Registry Permission change GPO

I need to modify the permissions on reg key of
HKEY_LOCAL_MACHINE\Appid\{86F80216-5DD6-4F43-953B-35EF40A35AFEE}
so it hides the wireless key in windows 7 so people cannot view it. I have 500 systems to set this up on as I need to remove the CElevatedWLANUI and any other groups
and replace it with domain admins so that is the only group that can see it. I do not want to have to modify this key on 500 systems as it would take a long time.
How can I modify this key permssions on the reg key value and then deploy it via Group Policy to all workstations.

Hi,
Regarding your request, we could change the registry permission via Group Policy. Please locate the registry security settings from the following path in GPMC:
Computer Configuration/Windows Settings/Security Settings/Registry. Then you could right click on the right side of the console and choose
Add key to change the registry key permission.
For details, please refer to the following article.
Registry security settings
http://technet.microsoft.com/en-us/library/cc778256(v=ws.10).aspx
Hope this helps.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Similar Messages

Registry Permission change

I need to change the ownership and permissions on a CLSID in the registry
see policy below.
When I run the GP Results from the GPMC I see no errors or conflicts however the settings are not being applied.
What could I be doing wrong?

> see policy below.
Since SYSTEM doesn't have full access to this key (in fact it's only
"read" :-) ), GP cannot change ACLs on it. You need to take ownership,
and this requires a script.
Greetings/Grüße,
Martin
Mal ein
gutes Buch über GPOs lesen?
Good or bad GPOs? - my blog…
And if IT bothers me -
coke bottle design refreshment (-:

Setting WMI and Registry permissions via GPO?

Hi,
I am configuring SCOM 2012 R2 for my environment. To configure it for SQL Serve,r I neeed to do the following:
Grant Read permission on HKLM:\Software\Microsoft\Microsoft SQL Server registry path for SQLDefaultAction and SQLMPLowPriv
Grant “Execute Methods”, “Enable Account”, “Remote Enable”, “Read Security” permissions for root, root\cimv2, root\default, root\Microsoft\SqlServer\ComputerManagement11 WMI namespaces to SQLDefaultAction and SQLMPLowPriv
Grant Read permission on HKLM:\Software\Microsoft\Microsoft SQL Server\[InstanceID]\MSSQLServer\Parameters registry path for SQLMPLowPriv for each monitored instance
So I need to assign registry permissions and wmi permissions.
Is there a way to do this via GPO?
Thanks

Hi,
You can not change the permission by using group policy directly.
Steps to solve your requirement,
1. Using the SetACL tool you can automate the management of Windows permissions. It is inherently automatable and scriptable. The
COM version provides the full functionality to any COM-enabled programming language (C#, Visual Basic, C++, Delphi, PowerShell, VBScript, …).
Supported object types: files and folders, registry keys, printers, services, network shares, WMI
So using this tool you can create script to automate Windows permissions.
2. Then you can use the created script as the Startup script in the GPO with privileges to allow the permission changes.
Checkout the below links on similar discussion,
http://social.technet.microsoft.com/Forums/windowsserver/en-US/87d4ed25-5247-41e4-8bb6-e29a078a1da0/change-permissions-for-a-specific-key?forum=winserverGP
http://social.technet.microsoft.com/Forums/en-US/c60ad5bb-309e-471d-9f48-e04e897ba61b/problems-setting-registry-permissions-via-gpo?forum=winserverGP
Regards,
Gopi
www.jijitechnologies.com

CS3 on WinXP and Registry permission

I was troubleshooting UI language problem in InDesign CS3 (5.0.3, German CS3 Design Premium), where UI appeared in English and online-help won't work if non-admin user starts the application on a WinXP, when I discovered the following.
Adobe CS Design Premium, German version, will mess up registry permission on a WinXP client (XP Pro, SP2, German) in the HKLM\Software hive so that "Everybody" group has "FullControl" directly starting at HKLM\Software.
If sub-keys in that hive have the inheritance flag set they will also obtain those permission.
This change in vital system permission (HKLM\Software should never have "FullControl" for standard user account on WinXP) appears after finishing CS3 setup and Patching the Apps to the latest and is definitely not there before CS3 setup has been run.
Come on Adobe. Are you serious.
Opening up vital parts of an OS isn't a very clever idea, isn't it.
Can anyone confirm those findings?
BTW: If someone has the same problem (wrong UI language if user is not admin on WinXP), you might want to try changing permission on the HKLM\Software\Adobe key so "Users" group gets "FullControl". That fixed the problem for us (the above mentioned change in registry permission is not inherited to the HKLM\Software\Adobe key. Therefore it has to be set there explicitly).
Marty

Hi,
I also have problem installing CS3 Desin Premium on WinXP SP3, 32 bit. I tried it 4 times (!) and still got the same result: Shared components, Version Cue and Acrobat Pro are installed. But Photoshop, Illustrator and InDesign can't be installed. I have no idea why it doesn't work this time.
I was forced to change HDD (technical reasons) and reinstall OS. On the old HDD CS3 worked fine.
I also tried the Clean-up utility you mentioned, but there were missing some Windows unistaller components, so it didn't work.
Do you have any clue? Thanks in advance.

Problem to make new project in visual studio 2012 Ultimate RTM This is often caused by registry permission problems

hi
i Install Visual studio Ultimate 2012 RTM and ..
when i want to create a new project (windows application form C#) give me this error :"Visual Studio does not have permissions to read the template information from the system registry. This is often caused by registry permission problems"
what can i do for this problem ?
how can i solve this ?
Visual studio Ultimate 2012 RTM

This issue is quite wide-spread and it affected older Visual Studio versions. I am disapointed by the amount of junk advice and the lack of proper stance from Microsoft.
The only correct solution I could find was provided by HallCrash on July 01, 2010 in this similar thread:
social.msdn.microsoft.com/Forums/en-US/vbexpress2008prerelease/thread/c273b0e1-7f46-4065-afaf-4edf285d2531
Ironically, that thread is locked and I was not able to give recognition to HallCrash there ...
You'd have to scroll almost to the bottom to find HallCrash's solution. That solution is based on a Microsoft supported tool (SubInACL) which can be downloaded here: microsoft.com/en-us/download/details.aspx?id=23510. It limits the registry changes strictly
to Visual Studio. Nevertheless, start by creating a System Restore Point.
I do not trust and would not recommend using unknown software (such as the Softpedia suggestion) for this.
Cheers

Desktop permission changes

I would like some help regarding permissions. In our office, each employee uses their own iMac and we are on a small Ethernet network. There are four iMacs and each is running Snow Leopard. I have configured it so that each iMac is sharing its desktop. In our office workflow, my co-workers and I intuitively share files by dropping them onto each other's desktops.No need to hunt in our drop boxes which are buried a few levels.
ISSUE: When I put a file onto a co-worker's desktop, the file permission changes to 'nobody'. If they continue to work on the file and try to save it, they can't. So in order to continue working on a file they have to 'Get Info' first and change the permissions to 'Read & Write' for themselves. However, if I ask my co-worker to get the file from my desktop, the file's permissions are fine and they can open, modified, and save the file without a problem.
QUESTION: Is there a way to configure our settings so that files can be put onto the desktop's of other co-workers without having to mess with the permissions each time? Why does it work one way (get) but not the other way (put)?

You don't have permissions to modify an item you do not own. When you copy a file to another account, it keeps your ownership and permissions, which means only you can write to it. When another user copies your files, they own the copies, which lets them write to it (you might not have noticed, but you won't have permission to write to their copies, either).
You can use ACL (Access Control List) entries to give additional permissions - each user's Drop Box folder is also set up this way.

Unable to save permission changes in templates in win 2012

Hi,
PKI set up of (2003 and 2008) based Sub CA and 2003 based AD ( with schema version supporting 2008) is running in the enviornment. Now CA is migrating to 2012 setup. When i try to create template and make permission changes, it says " unable to save
permission changes. Directory object not found". When i duplicate and save the template with name change and wait for 10-15 min and then open that template again and make permission changes, it works.
Just wanted to know if this is because of some feature issue and will it get resolved if AD is upgraded to 2012 schema.
Thanks
Neha Garg

On Fri, 13 Feb 2015 07:07:13 +0000, Neha.ga wrote:
Also, I checked with my AD person. They are also saying that it can be because of current DC architecture and may be a normal thing. Currently they have 2003 AD and they will upgrade schema version for 2012 to see if that makes any change.
As Brian said, this is likely due to replication delays. Updating the
schema version is not likely going to resolve this. If you know how to work
around the issue then I wouldn't worry about it too much. Creating new
certificate templates should not be a frequent task.
Paul Adare - FIM CM MVP
Penguin Trivia #46: Animals who are not penguins can only wish they were.
-- Chicago Reader 10/15/82

Modify / Add registry keys through GPO

Hi
How can we add / modify registry key through GPO (we are using Windows 2003 AD). Our requirement is to add / modify below key
HKEY LOCAL MACHINE\Software\Microsoft\Ole , Name: EnableDCOM, Type: REG_SZ, Data: Y
Thanks in advance
LMS

Hi,
In addition to the above suggestions, Registry GPP is another alternative method to achieve your goal.
You do not need to upgrade to Windows Server 2008 or Windows Server 2008 R2 to use Group Policy Preference policies. You can configure a Group
Policy preference item in a Windows Server 2003 environment from either a Windows Server 2008/R2 server or a Windows Vista with Service Pack 1/Windows 7 client with RSAT update installed. If you do not have Windows Server 2008/R2 server, you can download
and install Remote Server Administration Tools on a Windows Vista or Windows 7 client to manage and configure them.
Microsoft Remote Server Administration Tools for Windows Vista
http://www.microsoft.com/downloads/details.aspx?FamilyId=9FF6E897-23CE-4A36-B7FC-D52065DE9960&displaylang=en
Remote Server Administration Tools for Windows 7
http://www.microsoft.com/downloads/details.aspx?FamilyID=7D2F6AD7-656B-4313-A005-4E344E43997D&displaylang=en
The CSEs for the new Group Policy preference functionality are required in Windows XP Service Pack 2 (SP2), Windows Server 2003 Service Pack 1 (SP1), and Windows Vista to process the new preference items. To download and install CSEs, please refer to the following
link:
Information about new Group Policy preferences in Windows Server 2008
http://support.microsoft.com/kb/943729
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Finder Windows Always Locked - After Permission Change

Hello.
I noticed that other users on my computer had access to some folders (those I created) within my home directory. I didn't want this to be the case so I set permissions for my home directory and did "Apply to all items" so that the permissions are now "Me - Read & Write" and "everyone - Write only (Drop Box)." I am an administrator on the computer.
Now, every time I do a "get info" on a folder I have to unlock it by typing in my password, whereas before the get info windows were unlocked. I'm not positive the permission change is what cased the locked Finder windows, but I think that is what caused it. Also, I tried unlocking the folder and then doing the "apply to enclosed items" but that did not help.
Thanks for any help,
KK

1. Use the "apply to enclosed items" option with great care. Not all items in your home folder should have the same settings, & certainly you would not normally want everyone to be able to write to them all, even if they can't read what they put there!
2. AFAIK, in Leopard the lock at the bottom of the Get Info window always is in the locked state when the window is first opened, regardless of who owns the item it shows. Generally, you only need to unlock it with an admin password to make sharing & permissions changes. If you own the file, you should be able to (for instance) add Spotlight comments or change the name without needing to unlock it. IOW, the lock is for the sharing & permissions section, not the entire window.

EXC_BAD_ACCESS (SIGBUS) with .pkg file after permission change on my HDD

Hi everybody excuse my english, i'm form french.
I'm here because I can not install my mobile modem 3G driver (.pkg). When I try to install I have this message *Setup can not open the package. It is likely that the executable file for applications installation has no property rights and / or authorizations.* and after crash and give me exception error *KERNPROTECTIONFAILURE at 0x0000000000000027*.
Thanks for your help

Nobody can help me?? I think my installer.app is corrupted due to permission change and I tried all disk authorization repair but nothing to do. There are no apple responsable support in this forum??
thanks

How do I go back into my registry and change a number for loading apps and websites from 20 back to ten?

I tried something suggested from a friend who said to go to a spot in my registry and change a number from 10 to 20, and this would help apps to load better, giving them more time. But now nothing will load because there is to much time taken. I need to find that segment of the registry and change the number back. When I went there, a little box popped up and said, "I will be careful I promise. "

I did the resetting preferences, still no help, still cannot play flash games on facebook like Indiana Jones, Cityville, and Pioneerville. I wish I could go back and change that number I changed from 20 back to 10. I would be playing right now.

Ddl trigger to track permission change in database

Hi,
How can I create a DDL trigger to log any permission change in a database?
thanks
oldmandba

Your best approach is Event Notification.
Event Notification vs DDL triggers:
http://technet.microsoft.com/en-us/library/ms189855(v=sql.105).aspx
BOL links on Event Notification:
http://technet.microsoft.com/en-us/library/ms187476(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/ms182602(v=sql.105).aspx
http://technet.microsoft.com/en-us/library/ms189453.aspx
DDL Trigger solution:
http://www.mssqltips.com/sqlservertip/2085/sql-server-ddl-triggers-to-track-all-database-changes/
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Permission changes after running maintainence scripts

Everytime I ran the daily, weekly and monthly scripts, I will exprience a change in permission when I run disk utility. This is where it changed:
Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
Is this permission change normal?
They will stay correct until the next time I run the maintainence scripts though.

Yes, that is normal; the BaseSystem.pkg defines the permissions on that log as 0600, while the weekly cron task sets the permissions on it to 0640 while rotating the log files. The difference between these settings is that any administrator can read the file while it is 0640, because the file's group is the admin group and the third value controls the group access.
(10611)

/dev/null file permission changes frequently

Hi,
We are experiencing file permission change issue frequently for the
following files:
root@domain5 # ls -l /devices/pseudo/mm@0:null
crw-rw-rw- 1 root sys 13, 2 Apr 22 2009
/devices/pseudo/mm@0:null
root@domain5 # ls -l /dev/null
crw-rw-rw- 1 root sys 13, 2 Oct 25 07:01 /dev/null
By default, above is the file permission settings. If the file permission
changes, it will look like as below:
root@domain5 # ls -l /devices/pseudo/mm@0:null
cr--r--r-- 1 root sys 13, 2 Apr 22 2009
/devices/pseudo/mm@0:null
root@domain5 # ls -l /dev/null
cr--r--r-- 1 root sys 13, 2 Oct 25 07:01 /dev/null
Due to this file permission change the script which uses this file loose
the write permission and the script fails. To fix this issue, we will be
manually changing the permission. Can you please help me to know the cause for
this file permission change.
Thanks,
Ram.

You need to correlate any changes on the system to when you have the problem, or see the date on /dev/null change. Software packages can change this, applications can change this, sometimes even patch installs.
Even certain administrative practices.
Here's one example, where touching a vendor software-created printer config with native Solaris admintool would change /dev/null permissions
http://www.rootunix.org/SOLARIS/printFAQ.txt
10) ONLY ROOT CAN SEND PRINT JOBS:
This problem is caused by network spooling software that for a
network printer that uses /dev/null for the printer device. The
software monitors the queue and spools the print requests over the
network to the printer. If the printer setup is modified in any
way with Admintool, the printer device (/dev/null) permissions will
change to 600 owner lp.

[solved] Help undoing permission changes

I got this error
[2012-09-15 05:06] warning: directory permissions differ on usr/
filesystem: 775 package: 755
[2012-09-15 05:06] warning: directory permissions differ on usr/lib/
filesystem: 775 package: 755
while intsalling some packages and so hastily cd'ed into /usr and did
$ sudo chmod 775 ./
$ sudo chmod 775 lib/
is there any way to undo these changes, which from what I read is pretty unlikely, or at least to change them back to the predefined permission settings? Like if yall happen to know that /usr is actually supposed to be 716 (just to pick a random number).
I've googled it and don't have much hope, but I think that I ought to do a bit more googling before giving up.
Last edited by lspci (2012-09-15 11:49:54)

Lennie wrote:775 is what you already had. 755 is what's recommended.
Read the wiki page about chmod
So my permission change wasn't a problem, then? I didn't see anything in wiki article that mentioned the default setting, though I gathered from it that 755, was kind of recommended.

Registry Permission change GPO

Similar Messages

Maybe you are looking for