
How can I Setup a template for Envelope 6.5 x 3.5 inches in Pages 5.2.2
I am vexed by a problem printing a smaller envelope from pages. If I take the Pages # 10 envelope template, it prints properly. If I go to page setup for the # 10 template and change the dimensions to W 6.5 and H 3.5 inches it prints across the enve
-
When I open elements 9- to create a new video- it is now just a blank, black/gray screen. I can no longer create videos. I can't upload from computer, etc. Is this from the new download of Rebel? Please tell me what to do, where to go. I realize this
-
How to implement this Java Script?
Hello, I have this script to remove the link from titles of web parts. I am new to SharePoint 2013 development. I am not sure where to put it. Not sure what file to put it and how to implement it. How can ensure this code gets run on pages through
-
Can i use an iphone5 in London
Can I use an iphone 5 or a ipad 3 in London?