Regression results under linux

Hi everybody,
I ran the T2 regression under Linux and the tool ends correctly. The problem is that all tests gave result "Unknown".
I ran the following command:
sims -sys=cmp1 -group=cmp1_mini_T2 -nobuild -vcs_rel_name=vcs_build_2008_07_07_0
and the results are
<<snip>>
Total Diags : 6
Total Passed : 0
Total Unknown: 6
Total Unfini : 0
Total Fail : 0
Total Cycles : N/A
Total Time : N/A
Average C/S : N/A
Do you have any suggestions? What means unknown, I can't find it in the OpenSPARCT2_DVGuide.pdf manual.
thanks,
pico

Thanks for the quick response. I was hoping my problem was also the result of goldfinger, but given your description I don't believe it is (no "FATAL ERROR" anywhere in my logs). I'm actually running redhat enterprise so I don't think there should be redhat library issues either. However, I do think I am having 32bit/64bit compatibility issues with the pli libraries. Perhaps the following might help in diagnosing my problem
1) running sims without "-vcs_full64" and a 32bit version of Vera I see the following error in my sims.log
Program error in file ../symtype.c at line 407.
  Assertion failed:
  t != NULL && t->tycon == TYCON_OBJECTperforming a simple grep on "symtype.c" I found that it's only referenced in
verif/env/common/pli/vera/loadpli/linux/libverapli.soand
verif/env/common/pli/vera/loadpli/libverapli.so2) running sims with a amd64 version of Vera and using the "-vcs_full64" flag eliminates the error in 1) but results in the the following warnings in the compile.log file
/usr/bin/ld: warning: i386 architecture of input file `<path>/opensparct2/verif/env/common/pli/global_chkr/linux/libglobal_chkr.a(global_chkr.o)' \
is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `<path>/opensparct2/verif/env/common/pli/socket/linux/libsocket_pli.a(socket.o)' \
is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `<path>/opensparct2/verif/env/common/pli/socket/linux/libsocket_pli.a(queue.o)' \
is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `<path>/opensparct2/verif/env/common/pli/monitor/linux/libmonitor_pli.a(monitor.o)' \
is incompatible with i386:x86-64 output
/usr/bin/ld: warning: i386 architecture of input file `<path>/opensparct2/verif/env/common/pli/monitor/linux/libmonitor_pli.a(hasher.o)' \
is incompatible with i386:x86-64 output3) just out of curiosity I ran sims with the 64bit Vera and without "-vcs_full64". As expected I see a bunch of i386:x86-64 incompatible with i386 output warnings in the compile.log and no simv is built.
For all scenarios, 1-3, I also see the warning
/usr/bin/ld: warning: libstdc++.so.5, needed by <path>/rhel_5/vcs-2006.06-sp2/linux/lib/libvcsnew.so, \
may conflict with libstdc++.so.6My best guess is that not all of the precompiled libraries that come bundled with the T2 were compiled for x86-64 and that is what's causing me problems. I tried to recompile the pli libraries using the makefile in /tools/pli but ran into some issues that I'm going to try and fix today. Any help would be greatly appreciated. Thanks!

Similar Messages

  • Scaling under Linux

    Hello everybody,
    I am currently writing a photoalbum application using JavaEE and I use the folowing code to generate a thumbnail of an image.
            BufferedImage image = ImageIO.read(new File("IMG_1381.JPG"));
            // determine thumbnail size from WIDTH and HEIGHT
            int thumbWidth = 150;
            int thumbHeight = 100;
            double thumbRatio = (double) thumbWidth / (double) thumbHeight;
            int imageWidth = image.getWidth(null);
            int imageHeight = image.getHeight(null);
            double imageRatio = (double) imageWidth / (double) imageHeight;
            if (thumbRatio < imageRatio) {
                thumbHeight = (int) (thumbWidth / imageRatio);
            } else {
                thumbWidth = (int) (thumbHeight * imageRatio);
            thumbHeight = 100;
            thumbWidth = (int) ((thumbHeight / (double) imageHeight) * imageWidth);
            // draw original image to thumbnail image object and
            // scale it to the new size on-the-fly
            BufferedImage thumbImage = new BufferedImage(thumbWidth, thumbHeight, BufferedImage.TYPE_INT_RGB);
            Graphics2D graphics2D = thumbImage.createGraphics();
            graphics2D.setRenderingHint(RenderingHints.KEY_RENDERING, RenderingHints.VALUE_RENDER_QUALITY);
            graphics2D.setRenderingHint( RenderingHints.KEY_INTERPOLATION, RenderingHints.VALUE_INTERPOLATION_BICUBIC );
            graphics2D.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON);
            graphics2D.drawImage(image, 0, 0, thumbWidth, thumbHeight, null);
            // save thumbnail image to OUTFILE
            BufferedOutputStream out = new BufferedOutputStream(new FileOutputStream("thumb.jpg"));
            JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(out);
            JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam(thumbImage);
            int quality = 100;
            quality = Math.max(0, Math.min(quality, 100));
            param.setQuality(1.0f,true);
            encoder.setJPEGEncodeParam(param);
            encoder.encode(thumbImage);
            out.close();The code works perfectly fine under Mac OS X but generates very poor results under linux. It seems as if it was ignoring the BICUBIC scaling when under Linux. Has anybody ever experienced the same behavior. Any suggestions?
    Thank you,
    Martin

    When a PSU's efficiency is too low, it can not deliver the demanded output. Higher temps make efficiency drop significantly. When a PSU can't deliver the demanded output, chances are it can not keep the voltages (3,3v / 5v / 12v) within safety margins. When a component is overvolted/undervolted for a longer period of time, it will be damaged.
    Most of the time, your board will be damaged first. It delivers power mainly to the cpu, so the faulty board could damage the cpu due to overvolting it...
    Look out for an Enermax or OCZ with 30+ amps on all rails, for example an Enermax Noisetaker 475W (double 12v rail) or an Enermax 465W (single 12v rail). Both have efficiency in the 75-80% range at all levels of output demand. It doesn't get any better than that. Those things are pricy, but so is the rest of your rig, so you don't want to damage your stuff any further.

  • Java running under linux with crontab

    I'm having a problem:
    i want to run a java program under linux with crontab.
    my classes are in a directory and aren't in a package. i run em by invoking ./start which is a small script that i wrote. The script is in the same dir as the classes and invokes java by "java Main >>logjava.txt " but this doesn't seem to work all i get is an empty logfile
    i need to run the program every day at 0800 so i inserted the following in crontab:
    0 8 * 1-5 /var/"path"/start > logjava (where path is the path to the classes dir)
    if i run the cmdline from anywhere on the prompt i get the result i want. I think it's because the cron runs it from the root dir thus making java unable to find the classes
    Any suggestions would be welcome. or can some1 tell me how to make linux executables from the java (i usually use jsmooth for the windows exe)

    You can execute several commands in the process started by cron. You separate them using semicolons.
    Have you tried a cron entry like this:
    0 8 * 1-5 cd /var/"path";pwd;echo $PATH; ./start > logjavaOr, you may need to make sure the process started by cron gets the same environment as your interactive shells do, by explicitly loading your setup or .login scripts:
    0 8 * 1-5 . $HOME/.setup;cd /var/"path";pwd;echo $PATH; ./start > logjava

  • JMF code working under linux but not windows XP

    Hello everyone,
    I'm currently working on a nice cross-platform project involving sound producing. I decided to take a look at JMF and test it a bit to know if its features can suit me. I tried to make it works under windows, using a very simple sample of code. The system seems to play the sound as some console output detects the start and the end, but all i hear is a very short noise ( 1/2second ) like a "CLIK" and nothing else. I tested the code under linux, using the same computer and it works just fine, playing the same wave nicely and entirely.
    some info:
    -i used the cross platform JMF, no performance pack ( i tried it , but still no result )
    -the code just opens a file dialog and plays the selected file
    -the selected file was always a very simple .wav
    -i did not use system classpath variables because i don't like it, i rather use local classpath ( which works fine too, no doubt about it )
    -i tested this little soft on 2 other computer using windows XP, and still got the same result.
    Please, have you got an idea about what's going on ?
    Thanks a lot for any answer!
    Maxime - Paris . France
    Code Sample:
    import java.io.File;
    import java.io.IOException;
    import java.net.MalformedURLException;
    import javax.media.*;
    import javax.swing.JDialog;
    import javax.swing.JFileChooser;
    import javax.swing.JOptionPane;
    public class JMFSound extends Object implements ControllerListener {
         File soundFile;
         JDialog playingDialog;
         public static void main (String[] args) {
              JFileChooser chooser = new JFileChooser();
              chooser.showOpenDialog(null);
              File f = chooser.getSelectedFile();
              try {
                   JMFSound s = new JMFSound (f);
              } catch (Exception e) {
                   e.printStackTrace();
         public JMFSound (File f) throws NoPlayerException, CannotRealizeException,     MalformedURLException, IOException {
              soundFile = f;
              // prepare a dialog to display while playing
              JOptionPane pane = new JOptionPane ("Playing " + f.getName(), JOptionPane.PLAIN_MESSAGE);
              playingDialog = pane.createDialog (null, "JMF Sound");
    playingDialog.pack();
              // get a player
              MediaLocator mediaLocator = new MediaLocator(soundFile.toURL());
              Player player =     Manager.createRealizedPlayer (mediaLocator);
    player.addControllerListener (this);
    player.prefetch();
    player.start();
    playingDialog.setVisible(true);
         // ControllerListener implementation
         public void controllerUpdate (ControllerEvent e) {
    System.out.println (e.getClass().getName());
         if (e instanceof EndOfMediaEvent) {
                   playingDialog.setVisible(false);
                   System.exit (0);
    Message was edited by:
    Monsieur_Max

    Hello everyone,
    I'm currently working on a nice cross-platform project involving sound producing. I decided to take a look at JMF and test it a bit to know if its features can suit me. I tried to make it works under windows, using a very simple sample of code. The system seems to play the sound as some console output detects the start and the end, but all i hear is a very short noise ( 1/2second ) like a "CLIK" and nothing else. I tested the code under linux, using the same computer and it works just fine, playing the same wave nicely and entirely.
    some info:
    -i used the cross platform JMF, no performance pack ( i tried it , but still no result )
    -the code just opens a file dialog and plays the selected file
    -the selected file was always a very simple .wav
    -i did not use system classpath variables because i don't like it, i rather use local classpath ( which works fine too, no doubt about it )
    -i tested this little soft on 2 other computer using windows XP, and still got the same result.
    Please, have you got an idea about what's going on ?
    Thanks a lot for any answer!
    Maxime - Paris . France
    Code Sample:
    import java.io.File;
    import java.io.IOException;
    import java.net.MalformedURLException;
    import javax.media.*;
    import javax.swing.JDialog;
    import javax.swing.JFileChooser;
    import javax.swing.JOptionPane;
    public class JMFSound extends Object implements ControllerListener {
         File soundFile;
         JDialog playingDialog;
         public static void main (String[] args) {
              JFileChooser chooser = new JFileChooser();
              chooser.showOpenDialog(null);
              File f = chooser.getSelectedFile();
              try {
                   JMFSound s = new JMFSound (f);
              } catch (Exception e) {
                   e.printStackTrace();
         public JMFSound (File f) throws NoPlayerException, CannotRealizeException,     MalformedURLException, IOException {
              soundFile = f;
              // prepare a dialog to display while playing
              JOptionPane pane = new JOptionPane ("Playing " + f.getName(), JOptionPane.PLAIN_MESSAGE);
              playingDialog = pane.createDialog (null, "JMF Sound");
    playingDialog.pack();
              // get a player
              MediaLocator mediaLocator = new MediaLocator(soundFile.toURL());
              Player player =     Manager.createRealizedPlayer (mediaLocator);
    player.addControllerListener (this);
    player.prefetch();
    player.start();
    playingDialog.setVisible(true);
         // ControllerListener implementation
         public void controllerUpdate (ControllerEvent e) {
    System.out.println (e.getClass().getName());
         if (e instanceof EndOfMediaEvent) {
                   playingDialog.setVisible(false);
                   System.exit (0);
    Message was edited by:
    Monsieur_Max

  • ARIAL FONT IN REPORTS(WINDOWS), NOT SHOWN CORRECTLY UNDER LINUX

    Our Reports are developed under Windows (Report Builder 9.0.4.0.33 and Windows 2000/Windows XP) and generated under Linux (IAS 10.1.2.0.2 with Red Hat Advanced Server). The Report Output is a PDF, that will be downloaded by the user with WEB.SHOW_DOCUMENT. This works fine, but fonts are not shown correctly in the PDF, especially ARIAL, which is the font we use.
    I have run the Fontsolution Configuration Script from Metalink, but we still have a problem.
    When you look at the font.pdf, wich is the testreport from fontsolutions, some sizes and styles of Arial are printed correctly others not.
    Arial 8 is ok, but Arial 10 and Arial 12 are something like Times New Roman.
    Arial 12 Bolded is correct, but Arial 12 italic and Arial 12 bold italic are also not
    the Arial Font.
    How can we correct this problem?
    Regards
    Udo
    These are the files changed by Fontsolution Configuration Script:
    uifont.ali
    # uifont.ali provided in fontsolutions.tar for developer 9.0.2
    # $Header: uifont.ali@@/main/22 \
    # Checked in on Tue Jan 8 15:32:42 PST 2002 by idc \
    # Copyright (c) 1999, 2002 by Oracle Corporation. All Rights Reserved. \
    # $
    # $Revision: /main/22 $
    # Copyright (c) Oracle Corporation 1994, 2002.
    # All Rights Reserved.
    # DESCRIPTION:
    # Each line is of the form:
    # <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet> = \
    # <Face>.<Size>.<Style>.<Weight>.<Width>.<CharSet>
    # The <Face> must be the name (string/identifier) of a font face. The
    # <Style>, <Weight>, <Width>, and <CharSet> may either be a numeric
    # value or a predefined identifier/string. For example, both US7ASCII
    # and 1 are valid <CharSet> values, and refer to the same character set.
    # The <Size> dimension must be an explicit size, in points.
    # The following is a list of recognized names and their numeric
    # equivalents:
    # Styles Numeric value
    # Plain 0
    # Italic 1
    # Oblique 2
    # Underline 4
    # Outline 8
    # Shadow 16
    # Inverted 32
    # Overstrike 64
    # Blink 128
    # Weights Numeric value
    # Ultralight 1
    # Extralight 2
    # Light 3
    # Demilight 4
    # Medium 5
    # Demibold 6
    # Bold 7
    # Extrabold 8
    # Ultrabold 9
    # Widths Numeric value
    # Ultradense 1
    # Extradense 2
    # Dense 3
    # Semidense 4
    # Normal 5
    # Semiexpand 6
    # Expand 7
    # Extraexpand 8
    # Ultraexpand 9
    # Styles may be combined; you can use plus ("+") to delimit parts of a
    # style. For example,
    # Arial..Italic+Overstrike = Helvetica.12.Italic.Bold
    # are equivalent, and either one will map any Arial that has both Italic
    # and Overstrike styles to a 12-point, bold, italic Helvetica font.
    # All strings are case-insensitive in mapping. Font faces are likely to
    # be case-sensitive on lookup, depending on the platform and surface, so
    # care should be taken with names used on the right-hand side; but they
    # will be mapped case-insensitively.
    # See your platform documentation for a list of all supported character
    # sets, and available fonts.
    # BUGS:
    # o Should accept a RHS ratio (e.g., "Helv = Arial.2/3").
    #===============================================================
    [ Global ] # Put mappings for all surfaces here.
    # Mapping from MS Windows
    #Arial = helvetica
    #"Courier New" = courier
    #"Times New Roman" = times
    #Modern = helvetica
    #"MS Sans Serif" = helvetica
    #"MS Serif" = times
    #"Small Fonts" = helvetica
    "Sadvocra" = helvetica..Oblique.Medium
    "sAdC128d" = helvetica..Plain.Medium
    "CarolinaBar-B39-25F2" = helvetica...Bold
    #"IDAutomationSMICR" = helvetica
    # Mapping from Macintosh
    #"New Century Schlbk" = "new century schoolbook"
    #"New York" = times
    #geneva = helvetica
    #===============================================================
    [ Printer ] # Put mappings for all printers here.
    #===============================================================
    [ Printer:PostScript1 ] # Put mappings for PostScript level 1 printers here.
    # Sample Kanji font mappings
    ...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    .....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
    .....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
    # Mapping from MS Windows
    #Roman = palatino
    #Script = "itc zapf chancery"
    #FixedSys = courier
    #System = helvetica
    # Mapping from Macintosh
    #"Avant Garde" = "itc avant garde gothic"
    # Mapping from Motif display
    #fixed = courier
    #clean = times
    #lucidatypewriter = courier
    #lucidabright = times
    #Arial = helvetica
    #"Courier New" = courier
    #"Times New Roman" = times
    # MICR font
    #helvetica=IDAutomationSMICR
    #===============================================================
    [ Printer:PostScript2 ] # Put mappings for PostScript level 2 printers here.
    # Sample Kanji font mappings
    ...UltraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...UltraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...ExtraLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...ExtraLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...Light..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...Light..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    ...DemiLight..JEUC = "Ryumin-Light-83pv-RKSJ-H"...Light..JEUC
    ...DemiLight..SJIS = "Ryumin-Light-83pv-RKSJ-H"...Light..SJIS
    .....JEUC = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..JEUC
    .....SJIS = "GothicBBB-Medium-83pv-RKSJ-H"...Medium..SJIS
    # Mapping from MS Windows
    #Roman = palatino
    #Script = "itc zapf chancery"
    #FixedSys = courier
    #System = helvetica
    # Mapping from Macintosh
    #"Avant Garde" = "itc avant garde gothic"
    # Mapping from Motif display
    #fixed = courier
    #clean = times
    #lucidatypewriter = courier
    #lucidabright = times
    #===============================================================
    [ Printer:PCL5 ] # Put mappings for PCL 5 printers here.
    helvetica = univers
    times = "cg times"
    clean = "antique olv"
    fixed = courier
    lucida = univers
    lucidabright = "cg times"
    lucidatypewriter = courier
    "new century schoolbook" = univers
    terminal = "line printer"
    #===============================================================
    [ Display ] # Put mappings for all display surfaces here.
    #===============================================================
    [ Display:Motif ] # Put mappings for Motif displays here
    # Fix for bug no 778937 DO NOT MOVE!
    Roman.....sjis = lucida.....jeuc
    Script.....sjis = lucidabright.....jeuc
    FixedSys.....sjis = fixed.....jeuc
    System.....sjis = lucida.....jeuc
    .....sjis = .....jeuc
    # Mapping from MS Windows
    Roman = lucida
    Script = lucidabright
    FixedSys = fixed
    System = lucida
    # Mapping from Macintosh
    "Avant Garde" = helvetica
    "Bookman" = times
    #===============================================================
    [ Display:CM ] # Put mappings for all CM displays here.
    # These are DEC-specific, and may need localization
    *..Blink = Blinking
    *..Inverted+Underline.Bold = ReverseBoldUnderline
    *..Inverted+Underline. = UnderlineReverse
    *..Underline.Bold = UnderlineBold
    *..Inverted.Bold = ReverseBold
    *...Bold = Bold
    *..Underline = Underline
    *..Inverted = Reverse
    * = Plain # The font of last resort
    # Oracle Report PDF sections
    # Three new sections have been added:
    # [ PDF ] - Used for font aliasing and Multibyte language support
    # [ PDF:Embed ] - Used for Type 1 font embedding
    # [ PDF:Subset ] - Used for True Type Font subsetting
    [ PDF ]
    # This example shows how to rename helvetica font to Courier font
    # helvetica = Courier
    # You can Alias specific styles of font as below
    # helvetica.12..Bold.. = Courier.14....
    # "Lucida Bright".12..Bold = "New Century Schoolbook"
    # Support for Far Eastern Languages:
    # PDF section can be additionally used to enable Multibyte language support
    # built into Reports. To use this feature with Adobe (r) Acrobat (c), you
    # need to install the Asian font pack available online at the Adobe web site.
    # .....SJIS = "HeiseiKakuGo-W5-Acro"
    # A Japanese report run with Shift-JIS character set is replaced to
    # HeiseiKakuGo-W5-Acro CID font.
    arial = Arial
    "arial" =Arial
    "arial narrow" = "Arial Narrow"
    "courier new" = "Courier New"
    tahoma = Tahoma
    "microsoft sans serif" = "Microsoft Sans Serif"
    "ms sans serif" = "MS Sans Serif"
    "times new roman" = "Times New Roman"
    [ PDF:Embed ]
    # This example shows how to embed Type 1 helvetica font into the PDF file:
    # helvetica = "helvetica.afm helvetica.pfa"
    # You need to specify the .afm file before the .pfa file.
    # The font files must exist in one of the folders specified in REPORTS_PATH.
    [ PDF:Subset ]
    # This example shows how to subset Arial True Type font into the PDF file:
    # helvetica = "Arial.ttf"
    # The True Type font files must exist in any one of the folders specified in
    # REPORTS_PATH.
    helvetica..Oblique.Medium = "Sadvocra.ttf"
    helvetica..Plain.Medium = "Sadc128d.ttf"
    helvetica...Bold = "CarolinaBar-B39-25F2-Normal.ttf"
    # NOTES ON PRECEDENCE OF PDF SECTIONS:
    # If you have entries for a same font in many PDF sections, then Font
    # Aliasing entry will take precedence over Font Embedding entry. Entries
    # in Font Embedding will take precedence over the entries in Font Subsetting
    # section.
    # Generic entries for a font must follow more specific entries for the same
    # font. For instance, if you want to subset helvetica Plain, helvetica Bold,
    # helvetica Italic and helvetica Bold-Italic fonts, your entries must be:
    # [ PDF:Subset ]
    # helvetica..Italic.Bold.. = "Arialbi.ttf"
    # helvetica...Bold.. = "Arialb.ttf"
    # helvetica..Italic... = "Ariali.ttf"
    # helvetica..... = "Arial.ttf"
    # If helvetica..... entry appears in the top of the list, all the styles of
    # helvetica font in the layout will be subset as helvetica Plain font.
    uiprint.txt
    # This is the printer configuration file.
    # The format for entries in this file is:
    # <OSName>:<Type>:<Version>:<Long Name>:<Description File>:
    # The first field is the name of the printer. It is the name you give
    # to lpq.
    # The second field is the type of driver to be used for the printer.
    # Currently, "PostScript" and "ASCII" are the only types of driver for
    # printers supported for now. But in future we may be supporting
    # drivers for other printer types.
    # The third field is the version of the type of printer driver. It's 1
    # or 2 for all PostScript printers; or 1 for ASCII printers.
    # The fourth field is a long description of the printer. This will be
    # presented to the user in the "Choose Printer" dialog window.
    # The fifth field is the printer description file to be used. For
    # PostScript printers it is the PPD file of the printer. (This field is
    # currently unused for ASCII printers.)
    # You can use default.ppd for the description file if you don't have a
    # PPD file for the printer, but it's best to use the correct PPD file
    # for the printer.
    # You must fill in at least the first two fields (printer name and
    # type). If the version is empty, it defaults to "1"; if the long name
    # or description are empty, they will default to empty strings. A
    # version of 1 or an empty long name is fine, but, for PostScript
    # printers, you must fill in the description file name.
    # You don't have to update this file to use any printer. The printer
    # chooser interface let's you select a printer and driver at run time,
    # as well as associate a printer description file to the printer. You
    # should list all printers accessible to users here, however, to
    # simplify selecting a printer.
    # The first entry in this file will be used as the default printer, if
    # no printer was selected in the operating system. (For Unix, the
    # following environment variables will be used in turn to get the
    # default printer's name:
    # TK2_PRINTER
    # ORACLE_PRINTER
    # PRINTER
    # For other platforms, see the Installation and User's Guide for your OS
    # for information on setting the default printer.)
    # WARNING: Do not define multiple entries for the same printer by the
    # same name. Selecting a printer with multiple entries will always result
    # in the first entry being selected. Instead, see if your OS allows you
    # to create an alias for the printer, and use an alias for the second type.
    # The following are examples; replace them with printers accessible from
    # this machine.
    # hqunx15:PostScript:1:The really slow printer on 12th floor:dcln03r1.ppd:
    # hqdev2_pos:PostScript:1:The fast ScriptPrinter in 1281:dclps321.ppd:
    # hqunx106:ASCII:1:LNO printer in the 11th floor printer room:none:
    # hqdev9:PostScript:1:Bogus printer for Reports ASCII QA:default.ppd:
    # hqunx121:PostScript:1:APO printer in 500OP for NLS QA:ok800lt1.ppd:
    # --- Note that the following two printers are aliases for the same
    # --- physical printer, with different names for different types:
    # tk2hp4m:PCL:5:HP printer in 771 for testing PCL:ui4.hpd:
    # tk2bw1ps:PostScript:1:HP printer in 771 for testing PS:hp4mp6_1.ppd:
    # Not A Printer:ASCII:1:Configure your uiprint.txt file:none:
    fontprinter:PostScript:1:printer for fonting fixes:default.ppd:
    datap462.ppd
    *PPD-Adobe: "4.0"
    *% Adobe Systems PostScript(R) Printer Description File
    *% Copyright 1987-1992 Adobe Systems Incorporated.
    *% All Rights Reserved.
    *% Permission is granted for redistribution of this file as
    *% long as this copyright notice is intact and the contents
    *% of the file is not altered in any way from its original form.
    *% End of Copyright statement
    *FormatVersion: "4.0"
    *FileVersion: "3.1"
    *PCFileName: "DATAP462.PPD"
    *LanguageVersion: English
    *Product: "(Dataproducts LZR 2665)"
    *PSVersion: "(46.2) 1"
    *ModelName: "Dataproducts LZR-2665"
    *NickName: "Dataproducts LZR-2665 v46.2"
    *% ==== Options and Constraints =====
    *OpenGroup: InstallableOptions/Options Installed
    OpenUI Option1/Optional Lower Tray: Boolean
    *DefaultOption1: False
    *Option1 True/Installed: ""
    *Option1 False/Not Installed: ""
    CloseUI: Option1
    *CloseGroup: InstallableOptions
    UIConstraints: Option1 False *InputSlot Lower
    *% General Information and Defaults ===============
    *ColorDevice: False
    *DefaultColorSpace: Gray
    *FreeVM: "178744"
    *LanguageLevel: "1"
    *VariablePaperSize: False
    *FileSystem: False
    *Throughput: "26"
    *Password: "0"
    *ExitServer: "
    count 0 eq {  % is the password on the stack?
    true
    dup % potential password
    statusdict /checkpassword get exec not
    } ifelse
    {  %  if no password or not valid
    (WARNING : Cannot perform the exitserver command.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
    } if
    serverdict /exitserver get exec
    *End
    *Reset: "
    count 0 eq {  % is the password on the stack?
    true
    dup % potential password
    statusdict /checkpassword get exec not
    } ifelse
    {  %  if no password or not valid
    (WARNING : Cannot reset printer.) =
    (Password supplied is not valid.) =
    (Please contact the author of this software.) = flush
    quit
    } if
    serverdict /exitserver get exec
    systemdict /quit get exec
    (WARNING : Printer Reset Failed.) = flush
    *End
    *DefaultResolution: 300dpi
    *?Resolution: "
    save
    initgraphics
    0 0 moveto currentpoint matrix defaultmatrix transform
    0 72 lineto currentpoint matrix defaultmatrix transform
    3 -1 roll sub dup mul
    3 1 roll exch sub dup mul
    add sqrt round cvi
    ( ) cvs print (dpi) = flush
    restore
    *End
    *% Halftone Information ===============
    *ScreenFreq: "50.0"
    *ScreenAngle: "54.0"
    *DefaultScreenProc: Dot
    *ScreenProc Dot: " {dup mul exch dup mul add sqrt 1 exch sub } "
    *ScreenProc Line: "{ pop }"
    *ScreenProc Ellipse: "
    { dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
    *End
    *DefaultTransfer: Null
    *Transfer Null: "{ }"
    *Transfer Null.Inverse: "{ 1 exch sub }"
    *% Paper Handling ===================
    *% Use these entries to set paper size most of the time, unless there is
    *% specific reason to use PageRegion.
    *OpenUI *PageSize: PickOne
    *OrderDependency: 30 AnySetup *PageSize
    *DefaultPageSize: Letter
    *PageSize Letter: "statusdict /lettertray get exec letterR"
    *PageSize Letter.Transverse: "statusdict /lettertray get exec letter"
    *PageSize Legal: "statusdict /legaltray get exec"
    *PageSize Ledger: "statusdict /ledgertray get exec"
    *PageSize Statement: "statusdict /statementtray get exec"
    *PageSize Tabloid: "statusdict /11x17tray get exec"
    *PageSize A3: "statusdict /a3tray get exec"
    *PageSize A4: "statusdict /a4tray get exec a4R"
    *PageSize A4.Transverse: "statusdict /a4tray get exec a4"
    *PageSize A5: "statusdict /a5tray get exec"
    *PageSize B4: "statusdict /b4tray get exec"
    *PageSize B5: "statusdict /b5tray get exec b5R"
    *PageSize B5.Transverse: "statusdict /b5tray get exec b5"
    *CloseUI: *PageSize
    *% These entries will set up the frame buffer. Usually used with manual feed.
    *OpenUI *PageRegion: PickOne
    *OrderDependency: 40 AnySetup *PageRegion
    *DefaultPageRegion: Letter
    *PageRegion Letter: "letterR"
    *PageRegion Letter.Transverse: "letter"
    *PageRegion Legal: "legal"
    *PageRegion Ledger: "ledger"
    *PageRegion Tabloid: "11x17"
    *PageRegion A3: "a3"
    *PageRegion A4: "a4R"
    *PageRegion A4.Transverse: "a4"
    *PageRegion A5: "a5"
    *PageRegion B4: "b4"
    *PageRegion B5: "b5R"
    *PageRegion B5.Transverse: "b5"
    *PageRegion Statement: "statement"
    *CloseUI: *PageRegion
    *% The following entries provide information about specific paper keywords.
    *DefaultImageableArea: Letter
    *ImageableArea Letter: "20 16 591 775 "
    *ImageableArea Letter.Transverse: "18 19 593 773 "
    *ImageableArea Legal: "18 19 593 990 "
    *ImageableArea Ledger: "18 16 1205 775 "
    *ImageableArea Tabloid: "16 19 775 1206 "
    *ImageableArea A3: "18 21 823 1170 "
    *ImageableArea A4: "18 18 576 823 "
    *ImageableArea A4.Transverse: "18 19 577 823 "
    *ImageableArea A5: "18 19 401 577 "
    *ImageableArea B4: "19 15 709 1017 "
    *ImageableArea B5: "20 19 495 709 "
    *ImageableArea B5.Transverse: "20 19 495 709 "
    *ImageableArea Statement: "22 19 374 594 "
    *?ImageableArea: "
    save
    /cvp {(                ) cvs print ( ) print } bind def
    /upperright {10000 mul floor 10000 div} bind def
    /lowerleft {10000 mul ceiling 10000 div} bind def
    newpath clippath pathbbox
    4 -2 roll exch 2 {lowerleft cvp} repeat
    exch 2 {upperright cvp} repeat flush
    restore
    *End
    *% These provide the physical dimensions of the paper (by keyword)
    *DefaultPaperDimension: Letter
    *PaperDimension Letter: "612 792"
    *PaperDimension Letter.Transverse: "612 792"
    *PaperDimension Legal: "612 1008"
    *PaperDimension Ledger: "1224 792"
    *PaperDimension Tabloid: "792 1224"
    *PaperDimension A3: "842 1191"
    *PaperDimension A4: "595 842"
    *PaperDimension A4.Transverse: "595 842"
    *PaperDimension A5: "420 595"
    *PaperDimension B4: "729 1032"
    *PaperDimension B5: "516 729"
    *PaperDimension B5.Transverse: "516 729"
    *PaperDimension Statement: "396 612"
    *RequiresPageRegion All: True
    *OpenUI *InputSlot: PickOne
    *OrderDependency: 20 AnySetup *InputSlot
    *DefaultInputSlot: Upper
    *InputSlot Upper: "0 statusdict /setpapertray get exec"
    *InputSlot Lower: "1 statusdict /setpapertray get exec"
    *?InputSlot: "
    save
    [ (Upper) (Lower) ] statusdict /papertray get exec
    (get exec) stopped ( pop pop (Unknown)} if = flush
    restore
    *End
    *CloseUI: *InputSlot
    *OpenUI *ManualFeed: Boolean
    *OrderDependency: 20 AnySetup *ManualFeed
    *DefaultManualFeed: False
    *ManualFeed True: "statusdict /manualfeed true put"
    *ManualFeed False: "statusdict /manualfeed false put"
    *?ManualFeed: "
    save
    statusdict /manualfeed get {(True)}{(False)}ifelse = flush
    restore
    *End
    *CloseUI: *ManualFeed
    *DefaultOutputOrder: Reverse
    *% Font Information =====================
    *% This datap462.ppd is provided by fontsolutions.tar
    *DefaultFont: Courier
    *Font ArialMT: Standard "(001.004)" Standard ROM
    *Font Arial-ItalicMT: Standard "(001.004)" Standard ROM
    *Font Arial-BoldMT: Standard "(001.004)" Standard ROM
    *Font Arial-BoldItalicMT: Standard "(001.004)" Standard ROM
    *Font ArialNarrow: Standard "(001.004)" Standard ROM
    *Font ArialNarrow-Italic: Standard "(001.004)" Standard ROM
    *Font ArialNarrow-Bold: Standard "(001.004)" Standard ROM
    *Font ArialNarrow-BoldItalic: Standard "(001.004)" Standard ROM
    *Font CourierNewMT: Standard "(001.004)" Standard ROM
    *Font CourierNew-ItalicMT: Standard "(001.004)" Standard ROM
    *Font CourierNew-BoldMT: Standard "(001.004)" Standard ROM
    *Font CourierNew-BoldItalicMT: Standard "(001.004)" Standard ROM
    *Font Courier: Standard "(001.004)" Standard ROM
    *Font Courier-Bold: Standard "(001.001)" Standard ROM
    *Font Courier-BoldOblique: Standard "(001.001)" Standard ROM
    *Font Courier-Oblique: Standard "(001.001)" Standard ROM
    *Font Helvetica: Standard "(001.001)" Standard ROM
    *Font Helvetica-Bold: Standard "(001.001)" Standard ROM
    *Font Helvetica-BoldOblique: Standard "(001.001)" Standard ROM
    *Font Helvetica-Oblique: Standard "(001.001)" Standard ROM
    *Font IDAutomationSMICR: Standard "(001.001)" Standard ROM
    *Font Symbol: Special "(001.001)" Special ROM
    *Font Tahoma: Standard "(001.001)" Standard ROM
    *Font Tahoma-Bold: Standard "(001.001)" Standard ROM
    *Font Times-Bold: Standard "(001.001)" Standard ROM
    *Font Times-BoldItalic: Standard "(001.001)" Standard ROM
    *Font Times-Italic: Standard "(001.001)" Standard ROM
    *Font Times-Roman: Standard "(001.001)" Standard ROM
    *Font TimesNewRomanMT: Standard "(001.001)" Standard ROM
    *Font TimesNewRoman-BoldMT: Standard "(001.001)" Standard ROM
    *Font TimesNewRoman-BoldItalicMT: Standard "(001.001)" Standard ROM
    *Font TimesNewRoman-ItalicMT: Standard "(001.001)" Standard ROM
    *?FontQuery: "
    save
    /str 100 string dup 0 (fonts/) putinterval def
    count 1 gt
    exch dup str 6 94 getinterval cvs
    (/) print print (:) print
    FontDirectory exch known
    {(Yes)}{(No)} ifelse =
    {exit} ifelse
    }bind loop
    (*) = flush
    restore
    *End
    *?FontList: "
    FontDirectory { pop == } bind forall flush
    (*) = flush
    *End
    *% Printer Messages (verbatim from printer):
    *Message: "%%[ exitserver: permanent state may be changed ]%%"
    *Message: "%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%"
    *Message: "\FontName\ not found, using Courier"
    *% Status (format: %%[ status: <one of these> ]%% )
    *Status: "idle"
    *Status: "busy"
    *Status: "waiting"
    *Status: "printing"
    *Status: "warming up"
    *Status: "PrinterError: BD check"
    *Status: "PrinterError: Paper jam"
    *Status: "PrinterError: Replace toner bag"
    *Status: "PrinterError: Warming up"
    *Status: "PrinterError: Timing error"
    *Status: "PrinterError: Fuser check"
    *Status: "PrinterError: Cover opened"
    *Status: "PrinterError: Toner empty"
    *Status: "PrinterError: Empty & reset output bin(s)"
    *Status: "PrinterError: Sorter or jogger error"
    *Status: "PrinterError: Scanner check"
    *% Input Sources (format: %%[ status: <stat>; source: <one of these> ]%% )
    *Source: "serial9"
    *Source: "serial25"
    *Source: "AppleTalk"
    *Source: "Centronics"
    *% Printer Error (format: %%[ PrinterError: <one of these> ]%%)
    *PrinterError: "BD check"
    *PrinterError: "Paper jam"
    *PrinterError: "Replace toner bag"
    *PrinterError: "Warming up"
    *PrinterError: "Timing error"
    *PrinterError: "Fuser check"
    *PrinterError: "Cover opened"
    *PrinterError: "Toner empty"
    *PrinterError: "Empty & reset output bin(s)"
    *PrinterError: "Sorter or jogger error"
    *PrinterError: "Scanner check"
    *%DeviceAdjustMatrix: "[1 0 0 1 0 0]"
    *% Color Separation Information =====================
    *DefaultColorSep: ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi
    *InkName: ProcessBlack/Process Black
    *InkName: CustomColor/Custom Color
    *InkName: ProcessCyan/Process Cyan
    *InkName: ProcessMagenta/Process Magenta
    *InkName: ProcessYellow/Process Yellow
    *% For 60 lpi / 300 dpi =====================================================
    *ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
    *ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
    *ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
    *ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
    *ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
    *ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
    *% For 53 lpi / 300 dpi =====================================================
    *ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
    *ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
    *ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
    *ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
    *ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
    *ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
    *ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
    *ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
    *ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
    *ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
    *% For "Dataproducts LZR 2665" version 46.2
    *% Produced by "GETapd.ps" version 2.0 edit 47
    *% Converted to meet 4.0 specification
    *% Last Edit Date: Sep 15 1992
    *% The byte count of this file should be exactly 011228 or 011572
    *% depending on the filesystem it resides in.
    *% end of PPD file for Dataproducts LZR 2665

    If you want to make platform independent use of fonts, you have to use the family, such as sans serif.
    Arial is owned by monotype (http://monotype.com/). You have to contact them if you wish to redistribute it with your application. They also might have a suitable version that renders nicely under linux.
    Pete

  • Color saturation problem in Acrobat Reader 7.0.9 under Linux

    Hi,
    I'm working with a guy who is producing PDFs of my work with Indesign.
    Using acrobat reader under Linux (version 7.0.1 and also 7.0.9), the colours in these PDFs always appear very saturated. This is a big problem for me because I cannot see with the reference viewer the results of PDFs to be sent to print.
    I tried the same pdf file under OS X & Windows, it appears OK with Acrobat reader. Other free pdf readers under Linux also show the right colours (but not always the transparency ;-).
    Does anybody has an idea to help me?
    @Adobe people: in case you want to test, I drop a copy of my PDF file at: http://cardot.net/files/pdfcolours.pdf (2.24 MB)
    Thanks in advance
    Jean-Christophe Cardot

    We are able to reproduce color saturation problem at our end. We have noted down and will work on this.
    Thanks.

  • How to do a ping with ICMP in Java under Linux?

    Does anyone know an easy way to do a ping with ICMPs under Linux? I did it under Windows, but under Linux, I've got some issues. I need a procedure that sends a ping with a id number and a seq number and another function pong that waits for a reply and returns the seq and id of the packets it received.
    if anyone did this, please tell me how. I know it should be a native method, but how do I implement it...

    rigth, i thought of that. but imagine that i have something like 100 hosts wich i must ping something like 20 times and get all the results in something like 5 seconds.
    so i don't think that runtime will be a solution because that kind of pings tend to be safe and wait 1 sec between 2 succesive pings in order to prevent a flood.
    i already did it in windows with a native dll. but i'm not so experienced in linux... :( so, if anyone can help...please do

  • NI-VISA step by step configuration under linux

    Hi!
    I need to connect and acquire a codebar reader connected to RS232.
    I have: P4 2.4GHz with PCI6023E, mdk 9.1, LV 6.1 comedi, nicvirte and nivisaserver - nivisa drivers correctly installed and running. Serials RS232 are named ttyS00 and ttyS01 under /dev. devfs is running.
    Q:Which name belongs to ttyS0x under linux?
    Q:There are some literature on this arg?
    note: running "find Serial ports.vi" and probing "VISA find resource" icon the result is:
    'ASRL1::INSTR' (=> ttyS01?)
    Well, trying to read a barcode, with 'LabVIEW <-> Serial.vi' i have no error and no reading. note cpu load for lv process go to 99%!
    Any advice?? thanks in advance!
    tetractis

    Hi,
    I find a few things strange here. First normally linux distributions name the serial ports ttySx (where Com1 == ttyS0, Com2 == ttyS1, ...).
    Is this just the way mandrake sets things up or is there somthing else at play here?
    Secondly make sure that you have +rw permissions for the ports you are trying to get at.
    You may also want to test functionality by using something like minicom to test that the data is comming into the port and being transmitted/received correctly.
    Hope this helps out!
    Aaron K.
    Application Engineer
    National Instruments

  • Satellite Pro L300 - ACPI issues under Linux: buggy dsdt implementation

    Hi, I have an L300 with Insyde 1.50 BIOS and I have been struggling with ACPI under Linux (as have many others, the web is littered with hacks and workarounds for this notebook). After enabling acpi debugging in the kernel, I noticed that some capabilites were marked as unsupported. Decompiling and recompiling with Intel's iasl, I noticed this:
    Method (_OSC, 5, NotSerialized)
    Store (Arg3, Local0)
    Multiply (Local0, 0x04, Local1)
    Name (BUF1, Buffer (Local1) {})
    Store (Arg4, BUF1)
    Store (Zero, Local1)
    Store (Zero, Local2)
    While (Local0)
    Multiply (Local1, 0x04, Local2)
    CreateDWordField (BUF1, Local2, CAPB)
    If (Arg2)
    If (LEqual (Local1, Zero))
    And (CAPB, 0xFFFFFFFC)
    Else
    Increment (Local1)
    Decrement (Local0)
    Return (BUF1)
    Clearly this does not follow the ACPI spec (of which Toshiba is(was?) an active partner listed on all the documentation). From my limited understanding of the spec:
    1) Method(_OSC... should list 4 rather than 5 args
    2) Method (_OSC... should be Serialized as it contains a Name declaration.
    2a) Alternatively the Name(.... declaration could be replaced with a local variable of some sort?
    3) And (CAPB, 0xFFFFFFFC) should have a result field. I looked for side effects in the spec, but found none, so really this whole if else block does nothing as far as I can see. This is where my understanding of the spec lets me down. I'm not really sure what the original intent of the code is, so I don't know what it should be doing (although my best guess is that is supposed to apply a bit mask to BUF1?).
    I hope someone more knowledgeable can help me resolve this with either a BIOS upgrade for this notebook (best) or a temporary fix to my DSDT so that I can send sufficient info for the Linux ACPI developers work around the problems (not as good because it leaves other alternative OS's out of the loop).
    Thanks for your time and consideration
    Phen.

    hi phoenp,
    seems that you are realy deep in this stuff ...
    how about joining a developer group - i am not kidding!
    if you get this kernel running with workarounds and / or able to fix this bios
    i am sure you will be needed to support a developer group.
    as long as models like this is sold with windows the support on linux will be poor.
    developing drivers for only one special notebook is too expensive...

  • JCombox does not work under linux (fedora) could you help me???

    Hi All,
    I am implementing a GUI for a linux application. This GUI works fine under windows system. But the JCombobox does not work under Linux system. Would you help me to solve it? Thank you very much!..
    The problem is that I cannot select any other item except the first item in the dropdown box of JCombobox. There is no event generated when I click the combobox, while events are generated for other Buttons.
    This problem exists for the following code when I maximize the window. When the window is minimize to some extend in my problem, it is OK.
    Here is the simplify code:
    import java.awt.*;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.io.Serializable;
    import java.util.Vector;
    import javax.swing.ComboBoxModel;
    import javax.swing.JComboBox;
    import javax.swing.JFrame;
    import javax.swing.event.ListDataEvent;
    import javax.swing.event.PopupMenuEvent;
    import javax.swing.event.PopupMenuListener;
    import java.awt.event.*;
    import javax.swing.*;
    //carmen
    import javax.swing.filechooser.*;
    import javax.swing.event.*;
    import javax.swing.Box;
    import javax.swing.BoxLayout;
    import javax.swing.border.*;
    //import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
    //import AlwaysSelectableComboBoxDemo.AlwaysSelectableComboBox;
    import java.io.*;
    import java.util.*;
    import java.lang.String.*;
    public class Test extends JFrame
         private JComboBox jComboBox1;
         private JComboBox jComboBox2;
         private JPanel contentPane;
         private JTabbedPane jTabbedPane1;
         //Main Tab
         private JPanel Main;
         private JPanel OutputSimSet;
         private JPanel Test;
         private JPanel ScriptGenTab;
         private JPanel ResultTab;
    //Result Tab
    private JPanel SimResult;
         public Test()
              super();
              //initializeComponent();
              contentPane = (JPanel)this.getContentPane();
              jTabbedPane1 = new JTabbedPane();
              Main = new JPanel();
              OutputSimSet = new JPanel();
              Test = new JPanel();
              ScriptGenTab = new JPanel();
              ResultTab = new JPanel();
              SimResult = new JPanel();
         jComboBox1 = new JComboBox(
                        new String[]{"Item 1","Item 2", "Item 3"});
                        jComboBox1.addActionListener(new ActionListener() {
                        public void actionPerformed(ActionEvent ae) {
                        System.out.println("Yeah");
         jComboBox2 = new JComboBox(
                                  new String[]{"Item 1","Item 2", "Item 3"});
                                  jComboBox2.addActionListener(new ActionListener() {
                                  public void actionPerformed(ActionEvent ae) {
                                  System.out.println("Yeah");
              // jTabbedPane1
              jTabbedPane1.addTab("Main", Main);
              jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
              jTabbedPane1.addTab("Simulation Result", ResultTab);
              jTabbedPane1.addChangeListener(new ChangeListener() {
                   public void stateChanged(ChangeEvent e)
                        jTabbedPane1_stateChanged(e);
              // contentPane
              contentPane.setLayout(new BorderLayout(0, 0));
              contentPane.add(jTabbedPane1, BorderLayout.CENTER);
              // Main
              //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
              Main.setLayout(new BorderLayout(0, 0));
              Main.add(OutputSimSet,BorderLayout.NORTH);
              OutputSimSet.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
              OutputSimSet.add(Test, 0);
              Test.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
              Test.add(jComboBox1,0);
              //ResultTab
              ResultTab.setLayout(new BorderLayout(0, 0));
              ResultTab.setBorder(new TitledBorder(""));
              ResultTab.add(SimResult, BorderLayout.NORTH);
              SimResult.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
              SimResult.add(jComboBox2,0);
              // Test
              this.setTitle("Test");
              this.setLocation(new Point(0, 0));
              this.setSize(new Dimension(600, 500));
              this.setVisible(true);
         public void initializeComponent()
         /** Add Component Without a Layout Manager (Absolute Positioning) */
         private void addComponent(Container container,Component c,int x,int y,int width,int height)
              c.setBounds(x,y,width,height);
              container.add(c);
         // TODO: Add any appropriate code in the following Event Handling Methods
         private void jTabbedPane1_stateChanged(ChangeEvent e)
              System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
              // TODO: Add any handling code here
         // TODO: Add any method code to meet your needs in the following area
         // TODO: Add any appropriate code in the following Event Handling Methods
         private void jComboBox1_actionPerformed(ActionEvent e)
              System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
              Object o = jComboBox1.getSelectedItem();
              System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
              // TODO: Add any handling code here for the particular object being selected
    * Create the GUI and show it. For thread safety,
    * this method should be invoked from the
    * event-dispatching thread.
    private static void createAndShowGUI() {
    //Create and set up the window.
    Test frame = new Test();
    frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    frame.pack();
    frame.setVisible(true);
    public static void main(String[] args) {
    //Schedule a job for the event-dispatching thread:
    //creating and showing this application's GUI.
    javax.swing.SwingUtilities.invokeLater(new Runnable() {
    public void run() {
    createAndShowGUI();
    }

    package oct03_JCBox;
    import java.awt.BorderLayout;
    import java.awt.Component;
    import java.awt.Container;
    import java.awt.Dimension;
    import java.awt.FlowLayout;
    import java.awt.Point;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JComboBox;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.JTabbedPane;
    import javax.swing.event.ChangeEvent;
    import javax.swing.event.ChangeListener;
    public class Test extends JFrame
    private JComboBox jComboBox1;
    private JComboBox jComboBox2;
    private JPanel contentPane;
    private JTabbedPane jTabbedPane1;
    //Main Tab
    private JPanel Main;
    //private JPanel OutputSimSet;
    //private JPanel Test;
    private JPanel ScriptGenTab;
    private JPanel ResultTab;
    //Result Tab
    //private JPanel SimResult;
    public Test()
         super();
         //initializeComponent();
         contentPane = (JPanel)this.getContentPane();
         jTabbedPane1 = new JTabbedPane();
         Main = new JPanel();
         ScriptGenTab = new JPanel();
         ResultTab = new JPanel();
    //     OutputSimSet = new JPanel();
    //     Test = new JPanel();
    //     SimResult = new JPanel();
         jComboBox1 = new JComboBox(
         new String[]{"Item 1","Item 2", "Item 3"});
         jComboBox1.addActionListener(new ActionListener() {
         public void actionPerformed(ActionEvent ae) {
              System.out.println("Yeah");
         jComboBox2 = new JComboBox(
         new String[]{"Item 1","Item 2", "Item 3"});
         jComboBox2.addActionListener(new ActionListener() {
              public void actionPerformed(ActionEvent ae) {
                   System.out.println("Yeah");
         // Main
         //Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
         Main.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
         Main.add(jComboBox1);
         //ResultTab  -----     
         ResultTab.setLayout(new FlowLayout(FlowLayout.CENTER, 5, 5));
         ResultTab.add(jComboBox2);
        //      jTabbedPane1
         jTabbedPane1.addTab("Main", Main);
         jTabbedPane1.addTab("ScriptGenerator", ScriptGenTab);
         jTabbedPane1.addTab("Simulation Result", ResultTab);
         jTabbedPane1.addChangeListener(new ChangeListener() {
              public void stateChanged(ChangeEvent e)
                   jTabbedPane1_stateChanged(e);
         // contentPane
         contentPane.setLayout(new BorderLayout(0, 0));
         contentPane.add(jTabbedPane1, BorderLayout.CENTER);
         // Test
         this.setTitle("Test");
         this.setLocation(new Point(0, 0));
         this.setSize(new Dimension(600, 500));
         this.setVisible(true);
         public void initializeComponent()
    //     /** Add Component Without a Layout Manager (Absolute Positioning) */
    //     private void addComponent(Container container,Component c,int x,int y,int width,int height)
    //     c.setBounds(x,y,width,height);
    //     container.add(c);
         // TODO: Add any appropriate code in the following Event Handling Methods
         private void jTabbedPane1_stateChanged(ChangeEvent e)
         System.out.println("\njTabbedPane1_stateChanged(ChangeEvent e) called.");
         // TODO: Add any handling code here
         // TODO: Add any method code to meet your needs in the following area
         // TODO: Add any appropriate code in the following Event Handling Methods
    //     private void jComboBox1_actionPerformed(ActionEvent e)
    //     System.out.println("\njComboBox1_actionPerformed(ActionEvent e) called.");
    //     Object o = jComboBox1.getSelectedItem();
    //     System.out.println(">>" + ((o==null)? "null" : o.toString()) + " is selected.");
    //     // TODO: Add any handling code here for the particular object being selected
         * Create the GUI and show it. For thread safety,
         * this method should be invoked from the
         * event-dispatching thread.
         private static void createAndShowGUI() {
         //Create and set up the window.
         Test frame = new Test();
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         frame.pack();
         frame.setVisible(true);
    public static void main(String[] args) {
         //Schedule a job for the event-dispatching thread:
         //creating and showing this application's GUI.
         javax.swing.SwingUtilities.invokeLater(new Runnable() {
         public void run() {
         createAndShowGUI();
    } Try this - you use too many unnecessary JPanels.
    Which way you prefer with actionPerformed should work either way.
    I think your problem was too many unnecessary Panels and set all attributes before it is added, perhaps,
    not add the panel first and then try to set attributes like layout, color, etc...

  • HTTPS upload failed under Linux Error #2038

    HI,
    we're developing  Flex based framework, focusing on, among the others, file upload. Everything is fine and works well for the browsers Opera, Firefox, Chrome under the Windows/Mac OS/Linux in the http mode. Unfortunately in https we are unable to upload files, using the same application under Linux ( all browsers fail with that ).
    The result is as follows:
    I've found a similar looking bug here:
    https://bugbase.adobe.com/index.cfm?event=bug&id=2980517
    but it differs from our case since we're experiencing that problem only under Linux ( all browsers in their latest versions ). I tried both the latest Flash plugin ( stable ) and the 11 bet version. The same effect.
    I would be gratefull for any hints on that. If there will be a need I can arrange a demosite with an application to perform some tests. I'm not excatly sure wheter this forum is the right place to ask for such issue, if not please point me to the correct place.
    Regards,
    Piotr

    I have the same error # 2038 problem , when search google there has the kind of problem since 2008 , which cause many factor :
    my code : is easy form flex -> air run to mobile iphone upload image to tomcat server.
    //private const serverURL:String = "http://localhost:8400/aii-mobile-services-1.0-SNAPSHOT/imageupload"; //work
    private const serverURL:String = "http://192.9.xxx.xxx:8400/aii-mobile-services-1.0-SNAPSHOT/imageupload"; // error # 2038
                    file.addEventListener( Event.COMPLETE, uploadComplete );
                    file.addEventListener( IOErrorEvent.IO_ERROR, ioError );
                    try
                        //file.upload( new URLRequest( serverURL ) );
                        //fileUpload.upload( new URLRequest( serverURL ) );
                        var request:URLRequest = new URLRequest(serverURL);                   
                        var params:URLVariables = new URLVariables();
                        params.name = id_refnumber;
                        params.userid = "AII-IT-DEV";
                        request.method = URLRequestMethod.POST;
                        request.contentType = "multipart/form-data";
                        request.data = params;
                        file.upload(request,"file");
                    catch( e:Error )
                        trace( e );
                        currentState = "unsupported";
                        msg.text = e.toString();
                    finally {
    The server is tomcat and servlet is /imageupload
    The  point is when I test air / mobile  for  local host is work perfectly but when I point to real server I was punch by #2038
    - When I test with html form upload image to servlet (/imageupload)  and it worked both local , server machine ( so firewall stuff may not the factosr.)
    If I found the way out I will come back to update
    or someone know this trick  to fix this case would be make me happy
    sorry for my bad english

  • Compile MatrixX Autocode under Linux

    Hi, I try to compile my autocoded code under Linux and I got problem at the compilation and at the link.
    Everything is working fine under windows....
    First Problem. When I switch to linux I got a error at the compilation :
         error: ‘Matrix_Inverse’ was not declared in this scope
    Matrix_Inverse is part of sa_matrix.c that was compile before without any problem. Any Idea ? You can find the makefile in attachement.
    Second error is during the link. If I put the Matrix_Inverse callout, I able to compile. When it's time to link everything, I got those error:
           TEST_CONTROLPC.o: In function `SCHEDULER':TEST_CONTROLPC.c.text+0x1fb41): undefined reference to `External_Input'
            :TEST_CONTROLPC.c.text+0x1fb91): undefined reference to `External_Output'
            :TEST_CONTROLPC.c.text+0x1fceb): undefined reference to `Error'
            :TEST_CONTROLPC.c.text+0x1fe0f): undefined reference to `Error'
            TEST_CONTROLPC.o: In function `main':TEST_CONTROLPC.c.text+0x218eb): undefined reference to `Implementation_Initialize'
            :TEST_CONTROLPC.c.text+0x218f0): undefined reference to `Background'
            :TEST_CONTROLPC.c.text+0x218fa): undefined reference to `Implementation_Terminate'
            NGC-sa_utils_bin.o: In function `Background()':NGC-sa_utils_bin.c.text+0x313): undefined reference to `SCHEDULER
    It's look that it's not able to find function declare in the NGC-sa_utils_bin.c (little adaptation of sa_utils.c). Any idea on that ?
    Thanks a lot
    Attachments:
    makefile.txt ‏2 KB

    All right, let me resume :
    We have successfully AutoCode a
    MATRIXx model into C code (using default AutoCode template) and compile it on a
    windows based computer with our own makefile. On the windows based computer, we
    have define –DMSWIN32 in the makefile in order to compile the model.
    The result from the AutoCoded
    version and the result from the MATRIXx model are the same (diff of
    x10-6). Now we want to move the AutocCoded model on a RT-Linux based
    computer.
    Is
    there any other define we should include in the
    makefile?
    Target computer: RTAI_Linux on
    a FEDORA Linux
     And Now to solve the first problem :
            NGC-sa_utils_bin.o: In function
    `Background()':NGC-sa_utils_bin.c .text+0x313): undefined
    reference to `SCHEDULERTo bypass the problem, we have
    made a small modification in order to be able to compile the code. We have
    remove the declaration of SCHEDULER() in the procedure Background in the
    sa_utils.h and sa_utils.c file.
     sa_utils.c
    //extern void SCHEDULER
     sa_utils.h
    //EXTERN_FUNC (void SCHEDULER, (
     We have then created the header
    file (same name as the model) to declare this SCHEDULER
    procedure:
     EXTERN_FUNC (void SCHEDULER, (
     We then run the code and write
    outputs in binary to a file. We read them back on a windows based computer to
    conclude that the results are not the same of the MATRIXx
    model.What do you think ?
    Charley

  • Mounting a BeOS Filesystem under Linux - Is it possible?

    Hello everyone,
    Is there a stable way to mount the BeOS filesystem used by haiku OS under Linux? I found a few experimental ways but the information seems outdated and only supports the 2.2 kernel, ideas?

    Blue Peppers wrote:
    sudo mount /dev/<partition> /media/<place> -t befs -o iolocalset=utf8
    suport has been in the linux kernel since 2.4 apparently, though the page I got this from said it was readonly. However, that was from 2006, so..
    from http://www.freelists.org/post/haiku/Mou … ux-distros (i.e. the first google result for 'mount befs linux')
    Alright, I'll try it when I get home - I did a Google search and I didn't find a whole lot. However, I am at work and I couldn't access some web sites. All it needs to be is readonly since I am just retieving some data from Haiku as I don't really trust aphla software.
    Thanks,

  • Loss of keyboard focus in Java appl running under linux

    I have a small sample program that replicates my problem. When this program is run a window is created. If you select File->New another instance of the program window is created. Now if you try to go back and bring to front the first window, keyboard focus is not
    transferred when run under linux. You can only type in the second window. The expected behavior does happen in Windows.
    > uname -a
    Linux watson 2.6.20-1.2933.fc6 #1 SMP Mon Mar 19 11:38:26 EDT 2007 i686 i686 i386 GNU/Linux
    java -versionjava version "1.5.0_11"
    Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_11-b03)
    Java HotSpot(TM) Client VM (build 1.5.0_11-b03, mixed mode, sharing)
    javac -versionjavac 1.5.0_11
    import java.awt.event.*;
    import javax.swing.*;
    class SwingWindow extends JFrame {
        SwingWindow() {
         super("SwingWindow");
         JMenuBar menuBar = new JMenuBar();     
            JMenu fileMenu = new JMenu("File");
            JMenuItem newItem = new JMenuItem("New");
            newItem.addActionListener(new ActionListener() {
                public void actionPerformed(ActionEvent event) {
              SwingWindow.createAndShowGUI();
         fileMenu.add(newItem);
            menuBar.add(fileMenu);
            setJMenuBar(menuBar);
            setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);       
         JTextField text = new JTextField(200);
         getContentPane().add(text);
         pack();
         setSize(700, 275);
        public static void createAndShowGUI() {
            JFrame frame = new SwingWindow();
            frame.setVisible(true);
        public static void main(String[] args) {
            javax.swing.SwingUtilities.invokeLater(new Runnable() {
                public void run() {
                    createAndShowGUI();
    }

    You can implement the FocusListener interface. When
    the first JFrame gains focus, call
    text.requestFocusInWindow(). I hope this helps.The call requestFocusInWindow is not helping, perhaps even making it worse.
    The problem seems to be that I am in the situation where the call
    KeyboardFocusManager.getCurrentKeyboardFocusManager().getPermanentFocusOwner()
    is returning the expected Component. The problem is that the KeyListener class that is registered with the Component is not being called when a key is being pressed.
    The issue is that I have a component that has the keyboard focus, but the KeyListener class
    is not responding.
    This seems to be a linux only problem which makes it only mysterious.

  • How to enable OCR with Scangear MP under Linux for MG8250?

    Under Linux openSUSE 12.3 I use Scangear MP 1.80 for my Canon PIXMA MG8250.
    As a scan target (in my German GUI it's "Ziel") I can choose "OCR". But there is no text output, the scan is just saved as a picture. How can I configure Scangear to open the scan via Tesseract in a text editor.
    By the way, the target "Print" (in German "Drucken") leads to saving just as well, though there is at least one printer at hand, of course.
    It's a pity that the pixma scan drivers that are shipped with openSUSE don't work with xsane (the scanner starts working, but stops after one third of the page). Using xsane with a different scanner I can use OCR successfully.
    Volker

    There are two basic types of core OCR algorithm, which may produce a ranked list of candidate characters.
    Matrix matching involves comparing an image to a stored glyph on a pixel-by-pixel basis; it is also known as "pattern matching" or "pattern recognition". This relies on the input glyph being correctly isolated from the rest of the image, and on the stored glyph being in a similar font and at the same scale. This technique works best with typewritten text and does not work well when new fonts are encountered. This is the technique the early physical photocell-based OCR implemented, rather directly.
    Feature extraction decomposes glyphs into "features" like lines, closed loops, line direction, and line intersections. These are compared with an abstract vector-like representation of a character, which might reduce to one or more glyph prototypes. General techniques of feature detection in computer vision are applicable to this type of OCR, which is commonly seen in "intelligent" handwriting recognition and indeed most modern OCR software. Nearest neighbour classifiers such as the k-nearest neighbors algorithm are used to compare image features with stored glyph features and choose the nearest match.
    Software such as Cuneiform and Tesseract use a two-pass approach to character recognition. The second pass is known as "adaptive recognition" and uses the letter shapes recognized with high confidence on the first pass to better recognize the remaining letters on the second pass. This is advantageous for unusual fonts or low-quality scans where the font is distorted.
    So I wonder which kind of OCR algorithm are you using?

Maybe you are looking for

  • ICal no longer syncing between phone and MBP

    my macbook pro and motorola razr are no longer syncing with my ical...during the sync it says it is syncing it but nothing i add to ical is getting to the phone. address book is syncing normally (or as normal as the razr is capable of). any help appr

  • Firefox says my Dishmail connection is untrusted. How can I get into my dishmail now?

    I use Dishmail for my email. Now Firefox will not let me access it. The message is that the connection is not trusted. I have checked the address repeatedly. I cannot bypass this to open my email through Firefox. I have retyped the address, gone thro

  • Re: ALV OUTPUT

    Dear Experts,         I have a report which is displaying 2 types of reports( based on the selection of radio button in selection screen assembly report, production report) both are having same fields and different fieldcatalogs Now, My requirement i

  • Unable to get Audit logs for Data Mining Model Oracle11g

    Hi All, I followed all the steps given below 2 links but not getting any audit logs. http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/install_odm.htm#DMADM024 http://download.oracle.com/docs/cd/B28359_01/datamine.111/b28130/schemaobjs

  • Calling compiled subroutines

    I would like to programmatically call (load and unload) subroutines from a VI.  There must be a way to do it, but I haven't quite figured it out. First the scenario: ABSTRACT SCENARIO: I have a LabView VI that will end up being compiled into an EXE.